[MM] possible display of bike Bug, flashes quickly

Similar Questions

• Wacom Cintiq Companion 2 + bug Flash Adobe ~ brush "jumps" on screen during the development

  Equipment - Wacom Cintiq supplementary 2

  Software - Adobe Flash CC 2015 (as well as 2014 and CS6... same bug replicated)

  Drivers - Wacom 6.3.11 - 4 ~ ~ ~ and Intel Iris Graphics 6100 version 10.18.14.4170

  OS - Windows 8.1

  Let me start by saying 2 things:

  1. I've seen other posts similar to this issue, but often they resolve themselves by having disconnected and reconnected the cintiq or intuos in the computer. Given that the roommate of Wacom Cintiq is a stand-alone tablet computer running Windows 8 (.1), is not an option

  2 spoiler alert... I have a solution for the symptom: change the text in the 'small 100%.' The problem, as I will describe below, is that it is a workaround for the symptom, and it does not solve the bug itself.

  First... the question. In the image below, '1 2 3' on the left was drawn with Wacom pen using the Brush tool. '1 2 3' in the top-middle has been designed with my finger on the touch screen of the Companion 2. The lines right are actually 'points' that I did with the pen that jump radially out of a given time in the top right of the screen.

  

  Second... the 'solution '. Change the display of the scale 'Small 100% ' (located in the control panel > hardware and audio > display...) Notice the orange arrow). I have attached an image with the parameter as seen in point 8.1 of Windows (see below). Now, it will solve the problem of the tip of pen jump away from the position of the real pencil.

  

  Third... Here's my problem. The Wacom Cintiq Companion 2 HD display is 2560 x 1440. The default setting for Windows 8 for this tablet has a text value scaling of 175%. The high screen resolution allows more work space real estate within Flash and windows of text scaling allows me to be able to read words and see the icons without forcing (because the actual size of the screen itself is relatively low compared to its resolution capabilities). After this "difficulty", so actually nothing appears on the screen, I need to lower the resolution of the tablet to the most 1920 x 1080 (meaning with scaling to 100%, yet the text is quite small, but it's a compromise to keep some of these program workspace real estate mentioned previously).

  I was encouraged to do this post, so it could be a quick response to the immediate symptom of the brush jumping bug, leaving people less able to do their work without a break and ALSO so that we can go beyond to know if there is a more permanent solution to the problem. NOTE: Photoshop works like a dream. This is only a Flash issue (for me).

  Finally, here are some details of troubleshooting, I already went through that does nothing to solve the underlying problem:

  -all drivers have been updated

  -the most recent version of Flash has been downloaded

  -Flash has been uninstalled (properties of withdrawal) and reinstalled

  Wacom - driver has been uninstalled and reinstalled

  Wacom user properties - were removed and re-configured

  -Ink Windows has been disabled (which disables the pressure sensitivity) and recontroler

  -Press- and - hold right-click has been disabled in Windows Tablet properties

  -Shortcuts have been disabled in Windows Tablet properties

  ... There is more (like resetting windows at the factory and the resettlement without updating the drivers) also has nothing, but these are the most relevant elements. I was told that Adobe was aware of the problem and that it would be resolved. My goal is to discover a possible ETA on this difficulty and how it might come on (updated internal Flash? Layout workaround in Windows?) ... or, better yet, if it already exists! Like many people, Flash is the main program I use for work and I travel a lot (where the Wacom Cintiq purchase additional 2). This is a bug quite important that I would like to see resolved, if there is not yet, or answered here so she a. thanks team!

  UPDATE for WINDOWS 10

  To recap: I mentioned in the original post I made above that the bug Flash jump at the heart of this message seems to be caused by a scaling function in Windows. This feature exists because of situations like mine where I own a portable tablet (Wacom Cintiq Companion 2) with a physical screen size relatively small, but the high resolution capability. High resolution is good because computing means that signs Flash will take up less screen real estate, allowing more space for work/workshop space. However, high resolution on a small screen also means that things like icons and the text of the window are very small and difficult to read. That's what the functionality of scaling in Windows has compensation for... but it also caused a problem with the brush (see images/posts earlier).

  (Apparently) there is a new feature in Windows 10 which allows you to increase the TEXT size without scaling of all the features of display (such as icons).

  * Now I'm able to put my small screen of the actual size of a high-resolution AND can't read the text in things like menus and icons without the jump bug.* *.

  I hope this helps some of you out there with this similar problem. Remember, no matter what you do... Make sure that the scale is set to "Smaller - 100%" as I did in the original post. Happy drawing!

  

• Cursor flashing quickly on Equium A100-306

  Having bought my new laptop A100-306 in December, I have now problems with the cursor flashes quickly (and disappears completely when the mouse is not moved) on some applications/games such as the Sims 2 and Home Designer 3D 3D.

  I downloaded the latest driver for the graphics card intel 945 GM, but there is still no improvement. The problem is that I don't see where the mouse is that if I continue to move and even in this case the fast blink is very annoying.

  If anyone knows how to cure the Please this problem and if it's a common problem with this model? As far as I can remember, we had a week without a problem when we first loaded the Sims 2 initially.

  Any help would be appreciated!

  Concerning

  Giles

  Is - it the same cursor flicker problem also with common application like MS Word or excel for example?
  If note, I assume that this has nothing to do with the laptop but with games

  It of possible that the simple Intel 945GM graphics card 8 MB - 128 MB shared memory is not powerful enough to play games and 3D applications.

  PS: Try to change some settings in the Intel graphics card settings. You will find the 3D settings button. You may need to activate something. Play a bit with this function

• I can't change my avatar in the windows games hub 8; I can navagate to the menu, but my avatar flashes quickly and I can't change it.

  When I try to use the avatar editor in the games hub in Windows 8 Pro, my avatar is displayed flashing quickly and all new selections that I'm trying to do not appear on the avatar. simply, it continues to blink.

  For reference,.

  I uninstalled then reinstalled the app games.

  I am running Windows 8 Pro 64 - bit on a dell 1558 studio

  I have a dual-boot system

  I think it could be a kind of flash edition (it looks like a lot when you do not have the software to update flash player on some Web pages).

  Any help will be appreciated.

  Thank you.

  Hi Alexander,.

  Thanks for posting your query in the Microsoft community!
   
  I understand that you can not change the avatar in the game hub.
   
  I suggest you to contact Xbox support for assistance on this issue.
   
  Xbox support
   
  http://forums.Xbox.com/xbox_forums/xbox_support/default.aspx
   
  Xbox on Windows 8 FAQ
   
  http://support.Xbox.com/en-us/apps/Windows-8/Windows-8-FAQ
  
  I hope this helps! For more information related to Windows, please post. We're here to help.

• Apple tv led flashing quickly?

  Apple tv led flashing quickly and does not

  Read this:

  Get help with audio, video, or power on Apple TV - Apple Support

• Login screen Windows 7 flashing quickly after Windows Update

  Hello everyone,

  The updates after last night, I have about 40 PC with this question. PC starts to accommodate the screen then freezes and the screen flashes quickly. Same result when it is started in safe mode. All PCs are Dell Vostro 360 s. short of putting form all the I don't know what to do. Ctrl-alt-del does nothing. They are essentially disabled and glued to the fast flashing welcome screen. Looks like a problem with the video driver for me but I have no way to uninstall or install a new one.

  Thanks for any help in advance!

  Hello

  Thanks for posting your question on the Microsoft Forum.

  I suggest you to ask your question in the TechNet forums.

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itpronetworking&filter=AllTypes&sort=lastpostdesc

  TechNet is watched by other computing professionals who would be more likely to help you.

  I hope this helps.

  _______________

  Thank you best regards &,.

  Isha Soni

• Bug Flash possible? Does not work on Windows 7, explorer11

  
  I have a problem with Adobe Flash. It seems is not or to work properly and I'm trying to debug the problem to see if it a bug to Adobe or something else.

  I have two old laptops and new side by side to solve problems, both use the same version of windows 7 home, internet Explorer 11, adobe flash, directx 11, Norton, etc...

  But the newer faster i5 mobile Adobe Flash guard housing on.

  -J' checked (by report) all settings security to explore between all the computers seem to be the same.
  -Flash is enabled in internet explore 11, add-ons
  -latest version of flash has been installed and has been reinstalled (even a copy saved on the disk and run the disk offline).
  -down cache explore 11
  -flushed out of cache from adobe
  -active x of filtering is disabled

  -restart the computer.

  I find it a bit frustrating that what is originally flash malfunction, someone at - it ideas to try?

  on https://helpx.Adobe.com/Flash-Player.html
  It indicates that I installed the latest version

  on the Adobe - Flash Player: settings - global privacy settings panel Manager

  None of the panels is displayed

  but on the http://www.Adobe.com/software/Flash/about/
  It does not display the little saying version information window you have installed x.x.x.x or the red box of adobe bouncing displays it as on my laptop more old. but when you click on the global settings menu it says that you have installed the latest version...

  example: playing a flash game online, www.volvooceanrace.com loading the game asks to open a session, and then you hear sounds and then seems to not load, proceed to others, or crashes. There are 170 000 daily players using this flash game.

  First of all, check that the ActiveX filtering is configured to allow Flash content:

  https://forums.Adobe.com/thread/867968

  Internet Explorer 11 introduced a number of changes both in the way the browser is identified with remote web servers, and how it treats JavaScript for behavior targets specific to Internet Explorer. Unfortunately, this means that content on some sites will be broken until the provider of content changes their site to conform to the new approach to development required by the modern versions of IE.

  You can try to work around these problems by using the compatibility view:

  http://Windows.Microsoft.com/en-us/Internet-Explorer/use-compatibility-view#IE=ie-11

  If it's too inconvenient, using Google Chrome may be a better alternative.

• BUG: Flash straightened curves when you quickly draw

  Curves drawn with the Pencil/Brush tool partially recovered, in particular when establishing quickly. It is very inhibiting to a team of animators and has persisted through the CC versions most recently 14.1.0.96

  
  
  

  The repro steps:

  1. open a new document, and then select the pencil tool.

  2 pencil should be set to smooth. In properties, set smoothing to 0.

  3. draw a line either by using a Wacom Cintiq tablet, mouse or a trackpad Mac. Wait to release the pen/mouse button and look at the representation of your gesture.

  4. release the stylus - curve changes inaccurately or completely straighten an edge.

  5. try a variety of curves at varying speeds.

  6 Zoom 800% and repeat the steps of drawing to see representations of drawing more problematic.

  Results: Drawing with pencil tool is erratic and does not represent the entrance, especially quickly attracted to the curves.

  Expected results: the pencil in Flash CC tool should perform exactly as in versions CS5.5/CS6.

  Note: also occurs with smoothing set to 20-100. Ink changes the line but due to smooth out universally. Ink is supposed to add without editing lines Freehand user, but it seems to be even more smoothing.

  Tested with multiple Macs, OS, Cintiqs/Intuos tablets and drivers up to date

  Similar problem where it is also addressed:

  Flash CC - response slow drawing tablets

  The problem is worse with the pencil with the Brush tool. Some of the recent changes to the Brush tool seem to have eliminated the majority of my problems. However, the pencil tool could use some work so that what you draw is really what you get.

  EDIT: I learned that the paint brush tool essentially replaces the pencil. Although it is more difficult to draw with the Brush tool (because it uses an Overview of the dot instead of a line), its production feels much nicer. Relieved to say that this corrected my original problem.

  Drawing in smooth mode with smoothing set to '0' is the closest to my scheduled drawn race, I've seen in Flash/Animate working over the years (pre creative Cloud). "Ink mode" still eludes me in general; I thought he was supposed to turn off programmatic value and reflect the stroke is drawn.

  I suggest to Adobe is retiring from the pencil tool (and maybe revisit ink) and we can consider this a very serious problem fixed! Hooray! Thank you Adobe.

• is it possible to use a usb flash memory

  Hello

  I wonder, is it possible to use with the new bike g usb flash memory, as in compact z1 xperia:

  http://www.eBay.co.UK/ITM/micro-USB-host-cable-male-to-USB-female-OTG-adapter-for-Android-Tablet-Samsung-/221421517466?PT=UK_Computing_USB_Cables&hash=item338dc03a9a

  (I'm not sell)

  OTG is supported.

  Settings > storage > USB drive

  Please note that people have reported some cables OTG works better than others, so your mileage may vary.

  Mark

  Forums Manager

• Display files created in Flash pro

  Hello

  I recently created an interactive slideshow in Adobe Flash Pro, but when I send to other people, that they may not display .swf files as I can understand, Flash player doesn't seem to be a stand alone program, but rather integrated with different browsers. Is it possible for me to publish my Fla file and give it to other people to display on its own rather than in the browser. The file will be projected on a screen of presentation, so needs to be viewed in full-screen, and we use arrow keys on the keyboard to move the slide to the slide, suggestions and what program can it be read in while now all of its elements. Any help would be great

  If you have the ability to create a projection file that is essentially a stand-alone executable version of the FLA published.

• Display SQL results in flash

  Hi all

  Can someone tell me how I would go about setting up flash to display the results returned by a query SQL, one at a time.  I can work on the query and PHP, but want I want to know, how to do flash take each of them and animate it, including the suspension and the compensation of the full screen, and then continues on a screen of 'new '.  That's essentially a list of events in a database.

  So, while watching the movie in action, you'd see

  White screen

  Event 1 (break)

  Tournament 2 (pause)

  Event 3 (pause)

  (make one pause and fade out)

  New screen

  Event 4

  Event 5

  Event 6

  .. and so on until all the results have been posted.

  Any help much appreciated.  In fact, it is possible that what I need is help as to how to achieve this returning from xml.  It's really the actionscript code that I am lost.

  Thank you

  James

  If you do not have a handle on the management of dynamic content in Flash, and then to the time you should focus on solving just this aspect and save with php/sql/xml eventually.  To creat now just a stufff array you want to treat it the way you want and it works from there.  Eventually, that's what you get when you feed the file, the data anyway.

  As far as the break and the animation of the aspects go, your best bet will be to search Google for a tutorial on perhaps a slideshow or marquee that runs automatically.  Understand how it works, and then find a way to turn it into something that suits your needs.

  The basic tools that you will be after will be the Tween class to animate the Timer class to trigger a break/motion, as well as their respective event listeners.  If you can find some simple tutorials just for these two things separately, you might be able to reason about the merger for what you are after.

• Is it possible to do this with Flash...

  I have a little problem with my blog on MySpace and I'm curious to know if I can solve it by creating

  a Flash header/game for my blog that will allow to solve.

  
  

  I experience common cycles where some days I'll have tons of hits, usually it's just before dark, I go to the club to have fun.  People, never, never how my articles, nor do they subscribe, so I have no way of knowing who is watching (espionage) me so regularly and diligently.  It is beyond annoying.  I also, in the past, encountered problems of real life because people slander me to take things I say out of context, or simply because they are the Queens of drama who get off screwing with people's lives.

  
  

  Now what I want to do, it of essentially take the pyramid with the eye that sees all at the back of the AMERICAN dollar bill, put it in a work of art great, colorful and interactive to the eye looking around, flashing, to look at the user, from, IDK, rage or idealized focus while a selection rectangle then scrolls along the bottom of him telling people that I look at those who look at me , or something like that, while in recording in the background, their friendIDs with a time stamp that will be subsequently updated and transmitted to me on say once a week.

  
  

  This will give me peace of mind knowing who is just browsing, which is friendly and makes it to try to get hurt, things that I understand my own by checking their profiles and to determine if I am familiar with them or not and on what conditions.

  
  

  What do you think, is something like this possible with Flash or Java is it?
  

  
  

  
  

  You can do it with flash.

  You can do a little more and display the ip address of the user in the flash header.  and it is possible (with the script on the server side) to display the geographic location of the user based on their ip address.

• Is it possible to get the expression of quick filter above the list of messages in the vertical view?

  See the attached screenshot.

  I have a fairly big screen so I prefer to use the vertical display (with message pane appears to the right of the message list pane).

  I use quick filters / lot of research in the search for old messages. In doing so, my attention is focused on the message list pane, but to type an expression that I have to drag my focus on the far right of the screen, above the message pane. Logically, this area of the screen should be associated with the message, not the list of messages.

  If a simplistic solution can be available if I ask you if there is a way to customize the location of the elements in the quick filter bar, as I illustrated on the screenshot?

  But I think that the fundamental solution is to make the bar area of quick filter in the list pane message, instead of the current arrangement where it is part of the largest component that contains the message list pane and message pane.

  I welcome any advice on how to solve this problem, for me, or get it repaired for others to share.

  Ah, found the bugzilla database - was looking for link to support the site, but as I couldn't find one, I assumed that this channel has been used on the screen of the excessive defects in bugzilla.

  In any case, a quick search found me https://bugzilla.mozilla.org/show_bug.cgi?id=592248 - where someone complained the quick filter bar was too short in vertical view and this has been resolved by extending the bar on the top of the message pane.

  I guess that preference will depend on the size of the screen. I will take the question through bugzilla and can provide a patch to satisfy both sides, if I have time one of these days.

• Internal display flicker, ghosts, black flashing

  When you open the lid, the screen started "seers" black, I hear by then the screen will turn on and off, but when on, only show a black screen.  You can see what I mean here. When the internal display turns off, external displays for one second lag.

  Sometimes, the internal display will show what is actually on the screen, but it will flicker severely and superimpose a ghost of the screen on to halfway to the bottom of the screen, visible here.  External poster work very well, although they tear sometimes for a millisecond or two.  The computer works fine, I just can't see what I'm doing.  I am posting this from the computer using an external monitor.

  Steps than to attempt to resolve, I took:

  -J' test to see if it's a problem that the operating system sees or simply the screen by making an entry using Quicktime screen, and no problem in the recorded video.

  -Apple diagnostic test revealed no problems found (reference code: ADP000)

  -Reinstall OS X several times

  -Starts in Bootcamp, same problem with the internal display

  My thought is that it's a bad display cable, the screen inverter or any other Apple diagnostic Test does not cover.  Thanks for any help you can provide!

  Data sheet:

  El Capitan 10.11.6 (15G 31)

  MacBook Pro (retina, 15 inch, mid-2015)

  2.5 GHz Intel Core i7

  16 GB 1600 MHz DDR3

  512 GB SSD

  AMD Radeon R9 M370X

  Hello CAWeissen,

  Thank you for using communities of Apple Support.

  I understand your message that your MacBook Pro screen flashes only a black screen, but you can use external screens without problem. I know how much I use my Mac and using an external display is nice, but I do not always want to use a. You did a lot of great troubleshooting so far! An extra step that I would recommend would be to reset the NVRAM.

  This article includes the steps to reset the NVRAM:

  How to reset the NVRAM on your Mac.

  Reset the NVRAM

  1. Stop your Mac.
  2. Look for the following keys on the keyboard: command (⌘), Option, P, and R.
  3. Turn on your Mac.
  4. Press and hold the Command-Option-P-R keys, immediately after hearing the startup sound.
  5. Hold down these keys until the computer restarts and you hear the tone of starting for a second time.
  6. Release the keys.

  Also, just in case it turns out to be a hardware problem, we want to ensure that there is a current backup of your computer information.  For more information and creating a backup, check out this article here:

  Use Time Machine to back up or restore your Mac

  Best regards

• Satellite A500 - display driver no longer Flash black screen

  I brought my Satellite A500 2 weeks before and never since sometimes and sometimes worst the screen go black, back and I get an error message in the lower right part with the following: -.

  Display driver Nvidia Windows Kernel mode driver 187.98 Stopped answer and has successfully recovered.
  Now, I've updated the driver but the same problem is present and the same message error but instead of 187.98 I get 197.16

  Has anyone fixed this problem or is it a problem that Toshiba has need of fix and quick as I am not happy.

  In my case, I was able to resolve this problem, download a map graph to nvidia.com.