MMC cannot open the file C:\Windows\system32\devmgmt.msc.

Similar Questions

• Cannot open Device Manager or services.msc a message box pops up it says "MMc cannot open the file C:\Windows\system32\devmgmt.msc.

  Original title: I can't connect to my wireless network. My convenience store does not work and I can't open the network and sharing Center. I'm sure it's some type of virus. Help, please.
  It says "an unexpected error has occurred. The Troubleshooting Wizard can not continue. "When I try to run the troubleshooter.

  When I try to open Device Manager or services.msc a message box appears, it says "MMc cannot open the file C:\Windows\system32\devmgmt.msc.

  He said also my Defender pro subscription has expired, even if I've just recently added a one year subscription.

  Hello

  You did changes to the computer before the show?

  Method 1:
  Try these steps and check if it solves the problem:
  a. click Start, type cmd, right click and select run as administrator.

  b. at the command prompt, type regsvr32 msxml3.dll , and then press ENTER.

  Method 2:
  Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  Method 3:
  Run a Microsoft security scanner to make sure that the computer is free from virus infection:
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  WARNING:
  If you run the antivirus program that is infected by the virus scan will get deleted. Therefore, reinstall the program. Also if the files and folders are affected by the virus, while they might even get deleted

  See the steps in the link and check.

  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• MMC cannot open the file C:\windows\system32\WF.msc

  When I try to open the Action Center, I receive this message. MMC cannot open the file C:\windows\system32\WF.msc

  Hello

  Thanks for posting the question in the Microsoft Community forums.

  According to the description, you get a message of error 'mmc cannot open the file C:\windows\system32\WF.msc' when you try to open the center of the Action.

  We will perform the steps and check.

  Method 1:

  
  Try to access the Windows Firewall configuration through the console Microsoft Management console.
  
  a. click on start
  b. type MMC (right-click and choose Run as administrator)
  c. click on file (in the upper right corner)
  d. click Add/Remove snap-in software component
  e. Select Windows Firewall with advanced settings, in Add Remove snap-ins windows
  f. click Add (clicking ok does not make any changes)
  d. click OK and you should be able to use the settings of the Console 1 window.
  
  Method 2:
  
  If you are able to use the settings of the firewall through MMC, then scan your computer for corrupt system files.

  Perform a SFC scan on your computer. Consult the following link:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Hope this information helps. Please reply with the status so that we can help you.

• Windows 2k8R2 - receiving error when you connect (MMC cannot open the file: C:\Windows\system32\ServerManager.msc)

  Windows 2008 R2 - I just started getting this when I connect, and also when I try to manage the machine:

  MMC cannot open the file:

  C:\Windows\system32\ServerManager.msc

  It is perhaps because the file does not exist, is not an MMC console, or was created by a later version of MMC. This may also be because you don't have sufficient access to the file.

  It always worked before and work for other users simply not me on this particular area. It is a production company, and I need a quick resolution please. Thanks in advance.

  PM

  Hello

  Your Windows is better suited for the public of Windows Server on TechNet. Please post your question in the TechNet Windows server forum.

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer

• Could not open computer management. I m, like__MMC error message cannot open the file C:\WINDOWS\system32\compmgmt.msc

  I am the administrator total privileage still i'm getting the following error...

  MMC cannot open the file C:\WINDOWS\system32\compmgmt.msc

  It is perhaps because the file does not exist, is not an MMC console, or was created by a later version of MMC. Perhaps it is also because you don't have sufficient access to the file.

  I am the administrator total privileage still i'm getting the following error...

  MMC cannot open the file C:\WINDOWS\system32\compmgmt.msc

  It is perhaps because the file does not exist, is not an MMC console, or was created by a later version of MMC. Perhaps it is also because you don't have sufficient access to the file.

  Hey Sandy_Nepal

  read the answer below

  http://www.Winhelponline.com/articles/72/1/error-message-when-you-try-to-open-a-MMC-console.html

  http://www.allpostnews.co.UK/II27/compmgmt%20msc%20error%20messag.php

  Walter, the time zone traveller

• When running defrag, error "MMC cannot open the file c:\WINDOWS\system\dfrg.msc.

  When I run the defrag I get a message that says "MMC cannot open the file c:\WINDOWS\system\dfrg.msc. It is perhaps because the file does not exist, is not the MMC, or was created by a later version of MMC.

  Hello

  I tried the steps before I posted my question, but it did not work. However, I downloaded SP3 again and it seems to work now.
  Thank you

• MMC cannot open the file C:\Windows\System32\DFRG. MSC

  I TRIED TO DEFRAG MY COMPUTER, IT WON'T WORK.
  IT IS SAID TO BE, LOCKS, THE FILE DOES NOT EXIST, IS NOT AN MMC CONSOLE, OR WAS CREATED BY A LATER MMC VIRSION.

  I had the same problem.  "There was a simple solution for me in C:\Documents and Settings\"my PC name"\Application Data\Microsoft\MMC folder."  The defrag file was the only file showing. However, it lacked the extension ".msc".  When I added the extension, this fixed my problem.

• file c:\windows\system32\devmgmt.msc. is missing. How to restore

  file c:\windows\system32\devmgmt.msc.  This file is associated with the Device Manager, I can open it is more, it tells me that I have no right, I think that it is installed behind the installation of win is anyone know how to retrieve the file without having to reformat?

  Try here:

  When I tried to open Device Manager or the computer management window, I received an error message: "MMC cannot open the file C:\WINDOWS\system32\devmgmt.msc.

  John

• cannot open the file in windows Explorer

  Hello

  Double-click an InDesign file in Windows Explorer does not open the file

  He then shows the window of InDesign, but nothing opens

  Anyone know what this may be?

  2015 CC running on Windows 10 pro 64-bit

  Thank you
  David

  How to move the script to the user profile?

• Open the file 'C:\Windows\system32\ctl3d32.dll' could not be please check your disk is not full and that you have access to the destination directory. Access is denied.

  I am running Windows 7 Ultimate x 86 version and tries to install exPressit (by Memorex) is a very simple program and I just reinstalled Windows 7 just before so I have a new facility, 230gig of free space and 3 GB of ram so it could just be no proplem. Ive tried running as administrator and also replacing compatibility down to xp and Vista. I currently have 3 other computers using this program with Xp Proffesional, Windows Vista Ultimate, and Windows Vista Home Edition with no problems at all, so any ideas would be great cause if I don't find a solution quickly, that I have to downgrade to Vista.

  You should contact the support of exPressit on the compatibility of Windows 7.

  Messages rating helps other users

  Mark L. Ferguson MS - MVP

• When I try to install service pack 3 I get a message saying "Setup cannot copy the file c:\windows\system32\drivers\mrxdav.sys.

  He asks me to specify a location and also proposes to ignore this file that I don't know what to do

  Hi Lisa,

  You are able to correctly install the other updates?

  You can follow this link & check if the problem persists:

  How to troubleshoot an installation fails in Windows XP Service Pack 3?

  Hope the helps of information.

• XP, Windows Media Player tries to open each file and responds with, "windows media player cannot open the file.

  I can't even go to open, ' Change / Remove Programs "Control Panel. Same shortcuts on my desktop are not open without WMP trying to open the first file. Why is it in the middle of everything? How can I disable WMP or stop trying to open all files, media files that are not same? There version of WMP 9, but when I try to download a newer version, it won't work because WMP keeps popping up, saying: it cannot open the file.

  Hello

  Were there any changes (hardware or software) to the computer before the show?

  Perform the steps in the article mentioned below and check if the problem persists.

  Windows Media Player invalid file Error Message Format

  Hope this information helps.

• I get a message saying "Windows cannot open the file...". »

  I had a lot of problems with infections, so I was running many scanning programs.

  After getting my computer almost completely cleaned, I ran the Super Anti-Spyware program.  We find 3 infections, which I'd delete (I don't have no way of knowing that I removed).

  Since then, whenever I try to open a program, or even Windows Update, etc., I get a message saying:

  "Windows cannot open the file.  To open this file, Windows needs to know what kind of program has created.  Windows can go online to search automatically, or you can manually select from a list of programs.

  When I go on the web, I get a lot of options, which are almost free scans that then charge for fixing.  I am also very scared that I can also get another infection from these sites.

  I hope someone can help me solve this problem.

  StanEp

  Yes, each method is a set of measures to try and then go ahead and try each one separate.

  2 method will reset the executable (.exe) extension that will allow you to open programs. It is not clear what exactly you are trying to open so that it can have no effect.

  Keep in mind that the damage caused by malware can be irreversible, in the case of relocations are necessary.

• WINDOWS cannot OPEN THE FILE D:\Sources\Install.wim REQUIERED. Make sure that all required files for installation aare available and restart the installation. Error code: 0x8007000D,.

  IM TRYING to re - INSTALL WINDOWS VISTA ON MY T-6321 to the front door, BUT WHEN I INSERT THE DISC, AND INSTALL, a MESSAGE APPEARS SAYING: WINDOWS cannot OPEN THE FILE D:\Sources\Install.wim REQUIERED. Make sure that all required files for installation aare available and restart the installation. Error code: 0x8007000D, SHOULD ALL BE ON THE DISCALREADY?

  Hi JRCLNSIN100,

   

  Welcome to Microsoft Answers Forums.

  We would like to get some more information from you to help solve your problem. You better, please answer the following questions.

  ·         What is the disk you use to reinstall?

  ·         Is this a recovery or reinstalling the disc you are using?

  ·         When exactly do you get this error message?

  ·         What is the edition of Windows Vista, you try to install?

  ·         How old is the drive that you are using?

  ·         How are you starting the installation process?

  After researching the error 0x8007000D code is essentially due to file corruption and a problem with the drive itself.

  First check if you have scratches or dust on the disc and clean the surface and try again.

  To check if the disk is wrong, you will need to copy the contents of the DVD to the hard drive and try to install using that.

  To perform a flat installation of Windows Vista, follow these steps.

  Note The hard disk must have at least 3 GB of free space on the disk for the Windows Vista installation files. The hard disk must have at least 15 GB of additional disk space to install Windows Vista. For more information about system requirements for Windows Vista, see the Microsoft Web site at the following address:

  http://www.Microsoft.com/Windows/products/windowsvista/editions/SystemRequirements.mspx

  1. Insert the Windows Vista installation disc.
  2. Start Windows Explorer.
  3. In Windows Explorer, click to select the drive for the Windows Vista installation disc.
  4. On the Edit menu, click select all.
  5. On the Edit menu, click copy.
  6. Click to select the hard disk you want to contain the flat installation files.
  7. On the file menu, point to new, click the folder, type Windows Vista Setupand then press ENTER.
  8. Double-click the Windows Vista Setup program, and then click Paste on the Edit menu.
  9. Double-click Setup.exe, and then follow the instructions that appear.

  See the link below for more information on flat installation.

  How to perform a flat installation of Windows Vista

  http://support.Microsoft.com/kb/928902

  This problem can also occur if the firmware of the DVD drive is defective or obsolete.

  If the step above does not resolve the question suggests that you install the latest drivers for the DVD player on the computer.

  For more information please visit the link below.

  Error message when you try to install Windows Vista by using the DVD drive on the computer: "Windows cannot install required files".

  http://support.Microsoft.com/kb/930984

  Hope this information is useful.

  Let me know if it worked.

  All the best!

  Thanks and greetings

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• "windows cannot open the file must know what program - program list selection" when tried to open the file

  After a problem with my sony ebook reader, I was told by the library to remove the program Sony and library of books on the computer and the drive, and then reinstall the program.  I would then be able to download the books again.  But now I have a message saying that windows cannot open the file must know what program - select the program from the list. When I click on the program sony player list is not there.  What I am doing wrong?  You can give me some advice.

   
  Original title: Pauline1949

  Hello

  1. have you downloaded the right file to library?

  2. What is the file format of the file that you downloaded?

  3. What are the recommendations of programs that provided by Windows?

  4. have you installed the player from the computer program?

  5 is this problem confined to a particular file that downloaded?

   
  The file that you downloaded requires an appropriate program to open it in Windows. That's why I suggest to check again if you have installed the reader program and also check if you have downloaded the appropriate Center books.
   
  Reference:
  
   
  Reader store
  http://eBookStore.Sony.com/
  Player for PC
  http://eBookStore.Sony.com/download/
   
  If you have installed the right program and download the correct file in the program. I suggest you to change the player to default programs in Windows.
  Reference:
  Change the programs that Windows uses by default
  http://Windows.Microsoft.com/en-us/Windows7/change-which-programs-Windows-uses-by-default
   
  I hope this helps.