MMS does not not on note k3
I can't send or receive texts picture on my note of k3. Everything else works fine. Is there a setting in the phone that I need to be turned on? I need this feature to my work. Help, please. Thank you.
Problem solved. I downloaded an app called textra and now my mms Messaging works perfectly. The e-mail that comes with the phone application does not work for mms.
Tags: Lenovo Phones
Similar Questions
-
MMS does not work since 1.0.3 update
MMS does not send to other phones or to an e-mail address. No errors of any kind, is just as he sent it, but I can never receive anything...
I rebooted my phone and it started to work again... so be it.
-
MMS does not work after iOS 10.1
IMessage works very well with apple users. But can't the apple users not text.
Jake monroe says:
IMessage works very well with apple users. But can't the apple users not text.
If you cannot send or receive messages on your iPhone, iPad or iPod touch - Apple Support
Make sure that the MMS is enabled in the settings of the message.
IF the link provided does not help then you should contact your mobile phone provider as MMS is a characteristic of carrier.
-
I have the Verizon BlackBerry Storm 9530. When I try to extract the SMS and MMS messages, I get the following message: Eception exception: java.lang.NullPointerException. After hours on the phone with Verizon, they blame the people of BlackBerry. So now I have no possibility to send SMS; the send or receive. Other than, I'm very happy with the update. Can someone help me? Thanks, Bouldaire
Of course, this does not either. I then did a restore of my office and 'bingo' everything works fine. I'm still distraught about the java error message; but luckily he is gone and everything works fine. Thanks for your persistence and time with me. Best regards, Patrick
-
Consumer Cellular: Data and MMS does not
I have a brand new Moto X, and when I called consumer cell to activate it, says tech support person she had never been able to get a motorcycle X to work with data from the se network. Is not encouraging, but I have trouble believing that there are No bike X users out there using cellular consumption. I found a post on another forum and I tried settings there, without success.
Please, can someone tell me where I'm wrong? I have the box checked next to "enabled data: enable access to the data on Mobile network". Are there other settings that must be set at a certain way?
In addition, whenever I change the settings of the AFN ConsumerCellular under the names of access points, I hit "Save". I have then turn off my phone and power immediately to the top. What is the correct process?
Someone at - it APN settings that work for a Moto X on cell use? For any help or suggestion would be greatly appreciated!
Here are the settings I've already tried:
Name: ConsumerCellular
APN: att.mvno
Proxy: 66.209.11.32
Port: 80
User name:
Password:
Server:
MMSC: http://mmsc.cingular.com
MMS proxy: 66.209.11.32
MMS port: 80
MCC: 310
MNC: 410
Authentication type: PAP
APN type: default
AFN Protocol: IPv4
AFN roaming Protocol: IPv4
Carrier: not specified
Type of MVNO: None
Name: ConsumerCellular
APN: att.mvno
Proxy: 66.209.11.32
Port: 80
User name:
Password:
Server: http://mmsc.cingular.com
MMSC: http://mmsc.cingular.com
MMS proxy: 66.209.11.32
MMS port: 80
MCC: 310
MNC: 410
Authentication type: PAP
APN type: by default, mms, supl, agps, fota
AFN Protocol: IPv4
AFN roaming Protocol: IPv4
Carrier: not specified
Type of MVNO: None
Name: ConsumerCellular
APN: att.mvno
Proxy: proxy.mvno.ccmobileweb.com
Port: 80
Username: undefined
Password: not set
Server: http://mmsc.cingular.com
MMSC: http://mmsc.cingular.com
MMS proxy: 66.209.11.32
MMS port: undefined
MCC: 310
MNC: 410
Authentication type: PAP or CHAP
APN type: not set
AFN Protocol: IPv4
AFN roaming Protocol: IPv4
Carrier: not specified
MVNO type: no
Finally, these are the settings that the CC tech support rep had me try (after telling me that they had not worked for any user of Moto X, sigh):
Name: ConsumerCellular
APN: att.mvno
Proxy: Not set
Port: Not defined
Username: undefined
Password: not set
Server: Not set
MMSC: http://mmsc.cingular.com
MMS proxy: proxy.mvno.ccmobileweb.com
MMS port: 80
MCC: 310
MNC: 410
Authentication type: PAP
Type APN: internet, mms
AFN Protocol: IPv4
AFN roaming Protocol: IPv4
Carrier: not specified
MVNO type: no
-
MMS does not not on iOS 10!
I can only send MMS via iMessage. When I click on the photo icon, theres no feedback. If I copy and paste a picture in a message, it looks like I need to activate my MMS. However in the settings > messages, there is no option to turn a MMS SMS only. Am I missing something?
MMS is a feature cell phone carrier. Your carrier allows to MMS on your plan?
I have an AT & T plan in the United States, and I still have settings > Messages > MMS messaging with iOS 10 as an option.
-
MMS 5650 sound control does not
Hello
The sound control to adjust the volume in my Center speaker does not work, it turn on and off the sound system, but the noise level is always the same, it has no effect on the sound level.
I don't really know when the problem started, maybe when I installed Windows Vista, although I can't confirm that.
I deleted and reinstalled the latest version of my card Creative sound, the SB Audigy 2 ZS (WDM).
Any idea, comment or the link to the possible solution will be appreciated.
Thank you.
The only thing to check in the PC is the configuration of the speakers. Go to Control Panel - hardware and sound - its Panel. Left click on your speaker icon to highlight, and then click Configure and select the 5.1 speaker system. You can also test the speakers on this Panel.
If it is configured correctly, the problem is internal in the speaker system. The only thing you can do is "resettlement" of all connections of speakers (unplug then plug into each connector by ensuring they are deep-set). If it is not in warranty there is no repair for the speaker systems. Even if you could find a place to fix the price of a new system of speaker would be about the same as the price of the minimum work.
-
8.1 - the windows up to date. Updated video driver. Connect Flash to date.
I tried to disable the protected mode, no effect.
Everything works great until I updated to FF.
Very annoying bug. Help please?Are you sure protected mode is disabled? Firefox has a setting hidden for this moment, where you manually edit a file mms.cfg:
(A) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.
(B) in the search above the list box, type or paste the flash and make a pause so that the list is filtered
(C) double-click the preference dom.ipc.plugins.flash.disable - protected mode to change its value from false to true.
It cannot take effect until all the Flash was discharged for a few minutes, or you close Firefox.
Firefox can read WEBM and OGG video natively in the HTML5 player without outside help, but it uses Windows Media Foundation to play the MP4 video. There are some settings in Firefox to disable it; users who download MP3s sometimes easily changed these settings. Here's how you can check your:
(1) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.
(2) in the search above the list box, type or paste the media and make a pause so that the list is filtered
(3) {for Windows newer than XP} if the preference media.windows - media - foundation.enabled is in bold and user set to 'false', double-click to go to true
(4) {for Windows XP} If media.directshow.enabled preference is in bold and user set to 'false', double-click to go to true
If you have changed these settings, does make a difference in this YouTube Player used you? I'm not sure if the change takes effect immediately or after leaving Firefox and start it again.
Users in Europe may need the Windows Media Feature Pack for Windows 8.1, but if your Windows is shipped with Windows Media Player, and then which probably does not apply to you. See:
-
Firefox worm 25.
It downloads the pages slowly. I started it without plugins. I've updated all the plugins.
Sometimes Firefox Watch window 'Script on this page may be busy... ". «The status line showes "transfer data of...» »I would like to thank Christophe.
I did everything you mentioned, but it does not help.
I found the solution. The steps are:- 1 change of security for adobe flash in the C:\Windows\System32\Macromed\Flash\mms.cfg file add the line ProtectedMode = 0
- 2. set in Firefox Subject: config change dom.ipc.plugins.enabled to false and dom.ipc.plugins.java.enabled to true
- 3 disable hardware acceleration (advanced - general - settings)
I guess only the first step and half of second if enough.
We thank Assistant. My request can be closed. -
Application does not work without wifi connection
Hello I have a problem with the http connection
my code is
public class HttpConnectionFactory { /** * Specifies that only wifi should be used */ public static final int TRANSPORT_WIFI = 1; /** * Specifies that only BES (also known as MDS or corporate servers) */ public static final int TRANSPORT_BES = 2; /** * Specifies that only BIS should be used (Basically RIM hosted BES) */ public static final int TRANSPORT_BIS = 4; /** * Specifies that TCP should be used (carrier transport) */ public static final int TRANSPORT_DIRECT_TCP = 8; /** * Specifies that WAP2 should be used (carrier transport) */ public static final int TRANSPORT_WAP2 = 16; /** * Equivalent to: TRANSPORT_WIFI | TRANSPORT_BES | TRANSPORT_BIS | * TRANSPORT_DIRECT_TCP | TRANSPORT_WAP2 */ public static final int TRANSPORTS_ANY = TRANSPORT_WIFI | TRANSPORT_BES | TRANSPORT_BIS | TRANSPORT_DIRECT_TCP | TRANSPORT_WAP2; /** * Equivalent to: TRANSPORT_WIFI | TRANSPORT_BES | TRANSPORT_BIS */ public static final int TRANSPORTS_AVOID_CARRIER = TRANSPORT_WIFI | TRANSPORT_BES | TRANSPORT_BIS; /** * Equivalent to: TRANSPORT_DIRECT_TCP | TRANSPORT_WAP2 */ public static final int TRANSPORTS_CARRIER_ONLY = TRANSPORT_DIRECT_TCP | TRANSPORT_WAP2; /** * The default order in which selected transports will be attempted * */ public static final int DEFAULT_TRANSPORT_ORDER[] = { // TRANSPORT_DIRECT_TCP // ,TRANSPORT_WAP2 TRANSPORT_WIFI, // TRANSPORT_BES, TRANSPORT_BIS, // TRANSPORT_WAP2, TRANSPORT_DIRECT_TCP }; private static final int TRANSPORT_COUNT = DEFAULT_TRANSPORT_ORDER.length; private static ServiceRecord srMDS[], srBIS[], srWAP2[], srWiFi[]; private static boolean serviceRecordsLoaded = false; private int curIndex = 0; private int curSubIndex = 0; // private String url; private final String extraParameters; private final int transports[]; private int lastTransport = 0; /** * Equivalent to *
HttpConnectionFactory( url, null, HttpConnectionFactory.DEFAULT_TRANSPORT_ORDER )
* * @see #HttpConnectionFactory(String, String, int[]) * @param url * See {@link #HttpConnectionFactory(String, String, int[])} */ public HttpConnectionFactory() { this(null, 0); } /** * Equivalent to *HttpConnectionFactory( url, null, allowedTransports )
* * @see #HttpConnectionFactory(String, String, int) * @param url * See {@link #HttpConnectionFactory(String, String, int)} * @param allowedTransports * See {@link #HttpConnectionFactory(String, String, int)} */ public HttpConnectionFactory(int allowedTransports) { this(null, allowedTransports); } public HttpConnectionFactory(int transportPriority[]) { this(null, transportPriority); } public HttpConnectionFactory(String extraParameters, int allowedTransports) { this(extraParameters, transportMaskToArray(allowedTransports)); } public HttpConnectionFactory(String extraParameters, int transportPriority[]) { if (!serviceRecordsLoaded) { loadServiceBooks(false); } // // if (url == null) { // throw new IllegalArgumentException("Null URL passed in"); // } // if (!url.toLowerCase().startsWith("http")) { // throw new IllegalArgumentException("URL not http or https"); // } // // this.url = url; this.extraParameters = extraParameters; transports = transportPriority; } public Connection getNextConnection(String url) throws NoMoreTransportsException { Connection con = null; int countsWap = 0; int countsBis = 0; int countsBes = 0; int curTransport = 0; while (con == null && curIndex < transports.length) { System.out.println("con=" + con + " curid=" + curIndex); curTransport = transports[curIndex]; switch (curTransport) { case TRANSPORT_WIFI: curIndex++; curSubIndex = 0; try { con = getWifiConnection(url); } catch (Exception e) { } break; case TRANSPORT_BES: curIndex++; curSubIndex = 0; try { if (countsBes > 3) { throw new NoMoreTransportsException(); } con = getBesConnection(url); countsBes++; } catch (Exception e) { } break; case TRANSPORT_BIS: while (con == null) { try { if (countsBis > 3) { throw new NoMoreTransportsException(); } con = getBisConnection(url, curSubIndex); countsBis++; } catch (NoMoreTransportsException e) { curIndex++; curSubIndex = 0; break; } catch (Exception e) { } } break; case TRANSPORT_DIRECT_TCP: curIndex++; try { con = getTcpConnection(url); } catch (Exception e) { } break; case TRANSPORT_WAP2: while (con == null) { // try { // if (countsWap > 3) { // throw new NoMoreTransportsException(); // } // // con = getWap2Connection(url, curSubIndex); // countsWap++; // } catch (NoMoreTransportsException e) { // curIndex++; // curSubIndex = 0; // break; // } catch (Exception e) { // } } break; } } if (con == null) { throw new NoMoreTransportsException(); } lastTransport = curTransport; return con; } public Connection getCurrentConnection(String url) throws NoMoreTransportsException { Connection con = null; switch (lastTransport) { case TRANSPORT_WIFI: try { con = getWifiConnection(url); } catch (Exception e) { } break; case TRANSPORT_BES: try { con = getBesConnection(url); } catch (Exception e) { } break; case TRANSPORT_BIS: while (con == null) { try { con = getBisConnection(url, curSubIndex); } catch (NoMoreTransportsException e) { break; } catch (Exception e) { } } break; case TRANSPORT_DIRECT_TCP: try { con = getTcpConnection(url); } catch (Exception e) { } break; case TRANSPORT_WAP2: while (con == null) { try { con = getWap2Connection(url, curSubIndex); System.out.println("" + con); } catch (NoMoreTransportsException e) { break; } catch (Exception e) { } } break; } return con; } /** * Returns the transport used in the connection last returned via * {@link #getNextConnection()} * * @return the transport used in the connection last returned via * {@link #getNextConnection()} or 0 if none */ public int getLastTransport() { return lastTransport; } /** * Generates a connection using the BIS transport if available * * @param index * The index of the service book to use * @return An {@link HttpConnection} if this transport is available, * otherwise null * @throws NoMoreTransportsException * @throws IOException * throws exceptions generated by {@link getConnection( String * transportExtras1, String transportExtras2 )} */ private Connection getBisConnection(String url, int index) throws NoMoreTransportsException, IOException { System.out.println("BIS Try"); if (index >= srBIS.length) { throw new NoMoreTransportsException("Out of BIS transports"); } ServiceRecord sr = srBIS[index]; return getConnection(url, ";deviceside=false;connectionUID=", sr .getUid()); } /** * Generates a connection using the BES transport if available * * @return An {@link HttpConnection} if this transport is available, * otherwise null * @throws IOException * throws exceptions generated by {@link getConnection( String * transportExtras1, String transportExtras2 )} */ private Connection getBesConnection(String url) throws IOException { System.out.println("BES try"); if (CoverageInfo.isCoverageSufficient(CoverageInfo.COVERAGE_MDS)) { return getConnection(url, ";deviceside=false", null); } return null; } /** * Generates a connection using the WIFI transport if available * * @return An {@link HttpConnection} if this transport is available, * otherwise null * @throws IOException * throws exceptions generated by {@link getConnection( String * transportExtras1, String transportExtras2 )} */ private Connection getWifiConnection(String url) throws IOException { System.out.println("wifi try"); // if (RadioInfo.areWAFsSupported(RadioInfo.WAF_WLAN) // && (RadioInfo.getActiveWAFs() & RadioInfo.WAF_WLAN) != 0 // && CoverageInfo.isCoverageSufficient(1 /* // * CoverageInfo.COVERAGE_DIRECT // */, // RadioInfo.WAF_WLAN, false)) { // // return getConnection(";deviceside=true;interface=wifi", null); // // return getConnection(";deviceside=true;interface=wifi", null); // // } // !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! if (WLANInfo.getWLANState() == WLANInfo.WLAN_STATE_CONNECTED && srWiFi.length > 0) { return getConnection(url, ";interface=wifi", null); } return null; } /** * Generates a connection using the WAP2 transport if available * * @param index * The index of the service book to use * @return An {@link HttpConnection} if this transport is available, * otherwise null * @throws NoMoreTransportsException * if index is outside the range of available service books * @throws IOException * throws exceptions generated by {@link getConnection( String * transportExtras1, String transportExtras2 )} */ private Connection getWap2Connection(String url, int index) throws NoMoreTransportsException, IOException { System.out.println("WAP2 try"); if (index >= srWAP2.length) { throw new NoMoreTransportsException("Out of WAP2 transports"); } if (CoverageInfo .isCoverageSufficient(1 /* CoverageInfo.COVERAGE_DIRECT */)) { ServiceRecord sr = srWAP2[index]; return getConnection(url, ";ConnectionUID=", sr.getUid()); } return null; } /** * Generates a connection using the TCP transport if available * * @return An {@link HttpConnection} if this transport is available, * otherwise null * @throws IOException * throws exceptions generated by {@link getConnection( String * transportExtras1, String transportExtras2 )} */ private Connection getTcpConnection(String url) throws IOException { System.out.println("direct try"); if (CoverageInfo .isCoverageSufficient(1 /* CoverageInfo.COVERAGE_DIRECT */)) { String extraParameter = null; if (!DeviceInfo.isSimulator()) { url = url + ";deviceside=true"; } return getConnection(url, null, null); // ";deviceside=true", null); } return null; } /** * Utility method for actually getting a connection using whatever transport * arguments the transport may need * * @param transportExtras1 * If not null will be concatenated onto the end of the * {@link url} * @param transportExtras2 * If not null will be concatenated onto the end of {@link url} * after transportExtras1 * @return An {@link HttpConnection} built using the url and transport * settings provided * @throws IOException * any exceptions thrown by {@link Connector.open( String name * )} */ private Connection getConnection(String url, String transportExtras1, String transportExtras2) throws IOException { StringBuffer fullUrl = new StringBuffer(); fullUrl.append(url); if (transportExtras1 != null) { fullUrl.append(transportExtras1); } if (transportExtras2 != null) { fullUrl.append(transportExtras2); } if (extraParameters != null) { fullUrl.append(extraParameters); } // fullUrl.append(";ConnectionTimeout=5000"); System.out.println(fullUrl.toString()); return Connector.open(fullUrl.toString(), Connector.READ_WRITE, true); } /** * Public method used to reload service books for whatever reason (though I * can't think of any) */ public static void reloadServiceBooks() { loadServiceBooks(true); } /** * Loads all pertinent service books into local variables for later use. * Called upon first instantiation of the class and upload {@link * reloadServiceBooks()} * * @param reload * Whether to force a reload even if they've already been loaded. */ private static synchronized void loadServiceBooks(boolean reload) { if (serviceRecordsLoaded && !reload) { return; } ServiceBook sb = ServiceBook.getSB(); ServiceRecord[] records = sb.getRecords(); Vector mdsVec = new Vector(); Vector bisVec = new Vector(); Vector wap2Vec = new Vector(); Vector wifiVec = new Vector(); if (!serviceRecordsLoaded) { for (int i = 0; i < records.length; i++) { ServiceRecord myRecord = records[i]; String cid, uid; // sometimes service record is disabled but works if (myRecord.isValid() /* && !myRecord.isDisabled() */) { cid = myRecord.getCid().toLowerCase(); uid = myRecord.getUid().toLowerCase(); // BIS if (cid.indexOf("ippp") != -1 && uid.indexOf("gpmds") != -1) { bisVec.addElement(myRecord); } // WAP1.0: Not implemented. // BES if (cid.indexOf("ippp") != -1 && uid.indexOf("gpmds") == -1) { mdsVec.addElement(myRecord); } // WiFi if (cid.indexOf("wptcp") != -1 && uid.indexOf("wifi") != -1) { wifiVec.addElement(myRecord); } // Wap2 if (cid.indexOf("wptcp") != -1 && uid.indexOf("wap2") != -1) { wap2Vec.addElement(myRecord); } } } srMDS = new ServiceRecord[mdsVec.size()]; mdsVec.copyInto(srMDS); mdsVec.removeAllElements(); mdsVec = null; srBIS = new ServiceRecord[bisVec.size()]; bisVec.copyInto(srBIS); bisVec.removeAllElements(); bisVec = null; srWAP2 = new ServiceRecord[wap2Vec.size()]; wap2Vec.copyInto(srWAP2); wap2Vec.removeAllElements(); wap2Vec = null; srWiFi = new ServiceRecord[wifiVec.size()]; wifiVec.copyInto(srWiFi); wifiVec.removeAllElements(); wifiVec = null; serviceRecordsLoaded = true; } } /** * Utility methd for converting a mask of transports into an array of * transports in default order * * @param mask * ORed collection of masks, example: *TRANSPORT_WIFI | TRANSPORT_BES
* @return an array of the transports specified in mask in default order, * example: { TRANSPORT_WIFI, TRANSPORT_BES } */ private static int[] transportMaskToArray(int mask) { if (mask == 0) { mask = TRANSPORTS_ANY; } int numTransports = 0; for (int i = 0; i < TRANSPORT_COUNT; i++) { if ((DEFAULT_TRANSPORT_ORDER[i] & mask) != 0) { numTransports++; } } int transports[] = new int[numTransports]; int index = 0; for (int i = 0; i < TRANSPORT_COUNT; i++) { if ((DEFAULT_TRANSPORT_ORDER[i] & mask) != 0) { transports[index++] = DEFAULT_TRANSPORT_ORDER[i]; } } return transports; } }HIII, I use this class to call http to the server, but each time that gives the error No more TransportsException
application only works on wifi
I try both GET and POST nothing workeddevice: = 8520 os 5.0
BIS service provider:-vodaphone plan 15/day
in that gtalk and facebook works finealso I test this app in Arabic countries it also does not work
------------------------------after i am test using ---------------------------------------------
networkDignostic link:- http://supportforums.blackberry.com/t5/Java-Development/What-Is-Network-API-alternative-for-legacy-O...use networkDignostic to test the available transport connection
Here is the result
The Radio Signal level:-81 dBm
WIFI Signal level: No coverage
Network name: Vodafone in
Network type: GPRS
Network services: data + EDGE + voice
PIN: 27F03947
Battery: 81%
= End of network Info =.
Transport: by default (HTTP GET)
Result: failure
Answer:-1
Length:-1
URL: http://www.google.ca:80 /
Journal:Login to http://www.google.ca:80 /
Opening connection...
Error: net.rim.device.internal.io.CriticalIOException: failed criticism tunnel
= END OF LOG =.Transport: by default (Socket GET)
Result: failure
Answer:-1
Length:-1
URL: socket: / /www.google.ca:80
Journal:Connecting to a socket: / /www.google.ca:80
Opening connection...
Error: java.io.IOException: invalid url parameter.
= END OF LOG =.Transport: by default (HTTP POST)
Result: failure
Answer:-1
Length:-1
URL: http://www.google.ca:80 /
Journal:Login to http://www.google.ca:80 /
Opening connection...
Error: net.rim.device.internal.io.CriticalIOException: failed criticism tunnel
= END OF LOG =.Transport: By default (POST plug)
Result: failure
Answer:-1
Length:-1
URL: socket: / /www.google.ca:80
Journal:Connecting to a socket: / /www.google.ca:80
Opening connection...
Error: java.io.IOException: invalid url parameter.
= END OF LOG =.Transport: TCP cellular (HTTP GET)
Result: failure
Answer:-1
Length:-1
URL: http://www.google.ca:80 /; deviceside = true
Journal:Login to http://www.google.ca:80 /; deviceside = true
Opening connection...
Error: net.rim.device.internal.io.CriticalIOException: failed criticism tunnel
= END OF LOG =.Transport: TCP cell (Socket GET)
Result: failure
Answer:-1
Length:-1
URL: socket: / /www.google.ca:80; deviceside = true
Journal:Connecting to a socket: / /www.google.ca:80; deviceside = true
Opening connection...
Error: net.rim.device.internal.io.CriticalIOException: failed criticism tunnel
= END OF LOG =.Transport: TCP cellular (HTTP POST)
Result: failure
Answer:-1
Length:-1
URL: http://www.google.ca:80 /; deviceside = true
Journal:Login to http://www.google.ca:80 /; deviceside = true
Opening connection...
Error: net.rim.device.internal.io.CriticalIOException: failed criticism tunnel
= END OF LOG =.Transport: TCP cell (POST plug)
Result: failure
Answer:-1
Length:-1
URL: socket: / /www.google.ca:80; deviceside = true
Journal:Connecting to a socket: / /www.google.ca:80; deviceside = true
Opening connection...
Error: net.rim.device.internal.io.CriticalIOException: failed criticism tunnel
= END OF LOG =.Transport: MDS (HTTP GET)
Result: failure
Answer:-1
Length:-1
URL: Not available url
Journal:Ignored test: no MDS do not service records found.
Ignored test: coverage of SDM is not availableTransport: MDS (Socket GET)
Result: failure
Answer:-1
Length:-1
URL: Not available url
Journal:Ignored test: no MDS do not service records found.
Ignored test: coverage of SDM is not availableTransport: MDS (HTTP POST)
Result: failure
Answer:-1
Length:-1
URL: Not available url
Journal:Ignored test: no MDS do not service records found.
Ignored test: coverage of SDM is not availableTransport: MDS (POST plug)
Result: failure
Answer:-1
Length:-1
URL: Not available url
Journal:Ignored test: no MDS do not service records found.
Ignored test: coverage of SDM is not availableTransport: BIS - B (HTTP GET)
Result: pass
Answer: 200
Length:-1
URL: http://www.google.ca:80 /; deviceside = false; ConnectionType = m * s - pub *
Journal:Login to http://www.google.ca:80 /; * only given to the RIM ISV partners.
Opening connection...
Open connection
Definition of the properties of application...
Host: www.google.ca
User-Agent: Mozilla/4.0
Connection: close
Get the response code...
Response code: 200
Got the content length:-1 bytes
Downloading content...
Download time: 3,034 seconds
Downloaded: 37943 bytes
Closes the connection...
Connection closed
= END OF LOG =.Transport: BIS - B (Socket GET)
Result: pass
Answer: 200
Length: 38696
URL: socket: / /www.google.ca:80; deviceside = false; ConnectionType = m * s - could * c
Journal:Connecting to a socket: / /www.google.ca:80; * only given to the RIM ISV partners.
Opening connection...
Open connection
Send GET request:
"GET / HTTP/1.1".
Host: www.google.ca
User-Agent: Mozilla/4.0
Connection: close"
Downloading content...
Download time: 2,397 seconds
Downloaded: 38696 bytes
Closing connection
Connection closed
= END OF LOG =.Transport: BIS - B (HTTP POST)
Result: failure
Answer: 405
Length: 959
URL: http://www.google.ca:80 /; deviceside = false; ConnectionType = m * s - p * ic
Journal:Login to http://www.google.ca:80 /; * only given to the RIM ISV partners.
Opening connection...
Open connection
Request method POST value
Definition of the properties of application...
Host: www.google.ca
Content-Length: 1500
Content-Type: application/octet-stream
User-Agent: Mozilla/4.0
Connection: close
Display of 1 500 bytes...
Posted 1 500 bytes
Get the response code...
Response code: 405
Got the content length: 959 bytes
Downloading content...
Download time: 1,044 seconds
Downloaded: 959 bytes
Closing connection
Connection closed
= END OF LOG =.Transport: BIS - B (POST plug)
Result: failure
Answer: 405
Length: 1204
URL: socket: / /www.google.ca:80; deviceside = false; ConnectionType = m * Pei * li *
Journal:Connecting to a socket: / /www.google.ca:80; * only given to the RIM ISV partners.
Opening connection...
Open connection
Definition of the properties of application...
Envoy POST request:
"POST / HTTP/1.1".
Host: www.google.ca
Content-Length: 1500
Content-Type: application/octet-stream
User-Agent: Mozilla/4.0
Connection: close"
Display of 1 500 bytes...
Posted 1 500 bytes
Downloading content...
Download time: 2,041 seconds
Downloaded: 1204 bytes
Closing connection
Connection closed
= END OF LOG =.Transport: WAP (HTTP GET)
Result: failure
Answer:-1
Length:-1
URL: Not available url
Journal:Ignored test: no WAP do not service records found.
Ignored test: coverage WAP is not available
Ignored test: Please provide IP and APN WAPTransport: WAP (Socket GET)
Result: failure
Answer:-1
Length:-1
URL: Not available url
Journal:Ignored test: no WAP do not service records found.
Ignored test: coverage WAP is not available
Ignored test: Please provide IP and APN WAPTransport: WAP (HTTP POST)
Result: failure
Answer:-1
Length:-1
URL: Not available url
Journal:Ignored test: no WAP do not service records found.
Ignored test: coverage WAP is not available
Ignored test: Please provide IP and APN WAPTransport: WAP (POST plug)
Result: failure
Answer:-1
Length:-1
URL: Not available url
Journal:Ignored test: no WAP do not service records found.
Ignored test: coverage WAP is not available
Ignored test: Please provide IP and APN WAPTransport: WAP2 (HTTP GET)
Result: failure
Answer:-1
Length:-1
URL: http://www.google.ca:80 /; deviceside = true; ConnectionUID = WAP2 trans
Journal:Connection http://www.google.ca:80 /; deviceside = true; ConnectionUID = WAP2 trans
Opening connection...
Error: net.rim.device.internal.io.CriticalIOException: failed criticism tunnel
= END OF LOG =.Transport: WAP2 (socket GET)
Result: failure
Answer:-1
Length:-1
URL: socket: / /www.google.ca:80; deviceside = true; ConnectionUID = WAP2 trans
Journal:Connecting to a socket: / /www.google.ca:80; deviceside = true; ConnectionUID = WAP2 trans
Opening connection...
Error: net.rim.device.internal.io.CriticalIOException: failed criticism tunnel
= END OF LOG =.Transport: WAP2 (HTTP POST)
Result: failure
Answer:-1
Length:-1
URL: http://www.google.ca:80 /; deviceside = true; ConnectionUID = WAP2 trans
Journal:Connection http://www.google.ca:80 /; deviceside = true; ConnectionUID = WAP2 trans
Opening connection...
Error: net.rim.device.internal.io.CriticalIOException: failed criticism tunnel
= END OF LOG =.Transport: WAP2 (POST plug)
Result: failure
Answer:-1
Length:-1
URL: socket: / /www.google.ca:80; deviceside = true; ConnectionUID = WAP2 trans
Journal:Connecting to a socket: / /www.google.ca:80; deviceside = true; ConnectionUID = WAP2 trans
Opening connection...
Error: net.rim.device.internal.io.CriticalIOException: failed criticism tunnel
= END OF LOG =.Transport: WiFi (HTTP GET)
Result: failure
Answer:-1
Length:-1
URL: Not available url
Journal:Ignored test: WiFi coverage is not available
Transport: WiFi (Socket GET)
Result: failure
Answer:-1
Length:-1
URL: Not available url
Journal:Ignored test: WiFi coverage is not available
Transport: WiFi (HTTP POST)
Result: failure
Answer:-1
Length:-1
URL: Not available url
Journal:Ignored test: WiFi coverage is not available
Transport: WiFi (POST plug)
Result: failure
Answer:-1
Length:-1
URL: Not available url
Journal:Ignored test: WiFi coverage is not available
Thank you peter and jovinz
I think I have problem in httpconnectionfactory with several url parameter, as peter says
so now I have usr post url as the code below
public static void CheckConnection() { HttpConnection hc=null; try { //Wifi Connection if ( (WLANInfo.getWLANState() == WLANInfo.WLAN_STATE_CONNECTED) && RadioInfo.areWAFsSupported(RadioInfo.WAF_WLAN)) { ConstantData.postURL=";interface=wifi"; return; } //for BES or MDS Connection if(CoverageInfo.isCoverageSufficient(CoverageInfo.COVERAGE_MDS)) { boolean connectionFlag=false; String post_url; //for BES Connections post_url=""; try { hc = (HttpConnection) Connector.open("http://www.rim.com"+post_url,Connector.READ_WRITE); if(hc.getResponseCode()==HttpConnection.HTTP_OK) { connectionFlag=true; ConstantData.postURL=post_url; return; } if(hc!=null) hc.close(); } catch (Exception e) { System.out.println(e.toString()); connectionFlag=false; } //for MDS Connection if(!connectionFlag) { try { post_url = ";deviceside=false"; hc = (HttpConnection) Connector.open("http://www.rim.com"+post_url); if(hc.getResponseCode()==HttpConnection.HTTP_OK) { ConstantData.postURL=post_url; return; } if(hc!=null) hc.close(); } catch (Exception e) { System.out.println(e.toString()); } } } //for BIS Connection if(CoverageInfo.isCoverageSufficient(CoverageInfo.COVERAGE_BIS_B)) { //BIS Connection String post_url = ";deviceside=false;ConnectionType=m**-pu***c"; try { hc = (HttpConnection) Connector.open("http://www.rim.com"+post_url);//Connector.READ_WRITE if(hc.getResponseCode()==HttpConnection.HTTP_OK) { ConstantData.postURL=post_url; return; } if(hc!=null) hc.close(); } catch (Exception e) { System.out.println(e.toString()); } } //for WAP Connection if(CoverageInfo.isCoverageSufficient(CoverageInfo.COVERAGE_DIRECT)) { //for WAP Connection String post_url = null; ServiceBook sb = ServiceBook.getSB(); ServiceRecord[] records = sb.findRecordsByCid("WPTCP"); String uid = null; boolean connectionFlag=false; for(int i=0; i < records.length; i++) { if (records[i].isValid() && !records[i].isDisabled()) { if (records[i].getUid() != null && records[i].getUid().length() != 0) { if ((records[i].getUid().toLowerCase().indexOf("wifi") == -1) && (records[i].getUid().toLowerCase().indexOf("mms") == -1)) { uid = records[i].getUid(); break; } } } } if (uid != null) { post_url= ";deviceside=true;ConnectionUID=" + uid; } try { hc = (HttpConnection) Connector.open("http://www.rim.com"+post_url); if(hc.getResponseCode()==HttpConnection.HTTP_OK) { connectionFlag=true; ConstantData.postURL=post_url; return; } if(hc!=null) hc.close(); } catch (Exception e) { System.out.println(e.toString()); connectionFlag=false; } if(!connectionFlag) { post_url=";deviceside=true;apn=blackberry.net"; try { hc = (HttpConnection) Connector.open("http://www.rim.com"+post_url); if(hc.getResponseCode()==HttpConnection.HTTP_OK) { ConstantData.postURL=post_url; return; } if(hc!=null) hc.close(); } catch (Exception e) { System.out.println(e.toString()); } }} } catch (Exception e) { e.printStackTrace(); } finally { try { if(hc!=null) hc.close(); } catch (IOException e) { System.out.println(e.toString()); e.printStackTrace(); } } }
so now its works on WAP2, BIS and the WIFi works fine
the first issue of priority celluler TCP post code is also more WAP2 then
Thus, each transport time select TCP when BIS, WIFI not presend and need for apn
in any case, once again, thank you Peter and demo tools network dignostic is awasome...
-
Application does not connect to the server using WAP2.0
Hello
I used following code to get the suffix of the url that is required to connect to the application server using WAP2.0
if(CoverageInfo.isCoverageSufficient(CoverageInfo.COVERAGE_DIRECT)) { //WAP 2.0 String uid = null; ServiceBook sb = ServiceBook.getSB(); ServiceRecord[] records = sb.findRecordsByCid("WPTCP"); for (int i = 0; i < records.length; i++) { if (records[i].isValid() && !records[i].isDisabled()) { if (records[i].getUid() != null && records[i].getUid().length() != 0) { if ((records[i].getCid().toLowerCase().indexOf("wptcp") != -1) && (records[i].getUid().toLowerCase().indexOf("wifi") == -1) && (records[i].getUid().toLowerCase().indexOf("mms") == -1) ) { uid = records[i].getUid(); break; } } } } if(uid!=null) { if(AppConfigurations.DEBUG) System.out.println("Connected using direct WAP2.0...."); return ";ConnectionUID="+uid; } }
I am same ConnectionUID as present in this complete book in Options in the device.
Even application does not connect to the server using WAP2.0.
Let me know what other things should I check to make application to connect to the server using WAP2.0.
My phone is BB 8900 and OS 4.6.1
WAP connection will pass through the gateway of the carrier. This gateway can oppose your respect, or might be trying to optimize the data, or can display a login page for you. Try the same URL that you use in your program, directly with the WAP browser on the device and see if that runs through effectively.
-
BlackBerry 10 Again... texting does not transfer to my Q10/Z10
I know this has been discussed a lot, but I don't know what is info/news. so I bought this Z10 a few weeks ago and NEVER used because when I tried to upgrade my device to the new, it does not transfer my SMS/text messages on the new device.
I tried MANY times. passage of my 9780 to Z10 using Mac... everything transferred excpet my texts.
Tried to use maneger Office on my PC and everything is still there except my text messages.
tried to go to my 9780 to 9360 (since its execution OS7) and then tried to go to Z10 9360 again the same question... SMS still not there...
When I used the link and put two devices, it shows that everything, including TEXT Messages transferred fine without problem
tried to make a backup of card media and then restor inside the Z10... always the same question... without SMS/text
I can see the names/numbers of the people who texted me on my older device (also the exact order in which the texted me on my old camera) but when I opened them they are just empty. nothing is there
So I deiceded I'll just sell the Z10 (which I did) and stick with my old camera because there is no way I can use it without my old texts... and I didn't like the keyboard so it was kinda ok...
in any case, I bought a Q10 now because it has a keyboard (which was the main problem with the Z10 for me) and went through everything above! everything is always transferred except my text messages. I was playing with it and tried to find words of my text messages and I was able to find some OLD text messages (like 1 + years or maybe more) but that's all.
For the moment, I try to use Blackberry Protect and hoping for the best, but something tells me it won't...
any ideas on what I can do here? All I need is my only problem it's SMS/MMS. I spent hours today reading online, trying different things and not luck. The same thing when I had the Z10... I lost hours and hours and eventually sell it and lose money without actually using the device for more than one hour of actual use
I want this thing to backup/restore is just as easy as the iPhones or older blackberry devices
Please help me before I go back to my old blackberyy because it's what I have to do if it works not once again... that SUCKS!
OK well it kinda worked. For some reason, only certain contacts text disappered but I me am I'd say about 80% of my texts. that is great! but my new question is this. I noticed that some texts does not show the name of the contact, so I thought that maybe it still load all contacts from the back to the top. so I let him, but none of the names of contacts displays now? I checked and it does not show my contacts info are there with the number correct and everything, but in the text any name! only phone numbers! I have the contacts record with country and area code but still...
-
Audio BlackBerry Smartphones BlackBerry Curve handset does not work
This has happened much latley, I don't know if I am pressing a wrong button in my pocket or not. When I make a phone call or someone calls me. They can hear me but I can't hear them. If the audio does not work on my end.
It is a common problem among people who open MMS messages with sound. So far, the only solution is a battery pull. I read that RIM knows about it and is working on a patch.
-
Silent automatic update of flash player does not
I was happy to read the news on the new Adobe Flash player silent auto update feature, but unfortunately this does not work on my machine. All the world had the same problems and was able to resolve?
Some information about my setup:
I had already installed Flash player, version 11.1.102.63, ActiveX version and plugins (installed in the .msi files, deployed through Active Directory/GPO - no additional configuration, simply .msi original files).
To test the automatic update feature, I decided to install the 11.2.202.228 new version, but only the ActiveX version. I installed this via the installer .exe (install_flash_player_11_active_x_32bit.exe) manually, choose ' Install updates automatically when they are available (recommended) "in the last step of the installation, as shown here:
http://www.Adobe.com/devnet/flashplayer/articles/background-Updater-Windows.html
When I open Control Panel-> Flash Player, on the 'Advanced' tab I see:
- "Install updates automatically" is selected but grayed out (without right to admin with this windows user)
- ActiveX version: 11.2.202.228
- Plugin version: 11.1.102.63
The "mms.cfg" under C:\WINDOWS\system32\Macromed\Flash\ file contains:
AutoUpdateDisable = 0
SilentAutoUpdateEnable = 1
The task of "Adobe Flash Player Updater" has been created and is scheduled to run every hour. I see that it is started ('last start time'), the result code is 0x0, which means "no error".
So, just as expected. But the automatic update does not work, since the flash player plugin version is never updated!
I edited the "mms.cfg" and added:
SilentAutoUpdateVerboseLogging = 1
After manually from the task, there are a few lines added to "FlashInstall.log" in the same directory:
2012 4-4 + 7-20 - 48.814 [info] 1614
2012 4-4 + 7-20 - 48.829 [info] 1615
2012 4-4 + 7-20 - 48.829 [info] 1618
2012 4-4 + 7-20 - 48.829 1619 1063 [info]
2012 4-4 + 7-20 - 48.876 [info] 1614
2012 4-4 + 7-20 - 48.876 [info] 1615
2012 4-4 + 7-20 - 48.876 [info] 1618
2012 4-4 + 7-20 - 48.876 [info] 1608
2012 4-4 + 7-20 - 48.876 [info] 1604
2012 4-4 + 7-21 - 10.425 1403 12029 [warning]
2012 4-4 + 7-21 - 10.425 183 1407 [warning]
2012 4-4 + 7-21 - 10.425 [warning] 1408
2012 4-4 + 7-21 - 10.456 [info] 1624
2012 4-4 + 7-21 - 10.456 [info] 1612
2012 4-4 + 7-21 - 10.456 [info] 1621
What does that mean?
More information:
- Windows XP SP3, install all windows updates, German
- Software antivirus Avira Security Professional
- Machine is behind a proxy server, but it is set up in the control panel-> Internet Options
I guess that there is a problem with our proxy server. The automatic update does not use the proxy information, the settings of the Windows Control Panel?
Kind regards
Martin
Hi Steve,.
This error is probably due to the fact that you have selected "Require client certificates" on your Web server. Please untick this and try again. If you still see errors, please post a new log with the error codes after you make this change.
Thank you
Stephen
-
iPhone 7 more buttons outside does not
I've had my iPhone 7 + for about 2 weeks now. Every once in awhile all buttons outside to stop, volume up/down, power, home. The home button will still record and push and give the sensation of taptic and touchID works. The phone itself still works and I can answer texts and which do not use notifications.
The couple spent time he did, he came upon her in about 4-5 minutes, however it was about half an hour and still nothing. I want to restart my phone, but the switch does not work.
Has anyone seen this issue or know how to fix?
Thanks in advance.
I just experienced the same problem on my iPhone 7, I think it's a bug in iOS, but I am using iOS 10.0.2. Power + button low Volume allowed me to turn it off then turn it back on... Apple please fix this bug!
Maybe you are looking for
-
Hi all I hope someone could advise me. My partner has put all my photos on my iphone 5 c on my icloud on my laptop on Friday. I had a peek yesterday and there is nothing there. Don't know what to do and if I lost all my photos. Can someone help plea
-
Can satellite M40x-183 - I switch from XP to Windows 7?
Is it possible to switch from Windows XP to Windows 7 on my Toshiba Satellite M40X-183?
-
How can I withdraw a shared album?
How can I withdraw a shared album?
-
How to stop excel from opening during the recording of the data?
Hello I am trying to save data in an excel file and I constantly use the same file to update the information. The problem is, every time that I update or create an excel file, it actually opens an excel window. I want to create and save data without
-
Hi all I'm currently trying (and failing!) to set up an event from a display Image window reminder in CVI. All that I need SIA a collation of co-ordinate of Pixel that was clicked I try to use SetEventCallback, but am not sure how to set up the Event