MN - 700 router worked for a while (over 3 years) without password. How to set a password? __

MN - 700 router worked for a while (over 3 years) without password. How to set a password?

MN - 700 router worked for a while (over 3 years) without password. How to set a password?

This is a pretty old router, but documentation is still available from Microsoft:http://support.microsoft.com/kb/902461 the 'Guide' is more complete, but the "Base Station Configuration Guide" will explain how to configure the router.

I guess what you mean by a "password" is the password for the wireless encryption (there is also a password that controls access to the router configuration utility). The following are the basic steps to configure wireless encryption (see the documentation for more details and screenshots):

1. utility access to the router configuration, preferably with a computer connected to the router with an Ethernet cable (if you change your wireless security, the parameters using a computer connected to the router by wireless, the connection will be abandoned as soon as you click APPLY).  Open a web browser and type 192.168.2.1 in the browser address box.  If you have not changed the logon password, enter 'admin' (without the quotes, all lowercase).

2. click on the "Security" link on the home page of the configuration tool, then "Wireless Security".

3. Select the "niveau_chiffrement" in the combo box to "256-bit WPA - PSK (louder)" - unless all of your wireless devices are so old they don't support WEP (unusual for a wifi device years less than 5 or 6).

4. in the box, type a password (between 8 and 63 characters), and then click 'apply '. at this point, you will be disconnected from the router (and the Internet) If you did the above changes using a computer connected to the router WiFi.   Write the password in a place where you don't forget.

5. close router configuration utility.

To set up your wireless computers:

6. open network connections (start > run > ncpa.cpl > OK)

7. right click on your wireless adapter icon and select Properties.

8. click on the wireless networks tab

9. make sure the box at the top next to "use Windows to configure my wireless."

10. in the list of "Preferred networks", select the entry to your router (your network name), click on 'delete '.  [This deletes the entry from your wireless network WITHOUT a password, so that you will be able to add an entry for a network with the same name WITH a password.]

11. click on the view wireless networks"" button.

12. the name of your network should appear in the list of wireless networks.  Select it and click "connect". When you are prompted for the password, enter the WPA password set in the router configuration.

13. open a web browser and confirm that you can access the Internet.

Tags: Windows

Similar Questions

  • Replace with clip > source monitor works not properly. Work for a while, then starts to replace the bad clip?

    So I have to use this feature pretty well all day of editing and I'm having to restart first cc pro 2014 more to solve the problem. He works a lot is the best way to keep my changes and edit the clips but then suddenly she starts replaceing bad clip that is NOT in the monitor source... then I have to restart and it works for a while longer until I have to restart all over again... I edit images of car used cars, and time is money. wish really paying for software im worked properly... theres also audio issues that do similar things but I'll start a new thread when I have the time for that one.

    Hi kebmedia,

    Please provide us with more information on the graphics card, the version of the driver and the OS you use. This problem usually occurs due to cache media files. So, please go ahead and manually remove the media cache files and let Premiere Pro regenerate their. The location of the media cache is mentioned below. Make sure you only close Premiere Pro before following these steps.

    For MAC: User > user library > Application Support > Adobe > commune > Cache of media and media Cache files

    For Windows: C:\Users\dwivedi\AppData\Roaming\Adobe\Common/Media Cache and Cache media files

    Folders can be hidden so please see the Documents below to view folders.

    How to view folders in Windows 7: 8 steps (with pictures)

    Access the hidden user library files. Mac OS 10.7 and later versions

    Kind regards

    Vinay

  • Satellite L855-188 runs slowly - a few apps stop working for a while

    Hello

    I bought this laptop there is an upgrade to a week of the dell studio 1558 and it is most powerful spec wise, and I will admit windows 8 makes things a little strange, but I have problems with the laptop:

    Sometimes the laptop works slowly and some applications such as chrome and steam and Skype just stop working for a while and sometimes require applications to be reset to zero before they will work again and chrome has developed a bug that doesn't let it open if I click with the button straight on her and say to open a new window

    The without wire will fall randomly and won't open the Connections window, the devices show as being active, but cannot enable or disable it or find or even open wireless connections menu for connections to find this can be solved by a system reboot... I have updated the drivers for the wireless to the most recent for the Atheros card

    He do not restart, shutdown or sleep when asked to do the screen turns off, sound as his preparation to close and say with the darkened screen suspended in the closing state until he either cut his own power or I hold the power button to force it to turn off.
    I have updated drivers available on the Toshiba site like all the AMD drivers say they are incompatible

    Help would be appreciated, I don't want to send it back or to try to get back into windows 7 or something dramatic

    To me that sounds like a large number of programs, applications, and processes are running in the background.

    You can try to restore and repair the system:
    [Windows 8 recovery & repair | http://aps2.toshiba-tro.de/kb0/TSB2A03ES0000R01.htm]

    If you want to use PC Restore option, you get the same State as at the first day of the purchase. Worth a try.

  • iPad flashing constant Air... can't even thug off the coast.  Upgrade the software, but worked for a while.  Can't do anything else.

    iPad constant Air flashing... cannot even turn off.  Upgrade the software, but worked for a while.  Can't do anything now.

    MY husband fixed this problem by pressing power and home buttons.  Duh...

  • 'Software update' has not worked for a while?

    'Software update' has not worked for a while? Also 'DEFENDER' lights not...

    Duplicate of http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_update/software-upate-will-not-work-for-me-for-quite-some/d0c0277d-59ae-4756-8b03-c16164c596e6 (November 19, 2012)

  • Problem dual screen ' after working for a while, the screen of my laptop turns off.

    Original title: Problem dual screen

    I use two screens (laptop screen and separate screen) to work. Windows 7 operating system. After working for a while, my laptop screen goes blank as if he goes to the standby mode. The monitor never goes out. Is - this cos win 7 does not support the spl double screen laptop computer and monitor at the time of amse?

    Support COMPUTER told me he can't stand not and laptops are not designed to function as a two screens? Please notify.

    KR

    bs3dm

    Portable computers support two monitors. The problem may be caused by two reasons:

    1. incorrect power setting.
    2. the problem with the drivers.
    1. you can download and open Microsoft Fix it for the question.
    2. update the display drivers. If no update is available, uninstall the drivers (and software), restart the PC, install the drivers (and software), restart the PC and then check.
  • I just got a chat session with unnecessary failure to load Adobe. I bought LR6 in September. He worked for a while. Now my develop the module is disabled and it says that I have to put the licensed software. I have my number series but for some reason, it

    I just got a chat session with unnecessary failure to load Adobe. I bought LR6 in September. He worked for a while. Now my develop the module is disabled and it says that I have to put the licensed software. I have my number series but for some reason any it not reactivate my software. I downloaded the software directly from Adobe. I paid for the license from Adobe. I have a serial number adobe, but nothing works.

    Hi iamangryatlightroom,

    Please refer to the related discussion and follow the steps to solve the problem.

    Reference: Lightroom 5.5 'Module Development disabled, please renew your membership'

    Let us know if that helps.

    Kind regards

    Mohit

  • I am Master Collection CS6 owner for a little over a year and am slowy upgrade from older versions of programs.  Still using DW MX 2004, but now need to put in place DW CS6.  Looking at my downloaded packages I see DW CS6 anywhere.  Grateful for

    I am Master Collection CS6 owner for a little over a year and am slowy upgrade from older versions of programs.  Still using DW MX 2004, but now need to put in place DW CS6.  Looking at my downloaded packages I see DW CS6 anywhere.  Grateful for the help on it so I can start using DW CS6.  / Curt

    If you own the CS6 Master Collection and no other product CS6, then this is the product, you must install.  No one else will not activate with your Master Collection serial number.  Through the Master CS6 Collection, you install the individual applications.  Dreamweaver should be included in this Collection.  You can see all the applications of the Master Collection on the next page: multimedia design software | Adobe Creative Suite Master Collection 6

  • Drop-down boxes as those used for the dates do not work and try to work for a while. What is going on?

    Drop-down boxes have not worked for the last few revisions of
    Firefox. I tried to eliminate all add ons etc. little nothing is done. For this
    not appear as it should be a big problem to solve, since these
    objects used to work properly in the past. I love otherwise Firefox
    and do not want to use a different browser. The drop-down list below does not either, but maybe it's the lack of content.

    Yes, I disabled everything. Even changed themes of Windows 7, but not luck.

    After sending this reply, it dawned on me that actual window guard can be
    the problem. When I excluded the window Firefox actual window guard
    control the drop-down boxes worked. Wish I thought of it earlier. Thanks to all those who have made suggestions and tried to help him. I really appreciate your time and efforts.

  • Re: Satellite Pro 6000 hesitating behavior after having worked for a while

    My SP6000 10 years old running Windows 98 starts and works fine, but very often after 10 minutes (more or less), it will start to answer 'hesitating', which is as well the mouse and the keyboard may take several seconds to answer each click or movement.
    The machine do not crushed, and the fan continues to pass in and out. More generally, a normal behavior is restored after a restart, or sometimes it will return its own if left alone. The problem seems also worse if you have several windows open at the same time.

    I am inclined to think that it may be related to overheating, with the central unit to stop a few seconds at a time, and then meet again for a second or two.

    Unfortunately, I do not know if the problem has a story that I acquired antiques only recently.

    Thanks for any ideas?

    I put t know how long do you use Windows preinstalled, but I think that your laptop needs to be cleaned and you must install OS to have own stuff pre-installed.

    Have you can be upgraded to RAM at maximum value? This isn't a bad idea. For this old laptop RAM modules are not expensive and more.

    With a few words: I think your laptop needs overhaul.
    What do you think?

  • have to hit the router works for a connection

    Since I'm router not all wireless connections in the office laptops and Xbox fine except for an old laptop to connect, I have to hit the router and the

    Hello

    Look for the updates driver WiFi (wireless) of the computer with the system manufacturer
    If integrated and, if the device manufacturer a separate device.

    Also check the website of the manufacturer of the router for firmware updates.

    Is this computer located at a distance from the router or are there obstacles on the way?
    Try to close the laptop as a test - but not too close, usually 6' away or almost.

    I hope this helps.

  • I have Win XP Pro aiinstalle and work for a while, I updated the firmware CD, now, it's asking to reactivate windows.

    I've updated the firmware CD now it asks for a product key, I used this laptop for severla months, I get the message that the key has been used too many times and you need a new key.  I bought the laptop from a company farm selling off its old stock.

    Try what it sounded just like it has been reinstalled several times.
    How to activate Windows 7 manually (activate by phone)
     
    1) click Start and in the search for box type: slui.exe 4
     
    (2) press the ENTER"" key.
     
    (3) select your "country" in the list.
     
    (4) choose the option "activate phone".
     
    (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
     
    (6) explain your problem clearly to the support person.

    I hope this helps.

  • When I change a video loaded down in full screen, the video stops often but audio and small screen are when I again switch to full screen it works for a while and can repeat the problem.

    I don't know what I can add

    Hello Bukers,

    Thank you for your message.  Make sure that you have the latest video drivers for your system.  Go to the web site of the manufacturer of your computer and download/install the latest video driver for your device.
    Please let us know if it did or did not solve your problem.
    See you soon

    Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

  • fingerprint sensor does not work for my iphone 16 6 GB pls help how to solve this problem?

    I have iPhone 6 grey 16 GB of model space suddenly my fingerprint sensor no longer works.

    When I try to set touch id always displays "failed please go back and try again".

    Please guide how to solve this problem.

    The warranty expired 3 months ago

    See this support document to help solving the problems of contact ID. If all else fails, then make an appointment at the Genius Bar from the Apple Store supplier or Service Center authorized Apple closest to have the material examined. They will explain your options.  Use touch on iPhone and iPad - Apple Support ID

  • A router Asus, separate the 2 Web servers on 2 computers, how to set up?

    LabVIEW 2012, windows 7 Pro on computer A and windows 7 on the computer B.

    Computer A and B are connected to the router using the wifi.

    IP address of the computer A is 192.168.1.76

    IP address of computer B is 192.168.1.79

    Now, the router is configured so that it publishes the Web server on computer A, i.e. when I type, 128.200.xxx.xxx:80, he directed me to the Web of LabVIEW server on computer.

    Is it possible to have the Web of LabVIEW server on computer B come into play, using the same router?

    Thank you.

    -Chen

    --------edit-------------

    I forgot to mention that I tried to connect from Wan

    You simply run the second server on a different port.

Maybe you are looking for

  • New Satellite Pro L670 - 14 M turns on if the charger is plugged?

    Hi all New to the forum so grateful for any help on this matter. I bought a brand new laptop Satellite Pro L670 - 14 M last week. Now it works fine up until today. The last time that I used it while just running the battery was Monday night. I was wo

  • Problem USB 3

    Hp Pavilion product HPE - b4j27av, Windows 7 Home premium X 64 operating system I installed a Backup Plus a 2 TB Seagate external hard drive USB 3.0. Although I connected with a USB cable to a USB port on the HP it willnot at speed 3 USB transfer. Wh

  • cannot print maik fromATT messages. Any suggestions?

    Just send a note, sorry about the spelling mistakes. Lew

  • Dell Latitude 5540 recovery

    Hi all I have a Dell Latitude E5540 I bought this second hand and the hard disk is formatted to a single hard disk and has no software of dell, he would be provided when new, can someone tell me if I can get the drive to factory condition as I want t

  • Citing a telephone call, a sign more is automatically added!

    Hello Im trying to invoke a telephone call by using this code: PhoneArguments call = new PhoneArguments(PhoneArguments.ARG_CALL, phoneNumber); Invoke.invokeApplication(Invoke.APP_TYPE_PHONE, call); The phone number is the local telephone number 11 nu