Mobile broadband - connection limited

Hi all

I use a Tablet 2 with an Ericsson 5621 gw adapter and a Vodafone Egypt USB SIM card (which works fine in my Sony Ericsson Xperia arc phone including creation of hotspot & using internet etc.).

Now, I can connect to the Vodafone Mobile Braodband, but always only with a limited connection (no), the driver is new, the unit works fine, no probs, same connections complete shows and stable access connection to Vodafone, only the network in windows 8 32-bit dialog box indicates limited access, and it is, says the Device Manager.

The thing is it worked fine for a while, the only thing I changed since then was to try if the hotspot feature worked (which is not, and how boring is that), so I disabled the hotspot, and since then, the mobile broadband network is limited.

I also checked my normal Vodafone SIM card (which has also a data volume of 5 GB or more and also works well in my Xperia arc incl. internet and hotspot), with same result, ditto my SIM Lenovo Mobile Access.

where is this option to restart? must be somewhere... Please?

BR

Klingsor

OK, now here is the solution:

After many trials, I uninstalled the network broadcom adapter, re-installed with pilot (to date), and connectivity was back to full.

Tags: ThinkPad Tablets

Similar Questions

  • Envy 14 Sellkbook 14-k027cl: available after upgrade to Windows Mobile Broadband connection no. 10

    After the upgrade to Windows 10, there is no option to connect to the T-mobile Mobile Broadband. In the Device Manager.

    HP hs3114 HSPA + broadband device enumerator Mobile USB has a! next to him. When I look at the properties, the device status is:

    This device cannot start. (Code 10)

    The device is not in a valid state to perform this request.

    touchabu

    After the upgrade, please activate the, net

    install the frames

    Control Panel > turn Windows feature on net. 3.5 a 4.6

    reset

    the new HP hs3110/hs3114 pilots Mobile Broadband

  • NB 100: How - top connection Orange UK mobile broadband (usb icon 225 stick)

    I just managed to get my connected nb100, here's how:

    Step 1 - enter the SIM card - instructions provided with the device

    Step 2 - upgrade of the network manager

    #Right click the icon of your management network at the top right and select "about". If it is less than 0.7 (such as mine) upgrade is necessary.

    #upgrade to the network manager > = 0.7
    > sudo gedit /etc/apt/sources.list

    #add the following at the end:
    > main deb http://ppa.launchpad.net/network-manager/ubuntu hardy
    > deb - src http://ppa.launchpad.net/network-manager/ubuntu hardy main

    #save, out, run Manager Update, install updates and restart the computer. If the Network Manager icon is not present - stops completely. Should appear after turning back.

    Step 3 - install the driver OHSS and ozerocdoff
    Locate and download the latest version (1.9 in my case) here: http://www.pharscape.org/forum/index.php?board=14.0

    > cd Desktop /.
    > tar zxvf ass - 1.9.tar.gz
    > cd hso_26 - v. 19.
    > sudo apt - get install build-essential
    > sudo apt - get install linux - headers-'uname - r '.
    > do
    > sudo make install

    Locate and download ozerocdoff
    > cd... /.
    > tar zxvf udev.tar.gz
    > cd udev /.
    > sudo make install

    Step 4 - configure connection
    Right-click on the network manager, and then select "Edit connections" > mobile broadband. Change the listed connection and insert the following code:
    username: orange
    password: orange
    APN: orangeinternet

    When you plug your icon 225 it must connect now.

    When you want to disconnect, pull the icon 225... I tried to use the disconnect on the Network Manager option and my laptop crashed...

    Feel free to copy and improve this howto.

    Dan

    Great! Thank you would be useful and interesting to other people here.

  • TOSHIBA f3507g cannot connect to mobile broadband from 3G (error code 0)

    It's really a strange situation. Yesterday I installed the latest 3GRF POWER UTILITY and driver F3507g 3 G then inserted the SIM 3G, my laptop can connect to the internet (HSPA) normally, but today when I download and install the latest software WIRELESS MANAGER in others to check data and texting, but now my laptop cannot connect to the 3 G network but that laptop still the 3 G signal. I also tested for texting on my phone and it works but connect to the 3 G internet is impossible. I tried to uninstall all the drivers of 3G and reinstall it again, but it does not work. When I cheking troubleshooting, he said that "the operation of network connection mobile broadband failed with error 0". I use win7 and download the driver 3G [http://aps2.toshiba-tro.de/wlan/]. Please help me, thank you very much!

    Hello

    What operator and SIM are you using? It works if you connect through the Win7 built-in connection manager? That is to say through her view available networks?

    Since you are able to receive text Messages, you can register properly to the network. This should be a profile/network problem. It works if you create a manual Profile Manager wireless with the correct settings for your carrier?

    It works if you use square DUN? See Howto on http://aps2.toshiba-tro.de/kb0/HTD9802OF0000R01.htm

  • 5901tw flow 8: [Please help] unable to connect to 4G network card, driver missing HUAWEI Mobile Broadband Module

    Hi all

    I just bought 8 streams HP 5901tw 4 days ago, yesterday, after internet connection using my card of 4G (WWAN driver) in my Tablet 8 Stream, suddenly the internet connection dropped and I lost my 4 G network card. I don't know why it happens by itself. But for connection Wifi still works well and wifi interface is always detected in network adapter but 4G is missing from the list.

    In Device Manager I see list of pilot missing in other devices-> HUAWEI Broadband Driver Module is missing from my Windows with Bing 32 bit OS 8.1. I try to find the driver through windows update, website of hp or other sources, but is not found. I also tried to update the BIOS firmware to the latest version and upgrade of such software firmware driver LAN, etc. from the HP Web site, but still can not fix missing pilot of the HUAWEI Module of high speed.

    I also try reboot several times, making recovery, but still having lack of driver for HUAWEI ADSL Module.

    Last effort, I try to current level Windows 8.1 to Windows 10, but still no conclusion success lack driver HUAWEI or fixing my 4G network missing question.

    Now I can still connect to the internet with my 4 G card more every trip.

    Someone there solution and how is address/where to download those missing 4 G network driver (HUAWEI ADSL Module) 8.1 for Windows or Windows 10 HP 5901tw 8 streaming?

    Really appreciate for any help and answer including HP support.

    It's really annoying to have this problem and get stuck without a solution. I just enjoy this new Tablet HP for 2 days and now unable to connect to the 4G network more.

    Thank you.

    Kind regards

    Wachyu

    I finally found the problem with the HUAWEI ADSL Module in my stream 8 HP (after 2 days of sleep trying to install and uninstall the driver and try all options).

    It seems maybe some Windows Update or a driver is trying to change the firmware inside the card top debit MOBILE HUAWEI to download mode (VID:12 d 1 PID:1568), so it can't use any driver installed in point 8.1 of Windows.

    I tried to manually change the download mode inside the HUAWEI tools firmware: Revskills (B. Kerler credit) return to the standard mode and then reset, then the Device Manager will detect again under the new material in NIC as HUAWEI Mobile Broadband Module (VID:12 d 1 PID:1570) and automatically installed its driver from Microsoft.

    VOILLAA, My Mobile Broadband can now be re-used to connect to Internet and now also presented in the connection.

    A lot of delicate here to force Windows using HUAWEI driver to use the COM Port to communicate with the card mobile broadband HUAWEI inside and then using Revskills tools to change the mode to return to standard mode.

    If someone knows this problem and wants my help, just ping me and I'll be happy to help you in the orientation.

  • How can I connect a laptop to mobile broadband

    WiFi is fine. Ethernet ok too.

    Hi raymondash,

    1. What is the operating system installed on the computer?
    2. Who is the operator of mobile telephony to wide band?

    I suggest that you install the software provided by the service provider to mobile broadband and also refer to the manual supplied with the unit.

    For more information, contact the provider of mobile broadband services.

    What is mobile broadband?

    http://Windows.Microsoft.com/en-us/Windows7/what-is-mobile-broadband

    Allows to connect to the Internet mobile broadband

    http://Windows.Microsoft.com/en-us/Windows7/use-mobile-broadband-to-connect-to-the-Internet

  • mobile broadband stick too big causing me not able to connect my wireless receiver optical mouse

    ACER dear community,

    I need your help or solutions. My problem is about my mobile broadband using stick and wireless optical mouse at the same time. I just bought a laptop Acer V13 and excited to use when I'm out and about. I have more access to public wifi and that's why I have this mobile broadband USB which I bought at my local service provider so that I can connect to the internet with it. This stick allows me to connect to the internet with a prepaid SIM in it. I'm sure you know what I describe about. I'm just explaining in detail. In any case, my stick is kinda huge. Then, when I plug in my USB port 1, I can't plug my mouse receiver into the other USB port wireless because the stick took so much space. I wish the USB ports were in separate locations, or at least a few inches on the other. Is there anyone out there who can give me suggestions or ideas on what to do? I know that this question is lame, but ideas and suggestions will really help me. Thank you very much!

    As mentioned above. I discovered that I can not use several hubs extension BUT... it works when you use usb single exntension. Managed to solve the problem and I finally can I plug my mouse wireless receiver so my stick mobile broadband. See photo!

  • You can use the same connection to mobile broadband on your laptop & a smart phone?

    You can use the same connection to mobile broadband on your laptop & a smart phone?  IE, exchange between one & the other not use both at the same time?

    Hello

    I suggest you according to the question in this forum and check if that helps:

    http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking

    It will be useful.

  • Can I connect to mobile broadband, I have a 3 G SIM

    Hello

    I am in Europe.

    My X 220 has a SIM slot and is 'mobile broadband ready.

    It is, he has a built-in 3G modem? Or is "mobile broadband ready" refers to something less than that?

    I put in the internet broadband SIM in the phone (wasn't sure about the direction of the SIM card) and can not select the option "mobile broadband" in the form of the access connections from Lenovo, in the box ThinkVantage tools.

    Thank you!

    Eoin

    Eoin wrote:

    I have already installed a drive mSATA under the keyboard.

    Just to be clear, it is a different connector for PCI Express Mini Card Slot, right?

    The slot when you install this player mSATA is also the internal WWAN slot... Unfortunately you can't have 3 G internal and mSATA simultaneously.

    See you soon,.

    Bill

  • Huawei Vodafone Mobile Broadband (error code 4) does not connect

    I just bought a WiFi R201 Vodafone for my MacBookPro (10.7.2) modem and it works OK.  I wanted to use the update of the firmware Vodafone for the modem, but the only firmware update is for Windows.  I have W7 running on the VM 4.0.2.  When I plug the USB cable into my Mac with W7 on, the Mac takes up no matter how, I have my settings and I get the above error: unable to connect to the "Huawei Vodafone Mobile Broadband (Huawei)" USB device to the virtual machine (error code 4).  Contact VMware, Inc. technical support for assistance. »

    Someone at - it experience with this?

    It's a workaround:

    http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=2007368

  • Portege R830 - forcing mobile broadband using 3 G/HSDPA with Win 8

    Hi all

    Updated my Portege R830 to Windows 8 without problem.

    Given that most of the Wireless Manager functionality has been moved in the Windows, I can not find where I can "force" the connection to 3 G/HSDPA.

    I live in an area where the signal is insufficient and if I let the network default settings, it frequently goes to the strongest EDGE connection. I connected with Wireless Manager, using only 3 G/HSDPA where 2 bars were sufficient for everyday tasks.

    Moments of light bulb? (Travel is unfortunately not an option... ;))

    Hmm, I think that this parameter isn't available in 8 Win.

    Microsoft provides a nice article on configuring broadband to help to win 8 and mentioned configuration isn't it:
    http://Windows.Microsoft.com/en-us/Windows-8/mobile-broadband-from-start-to-finish

    From my understanding the best signal to broadband will be selected and used if it is available.,.

  • Satellite A100 - BT mobile broadband

    Here's an email from BT, I just can't get their mobile broadband services working with my Satellite A100

    Hi Mr J Cairns,.

    further to our conversation regarding your problem with Broadband BT's Mobile on Windows 7, we have concluded that the fault is caused by its windows 7 autonomous, there seems to be a problem with Dial-up networking on the computer, our software indicates that there is a problem with the "Remote Access Connection Manager service" and try to manually start the Service generates an error about its dependencies.

    My only suggestions to solve the problem is to contact your PC vendor for diagnosis or to perfom a factory restore on the computer, the provider of your PC will be able to help with this, we will contact you in a few days to see how you have progressed with the question and if the advice I gave helped resolve the issue.

    Any advice appreciated

    LOL :) such emails are very usual for service people who don t know what the problem could be it of very simple for someone point to the manufacturer of the computer and computer question s say.

    Can I ask you what problem do you have?

    I assume you are using a 3rd party Bluetooth modem and are not able to install Win 7 usign?
    Am I wrong?

    Why this should be a laptop problem?

    As mentioned in your message, the question could be between BT and Win 7 modem.
    In my opinion the BT modem manufacturer should provide you with assistance.
    There may be some problems between BT and Win 7 modem configuration?
    Who knows.

    Are you able to connect other devices BT the A100? Yes? Well in this case, the battery of BT is installed correctly.
    Otherwise I would recommend reinstalling the BT stack and set it up again.

  • Portege R600 - 12 H - touchpad, footprints digital, of mobile broadband questions

    Hi guys,.

    First of all, as a new user, I want to apologize if some of my difficulties have already explored in some other threads, although I searched and not found.

    I bought a Toshiba Portege R600 - 12 H with Windows 7 Professional.

    Currently I have 3 problems:

    -My touchpad moves the cursor without that nobody has pressed the button. By example, if I move the slider at the top of this text and start typing, in a few moments I'll be typing at the top of this text. Anyone have any ideas?

    -Because I'm having all questions of this pillow, I have a bluetooth mouse that works very well. I keep on disable the pad with e FN F9 work, but disable it, I am also disable the fingerprint sensor. When I try to log in with my fingerprints, nothing happens, and if I try to run the utility of fingerprinting toshiba, it displays a message saying: "it is not possible to connect the sensor.

    -Technology mobile broadband 3g toshiba does not. It recognizes the SIM card, but I am not able to make any type of connection to my ISP.

    Thank you for any assistance that you could bring about that.

    Hello

    Do you use Manager to connect 3g wireless or use other dashboard software? or a dial-up connection dircet?

  • R7000 as router with the router for mobile broadband Internet

    Hey guys. First of all, my apologies for my somewhat inadequate English skills. Secondly, I am brand new to the community, so apologies in advance for any fault :-) Third stop, apologize for having a complete beginner :-D

    So, for the issue: I recently bought a router top mobile broadband 4G (4 G MBR) to my apartment, because of the gap of strength and speed signal very low quality of the cable to the ground on my Street (fiber is to come next year).

    But the router provided by my operator isn't on par with my router R7000 Nighthawk when he comes to reach wifi, wifi speed, number of outputs of LAN and power of the processor.

    So, I want to use my R7000 my router, the internet signal from the air to the 4G MBR, then by cable to the WAN of the R7000.
    In other words; I want to just 4G MBR to simply pass / transfer the internet signal to my nighthawk R7000 router so I can use the R7000 as my router, LAN and wifi.

    How can I set this up?

    Thanks for your help!

    Update: the MBR has been no help at all. As far as I could tell, there is no possibility to bridge or pass-through mode. The R7000, as she does the work. I just put it in AP mode, adjust all the wired connections DHCP/auto IP assign and everything works great.

  • L440 can't find the Mobile Broadband

    I have L440 with Win7 64 bit. Earlier experienced major WiFi connection problems, which have been set with the card WiFi and BIOS update driver.

    Briefly after that this master of radio wireless control no longer mentions Broadband Mobile, it doesn't show 802.11 wireless/Wimax and Bluetooth.

    Network connections Windows lists "connection Mobile Broadband" as "not connected, N5321 gw Driver Mobile Broadband. Diagnose this connection gives thinking about 'Spin on a high capacity mobile broadband', which I can't do because it is not listed in the master of radio wireless control.

    Any suggestions?


Maybe you are looking for