Mobile Data Protection sensor driver?

Similar Questions

• Clubhouse dv6: HP Mobile Data Protection sensor

  It is better to install? Or this would create problems for my laptop works properly? Also, would you please explain what actually makes the HP Mobile Data Protection sensor?
  
  Thank you.

  Hello

  It's a safety device connected to the hard drive.  If the Mobile Data Protection sensor detects that your laptop is declining, it loads the disc HARD to park the drive heads to try to avoid damage to the drive.

  I installed Windows Technical Preview 10 on several machines and find no problem with that, even if it is possible, you may need to install an updated driver (this is provided by HP 3D DriveGuard software) when you upgrade to 10.

  Kind regards

  DP - K

• Windows 7 Pro x 64 does not detect HP Mobile Data Protection Sensor (accelerometer)

  Hello.

  I installed win7pro x 64 yesterday and already fallen on a serious problem, which is how I use the laptop a little dangerous for my valuable data.

  When I was working on HP Vista 32 bit (of the partition recovery etc.) brand, it was a device called the HP Mobile Data Protection with HP ProtectSmart software sensor (or protect Smart). In other words, the accelerometer HDD which parks the HARD drive heads when it "feels" it is down or something and the software for it. It has worked flawlessly.

  
  

  Until I decided to install Win7... And then, surprisingly, after failure of driver install and take a look in the Device Manager, I have noticed that there is no such device. I checked three times, looked at property of each device, even reinstalled Vista 32bits back - he has shown again - and installed Win7 - not detected again. There is nothing that has the HPQ004 device ID! I remember people saying that after that fresh Windows installed, there are 6 unknown devices or more. I got only 5. [Device fingerprinting, 3 x MemCard player and IR receiver]. There is no accelerometer... Also, when I try to install the drivers/software, windows appears:

  ProtectSmart Hard Drive Protection: with the text Property.AccelerometerNotPresent

  and then another saying something like features were not installed due to wrong installation or not supported feature.

  So now I'm stuck with a laptop it is dangerous to travel with, because the disk is no longer protected

  I have already installed all the drivers available on the HP page, even downloaded those newer Intel (chipset) etc.

  Is there a solution to this? Has anyone else encountered this problem?

  Windows 7 is officially released and available in RTM version, not beta, so I think that HP should open support in his favor and release new drivers for win7! And above all, to solve this problem...

  If anyone is interested, this problem is solved now.

  Just download the new drivers from http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & cc = us & prodTypeId = 321957 & prodSeriesId = 3744188 & swItem = ob-76187-1 & mode = 4 & idx = 2, install and make sure you have the latest version of the BIOS. Tested - heads are being finally parked! Yay!

• Envy of HP Touch Smart 17: HP Mobile Data Protection sensor missing in Device Manager

  I had a HP 3D drive guard error after installing drivers of devices in Device Manager in the control panel.  I looked on Google for answers and they said to find the right driver on the HP website, sp71811, uninstall the old drivers and install a new one for this laptop.  I did this and got an error DLL missing after restarting the machine.  You told me to uninstall again and reinstall and do not forget to restart after uninstalling.  The installation said it was incomplete, that the files were not completely installed.  I got an error message about a missing .dll file (don't have the error code now).  Something about a file stack error.  I went to the Device Manager and uninstalled the driver for the HP mobile data protection thinking can I reinsall that Device Manager but he removed the accelerometer.  Now I can't download HP 3D DG due to missing accelerometer.  How can I retrieve the accelerometer and the original problem with HP DG 3D?

  Hello:

  Try the latest version of the 3D driveguard driver...

  This package provides the software HP 3D DriveGuard to the notebook models that are running a supported operating system. HP 3D DriveGuard software protects the drive hard by parking the heads if cell phone accidentally falls, or is suddenly struck by another object.

  FTP://ftp.HP.com/pub/SoftPaq/sp75501-76000/sp75979.exe

• Windows 7 hangs after reboot (after "Sensor HP Mobile Data Protection" updated)

  My Windows 7 Home Premium hangs (blue screen) to the 'Starting Windows' screen after reboot. And the reason for the rebate to zero (and crash) is updated to Windows "HP Mobile Data Protection Sensor" . I did hidden, but now I need to install drivers for my webcam and every time that I turn on "automatic driver installation" update of windows server, it installs not only the WebCam drivers, but also this «HP Mobile Data Protection Sensor» update Which brings me to the crash at the next restart of Windows. The only way is to return to the system restore point.

  I use a laptop "HP Compaq 6715 b" . I had Vista prior to this (it was preinstalled with HP all the "stuff"), but after upgrade (reinstallation) of windows 7, upgrading from windows found all the drivers (and graphics and sound and even the biometric device drivers), but is now something wrong after every update "HP Mobile Data Protection Sensor" . Why? Or at least I can make him 'banned '?

  P.S. I had and have the 32-bit version of Windows.

  ny6uctblu,
  Have you checked with HP on any problems with this software?  Here is a link for download of HP for the software.  You should also check that your BIOS is up to date.  I found some info on a wire of HP on the Data Protection sensor Mobile works is not propely.  This thread can also give you some other ideas.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• -Pop-up notifications (mobile data and system update)

  Hello.
  I am having some problems with the pop-up notifications. I'm on a prepaid monthly plan and sometimes my mobile data is not 'free' which means that I have fresh when I turn it on. Before I had a pop-up notification whenever I try to enable mobile data, attention that this may have costs. For some people, it's pretty boring, but for me it was perfect because it would be a protection for all the times I have turn on mobile data by mistake. Now this pop up shows no more. I think I should have clicked the "do not show this new 'option." Does anyone know how to get it back?
  The other thing is to know how to get permanently rid of notification of update of the system. I don't want 5.1.1 as the battery life is a little ridiculous that this notification is always coming from time to time. I clear the "software update" application cache and it will, but always comes back after restart.
  Thank you

  Hello

  I think you can get the pop-up notification for mobile data if you go to settings > Apps > the 'All' tab > phone > clear data. Note that you could have two of the phone app then erase the data for each group and then restart the phone.

  About the software update notification, I don't think that you can completely remove it unfortunately. He always appears after reboot.

• Data protection Dell 'Exception thrown (RN:01 A 00002).

  Latitude E6520 Windows 7 64-bit new installation, installed Dell Data Protection, activated the function of encryption and it did not work for a few days.

  Today, I tried to start it to the top and 'Exception thrown (RN:01 A 00002)' after clicking 'Ok', I'm in disaster recovery mode.

  I entered my password and it says it is invalid. I even checked my backup password on my USB key (it requires you to create) and verified that my password IS correct.

  Now, I have a Samsung Evo 850 SSD that is "Self encrypting" feature enabled so that I can't erase the disc to reuse.

  I tried in Ubuntu, Diskpart everything.

  Any thoughts?

  Hello Speedstep and someone another reading in the future after this gets indexed.

  SpeedStep, while I thank you for your quick response, it is wildly inaccurate.

  Access to Data Protection from Dell use a company called 'Wave', which creates a lot of software suites of different security (ie the Embassey security).

  They have an article here:
  

  After talking to a person about the error, this happens when their software is used on a player not yet taken in charge by them or a corruption of software glitch/player. I found that, in my case, it was because their use TCG OPAL orders 1.0 while my Player supports 2.0 commands more recent.

  This caused my problem. -How do I fix this?

  I found a few blackhat tools that allow you to communicate to the piece of independent encryption of drives, but they were not successful. After some research, there is a hardware password PSID on the SSD. I found that someone has added to their Samsungs PSID reset tool drop-down list.

  Run this tool CLI enabled me to the SSDS to factory specifications and remove independent encryption caused by the DDPA.  Yay! Now, I have my SSD back.

  SpeedStep, I replace my SSD with another and I was able to use it successfully without any changes to my TPM secure or Bios. Again once, however I appreciate the quick response!

  If anyone needs the tool to reset Samsung PSID, feel free to just post below and we will get in touch.

• No Protection for drive "D" should be on? How do I do that?

  I just accidentally discovered that the Protection settings for my Windows 7 Pro show that 'C' protection is enabled but "D" protection is disabled.

  Don't know how or why my computer is built that way.  I think that the "D" drive is a partition - but still uncertain (obviously I'm not a technician, not a programmer or hardware expert).

  I use drive D and for everything I do on my computer - all the time.  I only use the C drive to organize real programs.

  No Protection for drive "D" should be on?  How do I do that?

  Thank you

  Original title: the System Protection - settings

  Well, this is what happens when the assumptions in order to give a quicker response.

  If the partition D: is something you created and use it to store your data, then go ahead and turn on the System Protection.  For this data partition, consider Protection of the system configuration to save only the "previous versions".  See Fig. 2 here--> http://programming4.us/desktop/1368.aspx

  If I were you, however, I would seriously consider using some external media for backup - a network drive, a connected USB drive and/or storage Internet 'cloud' - in addition to turning on the system of Protection.

  Protection of the system creates "Restore Points" on the same partition that it protects.  If the problem is that you delete an important file by mistake, or if it gets corrupted somehow, then having a "previous version" available on the same drive is very convenient.  But what happens when all of the disk fails (hard drives fail, some more often than others)?  If the Protection system is your only backup, you end up with nothing.  If you are a digital artist, and these files are related to work, do not rely on the Protection of the system.

• Unable to connect to mobile data iPad mini

  

  mini iPad cannot connect to mobile data, after touch setting, only aircraft, wifi and Bluetooth icon will appear. After that it's notifications. Already insert the sim card and no support written at the top left. He comes to write iPad with wifi signal. My mini iPad model is md543zpa

  Hello. Have you tried to restart from the insertion of the SIM card? Hold down the sleep and home buttons until you see the Apple.

• No mobile data

  Hi all, my 5s iphone works fine for voice calls and wifi but I can not use mobile data. 4g appears and with good resistance.

  I checked the supplier and all is ok, had installed a new sim card, soft reboot, hard reboot as a new phone but still no mobile data. advice will be greatly appreciated

  If it is enabled in

  Settings-> mobile data?

• Deactivation of mobile data in flight mode.

  Hello.

  I have an iPhone with iOS 9.3.1 6 and I try to turn off mobile data when the phone is in flight mode or with the SIM card removed. No idea how to do it?

  Kind regards

  There is nothing to turn off.  If the device is in airplane mode, all the radio are switched off voltage, therefore no data or voice at all connections.  Similarly, if you remove the SIM card, it cannot be any cellular connection at all, so nothing to turn off in what concerns cellular data (or voice).  With the SIM card, wifi could still be used if there is a network in range.  But with wifi off and the SIM card on, once again, there is no possible connection data of any kind.

• When I send a text message and mobile data are off, it is not given, but I do not see this message for a few minutes. I can then refer using "send as a text message. How can I 'send as a text message' in the first place?

  When I send a text message and mobile data are off, it is not given, but I do not see this message for a few minutes. I can then refer using "send as a text message. How can I 'send as a text message' in the first place?

  Disable the iMessage?

• Will you be able to put Mobile Data Switch ON or OFF option in the shortcut bar.

  Hey Apple team of Directors,

  Nice day. IAM a () and iPhone user since Iam using Apple iPhone 6 and 6 s of 2010 go, I have a small suggestion to do an install IOS mentioned below,

  If you can bring MOBILE DATA SWITCH ON / OFF option of shortcut bar, then it will be very useful for all the iPhone users. Could you please take my kind request to the extra level for the activation of this option.

  Thank you.

  Best regards;

  Mithun *.

  < personal information under the direction of the host >

  Hello! logic you s! How can you turn on a device if it is off with the shortcut bar? It is not possible! turn off the only is possible

• iPhone 5 battery runs very quickly when using mobile data

  When I use mobile data on my iPhone 5, the battery seems to run out quickly. When I say fast, I mean very quickly, it will drop 100% completely dead in 20 minutes. What I do when I use mobile data is send some Snapchats and that's all. I left mobile data on, I have it on when I need to use it. I tried using mobile data for other things, and the same thing happens. Sometimes the phone will completely die to about 40% of the battery being left. I am almost convinced that I need at this point a new battery for my phone. Finally, I want to mention that these problems don't happen when you use mobile data, WiFi. Does anyone have any suggestions?

  iOS: version 9.0.2

  See the following article:

  https://www.Apple.com/support/iPhone5-battery/

  In addition, download the app from the battery life and see what it says about the health of your battery.

• Option of mobile data on the control center

  Hello

  I use the WiFi in the office and home and when I go out on the street will use mobile data. Unlike Android OS to iOS, we will have to go into settings to activate mobile data.

  So I thought it would be a great help if we have mobile data option power button turn on the Control Centre, which would help users like me save a few keystrokes whenever pass WiFi Mobile Data.

  I have not found a source to post this suggestion/idea, so let down here.

  Any help to make this idea of joining Apple would be appreciated!

  Thanks in advance...

  You can offer your comments Apple here.

  However, I don't see the advantage or the purpose of what you are suggesting. If the WiFi is enabled, and you have a WiFi connection, applications will not cell phone use. There is no need to turn it off. What you ask is already built into the unit.