Mod 10 down back to 8 and does not pass 7

Can someone move this to the forum of Multisim? I can only put in Circuit Design Suite.

In any case, I have problems with Multisim. I made more complex circuits, but somehow, I lost my memory and cannot remember it clearly. So I go on Digital Electronics 1, I'm ready for Digital Electronics 2.

I am a 15 low meter mod. To happen 15 to 0 easily, but I want him to be 9-0, then the display shows 9, 8, 7, 6, 5, 4, 3, 2, 1, 0 and 'LOAD' then 9 and countdown again.

Without the charge, he would go 15 - 0 and reset.

So in class, we learned at 15 (1 1 1 1) NAND to load presets ABCD, I used a switch is customizable. I use 1001 for 9-0, but he is always put back to zero (load) to 7... So there are 9, 8, 9, 8, 9, 8, 9, 8 and so on.

It will count down to 0 and go back to 15, but at 15 he flip 1111 to a low and will activate the load and given to 9. I can't get it past 8. I can move the ABCD to 6, and it works perfectly. It will go from 6 to 0 and then load back to 6 and repeat. When I try from 9 to 0, it just will not work.

Any idea? Someone asked me (since I took the Multisim from Digital Electronics 1 section and he took the model section) if it must use the DIP switches and how the teacher said no cause of bounceback? She also told my partner to use only one... but I don't remember if it was instead of the clock, OR switches. I see people on Multisim using buttons instead of my switch. What is the problem?

In addition, my display 7 segments will not work correctly.

So, my teacher asked me what was the model number for the NAND and I didn't.

She told me to Google the model number and then use in Multisim.

I've done that I have placed a NAND4 - not a 7420N.

I knew that the NAND dirtied with the count of 9-0. So, we replaced by a 7420N and there are now 9-0.

To display, I did it properly and did so my classmates - but the default is 7446 somehow does not work and shows the numbers in front of what he has. So ONE looks like a three backward, because it lights the LED must be off.

So we fixed it by replacing the component with a 7447.

If I would have stuck with my instincts and tried to replace it with a 7447, I would have done this a week ago. However, the document specified using a 7446, LAB so I don't think it was a problem.

To someone else as the question with a MOD 10 countdown with a NAND4, use a 7420N in replacement of the NAND4.

It is fixed.

Tags: NI Software

Similar Questions

  • I can not load down the windows store and does not refresh

    Windows said it fixed the problem but it still won't be updated also I can not down load Windows store, HELP I have no nothing to computing

    Original title: windows update doesn't

    This problem can occur for several reasons such as interruption of the connection between the computer and the Windows Update service, the system files related to Windows Update do not work properly etc. This problem can also occur if the manifest of components (CBS)-based services is corrupted.

    Follow these methods:

    Method 1.


    I suggest you to temporarily disable any third-party antivirus installed on the computer and check the status of update installation.

    Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

    Method 2.


    Start the computer in a clean boot state, and check the status of update. A clean boot to test if any element of service or third party application startup is causing this issue.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7, Windows 8

    : http://support.microsoft.com/kb/929135

    Note: When you are finished troubleshooting, follow the steps under "How to reset the computer to start as usual after a clean boot troubleshooting" in the article to start on normal startup.

    Method 3.


    You can reset Windows Update components, restart the computer and check the status of update installation.

    How to reset the Windows Update components?

    : http://support.microsoft.com/kb/971058/en-us

    Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

    Method 4.


    Rename the Software Distribution folder and verify the installation state of update.

    Follow the steps.

    (a) press "Windows + X" and click/click on "command prompt (Admin).

    (b) open the command prompt window, type these commands one by one, and press ENTER after each command.

    net stop wuauserv

    net stop cryptSvc

    net stop bits

    net stop msiserver

    Ren SoftwareDistribution.old C:\Windows\SoftwareDistribution

    Ren C:\Windows\System32\catroot2 catroot2.old

    net start wuauserv

    net start cryptSvc

    net start bits

    net start msiserver

    (d) wait for the course to complete.

    (e) close the command prompt, and then restart the computer.

    Now, go to Windows Update and try to install the updates. Check if it helps.

    Of reference articles.

    Upgrade to 8.1 Windows: FAQ

    : http://windows.microsoft.com/en-us/windows-8/upgrade-to-windows-8

    Error code 0 x 80073712 occurs in Windows Update or Microsoft Update

    : http://support.microsoft.com/kb/957310/en-us

    Note: When you "Refresh" the applications provided with your PC or you installed on Windows Store will be reinstalled, however, all the apps that you have installed from other websites and the DVD needs be reinstalled as they will be deleted. You will find a list of applications on your desktop after you refresh your PC.

    Response with the State of the question and we will be happy to offer you our help.

  • Dell Vostro 430 sometimes breaks down and does not find the hard drive in the bios

    So I have this old - ish Dell Vostro 430, intel cpu, windows 7 hard disk sata 250 GB, 4 GB of ram.

    Update BIOS to the latest version 2.4.0

    In certain exceptional circumstances, this PC sometimes crashes in windows, it is restarted, and then when he comes back it does not find the hard drive as a gift. He is not seen in the bios and does not start.

    To fix, I have to unplug the power cable, wait a few seconds, plug in, reboot the computer and it starts normally, load windows and everything.

    So far, I have tried to paginate on another hard disk, reinstall the Windows operating system from scratch, and same thing happens from time to time.

    It is difficult to find the cause of the problem, because this happens very rarely.

    Sometimes, when the pc is turned on for the first time in the morning, the hard drive is not found by the bios and we reappear at the same trick (disconnect the power cable) to take him back.

    When it crashes when using inside Windows, it seems that the reason is the computer can't find the hard drive.

    Such computer is out of warranty.

    It would be nice to just throw this computer because it is still fine for the work it has to do, + I have Windows and Office OEM license on it, as well as many other software that I have to reinstall etc.etc.

    No idea what I could troubleshoot?

    Maybe change the motherboard? How can I buy a new motherboard for an out of warranty Dell?

    While possibly keeping all the OEM licenses (Windows 7 and Office 2007).

    Desu
    .. .once in a while...

    That will make hard to resolve this situation.

    • Have you tried to replace the battery in the motherboard, if nothing else than to exclude it? CR2032, 3-volt lithium-ion, ~ $2 at discount stores. Do not forget to open the BIOS Setup and copy down all current settings first because remove battery BIOS resets the default values, which is maybe not correct for your specific system.
    • Have you tried another SATA data cable, or reinstall the existing at both ends?
    • Have you reinstall RAM and PCI card in their slots?
    • Have you used canned air to blow out the dust?
    • Maybe a power supply problem... ? If insufficient voltage, he could not start the HARD drive quite fast at startup, or quick enough after your option settings to be able to turn the HARD drive off when it is not accessed, what may cause this error message 'not found '.
    • If you use a power strip or surge protector, have you deleted and the PC connected directly to a wall jack?

    If it is a motherboard defective and you replace it with another jury of Vostro 430, you shouldn't have any problems with Windows or Office licenses. Assuming you are using Windows Dell reinstall for exact same version of Windows drive that was installed at the factory, it should not even ask the product key, if you must reinstall Windows on the HARD drive. But even if she asks, there should be a sticker somewhere on the PC with your unique product key so you can enter if the installer made the request.

    and make sure you have the Office product key too...

  • printer do not wake off mode 'sleep' and does not turn off when the Start button / stop pressed or pushed.

    HP printer all-in-one B210a win 7 64 bit.

    no error message just don't wake up from power saving mode and does not turn off when the power button is pressed. must be disconnected and then turned back on. works fine until the power saving mode he did go to sleep then not answer the test print command or Toolbox controls.  power saving mode is turned off, but still goes to sleep.

    First, you will need to make sure that the printer is under warranty.  You can do it here.  So, if you are in warranty, you must contact HP at 1-800-474-6836 and the United States in computer science, international users click here.

  • My network password box keeps coming back, and does not deal with e-mail.

    network password box problem

    My network password box keeps coming back and does not deal with e-mail, this just started happening, why

    Hello

    ·         What mail client do you use?

    ·         Were there any changes made on the computer before the show?

    ·         Are you making reference to the box to pop up while accessing an e-mail program like Windows mail or Outlook?

    Please provide us with more information about the issue so that we can help you further:

    If you are facing this problem on Outlook, see this link:

    http://Office.Microsoft.com/en-us/Outlook-help/i-get-an-enter-network-password-prompt-HA010151354.aspx

    Alternatively, you can ask the experts in the forums of Outlook:

    http://answers.Microsoft.com/en-us/Office/Forum/Outlook

  • Photoshop CC 2015 slow and does not work - I want to go back to Photoshop CC 2014

    I am a customer of the creative cloud. Given that I've updated the Photoshop to CC, 2015, a few weeks ago I worked in the worst conditions: the software its sloww now and does not work and I want to go back to the previous version of Photoshop, the CC 2014 which worked very well in my iMac.

    Please, tell me how to download this version and solve the huge problem. Thank you

    Hello

    Please visit the link below to return to the 2014 version.

    http://blogs.Adobe.com/adobecare/2015/06/16/how-to-find-and-install-previous-version-of-ad obe-apps-in-cc-2015.

    Hope this helps!

  • Yoga 2 repetitive pro reboot and does not start

    Turned on my laptop this morning. Worked well. Went to try to use my printer to scan something to my laptop. Printer turned on and came back to my laptop does not. It is just to turn on and off again. The Start button / stop and the keyboard backlight flash just turn off repeatedly.

    Tried searching forums for a solution. Here's what I've tried so far:

    Laptop not connected to the power source

    Battery disconnected

    Disconnected battery CMOS (CR2016)

    Laptop plugged in and still get the same problem of restart

    Ive tried holding down the power button / stop and small button above does not. I also tried holding on to the power supply with battery disconnected and battery connected CMOS. Always the same question: repetitive restart with no boot. Printer has been turned off during the whole process of troubleshooting but worked well with wifes laptop after that mine pooped the bed.

    Anyone got a solution or an idea?

    FYI - took it to a Tech Said motherboard needed replaced. $800 or more.

    Comment to Moderator: Post edited to conform to Community rules.

  • Hanging Windows desktop and does not, online or off the power. I have to use the task mgr constantly to "shake" the windows to startin

    Original title: Hello I have an xp pro sp3 dell dimension 2400. Hanging of Windows desktop and does not, online and off.

    Hello I have an xp pro, sp3, the dell dimension 2400. IE 8 for the internet.  I use McAfee through my SP which is AT & T. Windows Office suspended and does not, online or off the power. I have to use the task mgr constantly to "shake up" windows start and sometimes, it doesn't work anymore and I have to restart.

    I have used all sorts of anti-virus programs and can ensure that it is NOT a virus. It is not my regestry, all updates are current. I keep a clean machine.

    I have xp of the process and have nothing wrong.

    Sometimes my icons will disappear out of my office, but always come right away. Other times, I get a message that says stop running this script. a script on this page slows down IE run slowly. It is for the most part on Face Book, BUT sometimes also on other sites, like google mail. Yahoo mail, groups and news.

    Any suggestions would be greatly appreciated.

    Thank you! :>)

    Hello I have an xp pro, sp3, the dell dimension 2400. IE 8 for the internet.  I use McAfee through my SP which is AT & T. Windows Office suspended and does not, online or off the power. I have to use the task mgr constantly to "shake up" windows start and sometimes, it doesn't work anymore and I have to restart.

    I have used all sorts of anti-virus programs and can ensure that it is NOT a virus. It is not my regestry, all updates are current. I keep a clean machine.

    I have xp of the process and have nothing wrong.

    Sometimes my icons will disappear out of my office, but always come right away. Other times, I get a message that says stop running this script. a script on this page slows down IE run slowly. It is for the most part on Face Book, BUT sometimes also on other sites, like google mail. Yahoo mail, groups and news.

    Any suggestions would be greatly appreciated.

    Thank you! :>)

    The image (it back up to an external drive as full image) and reinstall Windows XP, update, drivers and everything.  Install any plugins that you NEED to do all that you see here that the bat hurt.  If the problem no longer exists, something has gone wrong with your system from before (corrupt files or your cleaning is not as complete as you think) and if the problem persists - probably something to do with the material. In all cases, you can return to the image if you wish.

    To the extent wherever it is the registry, I must ask, * how * you have come to this conclusion?  Not that I'm defending something - I was wondering what you did to decide who is not your registry database?  (Side: I agree with you.)

    That's what * I * would call cleaning and optimization of a Windows XP machine:

    Search for malware:

    Download, install, execute, update and perform analyses complete system with the two following applications:

    Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)

    Search online with eSet Online Scanner.

    The less you have to run all the time, most things you want to run will perform:

    Use Autoruns to understand this all starts when your computer's / when you log in. Look for whatever it is you do not know using Google (or ask here.) You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

    You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory. This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

    Do a house cleaning and the dust of this hard drive:

    You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

    Windows XP should take between 4.5 and 9 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

    If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
    http://www3.TELUS.NET/dandemar/spack.htm
    (Especially of interest here - #4)
    (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

    You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

    How to use disk cleanup
    http://support.Microsoft.com/kb/310312

    You can disable hibernation if it is enabled and you do not...

    When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

    -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
    -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
    -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

    You can control the amount of space your system restore can use...

    1. Click Start, right click my computer and then click Properties.
    2. click on the System Restore tab.
    3. highlight one of your readers (or C: If you only) and click on the button "settings".
    4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
    5. click on OK. Then click OK again.

    You can control the amount of space used may or may not temporary Internet files...

    Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

    -Open a copy of Microsoft Internet Explorer.
    -Select TOOLS - Internet Options.
    -On the general tab in the section 'Temporary Internet files', follow these steps:
    -Click on 'Delete the Cookies' (click OK)
    -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
    -Click OK.
    -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
    -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

    You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

    CCleaner (free!)
    http://www.CCleaner.com/
    (just disk cleanup - do not play with the part of the registry for the moment)

    Other ways to free up space...

    SequoiaView
    http://www.win.Tue.nl/SequoiaView/

    JDiskReport
    http://www.jgoodies.com/freeware/JDiskReport/index.html

    Those who can help you discover visually where all space is used. Then, you can determine what to do.

    After that - you want to check any physical errors and fix everything for efficient access"

    CHKDSK
    How to scan your disks for errors* will take time and a reboot.

    Defragment
    How to defragment your hard drives* will take time

    Cleaning the components of update on your Windows XP computer

    While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need. This will help you ensure that your system update is ready to do it for you.

    Download and run the MSRT tool manually:
    http://www.Microsoft.com/security/malwareremove/default.mspx
    (Ignore the details and download the tool to download and save to your desktop, run it.)

    Reset.

    Download/install the latest program Windows installation (for your operating system):
    (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
    (Download and save it to your desktop, run it.)

    Reset.

    and...

    Download the latest version of Windows Update (x 86) agent here:
    http://go.Microsoft.com/fwlink/?LinkId=91237
    ... and save it to the root of your C:\ drive. After you register on theroot of the C:\ drive, follow these steps:

    Close all Internet Explorer Windows and other applications.

    AutoScan--> RUN and type:
    %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
    --> Click OK.

    (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

    Reset.

    Now reset your Windows with this FixIt components update:
    How to reset the Windows Update components?

    Reset.

    Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing youpouvez wish to make:

    Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

    If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end. This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.

  • DELL Inspiron N5110 does not stop and does not wake from sleep

    Hello.

    I have Dell Inspiron N5110, who cannot stop it in Windows 7 or Ubuntu Linux. Specifically, I started Ubuntu Live from CD to eliminate the possibility that the problem is in Windows 7. Stop in Ubuntu does not work either. This proves that the reason for not an application in Windows that remains suspended and does not allow the laptop to close.

    The laptop computer may not wake after sleep or either Hibernate.

    I tried all the solutions that advised you to all the other people in the forum who have the same problem.

    1. the laptop cannot stop mode safe either.

    2 may not stop even after clean boot Mode - all services disabled and all package disabled Startups.

    3. I haven't tried to change the Power Options Advanced "Allow hybrid sleep" - both WE "On AC Power" and "Battery operated" - no change.

    4. I tried to install the latest NVIDIA video drivers. This did not help either.

    5 running only on battery change nothing - not cannot always stop.

    6 race only on AC adapter without battery - still cannot stop.

    7. I tried to remove the AC adapter and the battery, and now the POWER button for 30 seconds to RESET the phone - did not work.

    ATTENTION: I have read your forums all day and has seen at least 10-15 reports on the same problem, and not a single case fixed.

    8. This is why I have not tried Flash the BIOS with the latest version - I have read other people who have tried and it didn't work either.

    9. I loaded the BIOS default settings (F9) - stop still can't.

    NOTE: Change something in the BIOS and getting out once caused the laptop to freeze and I had to power off by holding button for a longer time.

    10. I ran DELL Diagnostics menu Boot (F12 at startup) - no error found.

    11. I couldn't find IEEE 1394 adapter in Device Manager to change the power management settings.

    In fact, none of the suggestions that you can give to change something in Windows is logical because I already mentioned that stop in Ubuntu does not work or the other.

    The question seems to be either in BIOS or a hardware problem. But which component? This is the CD/DVD drive?

    It is a new laptop.

    Please advice how to proceed. If you know which component fails please tell me.

    Remove the keyboard and palmrest (dell guide shows you how) and you should see a small button battery. Remove it at least 10 seconds, then put back. Enter the BIOS and make sure that there is nothing weird was changed. It should work fine now. I had this work in Ubuntu 12.04 these last days with no problems.

  • I have a mac / downloaded adobe reader and does not accept the license agreement for end

    I have a mac / downloaded adobe reader and does not accept the license agreement for end.  It says successfully downloaded.  I'm going to use it and it won't work.  Told to close.  I opened adobe reader software and brings me back to install which I knocked again, and he says already installed.

    I closed out of all tabs, went to "safari" in the top of the page, clicked on close safari.  I clicked on Go, and then click applications, then I found adobe down and clicked on it.  then he gave me a place to click on accept.  I hope it works!

  • When the Active Server is shut down normally, the passive server does not start the service

    Hi friends,

    I have a question for the vCenter heartbeat,

    When the Active Server is shut down normally, the passive server does not start the service.

    Is this normal?

    Thank you.

    He starts the services on the passive server because the correct judgment still leaves the server active as being the "main".

    Stop all services of it properly. And after it comes back online replication starts as before, so that no service must be started on both servers. (in this case that you will have questions)

    Please note that on a server computer, you have 2 possibilities to "stopping down": the BONE and the option of status and control of the server Vcenter Heartbeat

    See you soon!

  • My charger Apple Watch emits a ticking sound and does not load?

    The round magnetic disc at the end of my charging cable is a "ticking" or clicking sound which seems to be the rhythm of a clock. He has recently begun and did not charge the watch. I tried to connect the cable to the USB port on the MacBook Pro rather than on the wall, but still, he clicks on and does not load. Is my favorite charger?

    Hello

    I suggest you contact Apple Support (mail service may be available) or make a Genius Bar reservation in one goal of your Apple Watch and cable magnetic charge verified and, if recommended by Apple, repaired / replaced (whether under warranty, if it qualifies, or via the chargeable repair service):

    To check your warranty status (the serial number is on the back of your watch):

  • iPhone 7 more - Siri iOS10 not work and does not

    I received my iPhone 7 Plus 3 days ago and tried to set up "Hey Siri". In the process, I noticed that Siri was insensitive and does not work.

    I did some troubleshooting and started with the reset, restore, turned dictation & Siri/off voltage (before and after reboot) and still no response from Siri.

    I proceeded to remove the hardware problem by making a call and speaking directly into the microphone with high and low height during a call. Nobody who assists heard both high and low perfectly. I only tested the microphone with voice memo and the microphone worked fine.

    Called customer service on speaker (which call was working properly) but they were unable to provide a response, rep said she would follow with me Wednesday.

    I press the home button, Siri will appear with the wavelength and as soon as I said a word Siri States "I didn't understand" and rest wavelength normal. I don't know if there is a problem with my phone or iOS10, but if someone has an answer or has the same issue please chime. Thank you!

    iOS 10, when using Siri, you hold DOWN the home button while talking with Siri.  Release the button when you are finished speaking.

    Best,

    GDG

  • Why hide my taskbar and does not come backwhenever I open firefox and other files?

    Whenever I open firefox, the taskbar is hidden and does not come even if I place my cursor there. This happens to all my files as well. What is the solution for this?

    I called the big players to help you. Good luck.

    You have Firefox in full window mode?

  • Satellite U305-S7432 freezes and does not sometimes using Win XP

    Hello.

    I have a portable Satellite U305-S7432.
    Initially, it came with Vista, but I reformatted with XP Pro. I have installed all updates up to service pack 3.

    My problem is that sometimes when I try to restart the computer, simply, it freezes and does not meet any entry. I noticed that this happens if I close and then open the cover (which means that the computer goes mode sleep entry and returns).

    Please note that the splash screen works perfectly well and the computer wakes from sleep fine but then when I try to restart, the computer will simply spend time instead of restart.

    If it goes into sleep mode, reboot takes place as planned.

    I installed all the drivers and there is no question mark in Device Manager. I've updated the latest chipset from Intel (for the mobile 965) driver as well. Finally, I also tried to add /forceresetreg my Boot.ini file (as suggested: http://support.microsoft.com/kb/822624) but nothing helps.

    Any ideas?

    It is a series of laptop computers Toshiba us and you should check the Toshiba driver page for available drivers:
    http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_sc_home.jsp

    If you will not find XP drivers for this page, then you can try to install unique drivers for Sat U300 since European Toshiba page but I not quite sure if these drivers XP will work on you Sat U305 Mr. but it s worth a try!

    Good luck

Maybe you are looking for

  • Why Firefox blocks install_flashplayer 16x32_mssa_aaa_aih .exe (1)

    I get the video messages are not visible because I need Flash Player to date. When I try to install and run, I get the message that Firefox crashes. How to bring back my videos?

  • Finder raises even after forcing them to leave

    On a MacBook Pro retina in early 2013, Mavericks 10.9.5, every time I try to restart the finder, it seems to stop smoking (icons all disappear without bar menus most in finder, app works is not in the activity monitor does not show in menu force quit

  • Network controller does not

    I tried 10 different drivers but my network controller and device PCI is still not functional my ID is: PCI\VEN_168C & DEV_0036 & SUBSYS_217F103C & REV_01PCI\VEN_168C & DEV_0036 & SUBSYS_217F103CPCI\VEN_168C & DEV_0036 & CC_028000PCI\VEN_168C & DEV_0

  • Y at - it a copy of the ISO of Windows XP Professional?

    I will use the FULL copy of the ISO of Windows XP Professional for 30 days on VMware Workstation, but I click "Let me save and activate Windows.

  • Some sites are struggling to load on WINDOWS XP system...

    But I don't think it's a matter of IE8. There are a few sites that seem to take forever to load on my Windows XP HOME system in my home office with SP3. . before posting this question I did research and wrong and came to the conclusion isn't an IE8 s