model 550-223w: cannot download the recovery media after upgrade Windows 8.1 for Windows 10

Similar Questions

• Reinstalled Windows XP HOME SP2 and cannot download the appropriate components to upgrade my software to SP3! Suggestions?

  Reinstalled Windows XP HOME SP2 and cannot download the appropriate components to upgrade my software to SP3! Suggestions? It seems that microsoft Web sites send me in circles. Patches do not work either.

  Hello
   
  1. What is the error code / message that displayed when you try to install updates for your Windows Xp Service pack 2 computer?
   
  2. What are the steps of troubleshooting that you already tried?
   
  Please follow the links below to solve the problem.
   
  Method 1
   
  Step 1
   
  Steps to take before you install Windows XP Service Pack 3
   
  http://support.Microsoft.com/kb/950717
   
  Step 2
   
  Cannot install Windows updates
   
  http://support.Microsoft.com/kb/555461
   
  see, http://support.microsoft.com/kb/906602
   
  Method 2
   
  If you still face problems, please start your computer in a clean boot to avoid conflicts with security and third-party software conflicts and try to install updates.
   
  How to configure Windows XP to start in a "clean boot" State
  
  http://support.Microsoft.com/kb/929135
   
  Note: Follow the steps to configure Windows to use a normal startup state of the article mentioned above to start the computer in normal startup when you have completed the necessary troubleshooting.
   
  I hope this helps.

• Creation of recovery media after upgrade to 8.1 Windows

  My computer is a year old and came with 64 bit Windows 8 Pro. I did my recovery media.  Then, they offered an upgrade to a 8.1 free Pro 64-bit.  I took this.  You cannot use the recovery media HP App again to make a floppy of 8.1.  I went online to try to do and could do it, but I only have my OEM # put in and who doesn't.  Download not free any # is product key came with version 8.1.  I tried to use the product key provided with your computer, Windows 8, and it did not work.   How can you now create recovery media for the free Windows 8.1 that has no new product key?  I can retrieve only to Windows 8.  How worthless is that?

  Hi sandnurse,

  You are absolutely right.

  Microsoft will not allow the creation of a Win 8.1 installation disc using a product key to win 8.

  You can buy a disc installation Win 8.1 OEM or retail.

  Jaco

• T430s and create recovery media after upgrade to win 8 Win 7

  Is it possible to create a recovery media after upgrade to Windows 8 of a factory installed Windows 7?

  You do before the upgrade.
  NO.

• Satellite Pro A200-16N: can I use the recovery CD after upgrade to Vista

  HII!

  IM thinking of upgrading to windows vista on my Satellite Pro A200-16N and I ran the pre-upgrade of windows vista from microsoft website and it says that my system will be in charge of windows vista so im ok about it.

  The problem is that if my laptop was to break or something like that at some point, will my recovery CD provided by toshiba to work always on the laptop with windows vista?
  They will return the laptop for windows xp or from my laptop has another operating system they will not work?

  Also...
  What's the deal with BIOS? : S
  I don't understand!
  If I were to upgrade to windows vista should I upgrade my BIOS before or after the upgrade to vista?
  As I download the new drivers before upgrading Yes?

  Thank you!

  The restore CD will of course work.
  The recovery CD will always set the laptop back to the factory settings. This means that the whole HARD drive will be formatted and the image of Toshiba will be installed.

  > What's the deal with BIOS? I put t understand!
  > If I were to upgrade to windows vista should I upgrade my BIOS before or after the upgrade to vista?
  To my knowledge, that this laptop was already shipped with Vista, so you need not update the BIOS if you want to reinstall Vista.

  Some series Satellite A200 needs a BIOS update if you want to use the XP.
  In such cases, it s advisable to upgrade the BIOS to version XP first, then install OS X.

  Best regards

• Stream7 create a recovery media after upgrade to win10

  unboxed my stream7 a few days earlier and let it update and got the 'time to get win10' icon in the systray.  I created win8.1 media restoration until I take the not... so I can go back to a clean win8... because I have now about free 3.5gig after the upgrade on mem drive.  (it's why I want create recovery win10 media... I have none left of disk space!)

  In any case, when I try to create a restoration of win10 disc... I select the check box for the system files and it works a little butthen I get this cryptic message on the screen and a button 'Finish'... but no recovery drive.  If I do not select the system files, it will erase the disk and copy data to it, but this isn't a recovery disk... There is no need to re install win10.  This is win8.1bing, so I can't use the creator of media 10 victory as I have no key... I have to use the recovery media.

  any ideas?  I really like win10, but I need my space rear disc and I want to get rid of all the win8.1 on the driv cruft.

  Thank you.

  To answer my own post... Apparently, simply wait 12 hours. (He was not an update, at least I think... I got the auto update service stopped and the Tablet off all night)
  
  When I tried again this morning... It took about 2 hours, but he had completed the restoration of the road. Another 2 hours and it increased by win10 running, but the screen would not rotate automatically. The fix for that float around these forums. Basically you reinstall the driver win8.1 for HP accelerometer. And boom, in fact.

• creating recovery media after upgrade to 8.1 window

  Hello friends. I have a lot of confusion. I bought a laptop on December 2012 with window 8 preinstalled and created the recovery media about 6 or 7 months later. And now, I upgraded my system to window the window store 8.1. And now again I would create a recovery media for windows 8.1. So my question is if I create recovery media on a flash drive usb and if in the future I want to reset my pc or reinstall my system, I'll make window 8 or 8.1 on my system. I'm not a computer expert. If anyone can help me please. Thank you.

  Hello:

  You will get Windows 8.

  If you want to do a recovery W8.1 image you can do the following...

  You can create a system image in W8.1 and save it on a portable hard drive or set of DVD as you might in W7.

  Instead of making a bootable cd as in W7, you need a boot flash drive boot. You can use a flash drive to very small capacity (256 MB) for the startup recovery W8 flash player.

  Check out these links for more information.

  Create the image of the W8.1 system:

  http://www.hanselman.com/blog/CreateACompleteSystemImageBackupWithWindows81AndFileHistory.aspx

  Create bootable W8.1 flash player to access the system image.  Don't forget, you can use this drive, you can boot from it and access the system image you created on DVD or a portable USB hard drive.

  http://anewdomain.NET/2013/09/13/create-USB-recovery-drive-Windows-8-1/

• PC cannot read the recovery media

  Hello, I am from new delhi, India. I bought a pc with Windows Vista pre-installed 32-bit Home Basic edition to the HCL House in June 2007.

  I bought a pc with Windows Vista pre-installed 32-bit Home Basic edition to the HCL House in June 2007. Today, I tried to format my C: drive with the disk external recovery media that came with my PC. but my PC can't read this disc! It can read other CD and DVD. I need some help on this!

  Hello

  You dΘmarrez shape the recovery disk?

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

• Cannot use the recovery function after an Installalation of Windows 7

  Hello

  I installed Windows 7 on my laptop.

  HP Pavilion dv5 1110eg

  After that, I tried to remove it with the recovery tool (don't ask my why).

  But when I want to start the Recovery Manager (esc-> F11) his boot to Windows instead of the backup Partition.

  I read Acsess thrue Linux-Live DVD but I can't launch the backup Partition!

  I formatted my main partition in the hope that loads of Bios, the recovery Partition, but it didn't.

  So my mommentary Situation is:

  -No operating system

  -No Acsess to the recovery feature

  Could someone help me?

  Edit:

  I forgot to say, that I did not have a recovery CD, because I baught the laptop on E - Bay and the last owner burned one of the 2 discs already. And I had no Chance to burn the first CD...

  HRM

  Message edited by HRM on 26/09/2009 11:01

  If you still work partition recovery, try to do as the active partition, I hope it works always.

  You can search for linux or tools BACK activate or install the Win7 folder in C and then use computer management do D (recovery partition) active rebort, without pressing F11, it doesn't automatically run a system recovery.

  Choose the setting that is installed at the factory and wait until she finished. As soon as it's over, make your own recovery discs.

• Cannot complete the recovery process after replacing HARD drive

  Hello

  I changed my hard drive it for 15 days because he showed abnormalities, so I bought a new hard drive Seagate Western brand with the same technical characteristics as the existing hard drive (product for the product).

  I was then on TOSHIBA HDD RECOVERY to burn to CD system recovery disks, then I went to replace the hard drive.

  After the change, I raised my PC with system restore CD.
  The procedure is successfully completed and orders of comments asking me to remove the disk and restart the PC.

  I raise the PC, everything goes well, launch windows, installation of perfect records system then comes the stage of installation and settings of the system here after the error message:

  "Windows Setup could not configure Windows to run on the hardware in the computer."

  Then it asks me to restart, then it comes back every time on this message, I'm stuck on this step.
  I tried to change the mode of the disc source hard 'compatibility' instead of 'AHCI' but it's even worse, it completely without error buggy.

  Please give me an explanation of this phenomenon.

  Sincerely.

  Guillaume

  Have you tried to repeat the whole recovery procedure?
  If this is not the case, do.

  I recommend to format the whole HARD drive and create an NTFS partition.
  Then start the laptop using the Toshiba Recovery disk and start the recovery procedure.

  I read about the problem of disk HARD similar in the past and especially NFS partition creation has helped to solve these problems.

• Generation of recovery media after changing Windows 8 for Windows 8.1

  How can I create new media recovery on the 8.1 of Windows after changing Windows 8? HP support says that only 1 set of recovery media is allowed. My original game is to Windows 8. You want to avoid having to go through the lengthy procedure of update in case I need to go through the process of recovery with my original support recovery.

  Hi @john_f_g ,

  Thank you for visiting the Forums HP's Support and welcome. I looked into your problem on your HP laptop and needing to make a new copy of Windows 8.1.

  Software recovery of HP and Microsoft allows you to make only a backup recovery.

  You can order new media disc or USB flash device of here.

  Thank you.

• 500 - 81ea: create recovery media after upgrade to windows 10

  I created a USB recovery when I used my PC (using the 8.1 window)

  I had a time to use it to perform a destructive restore but then had to wait for all the upgrades automatically install to get me back to where I was and of course all my other software such as iTunes and music, photos, etc.  Checking to see if I can upgrade to windows 10 I was informed that my windows was not up to date and that I didn't know the logo windows at the bottom right of the screen. I have now been in the screen of windows update and installed quite a few updates and now have the upgrade of windows application.  My question is if I upgrade to windows 10 and then must perform a full recovery can I do new media of recovery or I'll have to go back to windows 8.1 using my existing media and then updateHP software and windows 8.1 and upgrade to windows 10 and the free update will be always available or is there a way I can create new media recovery to allow me to recover Windows 10 OR an altrnative goes back to the creation of a backup drive on an external hard drive and a way to get this image on my HDD internal. OR to simply stick with windows 8.1 and hope, that it is taken in charge as long as XP was.

  THANKS IN ADVANCE FOR ANY HELP

  JIMBO

  Hello

  First things first. Don't forget that your USB stick recovery is the HP external recovery media and not just another type of recovery image. Back up your data. Check that your PC is supported by HP for Windows 10 and that your PC meets the requirements of Windows 10. If so, then be sure your Windows 8.1 system is fully patched and up-to-date with Windows and HP implemented to date.  When you make an in place upgrade W10, W10 process will have a roll back feature that will be available in case you are not happy with the W10.  I made a couple of back roller and the process was pretty quick.

• Back to the recovery partition after installing Windows 10

  Trying without much success to help a friend with a Lenovo ideacentre B310.

  He had apparently been does not work properly under its native operating system Windows 7 and the owner has tried the free update of Windows 10. The cmnputer has not since then start beyond the blue logo of the Windows 10 flag.

  I tried a reset by using the F11 key which got through the whole process of restoration and reinstallation of probably Windows 10 but then frozen 100%.

  I have since installed successfully from a WIN Pro 10 CD, but it's understandable without a free license has been applied as it was a clean install.

  What I want to know, it's the recovery on the still Partition PC contains the original OS? If this how I start and recover to factory condition of the PC having in mind that the PC is currently the trial version of WIN 10 with a limited number of days of use before a product key must be purchased.

  Data loss is not a problem, I just need to go back to factory State and then move on from that.

  Problem all sorted. I didn't realize that you could install the applicable version of REMPORTER 10 of the tool of creation of media these days and use the product key from the COA of WIN 7.

  I'm assuming that I come back to a working version of WIN 7 before I could then upgrade to a licensed version of WIN 10.

  Thanks for all the help.

• HP 450-011: delete the recovery partition after upgrade to win 10?

  I have a new HP 450-011 and it came with Win 8.1 and the recovery with the letter D: drive partition.  I did the upgrade to windows 10.  I made a set of recovery DVD for win installation 8.1.  Is there a reason for me not to delete the D: drive and replace it with my information?  I seriously doubt I'll want to roll back to 8.1 Win.

  Greetings,

  Have you tested the Win 8.1 HP Recovery disks before installing Win 10?

  A question is: If you need technical assistance from HP tech for a possible hardware problem. HP normally requires that the factory installed operating system to take in charge. This policy of HP may have changed during the upgrade to win 10. I do not suspect.

  You can export the recovery, Partition because it will not work now in any case.

  But you need a way to go back to win 8.1 when you need HP warranty support.

  Since you have already upgraded to Win 10, the only way to check the recovery of 8.1 Win disks is to use them and start all over again. Or the support of disks/USB recovery HP Win 8.1 on a new equivalent or larger HDD or SSD. A good installation means that you have now the factory install on this disk.

  It's a lot of work.

  The problem of guaranteed support is your problem.

  I have eliminated this problem by installing Win 10 on a new SSD. I have HP Win 8.1 on a separate SSD and win 10 on a different SSD. Possible guarantee problem solution means earn 8.1 running on HP SSD factory to check the problem of winning 10 SSD.

  Hemdani

• Cannot access the CDrive folder after upgrade to Windows 8

  * Original title: that I can not access the CDrive on my desk

  My PC has recently been upgraded to windows 8. We use dropbox to store our files and of course to have a copy of these files on the CDrive. When I send an email (using gmail) I can't find the files copied on CDrive and Dropbox when I try to join from there, the message is "this file is 0bytes and must not be attached.

  Hello Rea,

   
  1. did you reformat your hard drive during installation?
  (2) you are able to locate the file directly from the c: drive and check the size of the file?

  (3) when did save the file to the c: drive, it was post upgrade of Windows 8 or before upgrade (was it already existing in the previous operating system)?

  If you do not format the hard drive and put in your Windows 8 operating system level, then the Windows.old folder would be created where all the old operating system files would be stored. I suggest you try the procedure described in the article and see if it helps.

  
  How to recover files from the Windows.old folder
  http://Windows.Microsoft.com/en-us/Windows-8/restore-files-upgrade-Windows-old
  
  Unable to download Dropbox question contact the forum Dropbox files for.
   
  Dropbox forums"Bugs & troubleshooting
  https://forums.dropbox.com/topic.php?id=117401
   
  Hope this information can help, just reply to the State of the question for any other help.