Model Aspire 6530 Acer ZK3 HELP me please! eRecovery and black screen

Similar Questions

• Help me please download and install Flash Player!

  One day, I had no problems display Flash on my computer. Then one day last week, he told me that I had to download Flash Player 8 to view the vine on E! Online. I was not able to download Flash Player 8 or 9. Or anything on this site, by the way.
  
  I went here ( http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash & promoi d = BIOW), you click Download. Clicking on the yellow strip that appears to install the Active X control or whatever it is called. A pop-up asked if I wanted to install or are not installed. I clicked on install, then nothing happens. No download box shows up or anything.
  I uninstalled my flash drive (if I even had one) and we tried so many times to download a new flash player.
  
  Help, please!

  Ive downloaded the exe on my server, so go here and save it to your computer, unzip the file and run the program.

• Alienware m15x doesn't start, then tried num, caps and scroll lock are flashing together and black screen. Help, please!

  My former of alienware m15x has worked for a long time and recently a program I was running in order to respond and did not close so I shut down my computer and went to look for a snack or something, I'm back with her already turned on but I never turned it on and everything worked out of the screen, it was black and white , but I was actually on the logon screen, do what most people would of done, I rebooted my laptop this time stay in front of her and to my surprise, something that has never happened before, the laptop has attempted to start, the sound of the startup sound knew no more, sounded different and then he moved slowly This has never happened before, and out of nowhere, the 3 locks lights were flashing, at first I thought it was normal until I did some research and discovered it means something, that concerns me a lot, my lights flashed in a sequence of all 3 locks at the same time, so big all the lock 3 lights were flashing at the same time all together. Anyway I tried some things, but none worked, advice? I would really like to help, oh, and there is no warranty left. in any case who all read this thank you very much.

  We're actually after looking into it more and try things, something worked, all I had to do was take off the rear housing of the laptop (even if it is off) and take small battery out for about 5 to 10 minutes, put it back in then it clogs and hope for the best, luckily for me it worked. My dad previously owned the laptop and when he bought it was broken (motherboard) and when he was broken it does exactly the thing mine did recently, maybe his old motherboard just needs a reset of the bios (removal of the battery for a while). anyway thanks for the advice and help. :)

• BlackBerry smartphones HELP me please bbm and phone carriers

  What mobile operators should you get bbm on a plan to pay as you go (PAYG)?

  Yes, why don't reduce you it to a single nation for us.

  If you are now on Orange, one of the few.

• Acer Crystal Eye webcam stop working and the screen is blank

  * Original title: Webcam screen is black does turn it off by mistake?

  Acer Crystal Eye webcam stop working.  When I click on it, the screen is black.  Turn it off?

  Hello

  -Have there been recent changes made on the computer before the show?

  I suggest you to follow the steps below and update us with the results.

   

  Method 1: Run the hardware and devices Troubleshooter and check.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  This problem can occur if the drivers are corrupt. You can try to uninstall and reinstall the drivers for your webcam. Download the latest drivers on the manufacturers of Webcam site and save it on the desktop.

  http://support.Acer.com/us/en/product/default.aspx

   

  Update drivers: recommended links.

  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 3: You can try the steps and check.

  a. disconnect and then reconnect the Webcam.

  b. disconnect other unused USB devices.

  c. use a different USB port on the computer. If you can, connect to a USB 2.0 port.

  d. If you are using a USB hub, disconnect the Webcam from the hub and connect it directly to your computer.

  e. restart your computer and check.

  If the problem persists, I suggest you to contact the Acer Support for assistance on this issue.

  http://support.Acer.com/

  Let us know if it helps!

• Aspire XC-705 unable to wake from suspend mode, black screen

  Hello, since I updated the BIOS to version P11 - B4 downloaded from the Acer site, when I put my pc in standby mode and then I try to reactivate by clicking a button on the USB keyboard/mouse I hear immediately a 2 seconds one long beep, then the pc seems to be re-activated because the led on the power button goes from flashing to steady , but the screen remains black. Even after waiting more, nothing changes, and the only solution is to push the power button for 3/4 of a second and stops the pc. When I restart the machine, everything works fine and there is s no problem. When I had the previous version of the BIOS and I put the pc into sleep mode, it regularly reactivate by clicking the mouse button or a key on the keyboard. I already updated the video (Intel HD Graphics 4400) card driver downloaded from the Intel site, but the problem still remains. In the BIOS power management options, I did not touch the default options, power ACPI mode S3, power in depth mode is enabled and wake on USB keyboard/mouse is enabled. Anyone who has the same problem or who knows how to solve?

  You read the README?   And follow the instructions in the README pdf file?

  I've never used the AFUWINGUI because I was afraid that something like that could happen to me.  I think you have to be an expert to use the AFUWINGUI (which I am not).

  I guess you should call Acer to be on the safe side.

  These are the instructions Standard Operating Procedure that you were supposed to follow.

  1. download P11. B4

  2. extract

  3. enter a USB flash key

  4 copy the Win and ROM files in the USB flash drive

  5. open a command Admin prompt (you can find invite Admin by right clicking on the Windows Start button)

  6. If your USB flash drive has a drive letter f, and then type...

  F:

  CD victory

  Flash

  7. After completing the flashing process, and then restart your computer.

  8. press Delete on your keyboard when you are prompted to enter the BIOS settings

  9 load BIOS defaults (F9)

  10 save/exit (F10)

  11. This is it

  If my instructions don't make sense, then read the PDF file README "SOP Flash BIOS for Acer Desktop.

• need help with image download and preview screen

  Hi guys,.

  I am trying to download image and then view Preview, but when the download form submits to the placeholder image page itself is not updated his source and shows the same image as before.

  4.jpg image already exists.

  I download with nameConflict = "overwrite".

  Download form on the same page, so the page charging points

  In IE image placeholder does not appear the new image, but shows the old one until I have updated the page with F5 and return information, however if checked, image in the file is already different.

  In Firefox, sometimes it works and the image refreshes, sometimes not.

  any help would be greatly appreciated!

  see you soon,

  Simon

  Hi Simon,.

  In this case, you can follow this tutorial

  http://www.communitymx.com/content/article.cfm?cid=71EDA

  HTH

• Just get black screen on Acer Aspire 7520

  I'm looking for a solution for this problem for almost 3 months now. My Aspire 7520 when tuned to just gives me a black screen. I took out the battery and held the power button down / stop and always the same. I also made sure that the fan has been free of dust and is runnig and I hear that it is trying to load, and now when I turn it off it is itself so I have to remove the battery all together.

  If you get either of the image on an external monitor, it could very well be a video card problem or a problem with the motherboard.  You should contact your local service centre Acer for assistance.

• Black screen with the underscore flashing in the upper right corner - HELP!

  Prouct name - laptop HP 2000-299WM

  Product number - QE282UA #ABA

  Operating system-Windows 7, 64 bit.

  No error message.

  No recent changes before the problem occurred.

  -For starting, my laptop goes to the screen with the logo blue HP and then straight to a black screen with an underscore flashing in the upper right corner. I tried to restore it to its factory settings and other things, but nothing did! Ive been wondering if I should try what I saw worked for another customer here - http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and/Black-screen-with-blinking-cursor-HELP/t....

  Help!

  Hello

  Try typing the esc key when you start the laptop to see if it launches the Start Menu - if this is the case, use the arrow keys to select the Boot Menu, click on enter and then use the arrow keys to select the CD/DVD drive and press ENTER again.

  Kind regards

  DP - K

• How can I know compatible flange and cover for my Acer model aspire 5750g?

  Hello

  I need to change my front bezel and back cover, but I am not compatible numbers for my acer.

  My Acer is AS5750G-52454G75Mnkk or just Acer aspire 5750.

  Help, please!

  Ok. Here are the part numbers (black back cover and black bezel) for Aspire 5750 G:

• I have an Acer Aspire One Netbook. (No DVD player). From the start on the hard drive, I get a black screen with a blinking cursor.

  I have an Acer Aspire One Netbook.  (No DVD player).  From the start on the hard drive, I get a black screen with a blinking cursor.  The cursor does not type.  For me, maybe I need to reinstall windows 7 and startup tasks are corrupt.  I have my product key genuine for the computer, but no way to get to windows.  How to restore windows on a netbook that won't start?

  original title: Netbook Windows 7 problem

  New computers coming often pre-installed with Windows 7 have what is called a recovery partition. This is used to reinstall an operating system in the case of a system failure. To access it, you need to start when you start your computer by pressing a function key. This can be either F1, F2, F9, F10, F11, F12 key DEL or tab. See the manual that came with your PC for instructions on how to reinstall Windows.

  If your recovery partition is not available or damaged, you must contact the manufacturer of your computer, and request that a defined recovery disk you can use to reinstall Windows 7. They could practice a small shipping and handling.

  Borrow a 32 bit Genuine Windows 7 friends DVD disc if you know someone who has one.

  Make an image of the DVD, you can use a program like ISO Recorder to do.
  http://alexfeinman.com/

  If you don't have a Windows 7 DVD to borrow, try to upload a picture:

  32 bit
  http://MSFT-DNL.digitalrivercontent.NET/msvista/pub/X15-65732/X15-65732.ISO

  You change the content of the. ISO file and delete the ei.cfg file. After having edited burn it to a blank DVD disc or put it on a USB key. Startup, it will reveal all editions of Windows 7, select the Starter edition. More information in the following article on how to change the file ei.cfg

  Utility delete EI.cfg allows you to use a product key
  http://Lifehacker.com/#%215438005/eicfg-removal-utility-lets-you-use-any-product-key-with-your-Windows-7-disc

  You can create a bootable USB stick with the following:
  Download Windows 7 USB/DVD tool
  http://store.Microsoft.com/help/ISO-tool

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key (this is the key of Windows 7 Starter, which would be located on the COA sticker at the bottom of your laptop)

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  They will give a confirmation ID, enter it

  Click next to complete the activation.

  Once activation is complete, enjoy yourself, make a backup of your installation of Windows 7 Starter please? You will need to do this an external hard drive, but its worth it. Because if your installation is messed up, all you have to do is to restore from a backup.

  http://www.notebooks.com/2009/10/24/how-to-backup-your-installation-of-Windows-7/

  Once the backup is complete, you can do an upgrade to Windows 7 Professional by using the product key that you have, if it's a full key, Windows 7 Professional Anytime Upgrade retail or upgrade license key.

  Click Start, type Anytime Upgrade, follow the on-screen Wizard, enter the key of Windows 7 Professional on demand, click Next and restart your computer when you are prompted. Less than 10 minutes, you should be upgraded to Windows 7 Professional and your files and settings retained.

  Reactivate the installation, you may also do it by phone:
  Activate Windows 7 manually:
  1. click on start and in the search for box type: slui.exe 4

  2. press enter on your keyboard

  3. Select your country.
  4. Select the telephone activation option and brace yourself for a real person.

• I have my 5 factory reset iPhone, now I can't set up my iPhone because it must be enabled, and I don't have a sim card. Can someone help me please?

  I have my 5 factory reset iPhone, now I can't set up my iPhone because it must be enabled, and I don't have a sim card to make. Is there a way I can install and use my iPhone without needing to be activated? Can someone help me please?

  To skip the activation of sim card, you can use iTunes if you have a CDMA iPhone. However, if you have a GSM model you will need to insert a sim card to activate your iPhone (it can even be used/inactive). Here is an article that will help you determine if your iPhone is GSM or CDMA: http://osxdaily.com/2012/11/15/determine-iphone-gsm-or-cdma/

• Acer aspire m1201 black screen

  When I start windows movies from my computer to a black screen, Ive tried the system restore, install drivers missing and non-functional. McAfee is all this so far with no problems detected. I can get on the computer by pressing f8, then go to low resolution screen and mode without failure, but not normally. It worked for a bit of roll back to a previous display adapter driver, but eventually it stopped working. I can't find anything wrong with it and uninstalled programs that we no longer use. The computer worked fine until we turned on after a weekend away! In addition, it is just out of its warranty. I went to back to factory settings, but did not get a disk of vista with it as it came pre-installed. Help!

  How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

  There is no Vista free download legal available.

  http://support.Acer.com/

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup, Acer should be Alt + F10 to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Ask them if you can also make recovery disk/s of the recovery Partition of hard disk or system failure crash when you're facing up and running again.

  They will tell you how to do this.

  Every computer manufacturer has their way of doing recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  See you soon.

  Mick Murphy - Microsoft partner

• I have an acer aspire v3 - 731. my wifi is turned off and I can't turn it back on. How can I fix it?

  I have an acer aspire v3 - 731. my wifi is turned off and I can't turn it back on. How can I fix it? I know nothing about computers next please developed. Thanks in advance.

  Try to use the fn/f3 as the computer starts when you first see the Windows logo on the screen.

• A toolbar to work is now not checked in Firefox and I can't use it. Can you help me please?

  I used Nectar as my homepage and a toolbar added for many years. I always that it is simple and easy to use (a big plus for aging technophone!) and it is especially useful for letting me know what stores I could shop with through Nectar to increase my Nectar points. Points were also earned to complete the 'research', another useful feature.

  In the past months, I have struggled with this up to the point where I contacted the persistent Nectar. They have kindly added 'free' points to my account to compensate for the fact that I had been unable to use the toolbar or to the shop via the Nectar. They suggested uninstalling and reinstalling the improved version of their toolbar. I tried to do several times, but have failed to be able to access online stores through Nectar and also to add to my total points using the Nectar search tool.

  After trying again, in vain, to reload the toolbar, I now have to find a message from Firefox saying "Nectar Toolbar could not be verified for use in Firefox. Proceed with caution.

  Can you please check this product so that I can continue its use? I don't know how else more to come this problem and would like to make things as simple as they were until this issue has been raised.

  I hope someone can help - but please keep in mind of my state of technophobia and explain things in a way very simple for me (IE without using jargon 'computer' and technical writing!).

  Thank you and hoping that you can help.

  Firefox 40 verification is only a warning message, the new 'signature' feature add-on will keep an extension to work in Firefox 40.

  If this Nectar toolbar simply stop working in Firefox 40, I can only imagine that this is due to a deprecated API that uses the extension or another issued compatibility. Add-on developers who are registered with the official website of modules was warned about this, API removed from Firefox 9 to 12 months to give developers time to fix their add-on before Mozilla removed the corresponding code for this API.

  Bottom line is the Nectar needs to fix their extension to get it working again, AND they need to submit it to Mozilla Add - ons for the signature.

  In 41 Firefox Add - ons that are not "signed" will be disabled, but the user can substitute for it. In Firefox 42 that replace the missing aura of the Beta and Release versions - signature is required for Firefox 42 and subsequently.