model change of unlocking 780 p

Similar Questions

• Requirement of password "you have to change your unlock iPhone code access in 52 minutes.»

  My father is very upset and frustrated, and so I am. I hope that we can be compensated in some way (but probably not).

  My father unlocked his iPhone 5 as usual, then he got a notification on the home screen that says "password requirement you need to change your unlock iPhone code access in 52 minutes.»  We have never seen this before notifcation, and my sister and I have an iPhone more than 6/6.  I told my father to simply ignore it, but then he kept appearing whenever he has unlocked his cell phone, so I told her to choose continue.

  He chose to continue, changed the password from one to 4 digits long, and then he picked up his phone.

  Restarts, the phone prompts you to put in an access code to the first newspaper in attempt before it allows you to use the contact IDS.  It introduced the new password, but it didn't work.  He tried several times, and now it shows there are 60 minute wait.  At this point, it just goes to continue to put in the access code until it restores his phone.

  Why did this happen first? It has a 5 under AT & T's iPhone with the latest version of iOS.

  The new password longer trying to capture is correct, because when you create the password, it asks you to enter twice, and he could not continue if he does not get it right twice.  So why the code was not working?

  Hello gabemstr,

  Thank you for using communities of Apple Support.

  I see in your message that your dad's iPhone shows an error saying: requirement of password you need to change your unlock code.  It seems that your father has a managed iPhone, with a profile that is installed on it.  When a device is managed, it can have certain requirements for password as an age of access code.  I suggest your dad gets in touch with his staff, or deletes the profile.

  By default, the authentication of the user code can be defined as a six digit on taking devices PIN supported Touch ID or a PIN digit on all other devices. In iOS, you can choose from a comprehensive set of password policy to meet needs of your security. These access policies may include requirements for:

  • An access code on an iOS device

  • An alphanumeric value

  • Minimum length of password

  • Minimum number of complex characters

  • Maximum password age

  Password policies

  1. Delete the configuration profile provided with the application.
     • Go to settings > general > profile, tap on the configuration of the application profile.
     • Then click on delete the profile. If requested, enter your device password, and then press DELETE.
  2. Restart your iPhone, iPad or iPod touch.

  How to remove an application that has a configuration on your iPhone, iPad or iPod touch profile

  Take care.

• Locked slides change to unlocked.

  Locked slides change to unlocked when branching in quizzes returns the user to a previous slide.

  The presentation locked slides to apply users to listen to the narration before you can advance to the next slide. Quiz in the middle of the presentation takes the user to a previous slide, gave an incorrect answer. When the user returns to the previous slide all slides become unlocked, leaving the user to pass directly at the end of the presentation. Does anyone know why this might be happening? Any comment is appreciated.

  Hello

  You experience the behavior is because the slides are locked only when seen for the first time. The views of the slide are not locked, and the navigation controls are not disabled when you display for the second time.

  For more information about changing the properties of the slide, see link - https://helpx.adobe.com/presenter/using/editing-presenter-presentations.html#change_slide _ properties

  Also since you want learners to navigate the slides a second time so you can hide the PlayBar on all slides or according to your requirement, using drag handler as in the screenshot below.

  (Note: hide PlayBar only works for the SWF output)

  

  Please mark this answer as correct if you find it useful. Let me know if you need additional assistance.

  Thank you

  Zeeshan Hussain

  Adobe Presenter Engineering Team

• aaa model change to locally authenticate admins

  This aaa model looks Greek to me - I need to change so AP admins and technicians are authenticated locally without breaking something else, he does, as authentication of the clients of a radius server when they join. Is it still possible? I could really use a hand on this one.

  aaa new-model
  !
  aaa group server radius rad_eap
  server 172.x.x.247 auth-port 1645 acct-port 1646
  server 172.x.x.248 auth-port 1645 acct-port 1646
  !
  aaa group server radius rad_mac
  aaa group server radius rad_acct
  aaa group server radius rad_admin
  aaa group server tacacs+ tac_admin
  aaa group server radius rad_pmip
  aaa group server radius dummy
  !
  aaa authentication login default group rad_eap local
  aaa authentication login eap_methods group rad_eap
  aaa authentication login mac_methods local
  aaa authorization exec default group rad_eap local
  aaa accounting network acct_methods start-stop group rad_acct
  

  under your line vty 0 4, what do you have?  You can just have the local connection as long as you have a local user name and password created?

  username privilege 15 password

  line vty 0 4

  local connection

• Data Modeler: change the layout of the Table report

  Hello

  I use SQL Data Modeling (DM) EA 4.0.

  I used the file-> reports option to generate reports on the Table and in the report

  (1) I could not see the data of the type column? (See table below), are there options to set the Type of data in the report?

  NO.	Column name	PK	FK	M	Data type	DT kind	Domain name	Formula (Default value)	Security	Abbreviation
  1	ID1	P

  THERE

  (10)

  LT

  2

  ID2

  F

  THERE

  (10)

  LT

  3

  ID3

  THERE

  (1)

  LT

  4

  ID4

  THERE

  (10)

  LT

  5

  ID5

  F

  (20.4)

  LT

  (2) in the options to manage the Table report (reports-> manage). Currently I can remove a position (like Notes of Descriptions, columns, column comments). Is there any way to customize the report so that I can remove some columns (mostly empty) according to the report and add comments as well as the column table column to a new column comments table.

  Please let me know, is there an option to customize the report.

  Note: I even tried to generate the report using the search then the report, but it does not give a full report (I was only able to generate a report on the column or table name or name constraints, not all together).

  Thank you

  Kheira

  Hi Dimitar,

  There are correct.

  for the report without data type, the data type in my relationship is 'UNKNOWN '.

  I have not changed, but now the type of data in the table are 'unknown '.

  I checked a little more on it and found that in the ADMINISTRATION of my 'TYPES' only unknown is here and the defaulttypes xml file is empty. Then I copied a new one.

  So the new design has the data type, but for that I need to generate sound still 'unknown '. I think I saved the unknown. :-(

  Thank you

  Srinivasan.

• Then save the changes to a model change the divs can be changed on existing pages?

  I made changes in a model that has at least 100 child pages.  When I apply the modified model to these pages to change any of the sections editable child pages?  I guess this isn't, but I need to know for sure.  If I had to review all pages of the child after the upgrade, it would be a total disaster.  When I do revisions on the model it would be better if I deleted all the information in the sections editable in the model so that they would not affect the child pages or would it be empty what is now in the editable child pages parts.  I can't find any info in my market after manual or on the adobe help on this section.  Waiting for your advice.

  Olde Worlde Lace says:

  I made changes in a model that has at least 100 child pages.  When I apply the modified model to these pages to change any of the sections editable child pages?  I guess this isn't, but I need to know for sure.

  The model should not change any content in a "editable region" page of the child. (I'll always do a backup copy of your site folder copy before making any changes just in case something goes wrong)

  Olde Worlde Lace says:

  When I do revisions on the model it would be better if I deleted all the information in the sections editable in the model so that they would not affect the child pages or would it be empty what is now in the editable child pages parts.  I can't find any info in my market after manual or on the adobe help on this section.  Waiting for your advice.

  The contents of the editable on your child pages regions should not change because they are not in areas that are "locked" in the main model.

  I would like to as I said make a copy of your record of site before you disturb updated anything.

  With 100 + pages he sounds like the workflow could be better managed using SSI (SSI). You need to download 100 pages after you make the changes to the model to discover you have missed a change and then I have to re-download the entire batch.

• Model change DreamWeaver does not update of child Web pages?

  Hello group,

  
  Sorry for my question from newbie here.

  I loaded a HTML Web page and try it in a DreamWeaver template file.

  I then created Web pages from the template file ((fichier-nouveau-Page à partir dele de modèle-Site-modèle) and made sure the checkbox "Update Page when changes were made to the model" was selected/checked.)

  Then, I created several children Web pages and saved as .html files.

  I decided to change the system of navigation - part of the region of uneditiabel in the model - bar by opening the template file and edit-ing this file and then saving them in the same DreamWeaver template file.

  However, Web pages were not updated to reflect changes to the navigation bar in the French model?!

  Can someone tell me what I am doing wrong?

  

  I think it's something I'm doing wrong with DreamWeaver...

  If anyone is interested, here is the HTML code.

  -----------------------------------------------------------------------------------

  <! DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional / / IN".
  "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd" > ""
  "< html xmlns ="http://www.w3.org/1999/xhtml">".

  < head >
  <!-TemplateBeginEditable name = "DocTitle"-->
  < Title > CNC Joe workshop - Home Page < /title >
  <! - TemplateEndEditable - >
  < meta http-equiv = "Content-Type" content = text/html"; Charset = UTF-8 "/ >"
  "" < link href = "... / style.css" rel = "stylesheet" type = "text/css" media = "screen" / >
  <! - keep the http-equiv for IE8 meta tag - >
  < meta http-equiv = "X-UA-Compatible" content = "IE = 8" / >
  <! - link CSS file here - >
  "" < link rel = "stylesheet" type = "text/css" media = "screen, projection" href = "... / style.css" / >

  < / head >

  <!-- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -->
  < body >
  < div id = 'wrapper' >
  < a name = "top" > < / a >
  < a href = "index.html" target = "_self" title = "Home Page of CNC - Joe" > "
  "" < img src = "... / joesworkshoplogo.gif" width = "770px" height = "300px" alt = "Shop CNC Joe - Home Page" / >
  < /a >
  <!-- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~ -->
  <!-BEGIN OF MENU DROPDOWN->
  <!-- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~ -->

  < div class = "mainmenu" >

  < ul >
  < class li = "li_nc" > < a href = "index.html" target = "_self" > home < /a > < /li > "
  < class li = "li_hc" > < a href = "cad.html" target = "_self" > CAD < /a > < ul class = "ul_ch" > "
  < class li = "li_nc" > < a href = "cad_intellicad.html" target = "_self" > IntelliCAD < /a > < /li > "
  < class li = "li_nc" > < a href = "cad_draftsight.html" target = "_self" > DraftSight < /a > < /li > "
  < class li = "li_nc" > < a href = "cad_progesoft.html" target = "_self" > Progesoft < /a > < /li > "
  < /li > < /ul >
  < class li = "li_hc" > < a href = "cam_html" target = "_self" > CAM < /a > < ul class = "ul_ch" >
  < class li = "li_nc" > < a href = "cam_mach3.html" target = "_self" > Mach3 < /a > < /li > "
  < class li = "li_nc" > < a href = "cam_vcarve.html" target = "_self" > V-Carve < /a > < /li > "
  < class li = "li_nc" > < a href = "cam_cut3d.html" target = "_self" > Cut 3D < /a > < /li > "
  < class li = "li_nc" > < a href = "cam_bobcadcam.html" target = "_self" > Bob-CFAO < /a > < /li > "
  < class li = "li_nc" > < a href = "cam_meshcam.html" target = "_self" > lattice CAM < /a > < /li > "
  < class li = "li_nc" > < a href = "cam_deskcnc.html" target = "_self" > desktop CNC < /a > < /li > "
  < /li > < /ul >
  < class li = "li_hc" > < a href = "projects.html' target ="_self"> project < /a > < ul class ="ul_ch">"
  < class li = "li_nc" > < a href = "projects_zzeroplate.html" target = "_self" > Z zero plate < /a > < /li > "
  < class li = "li_nc" > < a href = "projects_x0y0edgefinder.html" target = "_self" > X 0 - Y0 Edge Finder < /a > < /li > "
  < class li = "li_nc" > < a href = "projects_digitizingtouchprobe.html" target = "_self" > touch scanning probe < /a > < /li > "
  < class li = "li_nc" > < a href = "projects_millwebcam.html" target = "_self" > mill webcam < /a > < /li > "
  < class li = "li_nc" > < a href = "projects_laseredgefinder.html" target = "_self" > Laser Pointer Edge Finder < /a > < /li > "
  < class li = "li_nc" > < a href = "projects_davidlaserscanner.html" target = "_self" > David Laser Scanner < /a > < /li > "
  < /li > < /ul >
  < class li = "li_hc" > < a href = "reference.html" target = "_self" > reference < /a > < ul class = "ul_ch" > "
  < class li = "li_nc" > < a href = "ref_gcodes.html" target = "_self" > G-codes < /a > < /li > "
  < class li = "li_nc" > < a href = "ref_nema.html" target = "_self" > info motor NEMA < /a > < /li > "
  < class li = "li_nc" > < a href = "ref_vbearings.html" target = "_self" > V-bearings < /a > < /li > "
  < class li = "li_nc" > < a href = "ref_linearguides.html" target = "_self" > < /a > < /li > linear Guides "
  < /li > < /ul >
  < class li = "li_hc" > < a href = "offtopictopics.html" target = "_self" > off-topic topics < /a > < ul class = "ul_ch" > "
  < class li = "li_nc" > < a href = "ott_backyardfoundry.html" target = "_self" > BackYard Foundry < /a > < /li > "
  < class li = "li_nc" > < a href = "ott_blacksmithing.html" target = "_self" > forge < /a > < /li > "
  < /li > < /ul >
  < class li = "li_nc" > < a href = "links.html" target = "_self" > links < /a > < /li > "
  < class li = "li_nc" > < a href = "contact.html" target = "_self" > Contact < /a > < /li > "
  < /ul >
  < / div >

  <!-END OF THE MENU drop-DOWN->

  <!-- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~ -->
  <!-END OF THE MENU drop-DOWN->
  <!-- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~ -->
  <!-TemplateBeginEditable name = 'content'->
  < h2 > projects: scanning Touch Probe: < / h2 >
  < ul >
  < li > < /li >
  < li > < /li >
  < li > < /li >
  < li > < /li >
  < li > < /li >
  < li > < /li >
  < li > < /li >
  < /ul >

  <!-- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~ -->
  <!-- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~ -->
  <!--end of the editable - the rest is boilerplate-->
  <! - TemplateEndEditable - >
  <!-- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~ -->
  < br / >
  < p > < a href = "#top" > top < /a > < /p >
  <!-- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~ -->
  <!-- Footer Region                                                                                    -->
  <!-- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~ -->
  < div id = "footer" >
  < hr / >
  < p >
  "< a href ="http://validator.w3.org/check?uri=referer">."
  "< img class ="logo"src ="http://www.w3.org/Icons/valid-xhtml10"alt ="Valid XHTML 1.0"Transitional height ="31"width ="88"/ > < / a >"

  "< a href ="http://jigsaw.w3.org/css-validator/check/referer">."
  < img style = "border: 0;" width: 88px; "height: 31px;
  "Class ="logo"src ="http://jigsaw.w3.org/css-validator/images/vcss"
  ALT = "Valid CSS!" / >
  < /a >
  < /p >
  < h5 > < strong > < i >
  This site is only for educational purposes. Any resemblance to any person, alive or dead - is purely coincidental
  < /i > < / strong > < / h5 >
  < / div >
  < / div > <!--end Div Wrapper - >
  < / body >
  < / html >

  OK - I thought about it!

  When I edited the .dwt model - I used 'SAVE AS' to save the file - it's FAKE!

  I should have used just on 'SAVE', and DreamWeaver then asks if I want to update the files created with the template.

  Further Questions:

  -Whence the DreamWeaver store information about which pages were created with what model?

• Applying the model change wipe ASP codes

  Using WINXP Pro / IIS5.1 / DW8.01
  It is a new issue for me since the upgrade to DW8.01. Starting with a model of HTML-based Web page, I can successfully create a webpage to login ASP. However, whenever I update the site with a change to the model, the ASP code gets erased from the ASP logon page - everything successfullly is updated - but I lost the ASP code above the header tag. Here's a before and after the model-update code example:
  
  BEFORE - ASP code is successfully added to my page created by model:
  < %@LANGUAGE="VBSCRIPT"% >
  <!-file = "Connections/eocdb.asp #include" - > "
  < %
  ' * Post the request to connect to this site.
  MM_LoginAction = Request.ServerVariables ("URL")
  If <>Request.QueryString "" then MM_LoginAction = MM_LoginAction + "?" + Server.HTMLEncode (Request.QueryString) "
  MM_valUsername = CStr (Request.Form ("username"))
  If MM_valUsername <>"" then
  MM_fldUserAuthorization =""
  MM_redirectLoginSuccess = "eoa_limited.asp"
  MM_redirectLoginFailed = "access_error.html"
  MM_flag = "ADODB. Recordset '.
  Set MM_rsUser = Server.CreateObject (MM_flag)
  MM_rsUser.ActiveConnection = MM_eocdb_STRING
  MM_rsUser.source = "SELECT username, password"
  If MM_fldUserAuthorization <>"" then MM_rsUser.Source = MM_rsUser.Source & "," & MM_fldUserAuthorization
  "MM_rsUser.source = MM_rsUser.Source &" "FROM tblAccess WHERE Username ='" & Replace (MM_valUsername, "'","" ") &"' AND password =' "& Replace (Request.Form ("Password")," ' "," "" ") &" ' ".
  MM_rsUser.CursorType = 0
  MM_rsUser.CursorLocation = 2
  MM_rsUser.LockType = 3
  MM_rsUser.open
  If not MM_rsUser.EOF or not MM_rsUser.BOF then
  "correspondence of username and password - this is a valid user.
  Session("MM_Username") = MM_valUsername
  If (MM_fldUserAuthorization <>"") then
  Session("MM_UserAuthorization") = CStr (MM_rsUser.Fields.Item (MM_fldUserAuthorization). Value)
  On the other
  Session("MM_UserAuthorization") = «»
  End If
  If CStr (Request.QueryString ("accessdenied")) <>"" and then false
  MM_redirectLoginSuccess = Request.QueryString ("accessdenied")
  End If
  MM_rsUser.close
  Response.Redirect (MM_redirectLoginSuccess)
  End If
  MM_rsUser.close
  Response.Redirect (MM_redirectLoginFailed)
  End If
  % >
  <!-InstanceBegin template = "Templates/site_template.dwt' codeOutsideHTMLIsLocked = 'false'-> <!" DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional / / IN".
  " http://www.w3.org/TR/html4/loose.dtd" >
  < head >
  ...
  
  AFTER I update via the model:
  <!-InstanceBegin template = "Templates/site_template.dwt' codeOutsideHTMLIsLocked = 'false'-> <!" DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional / / IN".
  " http://www.w3.org/TR/html4/loose.dtd" >
  < head >
  ...
  
  The ASP code is removed. Do I need to change one of my preferences since the 8.01 update? I don't have this problem using PHP or JSP - ASP only. Any ideas? Should I go through the resources?

  Found the problem! I re-installed DW8 + Updater 8.01 and opened the site of problem. I have rebuilt the model with the new facility, and for comparison, I noticed that under the 'old' installation, the application of the 'old' model had removed the HTML tag at the top of each page. Under the 'new' installation, re-apply the reconstructed model has left untouched the HTML tag and corrected all the child pages.

  According to me, a different "Hmmm..." is appropriate here. Thank you for your imput - I appreciate your time on this.

• Data Modeler - change the DDL table instructions

  I am trying to add a new foreign key and a column to a table which already exists in the database. I generate the DDL Data Modeler but I can't change the declaration for the new column.
  
  How we prevent data Modeler to generate the DDL that change of name of table in < table_name > _bcp / delete the table and then re-create the table?
  
  I don't want to create a backup table and I don't want to delete and re-create the original table to add a column. In fact I can't even delete the table due to the other tables that refer to it.
  
  So it is possible to change the declaration of DDL generation instead of the drop and create statements?

  the reason for this is schema - uncheck ' property usage pattern in compare features "in" General Options > DDL.

  Philippe

• Data Modeler: changing attribute Table grayed out (in the relational model)

  I use SQL Developer Data model version 2.0.0 build 584.
  
  I have a relational model of appr. 30 paintings. For some tables, the display of attributes is grayed out, not allowing not of any change of the values. I have a feeling that this was due to an import/merge views of database, but for me this quite annoying because it prevents modelling activities further on these tables.
  
  Does anyone have an idea what could be the reason for this? More importantly: how to remedy this situation?
  
  Mark

  Hi Mark,

  Does anyone have an idea what could be the reason for this

  the reason is probably the difference in design name and name in the next item in the XML of the table:
  
  It is interesting how you did this.

  More importantly: how to remedy this situation?

  You can try ' Save as ' to save the design in a different directory.

  Philippe

• display shows 4g and changes once unlocked wifi sign

  Having an iphone 6 and downloaded new ios the other day.  Just noticed that when I first unlock the 4g phone appears after a few seconds, it shows the wifi symbol... it takes all place home where the wifi router is on and works fine.

  If you have not used the camera for a while, and it is not connected to the power, a wi - fi connection goes to sleep and will reconnect only when you wake up it. Which is what it looks like you do. It is by design.

• No connection / loading plug by models change Sansa upgrades to their products.

  I'm looking at the "rocket" for my first mp3 player.  I want to invest in Accessories for this product that will be usable for future mp3 Sansa players, if I switch to a future model.

  Sansa retains the same configuration of plug connectivity to older models like the e260 they use with the "rocket".  Or I will arise to get new sheets of food / fm transmitters / systems of speakers if I stay with the Sansa brand for many years to come.

  I hope that if I am the brand Sansa - configuration of the plug will remain consistent as new models come out?  What are the chances?  What has been the recent history of the company?

  Thank you

  The c200, e200, and view all use the same connector. I can't be sure of all the others, but I think a few other models use the same connector as well.

• Without locking model phone unlocks automatically touch

  My fingerprint sensor is works well and unlocking... whenever I tried the power button / stop and tries to unlock jacquard its not not watch the model rather his unlocks the phone touch... instead of the finger print icon of showing in the middle Center downstairs, its showing some lock icon... If I press its showing phone stays locked until she unlocked manually... then his fingerprints shows icon and illustrates model to unlock

  Yo boyfriend could put your home region as a location approved in your device. So even if, in your community, it will just unlock directly. Turn that off and you're good to go.

• Are the ID models 'live' such as changes can be updated across multiple documents?

  SCENARIO: I have a document (DOC_A)... where I do a model (TEMP_T)... which I am the second fa document (DOC_B).

  [A-> T-> B]

  After working on DOC_B a few weeks, I find that I made a few really nice changes (paragraph and font styles, etc), which I'd be happy to incorporate them in the original DOC_A.

  [retro-update: B-> T-> A]

  QUESTION 1: is the underlying TEMP_T "live" in the sense that I can make changes through DOC_B, and then these changes reflected in (i.e. upgrade) DOC_A? "

  QUESTION 2: if not, what would be the best or most effective, update DOC_A so that she joined the favourable changes made to DOC_B?

  Thanks in advance.

  You cannot live through a model change.

  In a similar situation my workflow is to use the InDesign book. I'm doing a book whose only purpose is to be able to update any document of a book with paragraph and any any other book of the document font styles, etc.. This is based on timing, and you can even synchronize the different elements of different document. Try it.

• Change the HARD drive in the laptop Satellite P10-304

  I bought a new hard drive for my laptop toshiba satellite sp10, can someone tell me were the hard drive is in the laptop, so I can change it as it does not tell you in the instructions booklet
  Thank you
  jm75uk

  Hello

  For some portable models change HARD drive is very simple and not complicated. Change the HARD drive in your case will be not so easy, and in my opinion, you should contact the service partner. I don't know how old is your laptop, and if the warranty is still valid, but as Tobi said if you open the Briefcase with laptop computer on your own, you can lose the warranty.

  I don't know, but the HARD drive should be placed somewhere under keyboard because on this model there is no coverage of HARD drive in the lower corner.

  Good bye