Model of batch processing is suspended when Windows is locked

Similar Questions

• Variable overall station by the object to be measured using a model of batch process

  Hello

  I have 4 DUT which is tested by using individual ports of com I use global variables Station 4 to store 4 Com ports - COM port assignments are in no particular order and vary depending on the test PC station.

  Example:

  S1 = Com12

  S2 = Com14

  S3 = Com10

  S4 = Com9

  Using a model of batch process I want to test DUT all at the same time: I'm trying to understand what is the best/better way to S1 to S2 for UUT2, UUT1 and so on!

  Any help appreciated.

  Thank you best regards &,.

  Shane.

  The easiest way is to use the property Runstate.TestSockets.MyIndex to index a table.  Each socket of the batch will get an index (from 0 to n - 1, where n is the number of sockets) when it is created.  You can create an array (of strings? I can't tell if you just have channels or need a container) and use the property for the index in the array.

• Access to information USE testsocket in the model of batch processing

  Hello

  I have a custom reminder pre-batch TS 4.0, which fills in the serial numbers, part numbers, etc for the DUT being tested (using a model of batch processing). These variables are found in the pre-batch settings. However, I can't understand how to access these values further reminders (SequenceFilePostStepFailure, for example).

  In the pre-batch sequence, I can access the serial number for UUT4 using Parameters.ModelData.TestSockets [4]. USE. Serial number. But I can't find the object of ModelData when you don't the pre-batch and tried to look in the root, runstate, hand, sequence, etc., without a bit of luck.

  Any thoughts?

  Thank you

  Chris

  You can find it at:

  RunState.Root.Parameters.ModelData

  There will be only at runtime, and only when you actually run using the model of batch processing.

  Hope this helps,

  -Doug

• Out of sync a station with the model of batch process?

  Hello

  My project has 5 test stations are run in parallel. I decide to use the batch process model because I want that they start and stop together. Next to startup and shutdown, I have some part in the need for synchronization of the entire test sequence. But in 5 stations, I want a workstation without flash sync to these steps. I tried to use the commands synchronize with the precondition, but it looks like that other stations are waiting for that one I jump the sync. My other option uses rendervous with number of parallel thread total is - 1. I test it and it works. But I still want to know if I can use batch synchronize step or not because it offers synchronization of start and exit synchronization.

  Thank you!

  NTT says:

  Doug,

  Thanks for your reply.

  I want to have something happening parallel with other threads, but without effect by steps of synchronization batch. I have several workstations parallel to the Assembly line. They are sync due to the pick and place. But I want to have a process is functioning as the station manager who keep track of USE between the train station and other site conditions such as pressure, temperature.

  Thang

  As a general rule, the intent of the TestSockets in the process templates is that they will have a 1 to 1 with DUT match, taking your 5th corresponds to an object to measure? In other y 5 DUT tested at the same time? DUT often need things like logging database or report generation. Your 5th decision-making requires the generation of reports? If not maybe this 5th Jack is really more than one thread of utility and creating a new thread or performance during execution makes sense for her. If your 5th instead making it really fits under test DUT in parallel enitrely separately from others the DUT then maybe you should start up a new run for the socket using the sequential model and just run as your other shots are running with the model of batch processing.

  So, it really depends on what you use this 5th station/thread to find out which method would probably work better.

  Hope this helps,

  -Doug

• News station using the batch process model

  Hello

  I have a test sequence using a model of sequential processes and station information by using the following, I.

  RunState.Root.Locals.StationInfo.StationID

  RunState.Root.Locals.StationInfo.LoginName

  I create a new test sequence that uses the model of batch process - when I try to enter the information Station data using the syntax above I get the following error

  Name of variable or unknown property 'RunState.Root.Locals.StationInfo '.

  Can some advice please if I go to the wrong place when using a model of batch process?

  Thank you best regards &,.

  Shane.

  Batch and parallel models you can access this information using:

  RunState.Root.Parameters.ModelData.StationInfo

  -Doug

• How do I switch parameter (Instrument addr) model of batch test

  Hi all

  How to pass parameter for the type to step in the model of batch processing?

  For example: test taken = 2, the 1st use of USE the instrument (Addr = 10), the use of USE 2nd instrument (Addr = 11), how to pass the addr = 11 for the type of step?

  Hi weschen.

  When you refer to "pass the parameter for the type to step in the batch processing model", it is you making reference to the call for a subseqeuence and passing a parameter with a SequenceCall in your file of the client's sequence?

  Also, you try to pass a value to different address for the parameter of your sous-suite based on the TestSocket index?

  -Jeff

• Batch processing dialog box USE information

  I need to customize the model of batch processing with CVI. Need to add 2 for example several channels of serial number of the batch on top, remove the status message, bottom of socket - don't show the Seraglio etc number box. It looks like the files that I need to change are batchuutdlg.c and modelpanels.uir.

  Found that the source code is under "Instruments\TestStand National 4.1\Components\Models\TestStandModels." What are the best practices to make the change to the regulations provided the code? Also what files will be needed, if all the updated code will be then be in the same directory?

  Please notify.

  It depends on what version of TestStand you have.  Back in the day (I think that pre 4.0) there to be users and the folder OR in each of the folders TestStand. You had to copy into the users folder and make changes there.

  Nowadays (certainly with 4.5, but not sure about 4.1 knowledge is true for 4.1.1), you would put any change to the public folder.  If you go to: C:\Program NIUninstaller Instruments\ you will see a link to something called the TestStand Public folder.  This file should be structured like the file.  The same and all directories.  When you change the native code copy you on public directories and this way you always have native original code if you need to go back.  In addition, it handles situations where you might not be an administrator on a computer - you cannot edit files in Program Files.

  If you look in the search directories in TestStand, you will see that it refers to the Public folder first, then the Aboriginal file.  In this way that it captures your code always updated first.  So if you were to spend the SequentialModel.seq in the public folder your way would look like this: C:\Documents and Settings\All Users\Documents\National Instruments\\Components\Models\TestStandModels\SequentialModel.seq (for XP).  But you would still have the (unchanged) SequentialModel.seq on in the Aboriginal file.  When a sequence file loads and will enter the process model, he looks first in the public record and captured this process template.

  In your case, it would be one of the files you mentioned.  Well I think that you would like to move all of the CVI code above, so it can stay with the prj.

  When you go to deploy on the first tab, there's a checkbox called: deploy files to the directory Public TestStand.  If all of your customizations will now be included in the deployment.  It will put their new in the public folder on the deployment computer and the search directories should be similar, so you would be good to go.

  Hope this helps,

• batch processing model loop

  How to set the model of batch TestUUT loop once? You need to use TestUUT and not only passage require the dialog box of the UUT.

  In process model so step ' Goto next batch "is modified to create a branch to"- end of batch loop -", discussions do not stop.

  Please advice.

  The simplest thing for you to do is in the verification of sequence/reminder pre-batch Parameters.ModelData.BatchLoopIndex if it is > 0 or > 1 (forget if it is 1 or 0 according to), then set Parameters.ContinueTesting = false rather than perform the steps that are normally performed in this order. That is it really. That should do it.

  Hope this helps,

  -Doug

• I would like to install my Acrobat 8 Standard on a new laptop (Windows 10) I bought to replace my desktop model existing (Vista). In the process of establishing a window pops up saying that necessary files "the file"Adobe PDF.dII"on Windows Vista is requi

  I would like to install my Acrobat 8 Standard on a new laptop (Windows 10) I bought to replace my desktop model existing (Vista). In the process of establishing a window pops up saying that necessary files "the file"Adobe PDF.dII"on Windows Vista is required. Type the path where the file is located, and then click OK". What should I do to work around this problem. According to the agreement of the user, I should be able to install the program on a second computer.

  If you are using an installation disc, copy the contents of the drive in a desktop folder and install from this directory.

• Why do I need to use GIMP for batch processing?

  Dear Adobe,

  I am grinding wheel through thousands of images to display and model for an online retailer. Masks and Photoshop layers came in quite handy when I was doing the models

  but now that it's went down to reuse these templates, I have to look elsewhere.

  1. why any other piece of software on the market have a lot deals section, and yet you hide your?

  2. why not the image processor to resize horizontally and vertically, although it claims? In fact, he won't distort the image to resize, which in fact, I want to do it. I had

  to download GIMP to achieve this functionality, as well as to specify the output file and change the dpi. These are all included in GIMP but not Pshop. Thank you for that. And do not tell

  ordering me to go to stocks. It is perhaps useful to something of things, but it is hardly the best way to do this, save your exact measurements and then by saving or not saving, then

  See what's happening. Like I wanted it was in GIMP and its pathetic that 20 years, Pshop still doesn't have a credible batch processor, or tell me where it is now.

  Additional charges for this maybe?

  3. what has changed in Bridge CS6 since CS4? I see absolutely nothing different, but then the output is still limited to PDF and "WEB GALLERY" a dysfunctional glob

  code easily came out of jquery, but maybe you have impoved ending. My last experience with web gallery was so dysfunctional that I'll just stay to fix what has

  under the hood myself. I mean web gallery used as flash, then something else which is not common. Let's just agree that this is an option of amateur. Of course

  I don't know why 'exit' may include other options for the batch processing of files, since actually rename the batch works, but you are the decision makers.

  4. its too bad. This work has taught me a lot of new things about layering, masks and the functionality of the configuration section, I have no qualms with, however,

  considering how many companies you have purchased, you may want to include tons of features used in these programs, but it would be too the patterning

  expenses of Mgmt. Maybe we'll just fix the views of the window that we broke in CS4 and call it a new version.

  5. thanks for forcing me to discover GIMP, that does not demand a thing. I don't really like to be there yet, but we'll see if that changes with time. They actually have some

  different filters and rendering options that Adobe could have included years there are firearms, but even once, there are just simply not enough money for everyone at Adobe.

  Why?  Simple: because you know not how to use the application.

  You know, it never fails: the strongest mug shot, plus the likelihood of PEBKAC.

  In closing, I would like to remind you that you are not addressing Adobe here in these forums from user to user.

• Model vs batch model in parallel

  Hi, I'm starting to develop a new machine that manages 12 DUT. I have 4 edits, 3 DUT each. The 4 light should go independently (in parallel), 3 DUT on each device should go in lot of sharing the communication channel. This application is the perfect mix between batch and parallel model; the solution will probably lie somewhere between the sequential and parallel model. Then, there are 2 ways:

  1. From parallel model and try to synchronize the DUT 3 in the same match. I could use a notifire to start the test then a synchronization batch share the communication channel.
  2. From batch processing model and try to group 3 DUT. I could change the 'waiting' for all test sockets.

  1st solution sounds better to me. How will you approach this project? There will be no PLC controls the machine. You would control all i/o directly in TS? I would like to order the machine with a manager who communicates with the TS (a state machine executables LabView). What is your feeling about that?  Thank you for your support.

  Hello

  I'll give you my thougnt on your questions but id that another user will come with more suggestion, it will be welcome.

  I agree with you prefer the first solution.

  Basically, you need a parallel process model, and then you have the means to manage synchronization (declaring for example).

  When you say 'control all I\O TS' you mean have an adapter (for example, LV) called by TS that running the operation I\O? I think that it is correct.

  For the latter, the most common architecture is to have TS as responsible for you, test and LV code called TS but not the opposte steps.

  Good bye

  Clara

• Firefox does not close when Windows stops

  When Windows (in my case: Win XP SP3) stops, it sends a message ("QUERY_UNLOAD" in many programming languages) that active programs can finish their job (e.g. lay on unsaved data), then exit. It seems you developers have reached Firefox v25 and not thought of programming this little piece-> Windows stop - a Firefox open don't give a fuck on the output, you must cancel it via Windows.

  It would be nice to have this little programming effort done - finally - thank you.

  Firefox may have need of more time to close properly that allows Windows and in the case where Windows is abandonment of Firefox closing process then you given are damaged, then always first close all programs in particular Firefox before close the computer or check if you can make Windows do wait at least 30 seconds or more (you can check in the Task Manager to see how much time Firefox takes to close).

  See also:

  • "Cling to the exit": http://kb.mozillazine.org/Firefox_hangs
  • "Firefox crashes when you exit the he": https://support.mozilla.org/kb/Firefox+hangs

• The desktop icons and taskbar disappear when windows has finished starting - any of the usual things help

  I have a Windows XP Home Edition with a breath main card computer.  Replaced the Board, PS and other items.  Then re-activated windows and everything was fine.  Until the last moment, I rebooted after activating it.  I have the problem that I have seen posted in a bit.  When Windows has finished initializing all the desktop icons and task bar etc. disappear.  Nothing works.

  I can bring up the Task Manager and manually run programs, etc.

  Believe me when I say I spent reviewing EACH reference to this problem... Yes 5 days and counting... Tried them all.

  I also tried a repair of windows in place which ends without any problem (twice)... but still no icons or taskbar.  I also ran several controls of virus, including one for the virus, which is usually the cause of this problem.  (fsnimda3.exe), I tried all the ideas in another thread (page 9) and many other institutions.  Before I did the reconstruction of the material I've cloned the original hard drive and have used the disc cloned juggling his original for the back.  Even tried to reinstall the old disk and do a comparison of sector by sector, in the case where my cloning process missed something.  In the 30 years I've been in the computer business I have never had a re - format a hard drive to solve a problem.  BUT I think it will break my record.

  I'm doing this as a favor for a friend.  But at this point our friendship is really put to the test

  Hello

  This thread has been created in wrong forum; Microsoft moderation team has moved this thread to the system repair and recovery forum.

• How to manage startup programs when Windows Defender is disabled?

  How to manage what programs to start with Windows when Windows Defender is disabled?  I am running Vista Home SP2 with Microsoft Security Essentials.

  http://wiki.answers.com/Q/Where_is_msconfig_on_vista

  You can use msconfig or the program below.

  And search for particular software tools > Options re start.

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more. Autoruns goes way beyond the MSConfig utility bundled with Windows Me and XP.

  See you soon.

  Mick Murphy - Microsoft partner

• "The process of home for Windows Services

  Why do I get the message that the host process for Windows Services has stopped working and closed whenever I try to start my computer?  What is the host process for Windows Services and what I can do to solve the problem?

  Hello

  What is rundll32.exe and why it works?
  http://www.howtogeek.com/HOWTO/Windows-Vista/what-is-rundll32exe-and-why-is-it-running/

  What is the suspicious Rundll32.exe process?
  http://WindowsXP.MVPs.org/Rundll32.htm

  -----------------------------------------------------

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------

  If no joy trying to determine what is the cause:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see who are loading is method 2 - using MSCONFIG, then post a list
  of these here.

  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out what are the files, registry keys and other objects processes have
  Open, which DLLs they have loaded and more. This exceptionally effective utility will show same
  you who owns each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured so that it starts automatically when your system
  boots and you login. Autoruns shows you the full list of registry and file locations where
  applications can configure Auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Startup Type
  (Registry/Startup folder), Command - Line String, the product name, file Version, company name,.
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.