Model of card mother T7500 and configuration of the controller RAID LSI 1068e

Similar Questions

• How add and configure a new controller AIR-LAP1142N-E-K9 Access Point WLAN-AIR-WLC4402-12-K9

  How add and configure a new controller AIR-LAP1142N-E-K9 Access Point WLAN-AIR-WLC4402-12-K9

  'option 43 hexagonal f104c0a80a05' looks right to me...

  If you're talking about only a few APs, you could hold the AP in the same vlan as the WLC Management Interface and allow discovery by diffusion...    Once he knows the controller you could put in a different subnet and you don't even need option 43.

  But then again, Option 43 I guess is a safe bet to ensuring that the always AP knows an IP address to find out.

• G60 upgrade card mother, processor and wireless card

  I have a hp g60-237nr. I'm looking to upgrade the motherboard with something that has a dedicated video and can take an Intel processor. Also, I want to run the fastest cpu I can to this Council. I also like the faster wifi card for this advice as well. Thanks in advance for any help.

  Well here is the best motherboard for him:

  Map of discrete system, PM45 (includes built-in modem, Digital Media Slot, HDMI port, and)
  a replacement thermal material) 488338-001

  Here is the Service Manual:

  Manual

  Best processor:

  Processor Intel Core 2 Duo (6 MB of L2 cache, front-end to 1066 MHz) bus:
  Processor ■ T9400 2.53 GHz 490113-001

  Best Wi - Fi card:

  Atheros AR9280 802.11a/b/g/n 482260-001
  Atheros AR9280 802.11a/b/g/n 482260-002

  Thank you for your enthusiasm and ambition, but the problem is going to be the best motherboard to use nVidia GeForce 9200 video which is old and not very strong and the system tops out at 4 concerts which is not a lot of RAM these days. The parts you want will not be very expensive, largely because they are outdated and not very useful.

  But if you have to pay for the labor to do this, it will be unaffordable.

  I know that people grow attached to their laptops, but if you want to get your up-to-date computing power, it is the time to buy a new laptop. If you want to continue to move forward, after return, we can help you find the parts you need. It is likely that will have to be eBay; HP no longer the motherboard in stock that I am sure.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Replaced the card mother zd8000 and need a hand, help please...

  Hi all

  I just replaced the motherboard on our HP zd8000 (pentium 4 3.0 ghz, 2 GB ram, Win XP) with an opportunity tested but good MB and need help with the following.

  (1) I cannot play DVD movies as the error 'no dvd decoder' present which was not a problem before now?  Where can I get a free decoder that works as Windows displays only paid versions?  We have the drive to dvd with lightscribe. SOLVED! CNET has DECODER.

  ---------------------------------------------------------------------------------------------------------------------------------------------------------------

  (2) internal temperature, according to SpeedFan, revolves around 140 degrees with just surfing the Internet.  Is this a normal temperature because I have only one of the three fans running on the laptop?  Is in any case to all the three fans running to be sure there is no problem?  I'm positive, I plugged everything but still once a single fan seems to work?

  (3) I discovered that some of the pins were damaged in the card reader.  I can get the seller to give me a discount, not intend to tear apart just for it, but is there the concerns of short or otherwise?

  (4) our battery arrested charge years ago, these were known as such, but I bought a new one last year and hope that the replacement MB would load it again.  No luck though.  Can I do, update of BIOS etc, in order to make the battery charge?

  (5) whatever it is you people can think for me to test to make sure the new motherboard is working correctly?

  Thank you, Ralph

  PS, It's a replacement card correct according to the serial numbers of MB.  Everything seems to work properly except mentioned.  Our graphics came out on the original MB.

  Some of the sons had grown out of the harness that connected the two other fans.  I double checked and replaced these so now the laptop works quite a bit cooler.

  EVERYTHING IS GOOD TO GO!

• Card mother ASUS and VMWare ESX 4.0

  Could someone install ESX 4 on an ASUS P5E WS Professional motherboard model? I tried to get a clean work install but no luck. I use RAID to recognize 2 partitions. I can't even ends the installation when it CMTF on me. I read someone turn off ACPI but you disable all interrupts the CPU and he's going nowhere in it. The version of BIOS ASUS is 1101; Processor: Intel Core 2 Quad CPU @ 2.66 Ghz, 4 GB DDR-2 800 Mhz.

  If you have been able to get a clean install, please let me know.

  Thank you

  I hold at this stage to ESXi 4.1... Since there will be another version of ESX go ahead (4.1 is the final version) you might as well get on ESXi now. In addition, there is no ESX, ESXi upgrade path. So if you want to install the next version (assuming that you can get the equipment to work for the next version), you will need to perform a complete reinstallation.

  You could also install ESXi 4.1 on a USB flash drive to avoid the hard drive problems (where lives of ESXi) on your installation. I managed to install ESXi 4.1 on 4 GB SanDisk Cruzer flash drive (model SDZC6-4096). I installed ESXi 4.0 on a 2GB SanDisk Cruzer Titanium (SDCZ3-2048) flash drive. More recent variants same lines should give good results. You can get the latest version (SDCZ36 - 004G - A11) 4 GB disk for<$10 on="" newegg...="" i="" would="" avoid="" using="" cheap="" branded,="" or="" non-major="" branded,="" flash="" drives="" (kingston,="" crucial,="" corsair,="" lexar="" are="" good).="" i="" would="" also="" go="" with="" their="" high="" performance="" models,="" to="" ensure="" that="" you're="" not="" setting="" yourself="" up="" for="">

  What drives do you actually use inside this box? I have seen that make a difference too, not just the controller.

  VMware VCP4

  Review the allocation of points for "useful" or "right" answers.

• How to replace the card mother, processor and memory in my office without having to buy a new code for Win 7 Utimimate detail?

  In January, my original motherboard died and I replaced the jury only with other printed device using all my old components. When I started to the top of the first time I was warned that my version of Win7 is not valid. (I had used since I bought it in August 2010 without any problem) So I bought a new Windows 7 Ultimate full retail Microsoft online to get going again. Now, 3 months later, it's blue, screening and stop randomly. The Board of Directors, the memory and cpu are all about 7 years and I want to update the new and updated components. How can I do this without having to spend another $207 for a new copy of Windows 7?

  When you transfer the license to a new motherboard, reactivate just by phone, as you said that it is a full commercial license:

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• All your existing data transfers for win8 win7? The same thing happens to the settings and configuration of the printer?

  Original title: fact of data transfers

  All your existing data transfer of win7 for win8 and do o all your settings and printer configurations do the same thing

  The upgrade to Windows 7 or later will preserve my personal files, applications, and settings?

  Yes, the upgrade to Windows 7 or a later version will preserve your personal files (documents, music, pictures, videos, downloads, Favorites, contacts, etc., applications (IE.) Microsoft Office, Adobe applications etc), games and settings (ie. passwords, dictionary, the application settings).

  My programs, equipment and existing drivers will work on Windows 8?

  Most of the applications and designed for Windows 7, hardware drivers or later should work with Windows 8. Of course, with significant changes expected in Windows 8, it is preferable to that contact the software developer and supplier of equipment for the support for Windows 8. Windows 8setup will be keep, update, replace, and may require that you install new drivers via Windows Update or the manufacturer's Web site.

  Backing up your computer:
  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7.

  Also check:

  How to back up and restore your files manually

  To learn more.

  The upgrade from Windows 7 to Windows 8

  Please note that if you migrate to and not 8.0 Windows 8.1, you must perform a custom installation.

• Is there a process or program that I can use to restore the system and configuration of the system to the original

  Hello

  I would like to know if there is a microsoft tool or a suggested list of Microsoft that could help me restore the system and the system configuration files in the appropriate State. is not the restoration of the system. I don't know of retoring my computer to an earlier time, nor on the restoration of computer purchase. 

  I thought that my computer has been compromised in some way, and the intruder was accessing my unit via some sort of connection distance.

  I received the support of the malicious software company, and I think that my computer is fine now.

  And so the question with which I opened this post: I would like to know if there is a Microsoft tool or a suggested list of Microsoft that would help me to restore the system and the system configuration files in the appropriate State. I'm not taling about system restore. I speak not of retoring my computer to an earlier time.

  Whenever I start to notice the strange behaviour of my computer, I would like to launch this program and follow this procedure to reset all the settings and files to a suitable State. The reason why run alone to detect malware problems, and that if there is remote access to my computer inadvertently, the intruder can do a lot of editing of files which is not identified by the malware. and I believe that if I was able to run a program like this, all the changes took place, which expose my device, but the rules of behavior systems can be reversed for a proper state.

  I read an article on how to repair my operating system, but it forced me to get a copy of it; However, given that the supplied operating system with preinstalled on this computer, I could not follow the instructions. Article I read to all system and configuration files that meet the standards of the manufacturer, without losing files and installed programs.

  Thank you

  Hello

  Already, you mention that you can do; either a repair installation.

  "How to do a repair installation to repair Windows 7"
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  And make sure that read you all the information under 'warning'.

  It also tells you what drives you can and cannot use to do.

  ________________________________________________

  You can use this to fix the corrupted system files.

  "Command SFC/scannow - System File Checker.

  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  «Use the System File Checker tool to repair missing or corrupted system files»

  http://support.Microsoft.com/kb/929833/en-us

  But if SFC detect serious errors in the file system, you may need to do a repair installation as in the instructions in the first part of this answer.

  See you soon.

• Installation and configuration of the EMP 11.1.2 planning

  Hi Experts,
  
  I installed the script:
  
  Distributed - environment
  
  Components of hyperion server 1-install on drive C
  Hyperion Server 2-installs on the C drive components
  Hyperion Server 3 installed on the D drive components
  
  
  Is it OK if I configure on the drive C or D.
  
  Is it mandatory to have the installation/config on the same directory.
  
  
  Concerning
  Kumar
  
  Published by: Kumar 1 September 23, 2011 05:39
  
  Published by: Kumar 1 September 23, 2011 05:42

  As the documentation that States the same directories.
  I have not changed the base directory in 11.1.2 there are a number of environment variables and registry settings pointing to directories, but I advise to change.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• requirements and configuration of the mobile module

  I want to control an appliance using a PDA. I want answers to the following questions

  1. I have a nokia with great software symbian smartphone, I can use it.

  2. how to set up a laptop, I use lv 2010, do I need to purchase a license (such as the SCCT or something)

  Thank you

  The only way to do so is through the interface of the web server. The mobile module supports only the Windows Mobile OS - and not even the most recent version.

  Mike...

• Question about recommended Lightroom library and configuration of the synchronization

  I move to a Windows workstation for my main machine from my Mac. I install Lightroom on it as my main photo management software. My library is currently stored in iCloud library on my Mac, and it syncs with my iPhone and iPad in iCloud. What would be the best solution to make my pictures my Windows workstation PC and sync them with my iOS devices? Should I leave them in iCloud photo library, synchronize with my PC, and then catalog them in Lightroom, or should I move them to iCloud library directly imported and stored in Lightroom and then synchronize Lightroom with my iOS devices? Can Lightroom for iOS also copy photos since iOS Photos and in the case I need to use the iOS library selector in other applications? Thank you!

  Hi mallardnathan,

  In order to use Lightroom on the Windows Machine without any problem, we suggest to remove your iCloud photo library images and move it completely on windows, where machine, you can add your images in Lightroom.

  Whether you plan to use Lightroom as your main Photo management software, you should be aware of what Lightroom does not store your images in it like your other software.

  You can synchronize your images from your desktop to the iOS device to make changes, you can add images from the photo library of iOS and synchronize on the Lightroom on your desktop.

  It will be useful.

  Kind regards

  Mohit

• Receive error message on installation and configuration of the laboratory of Automation Center IaaS component vCloud

  

  You install the .net on the correct server? Because printing, I assume this is a Windows Server 2003, and according to the following link, .net Framework 4.5 is not supported by Windows Server 2003: .NET Framework system requirements

• Laptop card mother size and structure question

  Here of another question, I have acer aspire 4755g, and in this series, they have a lot of different types of processor but it still have the same shape and design. If I want to replace my old motherboard with a motherboard latest and modernized, my old one so intel i5 and gt540m 1 GB of ram, I want to replace it with the new motherboard coming with i7 and gt540m 2 GB of ram, I checked that the motherboard was of the same type in terms of chipset and version in some of the series of line acer4755g , so what worries me is that I'm afraid if I use the new motherboard does not correspond to my laptop, I want to say I'm afraid that the alignment of the screw will not be the same in my laptop, so I need some, it will be ok if I just buy the new motherboard for my laptop? has anyone have the same problem as me? anyone ever change their motherboard with a newer version and it can still work perfectly?

  link on acer 4755 g - http://specificationslaptop.blogspot.com/2012/05/acer-aspire-4755g-intel-core-i7-full.html

  Hello mangaboy190,

  It's me again!

  The Aspire 4755 G comes in 4 colors: Brown, black, red and green.

  There is only a single lower lid for all models.

  As the motherboard is mounted on it, the distance between the mounting holes are identical.

  Two motherboards and a low cover so...

  The bottom cover part number:

  60.RPT01.001

  COVERAGE. LOWER

• First time with a card mother OEM and try to find the drivers

  Hello world

  This is a new game for me, the world of OEM motherboards. I just realized that a certain type of motherboard a motherboard manufacturer can have all sorts of variations when performed as an OEM Board for the likes of HP.

  I have just acquired an old Pentium 4 motherboard. Now, before your eyes start to roll, I am is not a cheapskate here and in fact need this type of motherboard, not a sign of bang dual core or quad wiz who actually do not work with my software. It is so why I am persevering with a print like this.

  It's an Asus P4SD - Rev 1.06

  3 pci slots

  1 agp slot

  4 usb ports

  1 firewire port

  1 ethernet port

  1 PS/2 mouse port

  1 PS/2 keyboard port

  4 memory DIMM slots (some computers HP with this Council have only 2 DIMM slots)

  Built No. taken in vga (seems some versions of this Council have built in graphics)

  So not knowing what HP computer that came out I cannot locate the correct drivers. As far as Asus goes, this card is not listed on there pilot site.

  Y at - there no way to know what HP PC came this motherboard?

  See you soon,.

  Keith.

  On the issue of SATA - if the installation disc that serves as an integrated SATA drivers then then this might explain it.  WinXP on its own did not include them, but some have them slipstreamed into the installation. Either that or the BIOS was set to emulate the IDE interface for easy installation.

• 0Y5CWX model of card mother Dell Inc. (XPS 12 9250) need manual or help locate the CMOS pins

  Where are the CMOS pins on the motherboard 0Y5CWX?

  There is no "CMOS pins.  If what you're trying to do is reset to the default values, just disconnect the battery and hold the power for 30 seconds.

  If you try to reset a password, note that it is not stored in the CMOS - it is stored in the EEPROM.  The only way to do it is get an unlock code by calling Dell, verify your ownership of the system and entering the password they generate for you.