Model of cluster deployment

Similar Questions

• SOA Suite 11 g Composite soa Cluster deployment

  Hello

  I installed an environment of 11g two nodes clustered soa with HTTP server called roads to the Admin group and SOA load balanced url. Deployed a composite criterion to the cluster of soa.

  endpoint of the test a node1 service name of host and HTTP load port of balance because of which I could test my service manager of the company. I replaced the url with load balanced host and tested in the browser and works very well.

  Then some body help me if I'm missing some configurations. How can I get load balancing url in the Web service endpoint when I deploy it on my cluster soa. Help, please.

  Thanks in advance.

  Thanks for the nice reply. Yes for our customer it is no problem to access the service with load balanced url. I want to fix this in the EM console. As indicated, I put the front end host and the port for cluster of SOA in the initial configuration itself.

  It ask me a question, would it because my HTTP server and node 1 are installed on the same node host names with different aliases?

• Auto & ESXi 5 Cluster deployment dependencies

  Hello

  Chicken before the egg here question: I have a cluster DRS/HA with 2 5 ESXi hosts. I would use Auto Deploy to theses guests. Automatic deployment is installed in vCenter Server is virtualized and lives in this cluster. If for some reason, I can stop the two hosts (power failure) scheduled without UPS intervention or of backup generator how will host later be put into service if they are both without disk and response to Auto deploy for their configuration? A host will require ESXi must be installed on a disk (local or remote) and be powered with vCenter Server (and therefore deploy Auto) before running the other host comes online? Basically a host is using Auto deployment for its configuration, and the other host uses the method of classical records?

  Thank you

  Steve

  Steve,

  I would not recommend using AutoDeploy if you only this two-home group and either ESXi hosts.

  AutoDeploy is designed to facilitate the deployment and management of patches of large scale environments.

  In such environments, it is advisable to have a separate group dedicated to the performance of the machines of critical infrastructure (such as vCenter), and the hosts of this "group" should not use AutoDeploy, but must be installed in a traditional way.

  -Andreas

• Tips to get a Vista model to successfully deploy a virtual machine?

  I'm under ESX 3.5.0 with VC 2.5.

  I have a Vista VM, which was created using an image that I've created (unfortunately). I was able to correctly create the virtual computer, add it to the domain, configure everything, etc. I converted to a template and attempted to deploy a new virtual machine from this model. He created the virtual machine, but seems to have not successfully completed the sysprep process or what that Vista is called these days. I would like to know if there is anything special I need to do to make this work. I am currently trying to create a second VM just to make sure that I did something wrong the first time. It is my understanding that with Vista, I cannot copy the sysprep on this exact VC, is - server files? I created a customization specification using the same process I did for my XP specifications that has never failed me. The error I get is attached. It seems that it is looking for an unattend.xml file. So, who were on the image sent to me by corporate? Any help would be greatly appreciated. Thanks in advance.

  The second attempt at cloning a virtual machine has as well. He came to the final stage of the customization and failed with the same error the file attached. She then lifts upwards a pop-up window saying "Windows is unable to complete the installation. To install windows on this computer, run the Setup again. »

  Process sysprep for Vista is completely different from XP.  You must use the windows system image manager to create the answer file, more details are here on TechNet:

  http://TechNet.Microsoft.com/en-us/library/cc721929.aspx

• Steps to deploy a Windows 7 x 64 model workstation?

  Hello

  We have already prepared a Windows 7 x 64 model in reference to

  How to create a model of VMware Windows 7 | Notes of MWhite

  When we put in place the Customization Wizard, we would like to ask for your opinion:

  (1) should we select "automatically connect as an administrator?

  (2) should be added to all orders of "Run once"?

  (3) when join us domain, can we just use user = admin / password = password for the domain administrator OR user must be DOMAIN\Administrator?

  When we deploy the model, should choose the option 'power on the VM?

  We encounter some problems when you deploy the model

  (1) even if the workstation is started, it is not automatically log on as administrator and I have to manually connect.

  (2) nothing happens, and so I restart it

  (3) it is said that sysprep is to customize, then

  (a) name of workstation has not been changed

  (b) administrator is disabled (on the web, I find that the Windows 7 Administrator account is disabled after sysprep)

  We try to restart the virtual machine and every time he says sysprep to customize the virtual machine, but there is no improvement.  Should I wait?

  Your opinion is requested.

  Looks like the administrator password that was entered when creating the answer windows comments customization file is incorrect. which is the reason why the sysprep command is not worked and it automatically log on does not work. You must confirm double if her you have entered the password for the administrator account on your model in the comments Customization Wizard.

  This should be the administrator password of the model used to deploy virtual machines.

  

  (1) should we select "automatically connect as an administrator?

  It depends on. But leave it like 3 times to automatically Log on Just in case

  (2) should be added to all orders of "Run once"?

  Depends on your environment or the obligation to execute commands as part of the strengthening of security or etc..,.

  (3) when join us domain, can we just use user = admin / password = password for the domain administrator OR user must be DOMAIN\Administrator?

  Required domain administrator credentials. Under the area of Windows Server text box, enter the domain name, followed by the user name, password and confirm password in the respective text boxes.

• PowerCLI: Deploying VM problem of model using PowerCLI

  Hi all

  
  I'm trying to deploy [clone] virtual machines from a template that is located in a NFS using PowerCLI script.

  First the script will add the NFS to the ESX host. Since NFS added, it will save the file .vmtx to the inventory. Then, the model, it will deploy as many virtual machines as specified in the XML file.
  But after adding the NFS, when the script tries to enumerate on the 'data warehouses' available, the added NFS shows for some hosts. So in turn, the le script script fails.
  
  I am running PoweCLI 5.0 and host is ESXi 5.0
  

  The script used is

  function Reg_Template

  {

  Param ($hsname, $dsname, $DSPath, $TMPNAME)

  $strMyHostName = $hsname

  $dsBrowser = get-View (Get-View (Get-VMHost-name $hsname) USER.USER). DatastoreBrowser

  $dcname = get-datacenter - VMHost $hsname

  $folder = get-View (Get-data center-name $dcname |) Get - Folder - name "vm") USER.USER

  foreach ($dsImpl to $dsBrowser.Datastore)

  {

  $ds = get-views $dsImpl

  if($DS.) Summary.Name - not $dsname) {continue}

  $strMyTemplateDatastorePath = '[' + $ds. Summary.Name + "]" + "" + $dspath

  # get the View .NET object for the destination folder

  $viewDestinationFolder = get-view ViewType - file-name of the property - filter @{'Name' = $folder.name}

  (# save the model third param $true means to register as a model)

  $taskMoRef = $viewDestinationFolder.RegisterVM_Task ($strMyTemplateDatastorePath, $tmpname, $true $null,')

  (Get-view ViewType-HostSystem property name - filter @{"Name" = $strMyHostName}). MoRef)

  $task = get-views $taskMoRef

  While ($task.info.state - eq "running" - or $task.info.state - eq "on hold")

  {

  $task. UpdateViewData ("Info.State")

  }

  If ($task.Info.State - eq "success") {break}

  on the other

  {

  Write-Host $task.Info.State

  recorder $fh1, 1, "Failure adding" $tmpname "to" $hsname

  }

  }

  
  

  Can someone give cela seconds and check whats up.

  Thanks in advance.

  Can you try to add after you create the data store based NFS?

  Get-VMHostStorage - RescanVmfs

  On all your servers ESX (i)

• Cloning of VM vs deploy from model

  I'm trying to understand if there is a good reason to convert the VMs of models and their deployment rather than clone.

  The option of customization of comments is available both to deploy templates or cloning of virtual machines. It seems that this is the option which requires SysPrep to run and create a new SSID.

  That being the case, is the only reason why I can think about converting a virtual computer model to freeze so that no one can run it by accident and make changes. Is this true?

  Thank you.

  Yes you are right that, in regard to the authorization, you can set some users to have the ability to deploy models only...

• Deploy the VM from a model using personalization and passage of IP information

  Ok

  It is not as it should be so difficult, but I can't make it work.

  Here's the deal, I have several different models that we deploy since.  I also have a different customization for each of these models.

  In the customization, the only information that must be provided at deployment time is intellectual property information.

  For example, if I want to deploy a VM of Windows 2003, I would use my 2003 Windows and customization model.  In this file, all information Windows are specified and the only items that I need to specify is what will be IP from Nic 1 and what will be the nic 2 IP.  Does anyone know how to pass these variables in order to deploy the machine?

  This command also works a long time that I do not specify the intellectual property information.

  New-VM - VMhost ESX1 - VM1 - Windows_2003_Template model name - data store Datastore01 - OSCustomizationSpec

  I have 2 cards I need to configure under construction.  In the customization file, I said to prompt the user for the IP address, but the gateways, dns servers, wins servers, are already configured.  The only variable, what will be the real IP.  How to get those 2 IP addresses in the customization of the OS cmd.

  New-VM - VMhost ESX1 - VM1 name - model Windows_2003_Template - data store Datastore01 - OSCustomizationSpec-ipaddressnic1 10.10.10.15?

  New-VM - VMhost ESX1 - VM1 name - model Windows_2003_Template - data store Datastore01 - OSCustomizationSpec (what happens here)

  I saw several post, but have been unable to get a response.  I use the latest version of powershell. (4.1)

  LucD,

  Thank you! that little powercli was almost exactly what I was looking for.

  Greg.

• Creation/deployment of a model of linux

  Hi guys,.

  Can you point me to a reference on how properly create/deploy a model of operating system based on linux? For windows, I created a basic OS and then converted/cloned it to a model. Regarding deployment, I placed the sysprep.exe on the appropriate on the VCS directory and then I can customize everything new deployments (host name, admin password, etc.) by using the created model. Is there a similar way of doing things for linux templates?

  Thank you.

  For the supported Linux distributions, you can customize the virtual machine (ex during cloning) or model (ex during deployment).

  "Customization" tools are included in VC.

  So tryied it with work also with derivation of RedHat (CentOS, Mandriva,...) and it works.

  Andrea

  * If you found this device or any other answer useful please consider awarding points for correct or helpful answers

• Model of virtual machine deployment process.

  I'm trying to understand the model way VM deployment works to design a distributed environment of VirtualCenter with effective model commissioning. My scenario and the question is;

  • I have a NFS location to store my VM models.

  • Mount the NFS on one of my (ESX01) ESX hosts using a VMKernel port.

  • I save the VM model on this host ESX (ESX01).

  • I have a second host ESX (ESX02) who doesn't have the mounted via NFS.

  • Deploy a VM from this model to ESX02.

  Question: How is the copy of the model deployed/copied to the ESX host?

  • Is copied on the VirtualCenter server, then to ESX02 VM?

  • Is the copied virtual machine on ESX01 to ESX02 via the network of the Service Console?

  • There is another way, that the template is created?

  If anyone has a detailed understanding of the model deployment process, it would be much appreciated.

  Thanks for your time,

  Dan.

  Given that the source is mounting NFS using vmkernel, should be out of this interface in all cases.  If you have NFS mounted on both ESX hosts, then it will use vmkernel port on the computer virtual source where the template has been saved.  Because you can not have a template with the same name, you will have to re-register the template under a different name, so that it looks like ESX a completely different model.

  -KjB

  VMware vExpert

• Model of LabVIEW VeriStand 2013 IO question

  During a project, that I'm working on, we decided to update our version of NI LabVIEW 2013 and 2013 VeriStand. For this project, we manage a combination of models, the .lvmodel and the .dll (compiled model Simulink). These models are deployed to an RMC 8354 using VeriStand. Following this update we have questions on our models LabVIEW successfully deploy. I was able to reproduce the problem with a very stripped down or isolated, version which I enclose. In this model, there is a digital control, a Boolean control, and a cluster that contains a digital control. There is also an indicator of each corresponding data types. All numerical values are double precision. The model block diagram is empty except for the controls and indicators, no cables or other elements. Without you connect controls and indicators of the model will be fine. If I connect the 3 orders and 3 indicators from different types of data, I get an error, the log to deploy it is attached to the post.

  I am also attaching VeriStand project files, the VI of model and the integrated version of the model.

  I wonder, can anyone, or any who already has, reproduced this unit or a similar problem? Anyone has any ideas on what may have caused this error to occur or how to solve the problem?

  Also available as a download manual here. More information on patches can be found here.

• How it is possible reflect changes in workbench in cluster environment

  Hi all
  
  I'm running short MachineA and MachineB with separate MDEX engine.
  Cluster dgraph is implemented on MachineA with MachineB, so data will be updated on machineB when I run the update of baseline on MachineA.
  I installed the Manager experience on MachineA and created a few pages using Workbench.
  The rules are getting fired for MachineA without updating the base, but I noticed that even do not work for MachineB even if both machines are clustered.
  When I run update MachineA rules-based work with MachineB.
  
  
  How it is possible reflect changes based on the two clusters MDEX engine without running the update of the base.
  
  Please let us know your suggestion.
  
  Thanks in advance,
  SunilN

  Hello!

  Maybe you should take a look on the model User Guide deployment-online pages 71, 72 and 73 title short Workbench deployed with Dgraph overview

  "This deployment approach requires a new Dgraph to set up in the production environment to.
  use the Workbench Dgraph preview.
  This Dgraph is updated as well as others in the production environment every time that an update
  treated, but it serves no traffic for the purposes of production. Instead, this Dgraph is used to
  get a preview of short Workbench.
  By default, short Workbench uses an ABC script to update the MDEX engine with new configuration
  whenever you press the button to save the changes. With this approach to deployment, the default functionality
  update each production Dgraph in addition to the overview of Dgraph.There there are two ways to replace
  This default behavior. »

  about speeking you can see how to declare a dgraph overview in addition to that, you use as you ex-workbench new experience Manager
  hope that helps
  concerning
  Saleh

• CompactRIO Deploy Error "LabVIEW: resource not found.»

  Hello

  I use a 9002 CompactRIO and LabVIEW 8.5.  I made a simple FPGA VI to read a bunch of analog inputs and write a square wave to a few analog outputs.  Then, I made an another VI to run on the target in real time in order to convert the frequency scaling and updated entries nationwide cycle duty cycle values and frequency real accountability.  When I try to deploy the VI in real time, I get the following:

  Deployment r03fsae (the goal settings successfully deployed)
  Deployment of special audit Tags.vi (5.89 K)
  Deployment GetRTHostConnectedProp.vi (3,41 K)
  Deployment of search and replace Pattern.vi (8,11 K)
  Deployment nirviFillInErrorInfo.vi (8.09 K)
  Deployment niLvFpgaErrorClusterFromErrorCode.vi (11.27 K)
  Deployment nirviErrorClusterFromErrorCode.vi (5.93 K)
  Deployment error Code Database.vi (3.67 K)
  Deployment to find Tag.vi (10.43 K)
  Deployment of fusion Errors.vi (6.75 K)
  Deployment Whitespace.vi topping (3.71 K)
  Deployment nirio_MultilineStringToArray.vi (8,81 K)
  Deployment nirio_AppVersionToI32.vi (3.96 K)
  Error error Code.vi (23.42 K) Cluster deployment
  Deployment _nirio_device_attrSetString.vi (9.46 K)
  Deployment _nirio_device_close.vi (9.90 K)
  Deployment nirio_Read32.vi (13,07 K)
  Deployment _nirio_device_open.vi (11.59 K)
  Deployment nirio_Write32.vi (13,01 K)
  Deployment _nirio_device_writeBlock8.vi (9.83 K)
  Deployment nirio_Write8.vi (13,01 K)
  Deployment _nirio_device_configSet.vi (11.42 K)
  Deployment nirio_DMAReconfigureDriver.vi (16.63 K)
  Deployment _nirio_device_writeBlock32.vi (9.36 K)
  Deployment nirio_Read8.vi (13.04 K)
  Deployment nirio_DMAStopAll.vi (11,39 K)
  Deployment _nirio_device_attrGetString.vi (13.06 K)
  NirviReportUnexpectedCaseInternalError (String) (5.58 K) .vi deployment
  Deployment of .vi nirviReportUnexpectedCaseInternalError (U32) (4.72 (K)
  Deployment _nirio_device_readBlock32.vi (14.41 K)
  Deployment _nirio_device_attrGet32.vi (13.85 K)
  Deployment nirio_IsItOKToDownload.vi (7.07 K)
  Deployment nirio_MiteNTDeviceFamily.vi (5.30 K)
  Deployment of Format Message String.vi (7.35 K)
  Deployment CORE.vi General Error Handler (51,02 K)
  General Error Handler.vi (13.19 K) deployment
  Simple deployment Error Handler.vi (10.01 K)
  Deployment nirio_CheckDriverVersion.vi (10,58 K)
  Deployment _nirio_device_attrSet32.vi (13,62 K)
  Deployment nirio_Download.vi (29,31 K)
  Deployment nirio_ConfigureRegisterAddresses.vi (7.11 K)
  Deployment nirio_CleanUpAfterDownload.vi (6.22 K)
  Deployment nirio_PrepareForDownload.vi (6.44 K)
  Deployment nirio_EnableInterrupts.vi (13.76 K)
  Deployment nirviRIOSetUpMiniMite.vi (31.23 K)
  Deployment nirio_Open.vi (14.93 K)
  Deployment nirio_Close.vi (10.95 K)
  Deployment nirio_DisableInterrupts.vi (11,10 K)
  Deployment of nirviIntfOpen_cRIO - 9102.vi (85,54 K)
  Deployment of nirviIntfClose_cRIO - 9102.vi (12.24 K)
  Deployment of scale freq and duty.vi (4.46 K)
  Deployment XDNodeRunTimeDep.lvlib
  Deployment XDNodeRunTimeDep.lvlib:loadlvalarms.vi (5.47 K)
  Math.vi sensor deployment
  Could not download the math.vi sensor
  LabVIEW: Resource not found.
  LabVIEW: Resource not found.
  LabVIEW: Resource not found.
  LabVIEW: Resource not found.

  Download completed with errors.

  This error message is not particularly useful, someone knows what could be my problem?  Or how I can fix it yet?  Is there a detailed journal where I can look for more information about the error?

  Thanks in advance for any help!

  Hi David,

  You may be walking on ground dangerous with your fpga code, old and new.  You use the modules in what is known as 'calibrated' calibration mode that is of fixed point math.  Your generation of square wave fpga using whole math, which is normally used when the modules operate in mode calibration "gross". To change the calibration mode, you will need to right click on the module, then select it desired mode to use.  I'm not saying that you do.

  What you need TO do to ensure the proper functioning of your fpga VI is to make sure that you use U32 son of math required and then convert the U32 an FXP using the correct encoding (if it is signed, word length and integer).  In your case the 9263 requires signed word in length, 20-bit, 5-bit all over.  Insert an FXP conversion between the generation of square wave and either create a constant FXP of the appropriate type (or use a control correctly put in place of one of the other 9263 channels [AO0 AO1]) and connect to the node of type of fixed point on the conversion OR define the conversion of fixed point with a right click on the exit node and the appropriate settings in the popup box.

  As for your new code fpga, I don't know why you used a sequence structure that your reading of 18 channels on the 9205 will have 144 microseconds, and each write two channels on the 9263 will take 5 microseconds.  I've not worked on how long will take the square wave generation.

  I do not understand your last question.

  > "I've attached a screenshot of my pwm_out.vi if I remove control of read/write of background, or if I don't use of all none of the analog inputs, it works fine.

  > But as soon as I add the analog inputs it fails... ».

  Did you create a new stream of your fpga_new.vi and referenced in your pwm_out_new.vi on the RT?

  It is difficult to guess what you are showing in the screenshots.  If the project is not too big then maybe you could post here.

  As mentioned above, by JMoto, software versions help.  Check in MAX you have on your PC and also on the cRIO 9002 to make sure that there is no incompatibility.

  See you soon

  Stephen

• Error during the deployment of my program for RTOS

  Hello

  When I want to deply my program in RTOS, the following error message if poster and doesnot allow the deployment successful, finishing Yes alreay s is not possible for me to work with the system.

  I use a host computer, a system in real time with it s RTOS (Labview real-time 8.6) with compact RIO cards and an FPGA card.

  The error is:

  ´´´´´´´´´´´´´´´´

  Deployment niLvFpgaAdjustHostInterfaceError.vi (12,10 K)
  Deployment of (10,27 K) niLvFpgaErrorClusterFromErrorCode.vi
  Deployment nirviErrorClusterFromErrorCode.vi (6.68 K)
  Deployment of pad Whitespace.vi (4.23 K)
  Error error Code.vi (350,11 K) Cluster deployment
  Deployment nirio_WriteBig.vi (23,59 K)
  Deployment nirio_CleanUpAfterDownload.vi (5.82 K)
  Deployment nirio_Download.vi (13.76 K)
  Deployment nirio_DisableInterrupts.vi (12,35 K)
  Deployment nirio_ReadBig.vi (37,66 K)
  Deployment nirio_IsItOKToDownload.vi (6,64 K)
  Deployment nirio_ConfigureBitstreamVersion.vi (13,58 K)
  Deployment nirio_PrepareForDownload.vi (6,64 K)
  Deployment nirio_EnableInterrupts.vi (13,58 K)
  Deployment nirio_Open.vi (13.91 K)
  Deployment nirio_Reset.vi (12,35 K)
  Deployment nirio_DMAStopAll.vi (12.37 K)
  Deployment nirio_ConfigureRegisterAddresses.vi (6.63 K)
  Deployment nirio_DMAReconfigureDriver.vi (17,41 K)
  Deployment nirio_GetCompilationResults.vi (13,61 K)
  Deployment nirio_Close.vi (11.28 K)
  Deployment of nirviIntfClose_PCI - 7813R.vi (85,91 K)
  Deployment of Volts on Temperature.vi (34,01 K)
  Deploy NI 9211 Convert temperature (calibrated) .vi (7,86 K)
  Deployment nirviFillInErrorInfo.vi (8.53 K)
  Deployment nirviReportUnexpectedCaseInternalErrorHelper.vi (5.51 K)
  Deployment .vi (4.98 k) nirviReportUnexpectedCaseInternalError (String)
  Deployment nirviReportUnexpectedCaseInternalError (U32) .vi (5.20 k)
  Deployment of nirviIntfOpen_PCI - 7813R.vi (90,91 K)
  Deployment deployment 2010_Library.lvlib\\192.168.0.19\2010_Library failed (error:-2147467259, LabVIEW: unspecified error (Hex 0x80004005).).
  Completed with errors of deployment

  ´´´´´´´´´´´´´´´´´´´´´´´´´´´´´´

  I made lot´s efforts to solve it, but no results, I am sure that the problem is not because of my program, I checked some differenet programs and the result is the same, I guess something happened to my computer RT or my OTR.

  Thank you in advanced for your help.

  Hola,

  por lo as he visto, el error tienes esta asociado has several things between las that include the version of LabVIEW, the led driver (OR-RIO) y el engine analysis. Para solucionarlo vamos a hacer back try cosas:

  1 - restore todo el software del cRIO.

  Ve Al para ello MAX > Configuration > remote systems > cRIO-9012 > software. Select software con el boton derecho y pincha sober Add/Remove programs. Desinstala todo el software del cRIO. When is reincie, boring the Operación para instalarlo. At the hora of seleccionar el software than dedicate instalar, marca NOR-RIO (my) x.x.x (ano). NO selecciones option OR-RIO x.x.x (my) (ano) with the help of the Scan Engine OR. Reinicia y vuelve a hacer el deploy para ver el error if ha notice.

  2 - Formatear el driver.

  In primer lugar, el Hay mover DIP Switch led driver safe MODE has the position IT. Ve al MAX, select el cRIO-90xx con el boton derecho y Select format the drive. Once formatted el driver y reiniciado, dale the IP y subred used mascara y reinstal todo el software según lo descrito en el paso anterior (Scan SIN motor mount). A hacer el nuevo prueba deploy desde el proyecto.

  NOTE: The change remember IP del cRIO en el arbol projects of LabVIEW.

  Esta forma're como is solucionan los errores del tipo "deployment completed with errors. Suerte con ello!

  Jesus

• Deployment of 200 + 7925Gs

  Does anyone have any experience with massive deployments of IP phone 7925 G wireless?

  We have 200 + to unwind.  We try to find a way to simplify the process.

  Does anyone have advice?

  Ways to avoid setting up each phone individually?

  Thank you!

  Fri

  Look for what's called the Cisco 792 x (or 7921 but it works for the models x 792) deployment utility in bulk.  I've been as far as a proof of concept and been able to make it work.  Then the rest is internal procedural matters.  Give a read to get the general idea.  First of all, I made a default configuration which shared a username & password just to check the process worked - it is not recommended, because a disabled account could very well take all your cordless phones.  Download the deployment of Cisco utility and there should be documentation available for it too (http://www.cisco.com/web/software/282074239/14006/792xBD.1-0-Readme.pdf).  After an initial test then I worked with the bulk Deployment Utility to create by the configuration files of phone that uses a CSV file (list of phone, MAC address, usernames and passwords) that are combined with a model with the rest of your settings to configure connectivity wireless on the phone.  Overall he will deal more preparation work (creating accounts for each phone, generating config files and placing them on the TFTP server, but it runs pretty smooth throughout.)

  OK here's an email summarizing my play with this a few weeks back:

  General process

  (1) enter the new phone and insert the battery

  (2) power on the device - it connects to the ssid "cisco" and pulls down and applies the config of the WLAN.xml file (if it exists) or WLANDefault.xml, which he pulls from the TFTP (IP address specified in DHCP Option 150).

  (3) restart the phone (manually)

  (4) the phone connects to the production network and pulls down the latest firmware.

  Step #3 rang me more time than I care to admit - I was expecting after you download the config file which it applies and reconnect to the network and go on its merry way, but for some reason that doesn't seem to be the case.  A power off & on solved this problem and product at least consistent behavior.

  The date never syncs completely to the top, but I think what will happen once the phones are defined in the call manager and telephone recording ends.   There are methods to generate a CSV file containing the MAC address, user name and password for the unique deployments in bulk.  This file is then used with the file WLANDefault.xml (which would change to contain no identifying information) and generates unique files by phone (WLAN.xml).   These files must be copied to the TFTP server, and then when the phones appear on the network they download the appropriate configuration file based on the MAC address and apply to phones.  That should mean without manual configuration steps other that power the phone off & on in steps 1 & 3 above.

  The implementation is finished here - using VLAN 93 (192.168.93.0/24) and the "cisco" SSID has been added only to apname (other than broadcast).  An ACL has been applied, allowing the network to obtain a DHCP address from the DHCP server and extraction of files from the TFTP server.

  A process should be developed for the ID of user for the devices and then adding them to a CSV file.  This CSV file would then be used by the deployment utility mass to create some configuration files for each MAC address in the file.