model of switch to run win 95

Similar Questions

• Can I Exchange an old HD XP to my new HD running Win 7? I need to recover data

  Hello

  I have an old m10560y of HP Media Center PC with a PJ751AV 160 G hard drive SATA 7200 RPM, which I removed because the motherboard is damaged. I was running Win XP on this machine. I only need to retrieve data on this drive... not going to use it with the new HD (below)

  I currently have an HP Pavilion Elite e9150t by the following:

  Windows 7

  10G RAM

  AVO47AV 750 G 7200 RPM SATA 3G 8 / S HD

  Model #: e9150t
  Product #: NY810AV-ABA
  Software Build #: 93NAv6PcA5
  Service ID #: 110-811
  PCBRAND: Pavilion

  I want to disconnect the existing 750 G HD (Win 7), plug the HD 160 G (Win XP), retreve data on an external hard drive and then plug the HD 750 G and be on my merry way.

  Can I do this?

  Will there be a problem running the old HD 160 G because it works under XP or it will be plug and play?

  THX

  g

  If connected to a USB port, so no, the computer should detect Windows on the internal disk and boot off that. Not all models have motherboards that can even allow the boot off the USB connections. You should be fine. Even if it does not, simply unplug the USB cable before entering Windows and then plug it to the top.

• Running win - 7, I get inept MSN homepage when I open Firefox and don't know how to change it for Google (for example).

  I just changed computers and downloaded Firefox on my new machine. It runs Win - 7, then I'm inept homepage of MSN with news about celebrities and ads every time I open Firefox. How can I change it to, say, plain vanilla Google?

  See https://support.mozilla.com/en-US/kb/How%20to%20set%20the%20home%20page

• HP 250 G4: Need to Synaptics TouchPad driver for HP 250 G4 running Win 7 32 bit

  Hello

  I need a Synaptics TouchPad driver for HP 250 G4 running Win 7 32-bit. When I go on the site of HP driver and enter the product number and the serial number of my laptop all the getting is the driver for Win 7 64 bit. There is a 32-bit driver for Win 7?

  Serial No.: [personal information]

  Product no.: N1A78EA #ABU

  Thank you

  Sean

  Hello:

  The driver also supports 32-bit operating systems.

  I explored the driver file and there is a 32-bit drivers.

  Also, when you explore the driver folder, you will find this document I zipped upward and the joint below...

• SMBus and usb drivers for Pavilion P6-2312ea running Win 7 x 64 3

  Hello

  My step daughter has finally threw his arms up in the air and agreed that win 8 is more pain on a desktop that is worthwhile and is not for her.

  We have installed Windows 7 64 bit and are now just trying to find the compatible drivers for SM Bus controller and usb 3.0.

  I'm assuming that the drivers for usb 3.0 as the keyboard and mouse are ok, just the 2 front usb 3.0 do not work (although that seemed to have given up after a week).

  We executed the 'original' pilots when he was running Win 8 x 64, but they don't seem to have. Maybe a compatibility problem, can be me as it was very early this morning when I gave up for a while.

  Any help/pointers gratefully received

  TIA

  Elmer

  Hello

  Please check the following post:

  http://h30434.www3.HP.com/T5/desktop-operating-systems-e-g-Windows-8-software-recovery/SM-bus-controller-and-USB-controller-drivers-for-Pavilion-P6/TD-p/2814635

  Kind regards.

• Is there a way to copy Pinball off laptop XP of my wife and put on my own running Win 7?

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • Can I copy Pinball or other games off a laptop under XP and put them on my laptop running win 7?

  Can I copy Pinball or other games off a laptop under XP and put them on my laptop running win 7?

  If it came with your PC, you can find it in this folder: C:\Program Files\Microsoft Games. Copier copy on a USB device, then transfer them to your windows 7 PC.

• Running win XP pro sp2 mouse moves, but everything else does not

  Running win XP pro sp2 mouse moves, but everything else does not respond after a certain time. Just started doing this last month. Had Xp for several years without ANY problems at all.

  Hi BobM202,

  1. did you of recent changes on the computer?

  2. you receive an error message?

  3. do you have security software installed on the computer?

  4. are you referring to freezing except office mouse movement?

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

• CD/DVD on my D610 running Win 7 does not detect a blank DVD

  I just bought a Dell D610 with Win 7 and my optical drive doesn't detect any blank DVD in the drive.  CD is fine and I am able to burn a CD, but do not detect any DVD, be they + R or - R.

  The player is able to detect and play the burnt meadow or store bought DVDs very well.

  I've been to the Section of the driver of dell and get the message that the OS is not supported.  I tried to load the driver for my drive but no luck.

  I have two D610s, one running XP and the reader detects and burns DVD fine.  I swapped the drive of the laptop with Win 7 and used on one with XP and it works very well.

  Tried both discs on one running Win 10 and again, they fail to detect any blank DVDs, I tried, including Memorex and Maxwell discs with no luck.

  Both drives are HL-DT-ST CDRW/DVD GCC4244 ATA

  Current driver version: 6.1.7601.17514 Date: 2006-06-21

  I also tried the Driver on the Dell download site, but that doesn't work anymore.

  I have read suggestions to remove upper and/or lower limits, but this info is not listed in the section of the registry.  Could this be the issue perhaps?

  Any help would be greatly appreciated.

  Hi acamara,

  This disc is a CD-RW/DVD-ROM. It can read and burn CDs, but it can only read DVD, not burn DVDs.

• I inherited a laptop running Win 7 Enterprise. I've used for a while now and upgrade to Windows Pro 10

  I inherited a laptop running Win 7 Enterprise.  I've used for a while now and upgrade to Windows Pro 10.  I have no problem buying software, but would like to know if there is a way to force an update rather than a clean install, which will let to me having to re - install several months value of applications and the tweaking associated.

  Thank you.

  JLOB

  Try this work around:

  https://www.reddit.com/r/Windows10/comments/3wn9cc/can_someone_with_win_10_home_check_this_for_me/

• Cannot download Microsoft Security Essentials. Running Win 7 Pro

  Running Win 7. Uninstalled all anti-virus software (I think). Has tried various ways to download MSE, but get the message "Windows Program Compatibility Mode not supported by this program.   0x8004FF71 error code.

  Help, please... I'M RUNNING WITHOUT PROTECTION.

  Anyway Panda should be uninstalled before moving to 10 then reinstalled after,

  Personally, I'd skip any upgrade if you really count on a stable system in which 10 is no where near stable like 7

  Most of the time victory-10 requires a facility clean, just to be in a stable way

  This kind of stability will be lost soon after loading the programs...

  What ever you decide to do not create or associate an account of $ M with your username :D

• CDFS driver sys disabled in windows 7. activation procedure. running win 7 ultimate

  CDFS driver sys disabled in windows 7.  activation procedure.  running win 7 ultimate.  This happened only a few days ago. now cannot run what whether on cd dvd. does not even recognize a disc in the drive. real mess

  Hello

  1. What is the accurate and complete error message you get?

  2. don't you make changes to the computer before the show?

  Method 1

  Enable the CD/DVD-ROM drive in the Device Manager.
  a. Click Start, type devmgmt.msc and press to enter.
  b. expand the CD/DVD ROM drives point.
  c. right-click on the sub element and click Activate.
  d. restart the computer and check the result.

  Method 2
  I suggest you try the steps from the following link:

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/982116

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article: back up the registry in Windows 7

• Scanner EPSON Perfection V200 Photo: PDF button does not work since I use the scanner with an ASUS i5 running Win 7 Ultimate desktop computer.

  The PDF button does not work since I use the scanner with an ASUS i5 running Win 7 Ultimate desktop computer. I downloaded the 64-bit Epson software for the scanner.

  I found the solution to the problem, and it is indeed with the revised in Windows 7 Control Panel.

  Here how to solve the problem:
  Go to the control panel in Windows 7.
  Search scanner in the upper search box to the right
  You will see a "view scanners and cameras".
  Click it, you will see the Epson Perfection V200. Highlight.
  Click Properties, then Yes, then events.
  Where it says select an event, you MUST choose the event suitable for each option.
  To the Start button, choose Start the series of creativity
  For the copy button Choose launch Epson Scan
  E-mail button also Epson scan
  PDF includes Epson scan
  There you go.
  Now, all this was not necessary before, there are no instructions, and the fault lies with MS. how much more confused MS will do the control panel?

• I'm running Win 7 (64-bit) and tries to access a printer (HP Laserjet 6 p) on a home network

  Computer on the network where the printer is installed is running Win 2000 Pro.
  Sharing is enabled on both, but cannot print. Troubleshooting utility was not to define and solve.
  Desperately need help.
  Thanks and congratulations to my Savior.

  This should work for you as well as it did for me:
  http://www.SevenForums.com/network-sharing/7527-networking-printer-attached-win-XP-PC-win-7-a.html>

  It is said to Win7 and WinXP, but I was able to use it for a mixed network of WinXP (x 86), Win7 (x 86 & x 64) and Win8 (x 64). I can't imagine W2K is very different, or not at all. My printer is connected to the WinXP machine. If your PC Win7 a driver, there is a Windows Update available.

  SC Tom

• Running Win 7 laptop from Dell. Don't download and run.

  Running Win 7 laptop from Dell.  Don't download and run.

  Cannot run after economy no matter how secure the site. Similarly to listen to Live streaming will not work.

  How to change my desktop under Vista works OK >

  Hello

  This may be the cause of some add-ons to internet explore blocks.

  IE open with no mode of modules have a look on the following article.

  http://Windows.Microsoft.com/en-us/Windows7/how-to-manage-add-ons-in-Internet-Explorer-9

• Error 0xc8000247; Cannot run Win Update in Win 7, also to receive Windows is not genuine Validation Code: 0x8004FE21

  I am running Win7 32 on a Dell laptop. Last week my hard drive failed, I replaced and restoring a backup. Everything works fine, but I started to have a 'not genuine' warning, even if the properties of the computer system is activated. I reinstalled the product key and a message of successful validation. Now, trying to run Win Update, it crashes. I tried to run the system update readiness tool, but received the error 0xc8000247. Read the other threads, I went to install Intel Rapid Storage drivers, but found that I do not run any of the supported controllers. OK, so what I do now? Here is my WGA report. Thanks in advance for any help.

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 0x8004FE21
  Code of Validation caching online: 0x0
  Windows product key: *-* - XHQ2Y - X3WPW-VCB7X
  The Windows Product Key hash: tBMtifFfZCsGzq588qXuuYwSjcU =
  Windows product ID: 00359-032-1673344-85503
  Windows product ID type: 5
  Windows license type: retail
  The Windows OS version: 6.1.7601.2.00010300.1.0.003
  ID: {91DCDF5F-921A-4254-B2DC-24BD03E84287} (3)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Home Premium
  Architecture: 0x00000000
  Build lab: 7601.win7sp1_gdr.120330 - 1504
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: 2.0.48.0
  OGAExec.exe signed by: Microsoft
  OGAAddin.dll signed by: Microsoft

  OGA data-->
  Office status: 114 blocked VLK 2
  Microsoft Office XP Professional with FrontPage - 114 VLK blocked 2
  Microsoft Office Professional Plus 2007-100 authentic
  OGA Version: Registered, 2.0.48.0
  Signed by: Microsoft
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program may Explorer\IEXPLORE.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->
  [File mismatch: C:\Windows\system32\sppobjs.dll[6.1.7601.17514], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppc.dll[6.1.7601.17514], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppcext.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppwinob.dll[6.1.7601.17514], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\slc.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\slcext.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppuinotify.dll[6.1.7601.17514], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\slui.exe[6.1.7601.17514], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppcomapi.dll[6.1.7601.17514], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppcommdlg.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppsvc.exe[6.1.7601.17514], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\drivers\spsys.sys[6.1.7127.0], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\systemcpl.dll[6.1.7601.17514], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\user32.dll[6.1.7601.17514], Hr = 0x800b0100

  Other data-->
  Office details: {91DCDF5F-921A-4254-B2DC-24BD03E84287}1.9.0027.06.1.7601.2.00010300.1.0.003x 32*-*-*-*-VCB7X00359-032-1673344-855035S-1-5-21-1024249394-1781440430-1521716342Dell Inc.. Inspiron 1525 Dell Inc.. A17 20091027000000.000000 + 00084DA3807018400FA04090409Eastern Standard Time(GMT-05:00)03DELL M08 114114Microsoft Office XP Professional with FrontPage1039476F84C4B40044iCnywwNW1w4s9ukTIwGMGxyGic =54185-640-0000025-1788514100Microsoft Office Professional Plus 2007125DEBC7DD788DF10lCnzIRfi avUW2w2o6ODZvLSH3U plus89446-904-3714123-651311

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7601.17514

  Name: Windows 7 HomePremium edition
  Description: operating system Windows - Windows (r) 7, retail channel
  Activation ID: 2e7d060d-4714-40f2-9896-1e4f15b612ad
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00359-00170-032-167334-01-1033-7601.0000-2602012
  Installation ID: 013545669076491633697361629881693535955591004384136513
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  Machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: VCB7X
  License status: licensed
  Remaining Windows rearm count: 5
  Trust time: 17/09/2012 21:00:07

  Windows Activation Technologies-->
  HrOffline: 0x8004FE21
  HrOnline: n/a
  Beyond: 0x000000000001EFF0
  Event timestamp: 9:17:2012 12:51
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:
  Altered the file: %systemroot%\system32\sppobjs.dll
  Altered the file: %systemroot%\system32\sppc.dll|sppc.dll.mui
  Altered the file: %systemroot%\system32\sppcext.dll|sppcext.dll.mui
  Altered the file: %systemroot%\system32\sppwinob.dll
  Altered the file: %systemroot%\system32\slc.dll|slc.dll.mui
  Altered the file: %systemroot%\system32\slcext.dll|slcext.dll.mui
  Altered the file: %systemroot%\system32\sppuinotify.dll|sppuinotify.dll.mui
  Tampered files: Check %systemroot%\system32\slui.exe|slui.exe.mui|COM
  Altered the file: %systemroot%\system32\sppcomapi.dll|sppcomapi.dll.mui
  Altered the file: %systemroot%\system32\sppcommdlg.dll|sppcommdlg.dll.mui
  Altered the file: %systemroot%\system32\sppsvc.exe|sppsvc.exe.mui
  Altered the file: %systemroot%\system32\drivers\spsys.sys

  --> HWID data
  Current Hash HWID: QAAAAAEABgABAAIAAAAFAAAAAgABAAEA6GE + hDgowLJsPLbACiVGg2zMbqwGpJT7ovEgTz524IV2XuyUcBoqhQ is

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0x0
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  REFERENCE DELL M08 APIC
  FACP DELL M08
  HPET DELL M08
  STARTING DELL M08
  MCFG DELL M08
  M08 DELL SLIC
  OSFR DELL M08
  SSDT PmRef CpuPm

  Please start a NEW thread of your choice and include a MGADiag report...

  To analyze and solve problems for Activation and Validation, we need to see a full copy of the report produced by the MGADiag tool
  (download and save to the desktop - http://go.microsoft.com/fwlink/?linkid=52012 )
  Once saved, run the tool.
  Click on the button continue, which will produce the report.
  To copy the report in your response, click the button copy in the tool (ignore the error at this stage), and then paste (using r-click and paste or Ctrl + V) in your response.
  -* in your own thread *, please

  Please also state the Version and edition of Windows cited on your COA sticker (if you a) in the case of your machine (or inside the battery compartment), but does NOT quote the key on the sticker!
  http://www.Microsoft.com/en-us/howtotell/hardware.aspx