Modem ADSL for EA3500

Similar Questions

• XP Pro Modem driver for Satellite A100-233

  can you tell me if there was any work modem driver for A100-233?

  I can't find it in the download section of this site. You kindly help me?

  Hello

  I put t know which laptop model you have chosen, but Toshiba modem drivers are definitely released and published on the page of the driver.

  Go to the download driver of and choose:
  Laptops-> Satellite-> Satellite series-> Satellite A100 (PSAA8)-> XP

  Satellite A100-233 is a part of the series of PSAA8E and therefore, you should choose this number

• Can what comparison be made between time capsule and Smart RG s505 wireless modem router for wifi

  Can what comparison be made between time capsule and Smart RG s505 wireless modem router for wifi

  Superior...

  After all, the chip is mainly a modem.

  Wireless is there but not designed as the primary connection.

  Wireless 802.11n 300Mbps AP with 2 x 2 MIMO Wireless bridge, WDS multiple SSID, including isolated invited SSID WiFi QoS (WMM) and PowerSave wireless security: • Wi - Fi Protected Access (WPA, WPA2) • AES, TKIP, WEP encryptio

  It is the Wireless N standard.

  The TC is dual-band simultaneous AC1750... even if in fact apple never leaves anything use 300mbit on the 2.4 GHz is more like AC1450... It is also 3 streams on both bands not 2 x 2.

  The fact that aid.

  The only thing to note is that a router from Apple can join never a router wireless not apple... so, there must always be plugged in by ethernet.

• Dial-up modem works for a short time, then he said "no dial tone".

  original title: Dial-up modem works for a short time, then he said "no dial tone" does not matter if the modem is to maintain or external. The same thing happens

  Living in an area where the wireless, wifi, broadband is not available, only wheel upwards. Modems worked well for a time, then more nothing. Use xp pro on a Dell computer

  Hello

  1. your phone work when modem says no dial tone?

  2. you have made no changes to the computer before the broadcast took place?

  3. What is the number of brand and model of Modem device?

  Follow the methods mentioned below:

  Method 1:

  Step 1: Run modem diagnostics .

  Note To follow these steps, use the default view of 'Category' in the control panel instead of the "Classic" view

  1. quit all programs, and then close all open windows.

  2 click Startand then click Control Panel.

  3 click on Printers and other devices. Click phone and Modem Options. Click the Modems tab.

  4 select the modem for which you want to run diagnostics on the modem. If you are unsure what modem to select, contact the manufacturer of your computer.

  5 click Properties. Click on the tab Modem Set the Maximum Port speed to 57600.

  6 click the Diagnostics tab.

  7 click Query Modem. If the modem answers and functioning, the information about the modem appears.

  Step 2: Run the Network Diagnostics.

  Network Diagnostics for Windows XP is available to help identify and fix network connection problems

  http://support.Microsoft.com/kb/914440

   

  Method 2:

  How to troubleshoot "No dial tone" issues in Windows XP

  http://support.Microsoft.com/kb/326681

   

  I hope that helps!

• LaserJet 4 Plus: can I use my DSL modem/router for my LaserJet 4 Plus a network printer home?

  My LaserJet 4 Plus was connected to my old XP computer with a parallel port cable (?).  Can I make this printer to my Windows 7 and Windows 10 computers using ethernet cable port to connect it to my ADSL modem/router?  I tried to make the connection, but other computers can't 'see '.  This printer has been used as a network printer in an office environment.  I see an IP address when I print a test page, but I am unable to ping this address of my Windows 10 computer when I have the printer connected to my modem/router.  What should I do to make this visible printer?  Is there a way to check the IP address on the test page is still topical to the printer?  Any suggestion would be appreciated.

  Thank you very much to clear up the mystery as to why the reset cold was not change the IP address and why I was not able to see the MIO menu!  Thank you for the suggestion to replace the card with a card HP from ebay.

• Modem ADSL PIX501 and UK

  Is it possible to interface a PIX 501 directly to a UK ADSL modem? If so is it an example of configuration available. Is he a PIX software release pre - req?

  Hi Alan,

  What you are trying to achieve is possible, if you have an IP address assigned by your ISP for the ADSL Modem interface (i.e. If an IP can be attributed to your ADSL modem, if not then router solution is the way to go) then what you need to do is configure the PIX with PAT (Port Address Translation), in this way all your home addresses will result in 1 public IP (ISP ADSL Modem IP) address. I assume that your facility would be something like this:

  LAN - PIX501 - ADSL (MODEM) - ISP

  Here is an example in this example the PIX is directly connected to the ISP and the ISP assigns a unique public IP address for the PIX, which SHOULD be used on the external interface.

  Here is the configuration that will allow the PIX to use the same IP address on the external interface using the address to make PAT for inside network devices.

  (LAN(192.168.3.0/24) INSIDE_ROUTER(192.168.2.2/24) (inside_e1 192.168.2.1/24) PIX, PIX (outside_e0 199.199.199.2/30)---INTERNET

  PIX (config) # ip address outside 199.199.199.2 255.255.255.252

  PIX (config) # ip inside 192.168.2.1 address 255.255.255.0

  !

  PIX (config) # route outside 0.0.0.0 0.0.0.0 199.199.199.1 1

  PIX (config) # the road inside 192.168.3.0 255.255.255.0 192.168.2.2 1

  !

  PIX (config) # global (1 external interface)

  PIX (config) # nat (inside) 1 0 0

  The foregoing, the nat command specifies that all internal addresses use the pool of addresses configured in the global order for pool 1. The corresponding overall command, but doesn't specify a pool of addresses, but done refers to the external interface. One of the advantages of this method are that if the ISP is not statically assign you the public address, but it uses DHCP to assign the address, you n t need to worry about what the address is assigned finally on the external interface as the parameter of the interface causes the PIX to use the address currently assigned, if it s assigned statically or dynamically.

  Also, when you make changes (as above) do not forget to order 'clear xlate' and also command 'write the memory.

  You can find useful the following URL:

  http://www.Cisco.com/univercd/CC/TD/doc/product/iaabu/PIX/pix_62/config/bafwcfg.htm#37288

  I hope this helps your situation, let me know how you go.

  Thank you - Jay

• modem suitable for airport

  Can someone suggest a modem for airport extreme. Have you tried a draytek 130. Did not work.

  I think you will agree that even if it was possible to identify the best modem in the world for an AirPort Extreme, it would be unhelpful if your ISP (ISP) was not in favour of this model.

  Thus, it would be wise to start with your Internet (FSI) service provider, since most of them will provide a list of modems they support on their Web site.

  Once you have this list... and have reduced your choice... post back with the details and then ask users who use the same ISP to comment on their experience with the modem they use.

• Satellite A100 PSAANE: need of Modem driver for Windows XP

  Hi all

  Please help me
  I have the XP operating system.
  I have not found the Driver Modem...

  Thank you...

  Hello

  I can't believe that! Have you checked the page European driver of Toshiba?
  I chose your laptop Satellite A100 PSANN series starting from the download form and I found the XP modem driver. Again, where is the problem? The XP modem driver is available for you.

  I think you should also take a look at the installation instructions document.
  You will find a driver the installation order that is important!

  Good luck

• Canoe find modem Driver for my Satellite U400 - 12 p

  Hello, I'm tryng to get a modem online driver but I'm not able to find it. I have a toshiba Satellite U400 - 12 p

  Help, please

  Thank you

  Sam

  Hello Sam

  Download page for all the drivers for operating systems that are taken in charge that you can find on Toshiba.
  Your laptop belongs to PSU40E models.

  What operating system do you use?

• Satellite Pro P100-439: sound and modem driver for Windows XP?

  Hello

  I need for my his laptop and drivers for the Modem.

  Thanks for the help

  Edit: I come from Germany, sorry for my bad English. :)

  I presume you bought Satellite P100 and no Satellite Pro P100. Am I wrong?

  In any case, if your P100 laptop is Vista preinstalled laptop, you may have problem because right now all new laptops Vista are not taken WXP supported. Of course, it will take a little time to have drivers of Windows XP Home edition.

• Mobile phone as modem Bluetooth for SP6100

  Does anyone know how to get my K700i to work as a modem for my 6100 SatPro via Bluetooth? What are the settings required on the SP6100?

  Hello

  I did a long time ago, but I'll try to help you.

  1.) entry GSM as modem in the modem list
  Start > Control Panel > phone and modem options > tab Modems > Add
  (I'm not sure but is must be set to 6 COM)
  2.) create a new connection > under step select a device select your mobile phone. Watch all the ISP phone number
  3.) activate the Bluetooth and start Toshiba Bluetooth service Center
  4.) on your mobile phone, you must start option for Bluetooth communication with external devices
  5.), click field glass symbol and try to check the specifications of the region
  Remote devices choose 6). If the mobile phone is listed, try to connect it to 6 COM using the Connect button

  Sorry if I forgot something. It is many years ago I used my mobile phone as a modem.

  Good luck!

• Portege 7020CT Modem Driver for Windows 98

  Hello

  Having had to do a complete reinstall of win 98 I lost my modem driver.

  The one on the site does not work because they are all french pilots pcmcia. It is built in.

  Help.

  Hello

  I found on a Web of Toshiba site we the right modem for Win98 driver.
  Please visit this link:
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_sc_home.jsp

  Good bye

• Need to Win 64-bit XP to fingerprints digital and modem driver for Tecra A9-s9016x

  I installed a Windows XP x 64 system in a Tecra A9-s9016x model and I can't get the fingerprint and intall correctly for modem drivers.
  I need these two pilots and were unable to bring them into the Toshiba support page.

  Any ideas where I can get the drivers?

  You won't find these drivers.

  The 64-bit of Windows XP was not so popular like Win XP 32 bit and the drivers have not been released by Toshiba.
  In some cases, the 32-bit drivers running on 64 bit OS, but if you have already tried to install Win XP32bit driver and if it didn't work then I doubt that your will be able to get this running devices.

• Satellite A500-19 x: no lighting and modem driver for Win 7 required

  My laptop died so I tried to re - install windows 7 and all the drivers for it.
  I could not install the modem driver (?) and therefore can not access internet from him.

  In addition, the buttons above the keyboard light is no longer lit.
  The taskbar are a nasty gray instead of translucent.

  I don't know much about computers and would appreciate any advice :)

  Hello

  The light for the buttons is called Illumination.
  You can enable or disable in the BIOS settings.
  Turn on the computer and press F2. Here, you will find the option of enlightenment.
  Enabled, save the changes and restart the device

  The A500-19 x belongs to the series of Satellite A500 PSAR3E.
  I checked the European driver of Toshiba page and there is a 2.2.97 for Win 7 64 bit modem driver

• X satellite L40-12: need of Modem driver for Windows XP Home edition

  I need downgrading to Windows XP Home edition to my new Satellite L40 - 12 X. For now, Toshiba does not provide driver Windows XP Home edition for my laptop, exept for Atheros Wi - Fi.

  So I found the drivers for each device directly from the only supplier site except for the modem of Toshiba. Vista driver does not work and the list of devices in its .inf file tells that the chipset is Agere.

  On the site of agere, I have not found what I need... anyone can help me?
  Thank you

  Massimo

  I had the same problem on my L40 - 13G. Before installing drivers, you must download and install patch KB888111 and KB835221 for Windows XP. And try to install the XP of satellite L30 drivers (if you have modem with toshiba chipset) or L100 (if you have chipset connexant).
  P.S. sorry but my English is not good - but I hope you understand me :-)