Modem on my M70 laptop problems

Hello

I have mobile M70 - 159. I used it for the dial to connect to internet in NEPAL, but it gave me a lot of hell of problem because it frequently supplier ISP disconnect me and she doesnâ? t connect to standard speed. I try to uninstall and install the driver that help me sometimes, but sometimes not.
I used the same user name and password with my desktop PC which works very well with any problem in speed and it never disconnect.

I have a Marvel as it is the hardware problem that I need to change the modem please suggest me as my laptop is still under warranty.

Hello

Reach:
Control Panel - options phone and modem - Modem - properties - Modem tab.
There you can check if the maximum port speed was set at max.

Well, the modem connection also depends on the ISP provider and the phone line.
I had similar problems using the modem connection. I used different suppliers and someone was of very poor quality. The transfer of data from modem connection was unstable.
I changed the modem to connect to the broadband connection.

Tags: Toshiba

Similar Questions

  • connection via bluetooth to the laptop problems for laptop.error code 0 x 80070057

    connection via bluetooth to the laptop problems for laptop.error code 0 x 80070057

    Best regards: John

    Hello

    -Do you have Bluetooth devices internal or external connected to the laptop?
    -Have you checked if all the Bluetooth drivers on two laptops are very well installed?
    -This work was fine before? If so, what are the hardware/software changes made on the computer before this problem started?
    -Is a problem only when these 2 laptops connecting or is that when you try to connect these 2 laptops at any other laptop too?

    I suggest you to go through these below items that could help you to fix this problem.

    The problems with Bluetooth devices
    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices
    Set up a Bluetooth compatible device
    http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device

    Hardware devices not detected or does not
    http://support.Microsoft.com/GP/hardware_device_problems

    I hope this information helps you!

  • My computer laptop problem every time I open it stops about one hour automatically

    My laptop problem everytime I open fb or youtube time stops automatically, take him to a technician he already change the thermal paste, heat is normal fun to work correctly, we observed 2 hours after putting thermal paste all okey, so I try to open youtube and another browser, subject, and time my laptop again automatically shutdown , is someone with experience already this kind of problem, please share it to me so that I should know what will be I make, I'm looking forward to the help, thank you advanced...

    Hey chichi,.

    There are 2 reasons why this might occur on the computer.

    1. your computer is overheating.

    2. the version of Windows installed on the computer is a BETA version or Windows is not activated.

    Provide us with the following details.

    1. the version of Windows installed on the computer? http://Windows.Microsoft.com/en-in/Windows7/find-out-32-or-64-bit

    2. the full report of the MGADiag tool.

    http://go.Microsoft.com/fwlink/?LinkId=52012

    Run the tool. Click on the button continue, which will produce the report.

    To copy the report in your response, click the button copy in the tool (ignore the error at this stage), and then paste (using r-click and paste or Ctrl + V) in your response.

    3 check the latest event followed in Event Viewer before the computer shutsdown.

    http://Windows.Microsoft.com/en-in/Windows7/open-Event-Viewer

    Browse the Windows logs, Application events (program) and check if there is no error and the last event that was followed before the computer shutsdown.

    Check the options (Settings) of power that are currently in use on the computer. Also, remember to change the power plan and check.

    http://Windows.Microsoft.com/en-in/Windows7/products/features/power-management

    Provide this information so that we can investigate the matter.

  • Installation of the modem for Satellite M70 driver

    Hi all!! I am a newbee...

    I have been instructed by the Support from Toshiba service in Athens to download and install the recent
    Driver files for my Dial-up Modem, which cannot connect to the Internet.

    I am in possession of Satellite M70 series computer Toshiba laptop with Windows XP Home edition operating system.
    I downloaded the mdm - GR - 20080410083448.zip file, but I put t know how to
    the content of the extracted files in order to run the installation.

    Could someone please guide me through this process?
    Looking forward to your kind help...

    Kind regards
    Jesus

    Extract the files to a folder on the desktop and run setup.exe from there.
    Please post the result.

  • Satellite M70-239 - problems with brightness adjustment

    Hello

    I ve got this laptop from my father after I buyed a new. Actually everything´s with him very well. But one thing is a little strange, I think.
    My old laptop and other portable that I had before, has the ability to control things like the brightness of the screen when you connect to load automatically. So not for this one. Nothing happens.

    Windows doesn´t also shows the remaining battery life expectancy and other things like that. These functions are not supported by this guy? I ve installed the latest bios version 1.70, which is available on the official website and I m using Windows XP.

    Someone at - it the same problem and is there a solution for this? Maybe you can help me.

    welcome them

    Hello

    Satellite M70 was delivered with Windows XP edition family, and Windows XP Home typical configuration. I imagine that you have installed all Toshiba tools and utilities, so it must there also have preinstalled Toshiba Power saver.

    He yiou can see profiles of different powers and each of them can be configured separately. Thus, when the laptop is connected to power notebook AC power will be the mode full power. There you can set LCD brightness to the maximum level.
    When the laptop is on battery will then serve others power plan. Compare the settings in two power modes and choose your preferred settings.

    Brightness level can also be changed with the key FN + F6/F7 combination.
    Of course, this will works if all Toshiba tools and utilities are preinstalled.

  • Equium M70 laptop computer only lights battery

    Hello

    This is probably a simple problem and I'm being stupid, but would like some advice. My Equium M70 notebook is about 2 years old and suddenly decided not power without being connected to the electric network. Finally got round to buy a new battery and put in tonight. Still won't turn on so I plugged and charged it... or so I thought. He always says the battery is n/a and only works when it is plugged.

    Any suggestions? Please?

    Muse

    If two batteries are the same problem, then its probably a fault with the motherboard.

    Send the laptop to an ASP for repair.

  • Slow performance HP Pavilion laptop problems

    Very recently, I bought a laptop HP Pavilion. It has Windows 8 and arrived in the mail, no more than a week ago. The first thing I did after that the mandatory installation process was to restore the files from my old laptop (which broke) via ClickFree (currently I have 625 677 GB free) and once that was completed, I installed several programs (office, Vipre, Photoshop, etc.). Apart from that, I did very little about the real hard disk of the computer, since I save everything externally on my ClickFree.

    My problems started occurring rather suddenly, Wednesday morning. In Firefox, I opened a tab for go on Facebook, and scroll the RSS seemed pretty gloomy. I closed the tab, but the slow pace continued in the other tabs, I had opened and then spread to the programs not involving is not the Internet. These problems have worsened gradually.

    On the Internet, the performance is particularly slow. I gave up video players like Netflix, because they freeze the browser to the point of crashing. Page loading is very delayed, even typing this message experiences freeze, despite the fact that I have nothing else running in the browser. There is warning of frequent messages in scripts and plugins does not (although, ironically, these messages are often unresponsive until I finish the script or the offending plugin). It is difficult to do anything on the Internet, such as the loading of pages and tabs of switching may take several minutes. Just clicking can cause the browser to freeze for minutes at a time.

    Off the Internet, programs load extremely slowly, often freezing. Opening files sometimes, with an increase in frequency, translates into a green loading bar at the top of the screen. Sometimes this bar gets stuck and cannot finish, and I can't access the contents of the file; This happened when I tried to open the Panel, to get more specific information about the computer to include in this message. Sometimes programs, such as video players, open without actually playing the video file, or they open at all. Often these programs freeze and sometimes hang; the desktop and the Explorer bar at the bottom of the screen (with the start menu, etc.) are not likely to freeze or disappear, for varying degrees of time. When I came to the computer, CPU utilization averaged about 4-6%, but now he's averaging 40 to 60%.

    Start the computer became too long and hard. The last time that I restarted, I entered my password only to get a completely black screen for at least half an hour; My office and the icons have appeared when I pressed Ctrl-alt-delete. After that, I stopped to turn off the computer (it was not a long time ago). This morning, I opened the laptop to connect, but received only a "Please wait" while the computer has tried to load the login page. It took 10-15 minutes, and then I was finally able to enter my password.

    These issues are getting worse, and I'm sure I'm forgetting several, but I think that what I've included enough to illustrate my problem. This is a new laptop, but it works almost as bad as my old laptop, which became unusable recently and had to be replaced with this one. I can't imagine what is the cause, but I really wish she was fixed. I installed a program called Fix - It Utilities (the installation disk supplied with the notebook) to try to improve the performance of the laptop, but to no avail. Any help would be greatly appreciated.

    Hello ValentineKills. I understand that the computer is slow. I will do my best to help you!

    This can be caused by a hardware failure or a software/driver/virus conflict. However, we won't know until the diagnosis is made.

    I'll provide a few official documents that provide information on how to speed up the computer. I want that you follow all the steps in all documents. In this way, if the problem exists, it will restrict the root cause. Here are the documents that I want you to try:

    http://support.Microsoft.com/kb/2746761

    http://support.HP.com/us-en/document/c03460887

    Since you're under Windows 8, I have a further suggestion: complete all updates to Windows, and then upgrade the computer to Windows 8.1. While the operating system is upgraded, try to use the computer and see if the speed is any different.

    Please reply when you have finished troubleshooting. I'm only here to help!

    Mario

  • Satellite M70-190 - problem with USB

    Hello!
    After you uninstall Windows XP and BIOS update, I have a problem with the USB ports. My work does ' t of USB flash drive. Windows also find a USB flash drive, but I can't find it in "my computer".
    If anyone idea about this problem?
    PS, External HARD drive works perfectly, as the USB mouse and USB WiMax modem.
    I m hoping someone out there can help with this problem.

    If I understand you well you don't have problem with USB port, but with a single USB device. Right?

  • Driver for HP 2170p laptop problems

    Hello

    First post on this forum

    I'm decided to sell the 2170p my gf and proceeded to do a clean install of Windows 7 Pro 64 bit last night and then used other software to attempt to clean the SSD drive.

    Unfortunately, once this process is finished, I noticed that there are a lot of drivers who are no longer present. (Serial Bus Controller, controller of network among others).  I have downloaded the pack of HP driver that would not install correctly and when in Device Manager, the drivers section would not allow me to update or provide details that the drivers are really needed. (They all had an exclamation point). I also noticed that all the HP software standard that appears usually with the laptop disappeared.

    Is there a documented process to get back it, so it is in a similar State to the way it was originally purchased?

    Thanks in advance.

    Update: I found a way to solve all my problems

    By pressing the escape of the splash screen to enter the start menu, and then using F11 to recover HP. Once that windows has been installed again, it's back to the factory settings.

    Many thanks to those who offered help

  • Tecra 8000: xircom realport modem cem56G-100 lan install problem

    Hi, I have tecra8000 win98 on which I'm trying to install a xircom realport cardbus modem. I downloaded of updates (always available) on the site of intel as well as of the last update of the firmware to resolve installation problems. None of these helped to solve the problem that I encounter, for example, it seems that my xircom is not accepted (windows cannot install the adapter) and on reboot I get a message that the card does not work correctly. Also, I can not select the realport modem card from the adapter list because she isn't here. each index or tip is welcome thanks in advance
    Stephaan

    Hi Stephan,

    Is the latest version of the driver 2.70.01.00?

    Can you please check in the properties for your modem under device status if there is a message (for example Code XXX).

  • Modem on a Satellite A60 problem

    Hello

    I need a little help. Normally, I connect to the Internet using a cable modem. But I must also be able to fax from my pc and sometimes connect using a dial-up modem.

    And that is the problem. The internal modem in my machine refuses to recognize the tone and pointed out that there was one every time. I heard a loud noise from the speakers, then only beeps as it tries to establish a connection and fails eventually.

    Control Panel, everything seems OK... modem on COM3 is turned on. Change the COM port has no effect. Changing the setting 'pending tone' has no effect. I even disable all firewalls and antivirus, always without any effect. And of course, the cable is perfectly OK, too. This has been verified by plugging another phone and use it with another computer on the same telephone line.

    So, I want to know is if there is something I'm missing or do I have a problem with my machine?

    Help, please

    Thanks in advance,

    Iain C

    Hello

    I found a modem installation procedure at the net, maybe it helps you solve your modem!

    1. check if the modem is entered in the Device Manager
    2. check if the modem is configured and that it works?
    The Control Panel must be open and go to the phone
    options of modems and. It should be your modem!
    If it is not shown to you, then you must install the
    modem driver.
    3. double-click on modem and go to the Diagnostics. The
    modem query button queries the commandments with
    check the return signal. This will give you some additional information
    the modem works properly.
    4. then set up a standard dial-up connection to your
    provider of
    5. go in the properties of the modem (Device Manager) and the
    Check the brand in the "wait for dial tone before dialing" has NO
    been resolved!

    I have an A50 and had also some problems when I set up my modem connection! After a short period of trying to set it up, I make it work!

    Hans Bye

  • Satellite M70-309 - problem with touchpad

    Hello

    I have a problem with the touchpad of my laptop. When the laptop is charging, touchpad not working properly but if I unplug it work.

    What is the problem? I don't understand...

    I thank.

    Hmm when did you notice this problem?
    Since the first day of purchase?

    I'm not very well if it could be a software problem, but of course, you could try to update the driver for the touchpad to ensure that this problem related isn t touchpad driver m.

    If the driver update help doesn t then a hardware problem may be possible
    It is hard to say what role might be affected but a laptop computer technician could run tests and might be able to tell what's wrong.

  • HP ENVY - 17 t Touch mobile: slow performance HP Pavilion laptop problems

    Good afternoon:

    You see, around a month ago I bougth this laptop to a HP USA Store, these are my specs:

    Windows 10 Home 64-bit

    Intel core i7 5500U Dual core processor 2 .4GHz + NVidia Geforce 940 2 GB graphics card

    17.3 inch touch screen Full HD

    HARD 1000 GB DISK

    16 GB of RAM

    So I have this massive problem since the first day. This laptop is so slow that it same crash when I try to open a file from a USB (and for the record, my usb memory is good) so you can imagine my fight with her. I don't know why this is happening. Hope to hear from all kinds of information that can help me through this.

    Good day.

    cpuello

    Your System Page

    HP computers - increase the performance of the system

    did you update?

    new mei driver

    http://ftp.HP.com/pub/SoftPaq/sp72501-73000/sp72683.exe

    new driver for IO series Intel

    http://ftp.HP.com/pub/SoftPaq/sp72501-73000/sp72681.exe

  • HP 15 laptop: problem with the touchpad and the key "stuck."

    Hello!
     
    Last weekend, I have an irritating problem with my HP 15 laptop. Bought two years ago and upgrades to Windows 10 a year ago.
     
    First of all, my touchpad started to not work properly. It "freezes" and I can't use it until I click the ESC key, but it doesn't last and "freezes" again a few seconds later. Then, everytime I open a window where there is a text box (Start menu, edge browser, Control Panel, etc.), the number 5 is entered automatically and permanently, as if the button 5 has been blocked. I did a quick check and button 5 do not seem physically stuck.
     
    Yesterday, I restored the system to the factory settings, so I'm back to 8.1 for Windows and then upgraded to Windows 10. Everything seems to work fine, but this morning, the problem was back. Is there something I can do? What is the problem caused by Windows 10 or the computer? Should I restore it to Windows 8.1? Everything worked great til last weekend, I don't know what that was.
     
    Thank you in advance for your help!

    Welcome to the HP support community @gouch3.

    I understand that you have a problem with the keyboard and the touchpad on your laptop from HP 15.

    Have you tried to use a keyboard external and mouse at all?

    Have you tried to go to Safe Mode to see if the problems persist in there?

    Have you tried to perform a material or forced reset Reset?

    Did you do a test of material?

    Have you updated your drivers?

    gouch3 wrote:

    ... Is there something I can do? What is the problem caused by Windows 10 or the computer? Should I restore it to Windows 8.1? Everything worked great til last weekend, I don't know what that was.

    It could be a driver problem to be able to look at that for you, I need your model number. I wish I could give you an answer or not, but at this point without the troubleshooting results and the model number, it is difficult for me to say.

    I can say that if everything works in point 8.1 of Windows without problem, the driver TROUBLESHOOTING is a great place to start. Please try to follow these steps for the keyboard and the touchpad of troubleshooting:

    • Beginning
    • Search for Device Manager
    • Search results, open Device Manager.
    • Click on display
    • Show hidden devices.
    • Click the arrow next to keyboards.
    • Right click on the name of the keyboard device.
    • Select uninstall.
    • Continue deleting the names of devices in the category keyboards until the feature of all the names have been uninstalled.
    • Restart the laptop twice.

    Touchpad:

    • Type of research, "Device Manager."
    • Click on Device Manager,
    • Expand mice and other pointing devices.
    • Right click on the TouchPad,
    • Click on uninstall.
    • Restart the computer laptop twice,
    • Reinstall the TouchPad card.

    I found a document of troubleshooting for you to try also called Portable keyboard troubleshooting. Please be sure to follow the steps described in this document.

    The best document I have for TouchPad problems is the use and troubleshooting of the TouchPad and ClickPad document. 

    Here is a link to the HP Support Assistant, if you need it. Just download and run the application and it will help with the software and drivers that need to put up-to-date.

    This is a great question other clients may also be questioned. When we came to a resolution, please share what has worked for you with others by marking this post as an acceptable Solution. If you want to show appreciation for my efforts today, please take a second to click the Thumbs Up button below.

    If you need assistance, I would be more than happy to continue to help you. Please re-post with the results of the resolution of the problems. Could you please also provide your model number (How can I find my model number or product number?)

    Thank you!

  • computer keyboard laptop problem some keys

    Laptop: compaq presario cq62 core i5

    recently, some of my keys are are unresponsive or work when I press them. I have not spilled or left my laptop falling, but all of a sudden, my backspace,------, and various enter key will not respond when I try to use them. It is very annoying to not be able to use my back bar and it's bugging me! I tried my laptop for virus scanning, but nothing was found. I'm not sure if it could be a problem of circuit or something, but I need to fix, as soon as possible because I need my laptop for class. Help me please if anyone knows what may be the problem!

    Thank you!

    I guess it's a problem with the keyboard...

    the only thing you can try is to open your laptop and connected to search if the keyboard cable is always good, otherwise, you can install a new keyboard...

    recently, I had the same problem with my laptop, when I discovered that the display cable was not well connected...

Maybe you are looking for

  • Classic game "astral world 2000"?

    Greetings, In the year 2000 and 2001, I used to enjoy a game called Astral World 2000, I think.  It was a "browser" abstract game requiring a connection through the web and the annual subscription.  Certainly, he has closed its doors and off the serv

  • Highlighting of certain parts of the Web page for printing

    I have a problem highlighting items to save to a file for printing of Web pages (specifically the text). If I pressed the left mouse button to highlight the text, the page is not auto scroll where the text is off the screen. An example is here: http:

  • Problem in Skype worm 7.18.0.112

    I had a previous worm of Skype works well with my laptop with Windows 7 OS. Recently, I had to reinstall the operating system Windows 7 and when I when I downloaded Skype, worm 7.18.0.112 downloaded. Download & install was smooth, but when I try to u

  • 11 - r010 Cloudbook flow: flow 11-r010 Cloudbook: RTL8723BE low power with Linux

    I took delivery of a stream 11-r010 Cloudbook with Windows 10.  I'm a Linux guy and found that the basic RTL8723BE WiFi card plays well with all major Linux distributions.  Everything else works.  I see this in the maintenance manual part number is 7

  • Generation and acquisition of analog signals simultaneously on USB-6212

    Hello, I am novice programmer DAQ trying to create (what I think is) something very simple. I use a box NI USB-6212 and LabVIEW 8.5 is trying to generate a pulse train analog while recording a simultaneous analog input. My first question is, is it po