Modem router connection problems

Hi all

I am replacing a belkin n600 with router linksys ea6350 router. The modem I have is a Motorola Surfboard SB6141. The belkin router connects perfectly to the modem, but when I try to connect the linksys router to the modem, the light on the router keeps blinking and will never get me connected to the internet. I even tried to connect the linksys router to the router belink when the belkin is connected to the modem. I still don't get any kind of service. Thought it was a bad router and it took for my current home to connect to my modem At & t and it worked very well and I was able to put everything in place. For some reason I don't know why the linksys connects very well with the modem at & t, but not the motorla modem and the ISP that I have in my apartment is Comcast. It does not any sense and I'm heading home in a few days and I really need this connected linksys router belkin router is just too slow. Please I need much help getting this linksys router to communicate correctly with the motorola modem. Also, I used both crossover and straight cable modem to see if that makes a difference and does none of this and I know use cross to connect to the router.

first of all, make sure that the port on your pc is enabled.  usually, if you enable wifi it disables the ethernet port.  before you turn off the modem and do a factory reset on the router into the RED reset button until the lights on the router are flashing.  Turn the power off and wait 10 seconds then plug it back.  During its initialization connect a straight cable between the pc and the router's lan port.  Also, connect a cat5e or cat6 from the wan port on the router to the modem.  wait until the router finishes starting, and if she opens a browser in itself and then open a browser (ie to try) and put 192.168.1.1 in the address bar.  You should get a connection.  Let the empty user and enter "admin" for the password.  Or if it opens the programme of assistance to load the router you can follow if you wish.  This should get you.

Tags: Linksys Routers

Similar Questions

  • New router connection problems

    So I just got a new router delivered to my cause of House, that we had to move to a new location, and that we have obtained will not let me connect to the internet via a modem-> router-> computer.  It works very well when connecting with the computer of my brother through wireless. When wired to the router I get full connected via the internet and so on, but when it comes to my computer wireless router, do not let me go beyond "local only". He remains as unidentified network and can't get more than that.  Ive tried to restore my computer to Service Pack 1 and remove Norton from my computer with the removal tool and nothing seems to work. Ive changed my setting of the router mode 50MBPS and stuff and nothing, defining the network IP and DNS in my Protocol which is in my router and that did not work either, my IP address restarts and refreshing, nope. Im running Windows Vista Home Basic with an Atheros AR5007 802 network card. 11b / g. router Netgear WNR1000v2.  I had a problem with my computer with my last router.

    It's my connection information:

    Microsoft Windows [Version 6.0.6001]

    Copyright (c) 2006 Microsoft Corporation.  All rights reserved.


    C:\Users\***>ipconfig/all


    Windows IP configuration


    Name of the host...: *-PC

    Primary Dns suffix...:

    Node... type: hybrid

    Active... IP routing: No.

    Active... proxy WINS: No.


    Wireless network connection Wireless LAN adapter:


    State of the media...: Media disconnected

    The connection-specific DNS suffix. :

    ... Description: Atheros AR5007 802. 11 b / g WiFi adapt

    Physical address.... : 00-24-2B-C8-1A-21

    DHCP active...: Yes

    Autoconfiguration enabled...: Yes


    Ethernet connection to the Local network card:


    The connection-specific DNS suffix. :

    Description...: Realtek RTL8102E Family PCI - E Fast Ethern

    and NIC (NDIS 6.0)

    Physical address.... : 00-1F-16-70-E0-A5

    DHCP active...: Yes

    Autoconfiguration enabled...: Yes

    Address IPv6 local link...: fe80::a85c:6ec9:2 has 4: bbf5% 10 (Preferred)

    IPv4 address: 192.168.1.4 (Preferred)

    ... Subnet mask: 255.255.255.0.

    Lease obtained...: Monday, November 29, 2010 14:29:05

    End of the lease...: Tuesday, November 30, 2010 14:29:05

    ... Default gateway. : 192.168.1.1.

    DHCP server...: 192.168.1.1.

    DNS servers...: 192.168.1.1.

    NetBIOS over TCP/IP...: enabled


    Card tunnel Local Area Connection * 6:


    State of the media...: Media disconnected

    The connection-specific DNS suffix. :

    ... Description: isatap. {E418D763-0DB4-4DCA - B 9, 70 - E94D132E8}

    62 A}

    Physical address.... : 00-00-00-00-00-00-00-E0

    DHCP active...: No.

    Autoconfiguration enabled...: Yes


    Card tunnel Local Area Connection * 7:


    State of the media...: Media disconnected

    The connection-specific DNS suffix. :

    ... Description: isatap. {F2AFB4E5-A1E8 - 415 B-A7B3-A433B3227}

    715}

    Physical address.... : 00-00-00-00-00-00-00-E0

    DHCP active...: No.

    Autoconfiguration enabled...: Yes


    Card tunnel Local Area Connection * 11:


    State of the media...: Media disconnected

    The connection-specific DNS suffix. :

    ... Description: Teredo Tunneling Pseudo-Interface

    Physical address.... : 02-00-54-55-4E-01

    DHCP active...: No.

    Autoconfiguration enabled...: Yes

     

    Any help would be appreciated.


    Well, I tried everything you listed on here and nothing seemed to work. I found a good solution to change my WEP security and he recognized her. Looks like it has problems with the other encryption security. Thanks for your help though!

  • E3000 router connection problem when I use the telphone

    I plugged my router through my telphone line. When I use my telphone, I can't connect my computer to my router. When I see the available wi - fi networks available, my router does not see. As soon as I get off my phone, I can see my router and able to connect. I thought that my router has two bands and I'll be able to use it. I'm not a geek.

    Help, please. Thank you

    Why is your router connected to the phone line?

    It must be connected to a DSL Modem or a Cable Modem (assuming that the release for consumption).

    Need information in order to determine the question.

    Is your wireless phone a DECT 6.0, 2.4 GHz or 5 GHz?

    I changed my DECT 6.0 wireless phone because they do not interfere with wireless 2.4 GHz or 5 GHz. older phones use the same frequency as the network and can interfere.

    Why so your router on a telephone line?

    How often your mobile phone works on?

  • Factory reset wireless router connection problems?

    Hello

    I recently did a factory reset on my HP6745f desktop running Win7 sp1 and I don't know if my problem is with HP or Linksys/Cisco (my router). I already contacted the support Cisco who reported the problem seems to be "a matter of HP, a corrupt driver or other third-party issue" and then offered to help, for a price. I'm hoping to avoid that if possible.

    This office computer is directly connected to the router via an Ethernet cable. Cisco software was that I want to install that 'control' of my router (called Cisco Connect) and when I try to install the software, I get a message saying: "We could not find your router" (that's why the software will not install) - although I am accessing internet through that router. Even if I try to enter my network name and the password, it cannot find anything. I am also unable to access the router via my browser "168.198.1.1".

    I am unable to connect wireless with the same desktop so, my 2 wireless laptops have no problem of connection at all, which leads me to believe it's something specific to my desktop pc.

    The Cisco Connect software has already been installed on my desktop and it worked fine. I guess my question is: someone has any suggestions for me? This could be a driver problem? How can I identify what (s) for 'check '?

    Any help would be greatly appreciated.

    I thought about it! My router can use a "network key" to connect other computers to the router. I guess when I reset my pc all this info has been removed and the router could not communicate.

    I have just created a network key on a flashdrive USB of my laptop, plugged the USB in my office and hop, I reconnected properly. Thanks for the suggestions, I really appreciate the help.

  • Router connection problems

    Hello
    So I'm having a problem, very frustrating to connect to my router. I can't connect to my router using the ip or routerlogin.net address after a certain period of time. If I restart my router, I can connect without any problems, do everything that I do and everything is fine, but it seems that after a while, can I connect my router delay and then I go to the page... I get a "This Page is not available" in Chrome.

    I tested with Chrome, Firefox Safari (on Mac and PC, 2.4 and 5 ghz connection, as well as directly connected to the router). I also tried the same settings on an IBM computer, including using IE

    Internet seems to work very well, (I can even ping the default gateway), but whenever I create a new virtual machine on my test server, I need to assign a static IP address and need to connect and hate that I have to keep rebooting my router must.

    Y at - it a setting or something escapes me?
    Thanks in advance for any help.

    Hi Andy -.

    Hard reset seems to have worked. Thank you!

    For the curious:

    The first thing that happened the router would be looking for another router on the network. Have not found an and proceeded to reset the router to factory specifications.

    Once that came, I restored my previous settings that I saved while I still had access to the router.

    Always curious, he has established for the last month when I tested my olde 3700 (who, by the way, works fine behind a router AT & T in my other House - and a lot more range and speed than the AT & T.)

    -Chuck

  • Pavilion dv4-2160us with Atheros AR9285 and D-Link WBR-2310 wireless router connection problem

    NB sometimes has problem connecting to the router. This occurs when the NP is booted from power, or when the connection of power mode after about a day of economy since his last connected. Although the network sharing Center sees the network to connect to, but shows only "restricted access". But if the power to the router is recycled, then the connection is established. The driver for the Atheros AR9285 is up-to-date. The firmware of the router is the latest v1.05.

    A test ping Google permanently on the NB and a computer that is connected to the router to isolate the problem. Whenever Google is ping successfully, it displays a message and the response time in milliseconds. If the ping fails, the message will be "Ping: transmit failed." General failure. "  It turns out that, while the test on the wired computer worked without a hitch, the NB has shown that at the same time, the internet connection was lost during the time of connection. He then recovered after a few 'pings '. At another time, the internet connection has been lost permanently without recovery, also during the time of connection.

    Anyone has the same problem?

    After changing the security mode WPA2 to WEP router wireless, the problem seems to have disappeared. It's been 3 days and the computer can still make the connection to the router. HP support says that HP wireless network adapter works best with the WEP security setting.

  • Router WRT320N to a wired BEFSX41 router connection problem

    Hello, I never thought it would be so difficult. I have problems to connect to a router (WRT320N) so it will be on the same network as my other cable firewall router (BEFSX41). The wireless router works fine because it connects to the internet via the BEFSX41 router. However, the two routers do not see each other and I can't connect two computers, a wired computer, the other laptop wireless to the same network.

    Wired BEFSX41 router uses 192.168.1.1 IP address and the router WRT320N wireless uses 192.168.0.1 IP address.

    Don't know what other information you need. I hope you can solve this problem for me.

    Thank you

    Mike

    For file sharing, it is always better to maintain the network in the same subnet... Connect the BEFSX41 on the Ethernet Port of the router WRT. (LAN-to-LAN connection)... Visit this link for that. If the IP address of the main router is 192.168.1.1 then, change the 2nd router's ip address is 192.168.1.2.

    Make sure that file and printer sharing is enabled... Also, make sure the computer are in the same workgroup...
    Default workgroup in Windows Vista has been renamed to WORKING group. In Windows XP, the default workgroup name is MSHOME...

  • PROBLEM CONNECTING TO A MODEM/ROUTER TO COMCAST

    My husband is trying to connect to my laptop to WORK FOR our COMCAST Modem/Router (IPV4) House.  There is a link between the laptop and the modem/router.  However, I can't get out to the internet WIRLESSLY and need to use a WIRED CONNECTION.  He did an audit of the IPCONFIG command AND maybe he thinks running IPV6 as we do at work.  It's what the IPCONFIG/all command shows:

    IPv4 address: 172.X.X.20 (preferred)

    Subnet mask: 255.255.0.0

    DHCP SERVER: 172.x.x.1

    IAID DHCP: 2255216532

    DHCPv6 Client DVID: 15-digit number

    Is that mean that the computer is configured to run on IPV6 instead of IPV4?  My husand does not have IPV6 on our home network?

    He doesn't have SYSADMIN access, is there a way to fix this without sysadmin access?

    Leticia

    Hello Leticia,

    Welcome to the Microsoft community.

    What is the brand and model of your computer?

    Launch us network troubleshooting utility in Windows 7 that allows anyone to diagnose and fix network problems.

    Using the troubleshooter from network in Windows 7

    http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

    Make sure that all network drivers are up-to-date. You can follow the steps in the article below.

    Automatically get recommended drivers and updates for your hardware

    http://Windows.Microsoft.com/en-us/Windows7/automatically-get-recommended-drivers-and-updates-for-your-hardware

    More information

    Wireless and wired network problems

    http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

    Hope this information is useful. Feel free to get back to us if you need further assistance.

  • Apple TV cannot connect to Modem/Router C7000

    Hello

    I'm completely stumped on this, this is no logic.

    I upgraded a Netgear WNDR4300 wireless router to the modem/router combination C7000. The old router never caused any problems with the connection of wireless devices, but this new C7000 is frankly a pain!

    I agree with Apple TV network and the password is accepted, but no matter what I do the router never sees the Apple TV as a connected wireless device!

    Yet once, it worked flawlessly on the old Netgear router.

    The other two devices wireless I have connected the two had WPS (a printer and a device), but the Apple TV does not support this so I get the password manually but it simply refuses to work!

    I was wasting hours on this today.

    I'm a software engineer so I understand this and frankly there is no earthly reason, I can see why he just refuses to work.

    Y at - it a bug with this modem/router C7000 that will not work properly if you cannot connect using WPS?

    And what is the problem of not having a FW upgrade option in this device?

    This FW version: V1.01.20. Is this the last?

    Help, please.

    Thank you

    Allen

    Well, now I feel like a fool. I unplugged the old router and thought that I had turned it off, then I drop it on the floor and began setting up the new router. I wanted to keep the same network name so I changed it and set the password accordingly.

    It's when I couldn't connect the Apple TV. And after all that, I look down the OLD router and to somehow do NOT turn it off as I thought I did.

    If the network name being the same, my Apple TV connected to the OLD router instead of the new.

    Argh, what a rookie mistake!

    Everything is OK now.

    Sorry everyone,

    Allen

  • E2700 cannot connect directly to the modem, but connects via another wifi router?

    I have a Netgear WNDR3700v2 that I was very pleased until I had a nest of thermostat. Apparently it's a router not supported and I had to change it. I bought an E2700 since he took charge, but I have a huge dilemma...

    If I connect the linksys directly to the modem, I don't get an internet connection. I got out and renewed IPs without success...

    But if I wired the linksys for the netgear, I get a good solid internet connection. problem is, I have no need for installation of 2 routers on top of each other...

    any suggestions? I would like to know what kind of information you need.

    Basically, I do not understand why he is not able to connect directly to the modem to linksys. Yet, it becomes solid connection wired through another router.

    I use Comcast and South FL. it is motorola surfboard modem

    OK, found the solution.

    call 1800COMCAST

    go to the problems of the internet, there is an option to send a refresh signal to your modem.

    I did, and it started working. I guess that clears the memory and binds to the new MAC address...

    After that I did, internet is back. I hope this will be useful to someone. I was ready to return the dang thing.

  • Linksys BEFSR41 connection with modem router getting not real internet ip

    Hello, can someone help with this problem. I connected to a modem router linksys BEFSR41 router. But when I watched the status in linksys BEFSR41 router, it gives only an IP from the modem router and no real internet ip address.

    can someone give me an answer.

    Thanks in advance.

    Don't string two routers. Fill the modem/router or don't use the BEF as a router, but only as a simple switch (or replace it with a standard ethernet switch).

  • Unable to connect with the modem router e2500

    I have an old Speedstream 5100 modem hooked to my router e2500. Everything works well except if for any reason any my modem disconnects from the ISP I can not log in via the route to reconnect it. I need to connect a cable modem to computer direct run connect script then modem plug in router all is well again.

    Any ideas why the connection to the modem router is blocked?

    Thnaks,

    Al

    al_mathews wrote:

    My Speedstream has only an Ethernet connection so I did not know that he resembled a router for the local network. I changed the mode of bridge on the PPoE configuration on e2500 / Speedstream and reconnected to the ISP on the e2500 configuration screen. Who can solve the problem of reconnecting from now, it is run on the e2500.

    One thing I see now is since I left the modem IP set to 192.168.0.X can't do it all through the e2500. Is it because my DHCP in e2500 is configured with 192.168.1.X range IP modem is not covered in my network? If I directly connect Speedstream and place you IP 192.168.1.X will become visible on LAN?

    You are unable to access the modem even if you have a PPPoE connection. For PPPoE the E2500 will not need an IP address from the modem so it does not have DHCP on WAN port and so we never see. When you try to access the address of 192.168.0. * the E2500 it will route through the tunnel PPP to the ISP.

    If you connect your computer directly to the SpeedStream it should automatically get a DHCP address (assuming that the computer is still ongoing on the DHCP protocol and not with a static IP address and the SpeedStream does not automatically neutralize the DHCP server in Bridge mode). If you have configured a static IP address on the computer, you must change the IP address to an address of 192.168.0. *.

  • a router and a modem to connect together, but the computer said two drivers

    I want to get my wireless to the top quick cuz his bull press

    Hello

    We really need more information and description of the problem other your wireless network does not work.

    How to ask a question
    http://support.Microsoft.com/kb/555375

    ----------------------------------------------

    Cable or another modem - router - wireless connection on computer?

    Restart the computer to clear any corruption.

    Setting up a network home
    http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-home-network

    Home network, wireless network and computer networking Made Easy
    http://www.home-network-help.com/

    Windows Vista tip: How to install and connect to a wireless network
    http://www.watchingthenet.com/Windows-Vista-tip-how-to-Setup-and-connect-to-a-wireless-network.html

    Networking tutorial home
    http://www.tehnomagazin.com/computer/home-networking-tutorial.htm
    Practically networked - everything you could possibly want to know.
    http://www.practicallynetworked.com/

    Also check with the site of the manufacturer of your router because they generally excellent help on the spot.

    ============================================

    To solve the problems of the network:

    Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I have
    would update your WiFi drivers on computers. How you are positioned in the router?
    Are there obstacles in the path?

    Actually try updating your driver and disabling the network logon.

    Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver-
    Note the version - click on update driver (can't do anything as MS is far behind certifying)
    drivers). Then right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver
    stack.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    Download - SAVE - go where you put it - right click – RUN AS ADMIN.

    You can download several at once however restart after the installation of each of them.

    After watching the system manufacturer, you can check the manufacturer of the device an even newer version.
    (Those become your fonts of rescue system manufacturer).

    Repeat for network (NIC) card and is a good time to get the other updated drivers Vista
    love the updated drivers.

    I would also turn off auto update for the drivers. If Windows Update suggests a just HIDE
    because they are almost always old, and you can search drivers manually as needed.

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    ------------------------------------------------------

    Make sure you know the details of connection to your wireless router - SSID and password.

    You lose connection when you do and have to redo your logon.

    Control Panel - Network & Sharing Center - right, click Customize - define the network locations
    page - down left click on merge or delete network locations - REMOVE all instances of your network
    (and all the others you no longer use)-RESTART. Start - Connect To log on to the network.

    -----------------------------------------------------

    Check this box:

    Strange problem with Internet under Vista
    http://www.catonett.com/blog/archives/194

    Windows Vista cannot obtain an address IP of certain routers or from certain non-Microsoft
    DHCP servers
    http://support.Microsoft.com/kb/928233/en-us

    ----------------------------------------------------

    And:

    Network connection problems
    http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • Problems with AirPort Extreme and Qwest Modem/Router.

    I have a Qwest ActionTec 1000 DSL VDSL2 gateway and want to disable the functions of router wireless and those through direct AirPort Extreme. I know that in the Modem I have to disable the functions of addressing and turn them in the AirPort Extreme to avoid address conflicts, but what are the settings I need to change in both devices? And what is "A Transparent bridging" on the side of the modem?

    But what are the settings I need to change in both devices?

    Sorry, we can't help on the settings for the modem/router, because it would be a question of Qwest as to if this is even possible and if so, if Qwest will support this type of installation. Sometimes the ISP lock modem/router settings, and although it seems as if you can change the basic configuration of the unit, you can really.

    Yes, it is possible that another user of Qwest has done with the same modem/router you have and an AirPort Extreme... and may know the answer... but the chances of the person who holds this information also to see this post are slightly above zero. But, I guess it's possible.

    If the modem/router can be configured to operate only as a simple modem, then the next step would be to get your Mac connected directly to the modem to test the connection in this way. If Qwest is going to help you, they will do it no doubt with your Mac connected directly to the "modem" as well.

    Once you know the exact details of the PPPoE authentication to establish a connection, these parameters can be transferred to the AirPort Extreme and removed from your Mac. To do this, you reset the AirPort Extreme back to default and then put settings in place again. The installer should detect the PPPoE connection and then ask for your login information.  After this, the correct settings apply to AirPort Extreme during the installation.  You can still use the same wireless network name and password you used before if you wish, or set up a new network name and password.

    PPPoE on the routers of the airport, at least in my experience, was not a reliable way to connect when I tried this in the past, but you don't really know how well... or even if... it will work until try you it. Unless you really want the airport to distribute IP addresses to devices on your network, things would be a lot more simple if you went ahead and used the modem/router "such what" and then let the airport works in Bridge Mode to transfer information in connection with network devices.

    When you have the modem/router converted to act as a simple modem and made a successful connection using your Mac connected directly to the "modem", post back and we can help with the configuration of the AirPort Extreme if you need more advice.

  • Connect AirPort Express to lemon (Rogers Rocket) Wireless Modem/Router

    I just got Rogers Wireless internet new modem/router Hitron.  I use modem/router mode.  It's great. Very fast and a lot of range. Covers all 3 floors of my house.

    I want to connect an Apple Terminal to my Hitron router with an ethernet cable and put the Hitron in Bridge mode. I want to continue to use the Hitron router as my main and only router.

    However on another floor, I would use an Apple Airport Express connected to my stereo with a jack 1/8 '' to play my music wirelessly from my iTunes from Apple.

    To do this, I need this Apple Airport Express Terminal to 'find' the Hitron router.  How can I get to find the router Hitron?

    I guess that you have a current version or recent of the AirPort Express with the default settings.

    As long as the AirPort Express is located where it can receive a strong signal of the modem/router...and wireless Hitron the Hitron aircraft provides a wireless signal that uses industry standard wireless settings, the AirPort Express can 'join' the wireless network. Wired Ethernet is not necessary.

    Note that the AirPort Express will not "spread" or "repeat" the signal from the router/modem lemon to provide additional coverage of wireless signal wireless, but it can be used to join the wireless network and provide a signal of airtime for your stereo.

    Simply use a Mac running a current or recent operating system, or an iPhone/iPad and configuration "Wizard" Apple to set up things upward. The wizard will automatically offer the correct configuration to 'join' the wireless network. All you really need to do is to enter a device name that you want to use for the AirPort Express and the password of the wireless network and confirm.

    Start the wizard by clicking on AirPort Express under the title of the new AirPort base station.

    On an iPhone or iPad, the screen looks like this:

    In the example below, the wizard has detected a network named "2WIRE902" for the AirPort Express join. You will see the name of the wireless network that provides the Hitron modem/router on your screen. Just enter a name of device for the Express, then type the wireless network password, then type it again to verify.

    Click next at the bottom right of the window and the AirPort Express displays a green light for a minute or two and you're done.

Maybe you are looking for

  • Windows Vista to Windows 7 upgrade is free?

    Currently I use windows vista home basic 32-bit 6.0 version (Build 6002: service pack 2). can I update this version in Windows 7 FREE? Thank you.

  • computer upgrade help!

    Hi, I turned on my computer crashed the other day after I thought the motherboard and for some reason any it started working. I wanted to update that it is a play on this computer and I need to know if the things to put in it, I chose will be form an

  • Can't update firmware on WAP2000

    Open Internet Explorer 11.0.9600.17420, running Windows 7 Professional. Very good performance, internet high speed, etc. Downloaded WAP2000 Firmware Release 2.0.8.0 (WAP2000-FW - 2.0.8.0 - K9.img) Access the page to upgrade firmware of the device WAP

  • Restore the default .dll

    How to restore the default icon in the .dll files? I do not want the dll files to open with Notepad. Can someone please help? Thank you.

  • I can't change the desktop background image in my user account.

    ICH versuche, den Desktophintergrund mit Hilfe von "Squad" change. Der PC atmosphere nicht auf die entsprechenden instructions. Für Hilfe ich sehr thankful ware. Original title: partially works nicht