Modified dll function does not not right

Similar Questions

• dll function does not

  Hi all
  I try to use the dll function and one of them always returns 1 (error), and I don't know if I'm doing womething wrong.

  the datasheet of the dll wrote:

  Prototype: int WINAPI rf_M1_authentication2 (unsigned short icdev

  unsigned char model,

  unsigned char block,

  unsigned char * pKey)

  Parameter: icdev: [IN] device ID

  model: [IN] button validate mode

  block: [IN] absolute block address

  pKey: [IN]

  password of 6 bytes

  Return: returns 0 in case of success

  Explanation: model = 0 x 60: via KeyA

  model = 0x61: via KeyB

  The prototype of my function is:

  int32_t rf_M1_authentication2 (uint8_t icdev, uint8_t model, block uint8_t, uint8_t * pKey);

  Any idea?

  Thank you

  Hello

  I finally found the solution using Labview calls to place my table in an area of memory and pass the pointer to my dll. Here is the code:

  

  Thank you all!

• Right-click the folder or any other function does not work, and I don't have a sticky key...

  Right-click the folder or any other function does not work, and I don't have a sticky key...

  While I click right click in windows Explorer has stopped working... Help, please!
  

  A Virus Scan. Your PC can be infected. If you have not installed it, use MS Security Essentials if you have a genuine Version of Windows. It's free.

• The side-by-side function does not work correctly, windows overlap

  original title: sizing windows side-by-side

  The side-by-side function does not work correctly, windows overlap.  How do fix you this feature?

  Hello

  It is Aero Snap.  When you select a window how you "cutting" it in position?  You do not use the window key and the arrow left/right or are you drag / drop window?  If you drag / drop, using the keyboard shortcuts help to solve the problem?

  Kind regards
  Alex T.
  ~ 2007-2011 MVP Windows desktop experience ~

• pcap_loop() to winpcap function does not work in windows8 pro

  Hi all

  I have two windows machines 8, both are 32-bit computers. One is windows 8 and the other is windows 8 pro (version 6.2 Build: 9200).
  I run an application to capture the packets of winpcap. To do this I use dll like 'wpcap.dll, Packet.dll, pthreadVC.dll' and also 'npf.sys"pilot.
  Version of wpcap is "4.1.0.2980", I downloaded this dll from ' http://www.winpcap.org/ '.
  In windows 8 "pcap_loop()" pro machine function does not work, but in windows 8 OS base it works fine and I can able to capture the packets of winpcap.
  Everyone please help me solve this problem.
  I have already installed the update compatibility for windows 8 from 'http://support.microsoft.com/kb/2764462' in windows 8 pro machine, but it does not solve the issue.
  Thanks in advance.
  R VR

  Hello

  I would have you post your query in the MSDN Community because it caters to an audience of it professionals. Your question would be more out there

  http://social.msdn.Microsoft.com/forums/vstudio/en-us/home?Forum=vbgeneral

  You can also contact WinPcap for assistance in resolving this issue.

  If you have questions about Windows operating systems, help us on this forum.

• Basic commands and functions does not

  Hello

  MAIN PROBLEMS:

  1. Chronology of basic functions does not work. My tool icons do not change (for example I click on C for the Cup and the cursor remains a mistake), they still work.
  2. I can no longer drag my clips in and around the timeline, they are "stuck" in place.
  3. A clip with the audio and video are not bound when placed in the sequence. In the video drop-down, it is said that they are linked, but clips act otherwise.
  4. I can't right click on anything in my calendar.

  So here's the big problems I've met only a tooling around. I tried uninstalling and reinstalling several times, with 2015.4 and 2015.3. I'm puzzled.

  The film plays very well and is able to export, problems seem to focus on the timeline navigation and use.

  TECHNICAL DATA:

  • 2013 mac Pro
  • OS X El Captian
  • Version 10.11.1
  • 3.7 GHz Quad-Core Intel Xeon E5

  Any help would be greatly appreciated!

  Hi PatrickShelton,

  Sorry about your problem, try the following steps.

  Go to the following locations:

  1 location: In the Finder, click go > go to folder > ~/Library/Application Support/Adobe

  Situation 2: Go > go to folder > ~/Library/Preferences/Adobe

  Location 3: Documents > Adobe

  Everywhere, rename the folders 'Adobe' to 'OldAdobe '.

  Launch the first, accept the license agreement and see if it works.

  Note: You will lose your customized workspaces and keyboard shortcuts.

  Thank you

  Ilyes Singh

• I want to record with < alt > < s > in the Exact program online. This function does not work. This is the first time I use this program with firefox.

  Question
  I want to record with < alt > < s > in the Exact program online. This function does not work. This is the first time I use this program with firefox.

  edit, escaped mod < s > in order to avoid the line through question

  A web page can be defined a "accesskey" for an item. Unlike IE/Chrome/Safari, who use the Alt key only, Firefox requires pressing Alt and Shift to activate the element. In other words, try

  ALT + SHIFT + S

  and see if it works.

  I don't know of any way to change this so that the change is not necessary. There may be an add-on?

• Satellite Pro 6000; sleep function does not work after upgrade W98 SE to XP

  I bought a windows XP cd and installed on W98 on my Satellite Pro 6000. The sleep function does not work now. I probably need a software of Toshiba. What do I need? Where can I find? What is the order of installation?

  Hello

  All drivers Windows XP Home edition, tools and utilities you can find on Toshiba support page under http://eu.computers.toshiba-europe.com > support & downloads. You have old laptop model and because of this type of product, you choose option ARCHIVE.

  Order of the facilities is as follows:
  -Windows XP
  -Display driver
  -Audio driver
  Toshiba - common modules
  -SD Card host driver
  -SD Card Driver
  -BlueTooth Stack
  BlueTooth - Easy Connect
  -Mouse driver
  -Modem driver
  -LAN driver included with Windows XP
  -Infrared driver
  -Toshiba Power Saver
  Utilities - Toshiba
  Toshiba - post Mobile
  -Toshiba Console worm.
  -Toshiba Hotkey for display devices

  I hope that you will be able to install Windows XP Home edition successfully.

  Good luck!

• curve adjustment function does not work

  Hi all

  I am trying to bend fitting, a graphic. but the curve adjustment function does not work. I get no output curve.

  which suggests to me u.

  Thank you

  You have been asked to view the code. We cannot solve the photos.

  Matrices X and Y are same length? Is a NaN value? What the output error say you?

  (Also note that in this case, it would be convenient if we don't need to wire x take a look at this idea!)

  This discussion is useless until you attach a real VI and data, so please.

• My gesture control function does not work correctly there on and off automatically

  My gesture control function does not work correctly there on and off automatically

  which application you are using? try reinstalling the media gallery.

• ConnAPI.DLL in does not work - how can I reinstall it?

  Frequently, I get a message that ConnAPI.DLL in does not not and I should reinstall I don't know how I lost him and certainly do not know how to install it.   Help!

  ConnAPI.dll error message when you start your computer:
  http://KB.Adobe.com/selfservice/viewContent.do?externalId=kb403011 Carey Frisch

• Backup function does not?

  Backup function does not. The program runs and ends with an error message, access is denied. (0x80070005). Looks like a backup has been completed. I tried another external hard drive as a destination and got the same result. Help!

  Hello

  · You are the administrator of the computer?

  Step 1: Make sure that you are connected to the computer as an administrator. If you are not then you will need administrator to help you in the backup.

  Step 2: Temporarily disable the antivirus and check if the problem persists. If no problem occurs, then you need to firewall settings in the security software.

  Note: Check that you activate your anti-virus protection on the computer back after you complete these steps. It is not recommended to disable these settings on the computer. It's just to solve the problem.

• AUTO PLAYBACK FUNCTION DOES NOT WORK

  AUTO PLAYBACK FUNCTION DOES NOT WORK WITH MY ADOBE PHOTOSHOP 7

  Try to uninstall and reinstall the program.  If this does not work, then I suggest that you contact adobe at http://www.adobe.com/support/photoshop/support.  This doesn't seem to be a Vista problem - it sounds like a problem with Adobe Photoshop. Lorien - a - MCSE/MCSA/network + / A +.

• Sleep function does not

  Sleep function does not

  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.HTML?filter [11] = power % 20Management

  Read the info on sleep disorders in the tutorial above.

  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  Also read this tutorial; as well as the 'related links' at the bottom of the links above.

  See you soon.

  Mick Murphy - Microsoft partner

• Z30 blackBerry not able to sign in Blackberry Protect. Backup and restoration of function does not. "Your device is not associated with a Blackberry ID."

  Unable to sign in Blackberry Protect.  Backup and restoration of function does not. Message is: "your device is not associated a Blackberry ID."  My Blackberry Messenger and Blackberry World works well so I'm sure this isn't a problem of ID on the phone.  I can sign in link, Blackberry.com and Protect.  I see my device to protect, but can't send messages, or view it on a map.  Times out with cannot reach peripheral message.  BB Protect on device has a circle whirling next to the on/off switch.  Cannot turn off.

  I deleted the link and re-installed.

  I reset the phone to the default (factory) and signed in.

  OS level is 10.2.1.3062

  BB link is 1.2.3.56

  I managed to understand this. I had to remove the device from the Blackberry Protect site.  Protect.BlackBerry.com. I deleted my new and connected device with my Blackberry ID.  I don't know if the step of wiping was necessary because I have not tried my backup with the current configuration of the device after the deletion.  The restoration is underway for me!