Module Performance System

Similar Questions

• Performance system for W530 scores?

  I would like to know what other system performance scores are (performance/system/control panel) on their W530s... specifically configured with

  : Intel Core i7-3720QM processor (6 MB Cache)

  NVIDIA Quadro K1000M graphics with 2 GB of DDR memory

  8 GB DDR - 1600 MHZ (2 DIMM)

  500 GB hard drive, 7200 h

  Windows 8 Pro 64 (if this is important)

  I'm confused about my results, they are not what I expected them to be.

  Thanks, I appreciate your comments.

  PCMark Score 7 4940

  http://www.3DMark.com/pcm7/375661

• My computer shows several instances of xpsp2res.dll module in System 32.

  My computer shows several instances of xpsp2res.dll module in System 32.  I found them using Norton Systemworks process Viewer.  They look identical.  Is it a kind of duplication should I eliminate?

  I think that the Microsoft Support Engineer gives you just a bunch of things to try that neither explain the 'problem' or won't help you at all.

  Depending on your installation, you can have several copies of xpsp2res.dll on your system and you should have one in your system32 folder, in the dllcache folder and perhaps many others (I'm 27) in the folder system32 on various issues under the MUI folder and different down there.  You can't have two files with the same name in the system32 folder.

  The MUI folder means "MUI" and the file contains messages XP and icons and files contain specific language XP messages.

  If you use the built in Windows search, you'll probably find a lot.  Each of them a click right, choose Properties and look at the Version and then the language.  If you are configured for English, the one in system32 should say English and others in the various MUI files will show another language in the properties/language (German, Russian, etc.).

  You will also find that you can have dozens of file xpsp1res.dll (for Service Pack 1) and dozens of files for the Service Pack 3 xpsp3res.dll, you can even have a xpsp4res.dll file in your system32 folder (even if there is no SP4 yet).

  Depends on your installation, which we know nothing since MS Answers is no problem for any information system when a new question is asked.

  I really don't see how Microsoft Support engineer 'tips' to run Disk Cleanup or the Microsoft Safety Scanner will help you at all.  It isn't even a good guess, but it has links to the KB articles.

  If you think that your system may be compromised by malicious software, I could do this:

  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.

• Question about disk performancy system

  Hello.

  My situation: I have a virtual machine that contains the server to Oracle 10 g. It has an Intel Quad processor, 4 GB of RAM and SERIAL ATA drive. We have problems of serious performance with Oracle. Using statspack I found that the TOP 5 blocks contains sequential read and write parallel events with high expectations. Also, we run some benchmarks of performance, and they prove my suspicion: this disc is less than my home PC. Looks like we need to change our system of virtual disk. Material on which we run Vmware servers have the disk RAID offers great performance with system.

  But! How do I system virtual disk speedup? I can't find anything useful in the preferences of virtual server...

  Sorry for the stupid question if this is...

  Thank you!

  VMware Server was out of use for a long time. He never was not intended as a platform for production software and would not have been supported by VMware or Oracle as a platform for Oracle databases. The reasons for my being exactly the issues you see.

  Your material seems he could suport ESXi running. http://VMware.com/go/ESXi I would check the HCL to make sure that your hardware is supported, including the network and disk controllers. http://VMware.com/go/HCL

  ESXi is supported by VMware for running Oracle

  http://www.VMware.com/resources/TechResources/10101

• Lenovo X 240 of 1866 Mhz. no luck module, the system is not posting

  I wonder why it does not accept my new memory Hyper X PNP of 1866. This will greatly improove video performance VM is retrieved from RAM. Any expert lenovo can help me here? Do I need a mod of bios or something?

  Hello

  I don't know the cause of the problem is a voltage that this memory needs - 1, 5V, while x 240 supports memory low voltage (1.35v).

• How can I perform system restore in Windows XP? Assistant of nto will work.

  The text is so tiny on web pages.

  None of the suggestions of Support & Help works for me.

  Thank you.

  Elaine

  Which edition of Windows you have (XP Home, XP Pro, Vista, Windows 7) and service pack (none, 1, 2, 3) do you have? Make a right click my computer and select properties for this information.

  Why do you want to do a system restore?

  What happens when you try?  If you get an error message, please provide the full text without paraphrase.

  If you increase the text size in Internet Explorer, select the menu 'View', then 'text size '.

  If you don't see the "menu bar" (file edit view favorites tools help), press the ALT key.

• Cannot connect to the network or perform system restore after installing updates have been

  WIN 7 Home Premium running on a gateway PC connected to the internet via an ethernet connection using a RealTek network adapter for the past 5 years with no problems. Running Avast Pro antivirus / internet security.  09/02/2016, Microsoft and Avast downloaded and installed updates on the PC.  After the PC auto-redémarré as part of the Microsoft updates, I couldn't connect to the internet.  Connect to the network now says unidentified network - no network connection.  The adapter looks like to she always sees the (watch 100 Mbps) connection, but no data packet move.  Device Manager indicates that the unit is working normally.

  I ran through the resolution of the problems of Windows network. I checked the cable was attached, reset the home modem, reset the adapter (toggle), uninstalled/reinstalled using the latest adapter driver available.  I have disabled the Windows Firewall because Firewall Avast wouldn't start.  I disabled all the Avast settings to see if it eliminated the problem.  I tried to run the system restore before the updates but continue to spread the message that there was an unexplained error and restore failed.  All this was done in Normal mode. I restarted mode safe and had the same problems without success.

  I was able to clear the problem by manually uninstalling updates of security Windows which were loaded on 09/02/2016 through the programs and features Control Panel. Then I did the repair of Avast program operation.  I rebooted the computer and the internet connection worked. Then I reinstalled manually updates Windows security on the Windows Update program.

• After a black screen with a cursor, the performed system restore, now cannot open programs, USB drive

  Original title: Windows 7 Home Edition

  Yesterday, my pc only has a black screen with a cursor. I tried to restore on another point but then after starting upwards and put my password, I get the home screen but cannot open any programs. I can't use the USB stick or cd / dvd drive so how should proceed to solve this? I can't put my external modem to make a back up and I really want to fix this without losing all the data on my pc. I can run programs in safe mode and windows installation disc opens in SafeMode as well, however I can't set safe mode.

  Boot from the Windows 7 DVD
  Click Install now
  Accept the license agreement
  When the option is displayed to select a type of installation, click (Custom advanced)

  Select the disk partition where you want to install Windows 7 click Next.

  You will receive the following warning:

  The partition you have selected may contain files from a previous Installation of Windows. If so, these files and folders will be moved to a folder named Windows.old. You will be able to access the information in Windows.old, but you will be able to use your previous version of Windows.

  (At all costs, do NOT click on anything in Format, deletion or Partition name.) So even do a custom installation, your personal files are still kept. Click OK

  The installation program will now begin installation. During installation, your computer will be restarted several times.

  Once the installation is complete, you can complete the Out of Box experience as the choice of your laptop, create a username, password, your time zone. You can then proceed to download the latest updates for Windows and reinstall your applications and drivers.

  You can then retrieve your personal files from the Windows.old folder and reinstall all of your applications and drivers.

  http://notebooks.com/2010/11/09/how-to-recover-documents-music-and-email-after-upgrading-with-the-Windows-old-folder/

• Error: the "bb.system.phone" module is not installed

  I am new to blackberry stunts and tried on the call feature. However, after the execution of my sampling program, the following error occurs:

  import bb.cascades 1.4
  import bb.system.phone 1.0
  
  Page {
  Container {
      layout: StackLayout {
      }
  
      Button {
          id: callButton
          text: "Call me"
          verticalAlignment: VerticalAlignment.Center
          horizontalAlignment: HorizontalAlignment.Center
  
          onClicked: {
              phone.requestDialpad("(519) 555-0100")
  
          }
      }
  }
  attachedObjects: [
      Phone {
          id: phone
      }
    ]
  }
  

  and in my .pro file

  LIBS += -lbbsystem
  

  the error is ' am facing:

  module "bb.system.phone" is not installed
  

  My program will load, but a black screen. Any help will be appreciated. Thanks in advance.

  looking for the question? I find several threads about it.
  They say to use
  qmlRegisterType<>hone; ("bb.system.phone", 1, 0, 'telephone');

  the article on this topic mentions too, so maybe what's missing?
  http://supportforums.BlackBerry.com/T5/native-development-knowledge/BlackBerry-10-Developer-s-guide-...

• HP ZBook 15 G2: No wireless Module in charge (703)

  Dear HP support,

  I reacently bought a WWAN Module and installed in my laptop, but I always get this message when I do a hard reset or turn on my laptop:

  "Not supported Wireles module". "System a dected a wireless Module installed in the system is not taken in charge and disabled." "WWAN Module ID (703). "Enter - boot to continue. "For more information, please visit: www.hp.com/go/techcenter/startup '.

  

  But I don't understand why the Wireless Module is not supported for the WWAN Module that I bought is the: HAWEI MU736 HSPA +. Which is simillar HP hs3110 HSPA + w/GPS WWAN Module, which is also a MU736 HSPA + w/GPS Module WWAN.

  

  Note: Given the WWAN Module installed prevents me not to boot into WIndows.

  Same compactable modue:

  https://www.Swisscom.ch/en/residential/help/Loesung/UDM-compatible-WWAN-modules.html

  It is also compactable with my laptop:

  http://WWW8.HP.com/h20195/v2/GetPDF.aspx/c04128290.PDF

  

  I thought it might be a Bios problem and thus updated my buios to the latest version and also installed the drivers nessary for the WWAN Module.

  BIOS link: http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=6978815 & swItemId = ob_159508_1 & swEnvOid = 419...

  Link drivers: http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=6978815 & swItemId = ob_157737_1 & swEnvOid = 419...

  I then thought that mabey this is not included in the white list of the HP Bios, but I don't see a reason why it is not included because it is compactable, come with an ID of the FCC and the FCC do not apply to me since im in the Netherlands.

  So I'm stuck little because it does not detect windows Device Manager, but he knows that it is installed.

  My laptop specs are as follows:

  https://www.dropbox.com/s/xvk291mtz2te42o/Dxdiag.txt?DL=0

  So HP support and developers team can give me a sollution to this problem?

  Can I get a new update of the BIOS, so that the WWAN Module is accapted?

  Thanks and regards,

  Paul

  Hay Bagusak and someone another faceing the same problem,

  I was able to sove the problem of the "Wireless module not supported (703). The way I solved it was to:

  Updated my BIOS and talking with a professional of the HP for their support to the company, who gave me a replacement for my WWAN card.

  In your case:

  The card WWAN (1000) Qualcomm Gobi you probably bought probably isn't that contains a series of HP, and so it is then listed by the BIOS of HP as a WWAN card that can not be used. Even if your WWAN card is listed as a support for your device if it doesnot have the connect HP series and firmware contained in this topic. The BIOS of HP laptop computer will be automatically 'white list' it. This inturn prevents even appear on my laptop "Device Manager" and making it unusable.

  So, you have the following options:

  1. try to return the product and get your money back. After doing so you can go to ebay and buy one of the cards that are supported by BIOS HP laptops (you can align if they work with your laptop by contacting the seller).

  EBay page for purchasing HP Qualcomm Gobi WWAN cards (1000)

  2 you can set up a deal with HP (if your laptop is still valid) and state the problem you are faceing card top debit MOBILE. After doing if you need to convince them to give you a different card WWAN (need normally 1/2 days so that it reaches your home, depending on how their wherehouses are far from you).

  Support HP case manager

  (NOTE: you will need your ID of warranty, this can be seen by installing HP Support Framework on your pc/laptop HP.)

  3 you can go to the following website and check if your laptop has a 'white list of the BIOS", if yes, then download and istall the BIOS. This tour will allow you to use any WWAN card that can fit in your WWAN Module.

  White list your BIOS

  Alos if your BIOS doesn't is not yet whitelist would change tutorials to unlock your BIOS, but please don't you can BRICK your laptop / PC when you do this so DO this at YOUR OWN RISK.  or you can also ask one of their modulators to unlock your BIOS for you, although they may ask for a small donation in the process of.

  4 perform a hard reset of your laptop by: blocking you laptop / PC, remove the battery and disconnect the battery of your BIOS after doing so, press the power button for 5 seconds (drain all remaining electricity). Then install all the material to him, State of origin and turn on your laptop / pc. It is a very simple step and can run.

  In the case, I hope this helps.

  Paul

• Performance of Bluetooth problem

  I, two headphones listening separate bluetooth (Jaybird X2s and Airfix Matrix 2) this pair perfectly and work fine with my iPhone 6.

  The problem is that when I connect it to my Mac, performance system - audio and video, jump tanks lag mouse, slow individual tasks, etc.

  However, I see no increase in the pressure load of the CPU or memory in the activity monitor.

  I see no unusual chatter in the Console, only messages I expect:

  06/04/16 7:27:50.077 PM blued [26990]: device connected with the address: 44-5e-xx-xx-xx-xx and classOfDevice 0 x 240404 and handle connection 0x000b

  06/04/16 7:27:50.405 PM blued [26990]: CoreAudio trigger for you to connect to bluetoothaudiod

  06/04/16 7:27:52.000 PM kernel [0]: BTCoex Config setting: enable_2G:1, profile_2g:0, enable_5G:1, profile_5G:0

  That said, there are messages that are apparently independent which occur when a Bluetooth audio device is connected and I'm experiencing performance degradation:

  06/04/16 7:30:44.809 PM AddressBookSourceSync [27024]:-[ABPerson valueForProperty:com.apple.Messages.FontSize] - unknown property. This warning will be displayed only once by unknown property, by session.

  06/04/16 7:30:44.811 PM AddressBookSourceSync [27024]:-[ABPerson valueForProperty:com.apple.Messages.FontColor] - unknown property. This warning will be displayed only once by unknown property, by session.

  06/04/16 7:30:44.812 PM AddressBookSourceSync [27024]:-[ABPerson valueForProperty:com.apple.Messages.BalloonColor] - unknown property. This warning will be displayed only once by unknown property, by session.

  06/04/16 7:30:44.813 PM AddressBookSourceSync [27024]:-[ABPerson valueForProperty:com.apple.Messages.FontFamily] - unknown property. This warning will be displayed only once by unknown property, by session.

  06/04/16 7:30:44.813 PM AddressBookSourceSync [27024]:-[ABPerson valueForProperty:com.apple.Messages.RandomBalloonColor] - unknown property. This warning will be displayed only once by unknown property, by session.

  06/04/16 7:30:44.000 PM kernel [0]: sandbox: com.apple.Addres (27025) deny (1) / private/var/run/mDNSResponder network-outgoing

  06/04/16 com.apple.AddressBook.InternetAccountsBridge [27025 7:30:44.817 PM]: dnssd_clientstub ConnectToServer: connect()-> no of tests: 1

  I contacted the support from Apple via Twitter and they recommended the usual Voodoo PRAM reset, but it was not effective.

  Any ideas?

  Now, I'm sure that this is caused by low battery on bluetooth devices to 99%.

  This is a problem that does not occur on my iPhone (even with a low battery), but the loading devices seems entirely solve the problem. Audio begins to jump and performance degrades again once the battery is less than 40% on the headphones.

  Well well... :-/

• Variation of thermal EMF of the PXI-2530 modules

  This message/question is a companion of my the most recent message in another thread.

  In addition to watching some resistance higher than expected that affected current measurements using modules PXI-2530 multiplexer 4W topology, I saw systematic variation in track-to-track blood pressure measurements. Tensions would increase gradually through the 16 channels in a configuration by measuring the voltage at the terminals a resistor 1.5 kOhm with 0.5 au crossing (75 uV). I've identified that the thermal EMF of the reed in the PXI2530 module switches is on the same order of magnitude of these measures and set out to quantify the differences EMF thermal track-to-track between my three modules.

  Test method: I have a TB-50 which is configured to mux the signals of tension for a DMM. I connected each of the four DB-50 one cable of 176 pins to this block and collected with a PXI-4071 pressure readings set to 7.5 digits precision in the range of 100 mV and > 10 GOhm impedance. For most channels, it took several minutes for the voltage stabilize - or at least appear that it was to stabilize.

  I enclose three graphs. Note that the vertical scale is the same on each.

  Data that triggered this survey was collected with MUX1, via connector P2 to voltage. The magnitude was not quite the same-probably related to the phenomenon of stabilization time, but obviously the worst group of channels three multiplexer modules.

  The three modules were all bought at the same time (about 2 years ago), but had only limited its use in the first year or more. The three now have various 'mileage' based on my use. But MUX1 clearly behaves differently two other modules. The

  I changed my test conditions to spend 0.5 au via a higher resistance to thermal EMF less important. The PXI-2530 sheets indicate that thermal EMF must be less than 50 uV. In most of my measurements, it is. But not for MUX1!

  Any thoughts?

  Thank you

  Jeff

  Hi Jeff,

  You can check that all the three modules are PXI-2530, not PXI-2530 b (while, as the PXI-2530 b parts slightly higher thermal emf)?

  Specification of emf thermal 50uV of the PXI-2530 is a typical value, is not a guarantee of spec.  See a few channels higher than the spec is not a cause for alarm, but it shows that we must take account of this in our measurement error.  Note that the industry standard for the technical measure thermal emf is to close the relay, wait a few minutes and then take a measure of tension.  For example, if you scan through a switch faster than a relay per minute or so, the thermal emf will be less predictable and stable.  A single module performs worse at these low voltages is not indicative that this module is a failure, etc. the module is fine.  Unfortunately, the reed relays have more emf thermal relay of the armature, mainly because of the many layers of metal in a Reed compared to a frame (each metal junction is a source of emf if these metals are not the same).

  Thermal EMF is proportional to the temperature, it may be interesting to note the position of the chassis of the less powerful module.  Placing hottest modules (scanners, Ara, RF, etc.) will reduce the thermal emf.

• Location System Board FRU T400

  Hello

  I SIP kind coffee a bit on my laptop and now it beeps: 1-3-3-1, which means: the DIMM module or system board is complete.

  I doubt it's the DIMM, so it must be the system board. I began to undo the basket, but it seems a difficult task to find the FRU on the system board.

  It is NOT under the main battery and NOT under the DIMM, then, where is it?

  Lenovo parts search does not help my S/N + REF.

  Any help will be appreciateted.

  PS I disassembled just before the Assembly of the fan...

  Try looking under the RAM slots

• Can I detect if a module is present in CRIO FPGA?

  I have a chassis cRIO-9073 controller with 8 NI 9237 modules. I intend to use FPGA readings - not the analytical engine. Can I detect if a module is present or not in my FPGA VI? If not, is there a way to do within the VI to host RT? (This is my first project cRIO so I'm still a little green). I can foresee my client who needs to replace a module in the future and having to always operate the system with the remaining modules - the system should be robust and adaptible to default conditions.

  -Thanks in advance

  -Torus

  Hi TJohnsen,

  Yes, you can use this set of screws: http://zone.ni.com/devzone/cda/epd/p/id/1717

  I hope this helps.

  Kurt

• Non system disk or disk error, replace and strike any key when ready

  I bought a new laptop yesterday. I tried to install Windows XP Professional. When I put CD performance system, the error message "not-system disk or disk or error, replace and strike any key when ready."

  Please solve the problem.

  Kind regards
  Bilal T

  Hello

  If this is a new laptop, chances are that there is no available for this purpose XP driver to make it work correctly with XP.

  Web site of the manufacturer of the laptop computer to check for the XP drivers for your laptop model.

  If no driver is available, you're wasting your time trying to install XP.

  If the XP drivers are available, here's how to install XP Professional;

  http://pcsupport.about.com/od/OperatingSystems/SS/instxpclean1.htm

  See you soon.