Module wsp2ro60.dll

Whenever I turn on my computer, I get a message that says: "Error loading C:\WINDOWS\wsP2ro60.dll" the specified module could not be found.

What can I do to fix this?

System: Windows XP

Version 2002

Service Pack 3

Thank you...

René

It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.

I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit. If you make a mistake, that's all.

These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem. Also, I'd be suspicious of ideas that begin with the words "try." You don't need to try things, you need to fix things. You don't need to try ideas that might work, you must do something that will always work all the time.

Here are the detailed instructions that protect you and solve your problem in the 'right' way.

There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them. If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.

A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.

It might be a removal of malicious software or an application not installed. The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.

Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.

So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it. Autoruns (see below) you get the elements no matter where it is.

You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer. The msconfig program is not a Startup Manager, that's a troubleshooting tool. Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration. Just disable the display of a start-up error message should not count as a 'solution' to the problem.

If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns. The problem can always be found in the registry well.

Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry

. There is no cancellation or exit without saving the option in regedit.

Here is a link to a popular registry backup tool:

http://www.SnapFiles.com/get/ERUNT.html

You can also use the Autoruns to find the element of start remains little matter where he's hiding. Autoruns does not install anything on your computer. It will display all startup locations where the reference may be then you can turn it off or remove it completely. Here is the download link for Autoruns:

http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

Run Autoruns.exe and wait that he at the end of the filling of the list of entries.

When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner. Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information. You are really interested only a few sections.

The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.

Scroll through the list and look for a boot entry associated files in the error message.

If you can't find on the connection tab, look in any tab.

You can also click file, search to search for logon, or any tab for all or part of the name of the element.

Right-click on the offending entry and choose Remove. If you are not sure what it is, you can simply turn off (uncheck the entry), reboot, and if the problem is resolved and things work normally and everything works fine, then delete the offending entry. If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it. Autoruns shall display the same information however.

Given that your system has or has had an infection, follow up with this:

Perform scans for malware, and then fix any problems:

No matter what you use for malware protection, follow these steps:

Download, install, update, and make at least an analysis full (not at the same time) with these free malware detection programs:

Malwarebytes (MMFA): http://www.malwarebytes.org/products/malwarebytes_free

SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

These comprehensive analyses can take some time, but you really need to run. SAS will probably be just a bunch of Internet tracking cookies, but you can remove them. Once you have done at least a full analysis, you can do quick scans in the future to save time and save the analyses complete for when you have more time or are really suspicious of an infection of the system.

They can be uninstalled later if you wish.

In 1985, there were 11 known computer viruses. Today, there is more to 1, 122, 311 and the new threats are detected every day. Always update your virus definitions before running a scan.

Restart your computer and solve the outstanding issues.

Tags: Windows

Similar Questions

When closing Firefox 13.01 I always get this pop-up: Exception EAccessViolation in module ntdll.dll to 000222 B 2. Access violation at address 77BF22B2 in module

When closing Firefox 13.01 I always get this popup:
Exception EAccessViolation in module ntdll.dll to 000222B 2. Access violation at address 77BF22B2 in module 'ntdll.dll '. Writing of
address 00000008.
With previous versions of FF it never happened.
Any solution?

Hello

Please check if this happens in a new profile. If the new profile is correct, you can then reset Firefox on the old (previous) profile via the help (Alt + H) > troubleshooting information.

Event 1000, Application error (the default application name: w3wp.exe - name of the failed module: KERNELBASE.dll)

Hello guys,.

During the execution of a web app to make me as a mistake: remote server does not. Here are the details of the spectators of the event who were captured at the same time where this error occurred:

Event 1000, Application error

The failing application name: w3wp.exe, version: 7.5.7600.16385, time stamp: 0x4a5bd0eb

Name of the failed module: KERNELBASE.dll, version: 6.1.7600.16850, time stamp: 0x4e211da1

Exception code: 0xe053534f

Offset: 0x000000000000a88d

ID of the process failed: 0 x %9

Start time of application vulnerabilities: 0 x % 10

The failing application path: %11

Path of the failing module: 12%

Report ID: 13%

Event 1001, Windows Error Reporting

Bucket of error, type 0

Event name: APPCRASH

Answer: No available

Cabin ID: 0

Signature of the problem:

P1: w3wp.exe

P2: 7.5.7600.16385

P3: 4a5bd0eb

P4: KERNELBASE.dll

P5: 6.1.7600.16850

P6: 4e211da1

P7: e053534f

P8: 000000000000a88d

P9:

P10:

Attached files:

C:\Windows\Temp\WERC9CD.tmp.WERInternalMetadata.XML

C:\Windows\Temp\WERC9CE.tmp.HDMP

C:\Windows\Temp\WEREE30.tmp.mdmp

These files are available here:

C:\ProgramData\Microsoft\Windows\WER\ReportQueue\AppCrash_w3wp.exe_30877924d6b2c607fe88a8718915f25fb79093_cab_e905f2b0

Symbol of the analysis:

Recheck for solution: 0

Report ID: d46a6849-8f6a-11e1-98af-00215e6e4855

Display state: 4

It is a priority issue we are facing in IIS. IIS is configured for the 2.0 Framework and underlying operating system is Windows Server 2008 R2 Standard. Please suggest how to solve. Any input related question above is significant.

Hello

In dealing with the problem with Windows Server 2008, it would be preferable to send the same in the Technet community for more help.

http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

application svchost.exe, module ntdll.dll, version 5.2.3790.4789, address 0x0006beb8 failure.

One has the solution for this error

Failing application svchost.exe, version 5.2.3790.3959, failed module ntdll.dll, version 5.2.3790.4789, address 0x0006beb8 failure.
I get an error at startup

This from Event Viewer:

Event type: error
Event source: app error
Event category: (100)
Event ID: 1000
Date: 22/11/2011
Time: 08:06
User: n/a
Computer: SRV03

Hello

·         What operating system do you use?

·         What program are you using when this event occurs?

·         Are you facing any specific issue on the computer?

Please provide us with more information about the issue, so that we can help you further.

You can check this link that looks like the same question.

http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-performance/faulting-application-svchostexe/1f90d246-b834-4E51-bd8a-89333edef0cf

ESynapseError of exception in the module ezGameXN.dll to 000CDF57

Whenever I turn on my laptop I get this error message: Exception ESynapseError in module ezGameXN.dll at 000CDF57. In addition, every time I try to watch a movie its good for about half an hour and then everything just slows down and the only thing I can do is to shut down my computer.

Two things are likely to be associated, and what I can do to solve the problem?

You can perform a clean boot in order to identify which program is causing this problem. After login, you can try either reinstall or uninstall the software.
http://support.Microsoft.com/kb/331796

module ivuxoqoya.dll is not found

On startup, I get this error message with a "appdata". I cleaned my disk and it still appears and a drive next to my pointer just keeps turning. The full message is the module ivuxoqoya.dll is not found

This forum is for posting comments on the web site of Microsoft Answers, is not for technical questions. Post your question in the forum Windows here: http://answers.microsoft.com/en-us/windows/forum

It sounds like malware to me. This module is not part of what Google can locate.

update failed error 80070643 and Setup stops working failed failing msiexec.exe application module msi.dll

I am running windows 7 Home premium. The first error was a failure to update office 2007. several attempts to solve the problem highlighted windows install stopped working. I was in the service and verified that it was automatic and started, but nothing will be installed using msi. Here is the log of one of the failures.

Log name: Application
Source: Application error
Date: 2010-10-05 19:14:09
Event ID: 1000
Task category: (100)
Level: error
Keywords: Classic
User: n/a
Computer:
Description:
The failing application name: msiexec.exe, version: 5.0.7600.16385, time stamp: 0x4a5bc3e6
Name of the failed module: msi.dll, version: 5.0.7600.16385, time stamp: 0x4a5bda99
Exception code: 0xc0000005
Offset: 0x0009f9ad
ID of the process failing: 0xff0
Start time of application vulnerabilities: 0x01cb64e302b7335a
The failing application path: C:\Windows\System32\msiexec.exe
Path of the failing module: C:\Windows\System32\msi.dll
Report ID: 418c73bb-d0d6-11df-9130-0013a9c04fe6
The event XML:
http://schemas.Microsoft.com/win/2004/08/events/event">


    1000
    2
    100
    0 x 80000000000000

    82378
    Application
    Grace-laptop


    MsiExec.exe
    5.0.7600.16385
    4a5bc3e6
    MSI.dll
    5.0.7600.16385
    4a5bda99
    c0000005
    0009f9ad
    FF0
    01cb64e302b7335a
    C:\Windows\System32\msiexec.exe
    C:\Windows\System32\msi.dll
    418c73bb-D0D6-11df-9130-0013a9c04fe6

I can't find anywhere to get a new version of Installer 5.0 for windows 7

Replace damaged by files in your DVD files:

http://blog.NirSoft.NET/2009/09/17/how-to-extract-missing-system-files-from-the-DVD-of-Windows-7vista/

"A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

Error message when starting my PC: exceptional EFOpenError in the module aviWMP54Gv4.dll to 0000DB5F

Hello world

My WIndows XP home PC has an error - Application error Exception EFOpenError in module aviWMP54Gv4.dll at 0000DB5F. What can I do about it? Any help is greatly appreciated.

Thank you

Gemma.

Re-install the latest driver Linksys

Anyone know what means this error and how to fix it? GIFexception of exception in the module aviwusb54gc.dll to 000252af

I get this error message and you can get up to 200 of them. It is so boring. Any help would be greatly appreciated.

GIFexception of exception in the module aviwusb54gc.dll to 000252af

Hi yioryianna,

Thanks for visiting the site of the community of Microsoft Windows XP. The question you have validated, Exceptional GIFexception in module aviwusb54gc.dll to AI 000252af,related to the Linksys WLAN monitor. Your question will be better answered by contacting Linksys Support.

Please let us know if this helped.

Dena
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.

Event ID: 1000 Faulting application devenv.exe, version 8.0.50727.762, stamp 45716759, failed module gdiplus.dll, version 5.2.6001.22319, time stamp 4a841b37, debug? 0, address of failure 0x0001bf5e

My repeateedly of crash of visual studio 2005 in 10-20 minutes

with the following error

Event ID: 1000

Failing application devenv.exe, version 8.0.50727.762, time stamp 45716759, failed module gdiplus.dll, version 5.2.6001.22319, time stamp 4a841b37, debug? 0, address failure 0x0001bf5e.

Event ID: 1023

.NET runtime version 2.0.50727.3615 - engine error fatal execution (7A2E1122) (0)

Hi ashnov,

1. did you of recent changes on the computer?

2 when was the last time it was working fine?

Method 1

I suggest that you install the updated drivers for the graphics card on the computer by visiting the card manufacturer or the manufacturer of the computer Web site to download and install the drivers, check if it helps.

How to manage devices in Windows XP

http://support.Microsoft.com/kb/283658

Method 2

If the previous step fails, then I suggest that you do the system restore and check if it works.

How to restore Windows XP to a previous state

http://support.Microsoft.com/kb/306084

Method 3

I suggest that scan you SFC on the computer that would be a system file corrupt on the computer search and replace.

The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows XP installation CD.

Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

http://support.Microsoft.com/kb/310747

Method 4

If the steps above fail, then reinstall the program and check if that helps.

7 c 911689 in module 'ntdll.dll '.

I get a message "Access violation at address 7 911689 in module 'ntdll.dll'. Read of address 00000000 ". How can I fix or eliminate popup to constantly come back?

These articles may help you:

http://www.techsupportforum.com/forums/F10/solved-waln_cfg-access-violation-368823.html

http://connect.Microsoft.com/VisualStudio/feedback/details/118061/unhandled-exception-at-0x7c93426d-ntdll-DLL-in-ssexp-exe-0xc0000005-access-violation-reading-location-0x00000000

Event ID: 1000 - Faulting application vstudio.exe, version 13.0.0.0, failed module msvfw32.dll, version 5.1.2600.5512, fault 0x0000a81a address.

Failing application vstudio.exe, version 13.0.0.0, failed module msvfw32.dll, version 5.1.2600.5512, address failure 0x0000a81a. After execution of the application for a day or two, the application closes. The event log has been as above. I ran "sfc/scannow" but he has no apparent effect. Nothing in the log of events to indicate any repaired or replaced file. How do I know if msvfw32.dll is bad, and if it is, how do I replace it. If this is not bad, what else could be the cause?

You run Microsoft® Windows® Update? There are a couple of security updates for Visual Studio, DirectShow and Quartz which involve the msvfw32.dll and vstudio.exe. Try and let the forum know if this helped.

module 'missip32.dll' is not found

I tried to fix problem with turning on Windows Defender... my last attempt to save DLL files came iup with "module missip32.dll failed to load." Make sure the binary is stored at the specified location, or debug it to check for problems with the binary or dependent .dll files. The specified module could not be found. Can someone guide me through this procedure please. I don't know where to start. Thank you and it's really appreciated.

Hello

Were you running "step 2: If the System File Checker tool cannot repair a file" of http://support.microsoft.com/kb/929833?

Access violation at address 74F735D1 in module "OLEACC.dll". Read of address 00000048

Original title messages: error

Can you please help me fix this annoying message. I get several guests for her, and I don't know why.

Access violation at address 74F735D1 in module "OLEACC.dll". Read of address 00000048

Hi Travis815,

(1) when exactly you get this error message?

(2) since when are you facing this problem?

(3) remember you to make changes to the computer?

Please quote the complete error message you receive.

Method 1: Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

http://support.Microsoft.com/kb/929833

Method 2: Put the computer to boot and then check if the problem persists

Follow step 1 in the link below,
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

Continue with the remaining steps to pin-point on the third party service.
After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

Thanks and greetings

Ajay K

Microsoft Answers Support Engineer
***************************************************************************
Visit our Microsoft answers feedback Forum and let us know what you think.

abends IE8 8.0.6001.18702 in module xwr85739.dll worm 1.0.352.7 worm offset: 0001aa68 when doing the web searches__

Help! Only recently (probably after the application of a patch) my IE8 8.0.6001.18702 worm abends in module xwr85739.dll worm 1.0.352.7 offset: 0001aa68 every time I want to search by using the search box in IE (Ctrl-E), the web no matter which search engine, I chose (Google, Yahoo, etc.). Any ideas would be very appreciated!

Ted

[Duplicate of http://social.answers.microsoft.com/Forums/en-US/InternetExplorer/thread/ed3ecb8b-2f31-4fdb-96a4-dffc86edbb72] ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

Module wsp2ro60.dll

Similar Questions

Maybe you are looking for