modurn host

Similar Questions

• How to save my host file?

  I use El Capitan and try to add an entry to my host file.

  I am all good up to the point where I have to enter ^ O.

  At that point, he opens a Finder window to register but I have no idea where to save to. I tried pretty much all the options available, but it cannot save anywhere. Help, please!

  Are you talking about the file/etc/hosts?

  What exactly do you do? Be careful. It's sensible things, and you should do not mess with it unless you know what you're doing. Please serious.

• Anyone who has used a Mac hosting / Mac VM solution?

  Hello

  There are dedicated hosting of Mac and Mac VM services advertised.  Can anyone recommend the experience one of these services that works well, has a high level of security, low cost and suitable for a test environment?

  Cheers, dwbrecovery

  You can try VirtualBox, it is working well. A small relatively new on the block is Veertu, both of which have experienced us with running Linux and Microsoft. Veertu offers you a relatively new approach.

  Paid solutions include VMWare and Parallels, both are excellent.

  HTH

  Leo

• How to change the hosts file

  I want to change a DNS setting. How can I do?

  Hi Stueyn,

  It's the step:

  1. open terminal

  2. Enter the following command:

  sudo vi/etc/hosts

  3. Enter the admin password

  4. change the items you want to

• Emails sent from thunderbird arrive to spam, very well arrive sent e-mail web host.

  I use 1and1 hosting for a provider of e-mail company website and the company. When I send emails to gmail accounts using the 1and1 interface they manage very well, but when I send them using thunderbird they arrive at the level of the junk e-mail folder.

  I've confirmed this by sending to several different gmail addresses and company represents several I use in thunderbird. The same as always the case, emails sent to gmail via thunderbird are sent to spam, but those who are sent directly from 1and1 arrive perfectly.

  Is there a setting in thunderbird that is causing this problem? I have tried Turing on and outside, anti-spam and antivirus put in mail electronic provider 1and1 but to little effect. Thank you in advance.

  When you send via webmail goes directly from 1 & 1 webmail server.
  When you send via thunderbird it goes via the smtp server.

  It is possible that gmail is down your IP address that sends spam.
  Try changing your IP address to test.

  The SMTP server associated with the host of your domain, it is possible that the IP of your host (or range of IP addresses) can be on the black list of one or more of the known spam servers, based on other users of the same service.
  A search on the web for the blacklist of email server will give you several sites that you can use to determine if your server is on ordinary black lists.

  Send via webmail could pass through completely different servers with different IP numbers explaining why these emails are not be marked as spam.

  Select e-mail to have it displayed in the messages pane.
  Click on "More" and select "view source".
  In the headers of messages that have been classified as spam, you can find the header information of spam by the mail scanner which has classified the message as spam, which may help to establish what is mark as spam.

• Suddenly cannot send mail. Message 4.7.1: Recipient address rejected: rejection policy - your host has been blacklisted for e-mail abuse.

  When I try to send a message an error box apperars:

  An error occurred while sending mail. The mail server responded:
  4.7.1 < ***@***.com >: recipient address rejected: rejection policy - your host has been blacklisted for e-mail abuse. Please configure your email client to use authentication SASL - contact support if in doubt how...

  Please check the message recipient "*********@******.com" and try again.
  

  This happened while I was sending about #3 4 or 5 that I must send. Nothing I know has been changed has been changed! I have downloaded the latest version while I was in the program.

  This seems to be a message from a server. The word 'host' is not clear to me. In the language of networking, it can mean your own computer, but more generally, it could mean your ISP provider or by e-mail.

  Anyway, this means that something has decided that you are, or are on a network that has been identified as a source of spam. I suggest that ask you this from your ISP.

• Can I include a signature hosted on a remote server, create the signature in Tunderbird and store the file locally?

  I want to insert a signature that I hosted on a web server without having to create and save the local html file on my computer, is it possible? I know that I can insert a picture from a web server as part of my signature, which is not what I'm asking. Is there an add-on or anything else that can help me to insert my signature from a web server directly, without having to host the file locally?

  You do not have to store the signature on your computer, but Thunderbird will not bind to a text or HTML signature on a remote server file.

  Thunderbird is waiting for you to provide a simple signature to provide the URL to the 'IMAGE' stored on the remote server and this link should be included in Thunderbird, if not how to be referenced in the message?

  You can always include a link to the text that is stored remotely or a HTML signature in your message, but the recipient will activate it? Once again this link would be stored in the message

  TB - 38, 3 Win10-PC

• FireFTP cannot add Yahoo hosting server certificate exception

  Hello

  Can anyone help me, how to get the right setting to access Yahoo hosting server via FireFTP.
  I used to get that way before (starting a forum thread) and worked: http://forums.mozillazine.org/viewtopic.php?f=38 & t = 2514599
  Which is by adding the prefix https:// on ftp. ["Mywebsite"] .com:21

  I use Firefox version 39.0.3 btw.

  Thank you!

  I couldn't access it using FireFTP. Maybe it's because FireFTP does not support the FTPS.
  FireFTP is not part of the FTP client offered by Yahoo: https://help.yahoo.com/kb/yahoo-web-hosting/ftp-client-sln20423.html

  But now, I can access it using FIleZilla, adding ftpes: / / prefix on ftp. [Mywebsite] .com
  This is the link of reference to define: https://forum.filezilla-project.org/viewtopic.php?t=25975

  Nevertheless, thanks jscher2000 for trying to help!

• Impossible to install the modules that are hosted outside of AMO

  I can't install any add-on that is hosted outside of AMO, in Firefox for Android 40.0.3, nor in Firefox Beta for Android 41.

  What I think should happen: I have download the file as signed (it records to SD card), then open it with Firefox and Firefox should ask me if I want to install this module.

  What is really happening: an add-on is downloaded, but when I open it is file as with Firefox - nothing happens. Firefox comes to shows me a blank screen (see the screenshot).

  My friend has this problem too.

  Looks like a regression bug (because I could install add-ons hosted out of AMO without any problems in previous versions), but I'm not entirely sure.

  So my question is: should I file a bug on Bugzilla or is it possible to install the modules hosted outside of AMO to Firefox for Android and it's just me something wrong?

  My phone has Android v2.3.5.

  UPDATE: apparently, I can not install the modules of local files, but can do some some sites. My module (I have problem with) is hosted on Github, and I can't install it for whatever reason.

  Update 2: it seems that modules can be installed from Github if she is not just a file (because Github changed Content-Disposition of at least some types of raw file of 'inline' to 'attachment'), but a binary attachment to a "news release".

  Apparently, I found a work around for this problem, so that this issue does not require a response more.

• On sending a message, the server sent a wrong message: #4.4.5. too many connections to the host

  On sending a message, an error has occurred "the mail server has sent a wrong message: #4.4.5 too many connections to this host..."
  The mail is displayed as sent in envoys, but is not received by the recipient. On sending several messages to test myself this fault seems to be intermittent.

  Hmm did you get mail outbound scanning performed by an anti virus program? Turn the power off.

  Have the e-mail account on your phone? try turning off your phone.

  Is the IMAP or POP account?

• Get the "Failed to connect to server" error after having my hosting of emails expire and reconnected. Using the latest version of Thunderbird.

  Hi, I am probably doing something really basic and easy to fix but facepalmingly pls have patience with this n00b...
  My emails with Crazy Domains Hosting has expired a couple of months, I've just managed to get it reconnected.
  When I open Thunderbird once again, I kept getting the error msg "Failed to connect to server".
  I checked all the settings for the account, they are all fine as far as I KNOW. Updated to the latest version of Thunderbird, tried to restart the program and doesn't have the obligatory IT Crowd "troid torning it and turn it on again", still get the same message.

  Plaaaaiiss... Halllp!

  Regardless of my fault for typing. What is important is that there is nothing in the DNS or whois on the domain.

  Look at their own whois server it shows pending deletion, expired in April. http://www.crazydomains.com.au/WHOIS/littleredfoxdesign.com/#result

  Until these public information are corrected your not likely to be able to connect because Thunderbird can not find the server. There is no DNS records to point to it.

• Thunderbird - fails to connect to a hosted system of Google Mail

  OS: Win 8 / Thunderbird 31.5.0

  A few nights - all on the Thunderbird IMAP connections failed with the error: "connection to server < email name > failed.

  Since then, I have:

  • tried to remove the account and add it again
  • tried to reinstall Thunderbird
  • Delete the profile and the profile manager used to create a new.

  Nothing did.

  I've pasted below the imap log output:

  4148 [ea26e60]: ImapThreadMainLoop enter [this ed7b800 =]
  0 [250f140]: ed7b800:imap.googlemail.com: NA: SetupWithUrl: IMAP_CONNECTION_IS_OPEN of compensation
  4148 [ea26e60]: ed7b800:imap.googlemail.com: NA: ProcessCurrentURL: enter
  4148 [ea26e60]: ed7b800:imap.googlemail.com: NA: ProcessCurrentURL:imap://user%40google-hosted%[email protected]:993/select%3E%5EINBOX: = currentUrl
  4148 [ea26e60]: ReadNextLine [stream = e6e5428 nb = 0 needmore = 1]
  4148 [ea26e60]: ed7b800:imap.googlemail.com: NA: CreateNewLineFromSocket: compensation IMAP_CONNECTION_IS_OPEN - rv = 804b000e
  4148 [ea26e60]: ed7b800:imap.googlemail.com: NA: TellThreadToDie: close the socket connection
  4148 [ea26e60]: ed7b800:imap.googlemail.com: NA: CreateNewLineFromSocket: (null)
  4148 [ea26e60]: ed7b800:imap.googlemail.com: NA: ProcessCurrentURL: abandoned in queue URL
  4148 [ea26e60]: ImapThreadMainLoop leaving [this = ed7b800]
  3964 [885ec50]: ImapThreadMainLoop enter [this 8ce4800 =]
  0 [250f140]: 8ce4800:imap.googlemail.com: NA: SetupWithUrl: IMAP_CONNECTION_IS_OPEN of compensation
  3964 [885ec50]: 8ce4800:imap.googlemail.com: NA: ProcessCurrentURL: enter
  3964 [885ec50]: 8ce4800:imap.googlemail.com: NA: ProcessCurrentURL:imap://user%40google-hosted%[email protected]:993/select%3E%5EINBOX: = currentUrl
  3964 [885ec50]: ReadNextLine [stream = 8 d 47108 nb = 0 needmore = 1]
  3964 [885ec50]: 8ce4800:imap.googlemail.com: NA: CreateNewLineFromSocket: compensation IMAP_CONNECTION_IS_OPEN - rv = 804b000e
  3964 [885ec50]: 8ce4800:imap.googlemail.com: NA: TellThreadToDie: close the socket connection
  3964 [885ec50]: 8ce4800:imap.googlemail.com: NA: CreateNewLineFromSocket: (null)
  3964 [885ec50]: 8ce4800:imap.googlemail.com: NA: ProcessCurrentURL: abandoned in queue URL
  3964 [885ec50]: ImapThreadMainLoop leaving [this = 8ce4800]
  3056 [ea26a70]: ImapThreadMainLoop enter [this 7deb000 =]
  0 [250f140]: 7deb000:imap.googlemail.com: NA: SetupWithUrl: IMAP_CONNECTION_IS_OPEN of compensation
  3056 [ea26a70]: 7deb000:imap.googlemail.com: NA: ProcessCurrentURL: enter
  3056 [ea26a70]: 7deb000:imap.googlemail.com: NA: ProcessCurrentURL:imap://user%40google-hosted%[email protected]:993/select%3E%5EINBOX: = currentUrl
  3056 [ea26a70]: ReadNextLine [stream = 8 d 47888 nb = 0 needmore = 1]
  3056 [ea26a70]: 7deb000:imap.googlemail.com: NA: CreateNewLineFromSocket: compensation IMAP_CONNECTION_IS_OPEN - rv = 804b000e
  3056 [ea26a70]: 7deb000:imap.googlemail.com: NA: TellThreadToDie: close the socket connection
  3056 [ea26a70]: 7deb000:imap.googlemail.com: NA: CreateNewLineFromSocket: (null)
  3056 [ea26a70]: 7deb000:imap.googlemail.com: NA: ProcessCurrentURL: abandoned in queue URL
  3056 [ea26a70]: ImapThreadMainLoop leaving [this = 7deb000]

  Any help - greatly appreciated.

  After that - it's so the router!

  It turns out that the router has a 'Firewall' really lame and lazy. In "high security" mode, it allows HTTP/HTTPS.
  When "medium security" mode it allows IMAP, SSH, etc.

• What is the best way to sync contacts with a host of webdav?

  I use Thunderbird and Contacts Android as of client applications with an owncloud 8 hosted remotely. I have activated the application Contacts on Owncloud and now I want to sync the contacts between these systems. What is the best way to do it?

  I try to get sorted first Thunderbird. I tried Addressbooks Synchronizer, but currently, it gives me a message telling me that my credentials are wrong or is sitting silently, do nothing. I am aware that it is a file synchronization, the method of synchronization not saved, so it is not ideal, in any case.

  Is there a better, good timing, method I can use? I refuse to the thing that he is an unreasonable request or that no one asked before me, but I can't seem to find the answer.

  Thanks, Martin

  WebDAV my initial reaction was sogo connector.
  These guys recommend the same http://kb.mozillazine.org/Sharing_address_books

  Here http://www.sogo.nu/english/downloads/frontends.html

• Crush the account for new host settings does not work.

  I would be grateful if someone could help me, my email hosting company a supplier has changed, but my two addresses remain the same. Crushing my two POP3 accounts with the new settings of the server does not work. I checked with the new owner that the settings are correct, but they suggest that this problem is probably down to Thunderbird and profiles in a way works and is outside their mission of support. My provider is puzzled, but to be honest I only have a small amount of ability here. I need to keep all of my old emails and their structure files and to get the connection to the new servers host works. Anyone who wants to help?

  Thank you, Simon

  I had the help of my provider to fix this.

  Basically, you cannot overwrite an existing account with new parameters. The answer is to create a new account and edit the old one so it does not carry the same settings of server and user name. Now, I spend all my archives of old emails to the new account, but which is described elsewhere, I think.

• I'm about to change web hosting service, but not the email addresses - how to back up my archived emails?

  I am changing web hosting services but will keep the areas and associated e-mail addresses. I don't want to lose the mails I saved in folders. They will remain available after I have change the host site or I have to save elsewhere? If I need to save, what will do?

  It is IMAP

  With IMAP, all mail is handled on the server. So, to keep all your mail, you'll need to save all messages in your account "local folders".

  First of all to replicate the folder structure on the server in your 'local folders '. You will need create these folders manually.

  Select all messages in a folder on the server (press Ctrl-a). Right-click the selected messages - copy - choose the corresponding destination folder

  I would like to start with a single message to test the procedure. If you have a big no. messages, in pieces, do not copy thousands of messages at once. After each copy action, verify that messages have in fact been copied on.

  Repeat the procedure for every folder on the server.

  Once your new account (IMAP) works, you can download the messages to the new server.