Monitor blacks out, error message "does not signal.

This problem just started today. My screen keeps blacking out. I checked the cables and they were good. I did a Defrag. I changed my settings to standby power screen forever. When the screen turns off, the error message is "" does not receive do not signal. "" Is this a hardware or driver problem? Thank you.

Hello

 
1. have you made changes on the computer before this problem?
2. What is the brand and model of the computer?
 
I suggest you try these methods and check.
Method 1:
Start your computer in last good known Configuration mode and check.
Advanced startup options.
http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode
 
Method 2:
If you find the same problem using last good known Configuration, start the computer in safe mode and check.
If the computer works fine in safe mode, uninstall the display driver, restart the computer in normal mode and check.
Step 2:
Uninstall the driver from Device Manager graphics card.
1 right click on the computer icon
2. Select manage from the menu.
3. Select Device Manager in system tools that are listed in the resulting display.
4. right click on the device.
5. click on the driver tab.
6. click on uninstall.
7 restart the computer
You can download and install the latest driver for graphics card on the computer manufacturer site.
Graphics driver will reinstall after a reboot in normal mode, if the computer is connected to the Internet

Tags: Windows

Similar Questions

  • Error message does not appear

    A login screen I have a Validation. This Validation checks too many failed connection attempts. It works in part because it prevents the user to login when there has been too many attempts to register. But I clear the error message does not appear.

    Display message error location choices are in line with field and in the Notification, in line with the field, Inline in the Notification and error Page. None makes no difference, the error message that I've specified does not appear.

    What can you tell me? Thank you

    Request Express 4.0.2.00.07

    Is what I saw, people by adding an element of the display on the login page to display these error messages...

    Thank you

    Tony Miller
    Los Alamos, NM

  • The controller throws an OAException, but the error message does not appear

    I made a controller to add validation business customized to a specific region of a page of Iprocurement. The controller throws an exception, but the error message does not appear on the page.

    Why when the exception is thrown, the system do not stop the processing of the page and displays the error message?

    I do not know the controller is reached because the page through JDeveloper debugging.

    -PageLayout

    -stackLayout

    -subTabLayout <-my controller is located in this region

    SerializableAttribute public class AccountsDistsValidationCO extends

    {oracle.apps.fnd.framework.webui.OAControllerImpl}

    ' Public Sub processFormRequest (pageContext OAPageContext, OAWebBean webBean)

    {

    super.processFormRequest (pageContext, webBean);

    throw new OAException ("something just happned");

    }

    }

    I should to use the following to solve my problem

    pageContext.putDialogMessage (message);

    pageContext.forwardImmediatelyToCurrentPage (null, true, null);

    Reference:

    OAException.ERROR is not throwing the error

  • Windows Media Player - error message, does not start

    Whenever I try to use Windows Media Player, I get the following error message:

    "To use Windows Media Player, log out of Windows, log back in and then start Windows Media Player."

    When I followed the instructions, it does the same thing.  He did this for a very long time, and usually I just give up and return to work, but now I need to watch videos of presentations.

    How can I fix it?

    > snip
    (2) reinstall Windows Media Player again.

    a. go to start and in the search type 'Turn Windows has or not'.

    b. click on the "Turn Windows features on or off".

    c. check the "media features.

    d. restart the computer.
    > snip

    =======================================
    In accordance with the following Microsoft... article in turn one
    Windows feature / disable is not uninstall / reinstall.

    Windows 7 - or disable Windows tour features
    http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-features-on-or-off

  • "" DNS server to error message "does not.

    Original title: has no Internet connection

    I had used my nokia phone as a modem with success for a few days. Subsequently, rather than connecting, I started getting a message saying that the DNS server does not. When I put in a different SIM from the same phone company, I am connected. Help, please.

    Hello Stephen,

    We get the DNS server does not no error for the following reasons

    a: The server that hosts the site may be temporarily down for technical reasons

    b: The DNS service in your computer is damaged or does not

    c: Firewall security or security software itself could have inadvertently blocked your PC to communicate with a Web site or some Web sites

    Clearing the cache of DNS (domain name system), forces DNS to query a DNS server rather than using the information stored in the cache. You can clear the DNS cache on changes to the websites that you manage, or if you receive repeated errors when you know that you type an address is correct.

    Empty the DNS and check if it helps to rectify the problem.

    a: Click the Start button

    b: In the search box, type command prompt.

    c: In the list of results, right-click guest, and then click run as administrator.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

    d: At the command prompt, type ipconfig/flushdns hit then enter.

    Answer please if you have any questions.

  • Error message does not

    Good afternoon

    I am currently editing text to match the auido calendar in my 6 Captivate Slides.  I'm running continuously in an error message "not responding".  Please check with sugeestions on how to stop this.

    Already tried:
    -Restart Captivate
    -Restart System
    -Work on the release of Captivate with no other program running

    Not Responding Captivate.JPG

    Thank you!

    Have you tried to empty the cache? If this does not help, update the Preferences folder, but then you will lose any customization.

  • Instaverse gives error message does not open

    When I try to open InstaVerse, I get an error message reading "access violation at address 005BEC46 in module InstaVerse.exe.
    Read of address 00000024 "

    It seems you have a problem with Instaverse, not Firefox. This is one side of Firefox Help. Having a problem with Mozilla Firefox, we can help you?

  • ATI graphic driver says error message does not properly

    I constantly get a message indicating that the ATI graphics driver does not work correctly.  I downloaded an update, but then got another message indicating that the file is not found.  Can you help me please?

    Hello

    You mean you downloaded an updated driver? Download it again and note where you
    put it as indicated in the driver updated of the methods below.

    Download - SAVE - go to where you put them - right click – RUN AS ADMIN - REBOOT
    After each installation.

    Check with ATI (manually), supported drivers and their forums as they could be called
    questions.

    Download the Catalyst Drivers here
    http://game.AMD.com/us-en/drivers_catalyst.aspx

    ATI - Forums
    http://forums.AMD.com/game/categories.cfm?CATID=260&forumid=11

    ATI - Support and drivers
    http://support.AMD.com/us/pages/AMDSupportHub.aspx

    ================================================================

    This utility, it is easy see which versions are loaded:

    -Free - DriverView utility displays the list of all device drivers currently loaded on your system. For
    each driver in the list, additional useful information is displayed: load address of the driver, description,.
    version, product name, company that created the driver and more.
    http://www.NirSoft.NET/utils/DriverView.html

    For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
    Control Panel - Device Manager - graphics card - note the brand and complete model
    your video card - double - tab of the driver - write version information. Now, click on set to update driver
    (this can do nothing as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
    This will refresh the driver stack.

    Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with
    their own software and drivers and all other main drivers that you have.

    Now in system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), then the manufacturer of the device
    site (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and)
    software updates on the site of the manufacturer of the system here.)

    Download - SAVE - go to where you put them - right click - RUN AS ADMIN - reset after each
    installation.

    Always check in the Device Manager - tab drivers version you install actually shows up.
    This is because some restore drivers before the most recent is installed (particularly that audio drivers) so
    install a driver - reboot - check that it is installed and try again if necessary.

    Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check manually
    by model.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
    This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
    questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
    manually if you wish.

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    Hope these helps.

  • Validation error message does not disappear

    I have a search panel which will be fires validation errors while doing a search if the validation fails. When I try to click on the navigation links its not sailing only steps away to other pages because of this error. Anyway to avoid this validation errors?

    Thank you
    Bastien

    Try please keep immediate = true for the interface controls user who needs to skip the validation phase

  • "" File to error message "does not contain a 32-bit software" what xerox workcentre pe220 installation' pilot

    Original title: xerox workcentre pe220'drive does not work

    I need help. I downloaded xerox workcentre pe220' 32-bit disk. When I try to install, it's been declined (Advisor: folder does not contain software for 32-bit)

    I use windows 7 ultimate 32 bit.

    Could you help me?

    Thank you

    Liana Almeida

    my email: * e-mail address is removed from the privacy *.

    or * address email is removed from the privacy *.

    Hello

    Follow the steps below and check.

    a: Right-click the installation file.

    b: then select run as administrator.

    Hope this information helps.

  • constant random error message "does not:

    weather it's IE, MSN browsers or use of files or download programs have run sys file check and results are no problem, how can I solve this problem

    When is - this problem started? A system restore may solve the problem

    Use system restore to restore your system to a previous state when it was working fine

    =================

    1. click 'Start' and type system restore in the search box, and then click "System Restore" in the section programs.

    When you are prompted by the User Account Control feature, click "continue".

    2. do one of the following

    * If there is a recommended restore point, click on choose a different restore point and then click Next.

    * If there no restore points recommended in the list, simply click next to continue.

    3. Select a restore point in which you know that the operating system works and then click on "next".

    5. in confirmation of your restore point page, click on "Finish".

    http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

    In "Safe Mode with networking" virus scan

    ================================

    Note: If you use a modem cable or LAN connection at home, please leave point 1 below. If not, please ignore items 1 ~ 3 and proceed to step 4.

    1. reboot the computer.

    2. after 'POST' (Power On Self Test has usually a screen in text mode at the beginning when a system boots), continue pressing the F8 key until the Windows Startup menu appears.

    3. choose "Safe Mode with networking" and press ENTER.

    When in Mode safe mode with networking, check if the problem persists. If the problem persists, we will take the following steps to make a direct security scan.

    4 Please, open Internet Explorer and visit http://safety.live.com .

    5. Please click the 'Full Service analysis' button and follow the instructions on the screen to search for viruses on the computer.

    After completing the above steps, restart the computer to see if the problem is resolved.

    Also use the below mentioned the software to scan your system if necessary

    http://www.Malwarebytes.org/MBAM.php

    www.Microsoft.com/security_essentials

    http://www.prevx.com/

    Microsoft Malicious - 32-bit removal tool
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

    Microsoft Malicious removal tool - 64 bit
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

    http://www.eset.com/onlinescan/

    http://OneCare.live.com/site/en-us/default.htm

    http://www.Kaspersky.com/virusscanner

    If this post can help solve your problem, please click the 'Mark as answer"If you find it useful, mark it as useful by clicking the 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Windows Vista starts - Windows error message does not close properly

    Whenever I turn on my computer, I get a message that Windows did not close properly, even though I know that I went through the correct procedure when stopping down.  It started only in the last days.  I did not change my machine or installed / uninstalled something.

    Restore point:

    Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

    Try a restore of the system once, to choose a Restore Point prior to your problem...

    Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

     

    If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

    Download the ISO on the link provided and make a record of repair time it starts.

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

    When you have changed that, insert the Bootable disk you did in the drive and reboot.

    http://www.bleepingcomputer.com/tutorials/tutorial148.html

    Link above shows what the process looks like and a manual, it load the repair options.

    NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

    Read all the info on the website on how to create and use it.

    http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

    ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

    It's a very good Vista startup repair disk.

    You can do a system restart tool, system, etc it restore.

    It is NOT a disc of resettlement.

    And the 32-bit is what normally comes on a computer, unless 64-bit.

    See you soon.

    Mick Murphy - Microsoft partner

  • 31, Microsoft ISATAP adapter 3 error code does not work. Help!

    I made a report of diagnosis, and this error came.  Unit does not properly.  Windows cannot load the required device (Code 31) drivers > ROOT\ * ISATAP\0004.  I would appreciate help to correct this problem.

    Thank you very much

    Hello

    ·                         http://support.Microsoft.com/kb/932520

    On a Windows Vista-based computer or on a Windows Server 2008-based computer, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message

    Windows cannot load driver (Code 31)

    You can ignore this error message. This error message does not indicate a problem with the adapter. The adapter will continue to function correctly.

  • validation error message is not displayed for an attribute as a list of value of the entry

    Hello world

    I use jdev 11.1.1.7.0

    In my application, I created an entity Obj and Obj employees base table.

    for the attribute JobId , I took the actions listed below:

    1. in the EO staff, I created a validation for this attribute and in some cases the error message returns (the error message is "the salary is not high"):

        /**
         * Validation method for JobId.
         */
        public boolean validateJobId(String jobid) {
    
    
            if (...) {
                return false;
            }
    
    
            if (...) {
                return false;
            }
    
    
            if (...) {
                return false;
            }
    
    
         
            return true;
        }
    

    2. employees Vo, I created a LOV for this attribute (the view accessor is JobsViewObj) and I display the attribute entry of text with a list of values.

    in the jspx page, I drag / drop this attribute as below:

              <af:inputListOfValues id="jobIdId"
                                    popupTitle="Search and Select: #{bindings.JobId.hints.label}"
                                    value="#{bindings.JobId.inputValue}"
                                    label="#{bindings.JobId.hints.label}"
                                    model="#{bindings.JobId.listOfValuesModel}"
                                    required="#{bindings.JobId.hints.mandatory}"
                                    columns="#{bindings.JobId.hints.displayWidth}"
                                    shortDesc="#{bindings.JobId.hints.tooltip}"
                                    autoSubmit="true">
                <f:validator binding="#{bindings.JobId.validator}"/>
              </af:inputListOfValues>
    

    I opened the popup and I select a line in the list and then I click Ok. After that, if the validation method (validateJobId) returns false, the error message ("the salary is not high") must be show to the user. but the error message does not appear. I don't understand why this is happening.

    Can anyone guide me on this problem?

    Concerning

    Habib

    Hello Dario,

    I just found this post: http://andrejusb.blogspot.nl/2013/12/workaround-for-infamous-bug-13626875.html that apply ExceptionMode = immediate adjustment to control the use of data in DataBindings.cpx, then the error message is displayed as I hope.

    Concerning

    Habib

  • cc of Photoshop does not open JPEG - error message "file not found" just upgraded to the latest version of photohop cc

    cc of Photoshop does not open JPEG - error message "file not found" just upgraded to the latest version of photohop cc

    I just replaced my 9.5 Raw camera with Camera Raw 9.4, from this page:

    Camera Raw installation of Adobe Photoshop CC and CS6 program

    It worked, now I'm back in business!

    PS. along the way, I installed Camera Raw 8.3 (manual drag-and - déposer), in response to advice on a pretty old thread, and that worked as well.

Maybe you are looking for