Similar Questions

• I have an old Mac Mini with a DVI Port that came with a VGA DVI-adapter.  Tonight, my monitor went down.  Brand new monitor works with that?  Can I use an adapter?  If yes should which adapter I?

  I have an old Mac Mini with a DVI Port that came with a VGA DVI-adapter.  Tonight, my monitor went down.  Brand new monitor works with that? Any recommendations? Can I use an adapter?  If yes should which adapter I?

  You can use any DVI monitor DVI port directly or have any VGA monitor with the power that you adapter. A HDMI monitor might work with an adapter DVI to HDMI in a pinch, but HDMI tends to be more fickle.

• HP L1906 monitor: HP_L1906 with Windows 10 display does not work

  Under Win7 Pro, I used two monitors, a DELL and HP L1906 (my favorite).  After the Win10 upgrade, the DELL works just fine.  The HP is not displayed.

  In the settings the LP is detected, but under the name generic and none of the parameters of work, nor can they be saved.  I tried swapping the connections, thinking maybe Valentine's video, but always ended up with the monitor DELL works, not HP.

  How can I make my HP L1906 monitor works with Windows 10?

  (pro 64-bit)

  Hello:

  See if the vista driver works...

  I compressed upwards and tied the monitor driver below.

  Download and unzip the drivers in their folder.  Don't do anything with the files in the folder.

  Go to the Device Manager, expand the category of device monitors.

  Click the generic monitor p & p.   Click the driver tab.  Click on set to update driver.

  Select her browse my computer for driver software option and navigate to the driver folder, that you unzipped.

  Make sure that the include subfolders is selected and see if the pilot goes like this.

  Then restart.

• Is it possible to use a Linksys by Cisco Wireless - G Internet home monitoring camera with Labview

  I was wondering if it is possible to use a "Linksys by Cisco Wireless - G Internet home monitoring Camera" with Labview

  http://www.dabs.com/ProductView.aspx?quicklinx=53PX&SearchType=1&searchTerms=network+cameras&PageMod...

  I wan't to be able to get the raw data from the camera and analyze it.

  I found a simple soloution to this problem,

  Is possible to use a web browsers invoke node basically give a screenshot of the web page (get image)

  It can then be loaded into a display of the image and will show exactly what the web browser is showing and can also be analised by unflattening the pixmap.

  Maybe it's not the most effective method, but he turns my rig fast enough and does the job

  It may also be a setting value of the display of the photo to "smooth updates" that gets rid flashes white as the changes to the image, if anyone else has this problem.

• Cc of Photoshop [began to shoot pictures of my wines and place them with grain or noise above]

  my current photoshoo began to shoot pictures of my wines and place them with grain or noise on top. I tried to solve this problem without adobe success Ive deleted the program and downloaded without success on the issue of fixing.

  Make sure that Cache levels are set at least 4 under preferences > Performance.

• a few waves in my monitor working with the premier cc... my VGA Nvidia GTX 650 card. How to fix it.  drivers are updated.

  a few waves in my monitor working with the premier cc... my VGA Nvidia GTX 650 card. How to fix it.  drivers are updated.

  a few waves in my monitor working with the premier cc... my VGA Nvidia GTX 650 card. How to fix it.

• Problem of monitor 2311Hb with power lead sparks

  Hello

  I have a 2311Hb monitor, which has a noise of fissing of sparks where the cable connects to the rear of the monitor, is it a problem with lead or terminal? Introduce a had a similar problem, it stops if I touch the lead but begins again at random,

  I also tried to find the service tag was not on the unit has therefore Dell search which gave a number that says that the system is not valid! Any ideas.

  Sincerely

  Alexim

  Hi Alexim,

  Welcome to the community.

  It can be caused by the cable being loose. However, we can isolate if there is a problem with the cable socket on the monitor or power using a different power cord.

  If possible, check with a power cord different (there could be similar cord used on Tower system) and let know us the results of the same so we can advise you further.

  Thanks and greetings
  Sandeep P
  #iworkfordell

• U28E590D monitor connect with IMac 5 k (not compatible.?)

  Hey guys

  It's crazy to my imac 5K can find the monitor and connect too, but the monior is black.

  and when I connect the monitor with my macbook pro it works very well.

  try to go to system-> Preferences-> grouping windows display and then decrease the screen resolution until it works

• Laptop HP 15-ac153ca: pregnant with a fuzzy noise?

  My laptop makes a noise all blurry and weird. When I turn on a video and it's blurred, I go to the 'Search and solve problems with the devices' thing and let it scan my laptop. He will say that he had no problems found and then all of a sudden the audio on the video will be just fine.

  But when I click on a new video, the noise is blurred again so I have to scan my laptop for problems again so that he stops sounding weird. This just started happening today out of nowhere and I don't know what the problem is.

  I use Realtek High Definition Audio.

  Hello

  See if the fix described in the following document will help.

  http://support.HP.com/us-en/document/c05289563

  Kind regards

  DP - K

• Basis of adjustment of modes / monitoring LUT with SLog2 - F55

  Hello

  IM writing a function and possibly using the F55. Anyone help me with the following queries?

  Is it possible to shoot 4K XAVC 4:2:2 in S-Log2 monitor but still with a LUT?

  Ive been just read the manual. It seems the State-

  p. 50

  You can monitor only to READ when your shooting mode = mode MOVIE EI in your basic setting

  p. 57

  and you can only shoot in S-Log2 when your shooting mode = mode custom in your basic setting

  Rob Wilton

  DoP, based in London

  When you see how this camera images to look good, don't you think its on-board too early. the Slog2 looks great. It's a very nice picture to research which can be cooked in and for the clients/Director to examine to yet while preserving the dynamic range

  one thing I can say from experience, RED and ALEXA had a lot more problems and deficiencies out of the box than the F55

  Finally LUTS will work for XAVC too, but it having so far works fine for RAW. XAVC kicks *.

• HP 110-210 desktop: HP 110-210 - is two monitors supported with this model?

  Hi all

  I was looking at to the top of the plug the graphics card, I have to this desktop computer, and it seems that both monitors are not supported. Can anyone confirm if this should be supported.

  Integrated graphics card is ATI Radeon 8330.

  I currently have 2 monitors. 1 DVI and 1 VGA monitor. I couldn't make them work together. I was planing to get a VGA to DVI monitor so I can dual screen but wanted to know if his support again.

  MSChmuty, welcome to the forum.

  Yes, it should work fine with two monitors.  Here's a guide that will help you make the connections.  Also, here is a USB 3.0 video adapter that will allow you to use one of the USB 3.0 ports on the back of the computer to connect a DVI - D monitor.  That would give you a better picture.  You can talk with the Service the customer of StarTech to determine where one of their adapters would be best for your situation.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• Satellite A100-784 - external monitor flickers with AC adapter

  Hello

  I have problem with external monitor on Toshiba Satellite A100-784.

  _Problem 1: _
  External monitor blinks as a flag up and down when the adapter is connected to the laptop.
  What laptop works on this medication batery is ok. What is the problem of my od my laptop power adapter (graphics card) od something else?

  _Problem 2: _
  When I use samsung 22 "on batery then monitor does not Flash as a flag but pixels moves randomly left or right. I try to find new drivers for my graphics 945GM card, but on the toshiba support page there is an old drivers which was already instaled on my laptop.

  So, if you have any suggestions for me for problem 1 or 2 Please help a cant use my monitors :(

  PS Can use drivers from Intel official Page for graphics card?
  If I can't then I contact toshiba support team to release new drivers :).

  Thank you all.

  Hello!

  For your first problem, I think that the AC/DC adapter is faulty or it s a motherboard problem.
  This should be checked by a technician for laptop.
  I put t know what OS you use, but you can try to use the driver from the Intel Web site.
  There should be a more recent version available:
  [www.intel.com]

  Good bye

• LG 29UC97C - 29-inch ultra wide monitor problem with Mid 2015 MacBook Pro retina 15 inch laptop

  Hi guys,.

  I searched for this problem, but could not find anything on the net.

  Every time that I turn my monitor on my MacBook turns on as well, but after some time (15-20 min) TI off awards and who says no signal. So, I have to turn my monitor market again to use it.

  It is really strange, it happens every time. I tried with different mDP to DP cable, but the result is the same.

  My monitor is 29UC97C 29 "curved UltraWide monitor LG

  Notepad is retina of Macbook Pro 15 "(mi-2015)"

  Thanks in advance,

  GOK

  LG 29UC97C 29 "curved UltraWide monitor Support

• With differential measurement noise problems

  Hey everybody.

  I use an NI USB-6211, LABView 2011 and Win7.

  I'm trying to measure a voltage through a resistor using differential mode. But unfortunately im getting a lot of noise (on + - 25%).

  The voltage source I use is variable and can go up to 600V. With my diet I am essentially heat a metal plate.

  A parallel voltage divider is used to reduce the voltage by one hundredth (1 MOhm and 10 kOhm).

  Two wires attached to the lower resistance then go directly into analog input 0 + 8 of data acquisition.

  So if I'm trained 600V to the plate, data acquisition should get about 6V... and that's what I measure with my voltmeter attached to the acquisition of data input pins.

  I also tried these resistances of POLARIZATION and connected the + and - leads to the analogous to the ground like a resistance I used 10 k, 100 k and 1 MOhm and 2 MOhm and

  continue to receive a bad signal.

  Two sketches of the wire as a signal (100V, supposed to measure 1V, no CORRECTION) are attached to the post.

  Concerning

  EDIT: I forgot to write that I even tried an another NI DAQ and still get this noise problem.

  Also, I measured the voltage source signal using an oscilloscope and I see that noise. But the differential mode isn't supposed to

  reduce noise to a minimum?

  Hey everybody,

  come to understand that the voltage divider resistors are medium to high and they were the main reason for the noise

  problem.

  Before I used 1 MOhm and 10 kOhm, now I use 100 ohm and 100 kOhm and with a median filter in this regard, it works very well!

  But still, if I use the resistance of these BIASES they do not change.

  Concerning

• Laptop HP 15 - f111-dx: monitor binds with computer

  For descriptive purposes consider my laptop open.  The lower right corner of the screen binds with the upper right of the computer.  At the opening, a loud noise is heard when the pressure of the connection is released.  The plastic trim piece is broken as a result.  Same problem on my previous HP (Pavilion) and finally all broke out.  That's two laptops in a row with the same fault.  Sounds like a design flaw.  I want a new computer, but not another HP laptop 15 - f111-dx.  I'll take the loss on the first.

  You must make a claim and get them repaired. It is not guaranteed HP and we are colleagues end-users. I do not understand why you do not submit them for warranty repair at the first sign of the present.