monitor gets black screen

Similar Questions

• When you try to watch tv in Windows Media Center, I get black screen and audio sometimes and sometimes does not.

  Black screen in Windows Media Center during the TV

  When you try to watch tv in Windows Media Center, I get black screen and audio sometimes and sometimes does not. Any fix for it?

  TV works on the other program I have and has been workign on MC last week, but now I don't?

  Some success with this issue (its OK, but BLACK) video for live/recorded TV

  ' 1) ' disabled ' tuner card (Ati HD 650 PCIe) TV [via right click] in the Device Manager
  (2) restart Win7 64-bit
  (3) Win7 located & reinstalled the drivers
  (4) VOILA!   Real video and audio live & recorded TV

  BTW - before above fix in Device Manager:
  Notice anything in his video & Game Controllers
  'Properties' reported 'this device is functioning.
  "Update drivers" reported "... software driver...»
  ... and no updates of WMC anywhere in sight

  Go figure!

• HP pavilion 22xi backlit monitor goes black screen when using

  I have

  led screen have a HP Pavilion 22xi.  It is a year and no warranty left.  He started to go to a black screen when you use it.  I have to unplug the monitor for the display.  the power light lights up but won't stop him.  I saw a few ppl having the same problem, without success to get this resolved.  I tried external monitor on another laptop and have the same problem.  I replaced the AC adapt power and also downloaded the drivers for the monitor.  It's very frustrating.  I tried to reset to factory setting, and nothing changes.  It works for a while, then all of a sudden go to black screen and I have to unplug it from the back.  Please help...

  Hello @squiggy,

  I understand that your LED HP Pavilion 22xi screen just shuts off and will not turn off. After reading your post, it seems that the problem you describe seems to be a physical problem. Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html.
  
  I want to thank you for display on the HP Forums. Have a great day!

• Satellite A100-646 and external monitor shows black screen

  Hi all

  I have a similar problem with A100-646 (purchased in Italy). Computer laptop LCD and monitor external display screen black but without another problem at the start of the system. When the laptop is not used for a long time (half a year) it works for a week with no problems.

  Unfortunately, there is no adequate service in a place where I live. Perhaps, there is a power problem.

  Is there another idea? Does anyone have a service manual? ([email protected])

  Service manuals are available only for the technicians of the ASP.
  Unfortunately, it looks like a hardware problem, and therefore, you should get in contact with a technician for laptop to check defective parts!

• Just get black screen on Acer Aspire 7520

  I'm looking for a solution for this problem for almost 3 months now. My Aspire 7520 when tuned to just gives me a black screen. I took out the battery and held the power button down / stop and always the same. I also made sure that the fan has been free of dust and is runnig and I hear that it is trying to load, and now when I turn it off it is itself so I have to remove the battery all together.

  If you get either of the image on an external monitor, it could very well be a video card problem or a problem with the motherboard.  You should contact your local service centre Acer for assistance.

• Very slow to load the page Office getting black screen after the homepage at startup?

  On startup, I get a black screen with cursor after the homepage that it hangs for 30 seconds to a minute before the loading of my office and after that everything loads very

  fast? can someone help me with this please.
  Acer laptop 500hdd, mem 4 GB, vista sp2 Home premium 32-bit
  
  
  Gerry

  Hello

  No saving necessary data and re-installing Windows Vista might be the best option, but here
  are a few others.

  You can save your files by putting the drive in another computer as a 2nd disk (best) or external
  Drive USB enclosure and then backup to removable media such as CD, DVD or other USB drives.
  Of course a real store of the computer or the manufacturer of your system can help to recover the files.

  Or you can use a boot Ubuntu CD to back up data.

  Use Ubuntu Live CD to backup files from your Windows computer dead
  http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer

  --------------------------------------------------------------

  You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel
  -Double click - Driver tab - click on UPDATE driver - device Manager - map - graph
  then right click on the device and UNINSTALL - REBOOT.

  A method to try to get to the desktop (try in normal Windows Mode without failure) is CTRL +.
  ALT + DELETE - Manager tasks and tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - and then
  on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is available by
  repeatedly tapping F8 as you start. CTRL + SHIFT + ESC also begins the Task Manager.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all hotfix is usually a hit or miss
  base. That there is no information on a black screen as there is just a blue screen
  adds to the difficulty. Often using a restore point or Startup Repair will have no effect.
  You can try a google to see the proposed repairs, whom some have worked however these
  cover a wide field of efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a Vista disk? You can try restoring the system to it. If you do not have the
  discs, your system manufacturer will sell them at low prices. Or try in safe mode if you can get
  it.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can create a recovery disc or use someone even version (to do the system restore
  It only needs to be bootable).

  How to create a Vista recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI
  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation
  (if all goes well, the data records and need to reinstall programs). Don't forget to make a good backup or
  3.

  You can use another DVD that aren't copy protected but you you need to own
  Product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can do a repair installation that needs to save the data, but you will
  to reinstall the programs. This also requires correct Vista disks especially for OEM versions.
  You will need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (type in a single line or copy / paste a line at a time and then press enter - do not type)
  parenthesis or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)
  
  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• renamed authui.dll and get black screen

  Hi, last night I tried to make a customization of my computer, browsing the internet I found a bootlogon authui.dll from a trusted site. After taking possession of the original file and rename it to authui.dll.backup I could not make any change or copy a new to the system 32 folder. Once I restarted my pc to try to fix it by going into safe mode but the back is going in any mode the vista loading bar appears but then I get a black screen with the cursor and I don't get logons or whatever it is, keep it just like that. so is it possible to fix this or get a window command prompt in the start menu so I can rename my file in normal.i will be really grateful for your response. Sorry for my English

  Hello

  Have you tried selecting mode safe mode with command prompt from the start menu? Otherwise, you could try to load the Recovery Console by starting with your Vista disc. (If you do not, see:http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/). From there a system restore can also be a solution.

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• I uninstalled AutoCad 2013 after reboot I get black screen only. Windows 7 Explorer does not start

  I uninstalled 2013 autocad and autocad inventor of my laptop. I have windows 7 Home premium. Once the pc is rebooted, I get only a black screen with my curor. I tried to start in safe mode, but is samething.

  See if you can get to the "Startup Repair" via the F8 startup screen or your Windows Installer media if you have an installation DVD.  Try to run the "Startup Repair".

  Startup Repair.

  Startup Repair is a Windows Recovery tool that can fix certain problems, such as missing system files or damaged, that might be preventing Windows to start.

  http://windowshelp.Microsoft.com/Windows/en-us/help/f768809f-ED90-415f-a83f-89b42108b3551033.mspx#EFF

  How to use the command prompt in the Windows Vista recovery environment
  http://www.bleepingcomputer.com/tutorials/tutorial147.html

  You can even try a restore of the system of this environment.

  With the help of the environmental recovery of Windows 7 or Vista system restore
  http://www.bleepingcomputer.com/tutorials/tutorial142.html

  How to use system restore to log in Windows Vista when you lose access to an account
  http://support.Microsoft.com/kb/940765/

• 8.3.2 tools VMware (ESX 4.1) breaks PCoIP, get black screen

  I think it was a problem w / ESX 4.0 U2, (http://kb.vmware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1022830) install the tools of this version would break PCoIP. But now I'm under ESX 4.1 and 4.5 of the view and I get the same symptoms. I thought that this problem would have been solved now. Especially the KB does not mention the new version as being affected. There is nothing in the KB anywhere on the new version, having all the problems.

  My clients, both see the client and my wyse zero clients, connect with pcoip thin on their desktop with the old tools version 4.0.0 build-261974, but as soon as I upgraded to the version of the tools included with ESX 4.1, 8.3.2 build-257589 and try to reconnect on the desktop, I get a black screen for a few seconds then the connection drops.

  All works in this or run the latest tools with a number? Any ideas how to fix? I tried to uninstall, reboot, and reinstall and reboot again... does not help...

  I have not much except the Tools icon in the status bar indicates the user there is an upgrade, and as they can, they click it and do the upgrade of care... then of course, they break their connection... ugh!

  Thank you!

  Pseudo-device to work around the problem, try to uninstall and re-installation of the Agent from the view on systems running the 4.5 Agent view.  Just curious to see what is happening in this case.

  -Lazlo...

• Repair installation fails on Windows 7 and get black screen

  I put in a repair disc and then I put in a disk to reboot and did he pulled upwards so that I had to do a reboot but got black screen saying something was not so tempted excessible to esc but used left me tried to restart again and it will not restart please help running windows7 64 bit

  This is usually caused by hardware or software that is not compatible with Windows 7. If you have this problem, follow these steps:

  Wait about 10 minutes to see if the installation continues. Look at the led on the hard drive (often a small light on your computer that blinks when your hard drive is running) to see if there is no activity. If your hard drive seems to be working, the installation must be current. If your hard disk doesn't seem to work, go to step 2.

  Uninstall all antivirus software, and then restart your computer. Don't forget to enable antivirus software after you install Windows.

  If the installation fails again, it may be a hardware incompatibility problem. Go to the Windows 7 Upgrade Advisor on the Microsoft website to see if your computer can run Windows 7.

  If you have compatible hardware and your computer still stops responding, disable any unnecessary material. Remove (USB) universal serial bus devices. Remove or disable network cards, sound cards and cards of the series; and then restart the installation.

• Get black screen whenever I turn on computer

  I cheated with F2 and changed the boot device Configuration, first boot HDD & F1 device and accesses windows like that but it still does not start automatically whenever I turn on the computer, I have to hit F1 on the screen black continue

  Hi StressedMom,

  ·         Did you do changes on the computer before the show?

  I suggest to return the item and check if the problem still persists.

  Why my screen is black when I start Windows 7?

  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-screen-black-when-i-start-Windows-7

  Note: The article also apllies for Windows Vista as well.

  I hope this helps.

• After playing the game the Sims 2, impossible to shut down the computer, get black screen

  Hi all

  I am running Windows 7 Home Premium 64-bit, and I recently installed the Sims 2 DVD Edition. The game itself works very well. He's not planting or lag or cause my computer is turned off. I can walk much and create characters; what I noticed is that some of the sound effects play, which is minimal.
  However, after playing the game and I'm going to shut my computer down, the screen just goes black and the computer stays on. The processor will run nothing will work. The computer just stays, but the screen remains black. He doesn't even go to the "shutting down" screen or anything. Straight black. I let it stay like that for 15 minutes just to see if maybe, it was just to take some time, but the computer still shuts.
  It normally stops if I do not play Sims 2.
  Original title: Sims 2 causing my computer does not shut down properly?
  I think I have Directx 11, because when I installed my graphics (ATI Raedon 7770) it updated automatically to that. I play other games like Skyrim here, which does not cause this weird close the thing. I installed the patch from EA Games for the game itself, as well.
  Help would be appreciated, because I'd really like to be able to play Sims 2! If one of the expansion packs resolves that it be so. Anything to solve this problem!
  Thank you.

  Hello

  According to the Windows Compatibility Center, the Sims 2 game is not compatible with Windows 7.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/details.aspx?type=software&p=the%20Sims%202&v=EA&UID=1&l=en&pf=0&PI=0&s=Sims%202&OS=32-bit

  Method 1:

  I suggest you to install the program in compatibility mode and check if the problem persists.

  Please visit the sites below:

  To uninstall a program:

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  To install a program in compatibility mode:

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  If the problem persists, then I suggest you to contact the program provider for assistance with the issue more on the site:

  http://support.EA.com/

  Method 2: Clean boot

  When the computer starts to boot, programs non-Microsoft will not be started and would avoid any interruption of their share.

   

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.microsoft.com/kb/929135.

  Note: once you are done with the boot, follow step 7 article to set your computer to normal startup.

   

• Videos stopped playing on all websites, just get black screen. Fixed not clearing cache and cookies and restart in safe mode.

  Fixed not clearing cache and cookies and restart in safe mode.

  Your system details list shows two plugins Flash, a Flash 10.0 very old version you must uninstall (remove).

  1. Shockwave Flash 11.7 r700
  2. Shockwave Flash 10.0 r32

  Manually, see "uninstall a plugin:

  • https://support.Mozilla.org/KB/troubleshooting+plugins

  See also:

  • http://KB.mozillazine.org/Issues_related_to_plugins#Identifying_installed_plugins
  • http://helpx.Adobe.com/Flash-Player/KB/uninstall-Flash-Player-Windows.html

• HP Envy 15 notebook PC C8P47AV: black screen on laptop and also when I connect to monitor

  When I turn on my laptop I can see only a black screen.  I don't quite see the HP logo.  The hard drive seems to be spinninge I can hear the fan and the lights on the wireless and the caps lock are functional; believe so everything works well except the video.  I tried to connect to a monitor via HDMI, but you still get black screen after trying the F4 key.  There is no beep codes or the upcoming diagnostic lights.  Before I lost the video, I had taken the laptop fan because there was a message that he did not work properly.  Turned out a screw was stuck in there.  I removed the screw and replace the fan in.  Everything closed and turned on the laptop - no video.  I tried to re-seating the RAM.  Basically, I would like to see if people think it's the motherboard or the video chip that is the question; in this case, I'm going to buy a new laptop because motherboard costs about $200.  Also if anyone knows if there is a diagnosis of material that I could run that might give some beep codes.  I think that Dell has something where you hold D down and power on the phone to start the diagnostics.  Full disclosure this laptop fell a few times as well, so this problem can only await the right time appear.

  @gman2,

  Hello and thanks for the display on the HP support forums.  If you can, nothing appears on the screen or enter the bios at all this means you have a hardware problem.  You will need to contact the HP support by phone for repair at this point.

  Please use the following link to connect to the appropriate service.

  Contact HP support.

  Please let me know how things are going.  Thanks again for posting and have a great day.

• Get a black screen BIOS afer and before Windows logon

  So get a black screen after BIOS and before the Windows logon screen. I checked the RAM and one on two RAM sticks that was bad. But I still have the black screen. I tried an external monitor but still a black screen. I tried all the normal things (verification of the restore point disc, e.g. via the command prompt, startup repair, etc.) and no luck. I ran a test to check the hard drive, and it is impossible to find the hard drive. But then I ran AVG anti-virus, the AVG Live (bootable CD) and at the very start gave me this error: 106 error to the power of disk on life: 8768 (365 days + 8 hours) and underneath were basically the same error, just different numbers. But it still allowed me to run a scan and he was going through the files ok so she did not see the hard drive and files (contrary to the test of hard drive and yes the hard drive test was a bootable cd of same manf. like the hard drive), he found no virus. Even when I ran Defender in offline mode. Then I tried to re - install the operating system on the same drive with a cd. When he was going through the first part of the establishment where it was drivers and so forth: I kept getting the BSOD. Then I took the drive from the laptop and install it in another laptop but she has done the same thing, black screen, so I thought it was the hard drive. But then I begin another hard drive from the laptop and put it in the laptop original and he gave me the black screen and I know that the hard drive was good, she was an operating system that starts when I put it in the not troubled laptop. So any ideas anyone? Would it be possible that the all three things at once: RAM and hard drive laptop motherboard? Any help would be appreciated. Yet once, bios starts, just to Gets a black screen and does nothing after the bios but before the windows logon. The operating system is Vista and it is a Dell laptop, Studio. Any ideas?

  Thank you

  Don

  Hello

  Thanks for posting your question in the community of Microsoft Windows. I understand that you do not get black screen.
  I imagine the inconvenience that you are experiencing. I will definitely help you with this.
   
  To help you suggest several steps to solve the problem, I would appreciate it if you could answer the following questions:
   
  . Did you of recent changes made to your computer?
   
  Please follow the methods and mark the question below:
   
  Method 1:
   
  Follow the steps in the link below.
   
  What to do if Windows does not start correctly:
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly
   
  Note: When you restore the system to a previous state, programs and updates installed later will be deleted.
  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost
  Note: When you restore the system to a previous state, programs and updates installed later will be deleted.
  Warning: Before installation, you must be prepared for the worst scenarios that led to your existing data on your computer being removed. These data include data personal, settings, information about the hardware and software drivers. In case of a worst case scenario, you may have to reinstall all the programs. Make sure that you back up personal data to disks or other storage devices before performing a clean install.
  
  Method 2:
   
  How to fix a blue screen stop errors that cause Windows Vista to shut down or restart unexpectedly:
  http://support.Microsoft.com/kb/958233
   
  Note: When you restore the system to a previous state, programs and updates installed later will be deleted.
   
  Warning: Before installation, you must be prepared for the worst scenarios that led to your existing data on your computer being removed. These data include data personal, settings, information about the hardware and software drivers. In case of a worst case scenario, you may have to reinstall all the programs. Make sure that you back up personal data to disks or other storage devices before performing a clean install.
   
   
  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.