Monitor LCD Dell blurred the area to the right of all the data on the screen.

Similar Questions

• I had checked "extend my desktop to this monitor". I have only 1 monitor though. Now the screen is empty. I rebooted the pc in the hope to go in safe mode but the screen remained blank.__How can I go back to single screen? __

  I had checked "extend my desktop to this monitor". I have only 1 monitor though. Now the screen is empty. I rebooted the pc in the hope to go in safe mode but the screen remains blank.
  How can I go back to single screen?

  Hi Bilipino,

  You have more than one display card? Try to connect your monitor to the another card and see if you can get the display.

  Reference: http://www.microsoft.com/windowsxp/using/setup/hwandprograms/monitors.mspx

  I hope this helps...

• Monitor not displaying on the screen

  I just finished the Windows 7 Home Premium Upgrade (from Windows Vista Home Premium) on my laptop Dell Studio XPS 16.  Everything went smoothly except now when I connect my laptop to my Dell SW2409W 24 '' monitor (via HDMI), I'm having a small problem.  Even if Windows detects indeed the type of monitor properly and defines the resolution 1920 x 1080, it does not fill the entire screen.  There is a space 1-2 "black all around the outside.  I went to the start in the monitor settings (using the buttons on the monitor) to automatically adjust the display settings, but they are all disabled in HDMI mode.  The monitor works perfectly with my other computer and the laptop screen is very good too.  I updated the driver, and the driver for my graphics (ATI Mobility Radeon HD 4670).

  Any suggestions?

  Go to the center of control catalyst for ATI cards > select desktop computers and screens > go to the little tag on the monitor/s drop and select Configure. In the next window, select the 'Scaling Options' tab and check the box and drag the bar to the right to have your screen fill the screen.

  I had the same problem, thought about her experiences.

• On the EOS 60 d is the LCD display of the screen by default for aiming/development/taken view photo?

  When I turn on the camera and press the 'camera' button I can only see my scene through the LCD - the viewfinder is dark. If I press the button of the camera again, the viewfinder opens. Have I not the wrong preset somewhere?

  When you press the camera icon you activate mode live view, which shows what sees the camera on the LCD screen.

  Use traditional viewinder camera do not press this button.

  If you bought the camera used without a manual you can download one here:

  https://www.USA.Canon.com/Internet/portal/us/home/support/details/cameras/DSLR/EOS-60D/! c/p/z1/nZFb...

• I have a Compaq W17q monitor. The menu for the monitor keeps appearing on the screen and I can't turn it off. Can someone help with this problem?

  The menu for the monitor screen keeps popping up on my screen and I can't remove it with the menu button.  Help, please.  It interferes with the work on the computer.

  Contact Compaq support.

• My monitor works fine, but the screen is black.

  I just changed the battery on my motherboard.  Now, my monitor turns.  I know it works, because when I unplugged a message popped up telling me the monitor was disconnected.  When I plugged it in my green light showing something coming thru changed to orange showing nothing coming thru.  I restarted my computer to office twice and switch between the two outputs monitor.  I always get a black screen.

  Yes, I hit something else.  Big hands don't do too well in small spaces.  Thanks for your help!

• Dell computer laptop starts but the screen does not light

  Hello

  I have a laptop Dell older (studio 1558) and when I used it the other day, 'static' filled monitor image and then the screen went completely black.  Now when I turn it on, it seems that the computer starts well but the screen is black.

  Get yourself an external monitor, easy solution, right? -bad.  Unfortunately when I plugged my laptop in a separate monitor, the monitor (which works fine) showed no images.

  Still, I had this laptop for a few years.  I see about being 'easy' opening and closing of the laptop.  This has been the case in recent years, however, so I don't know if something has finally given...

  I'm not the best computer savvy so sorry if I was not more detailed... any ideas, what is wrong and how do I fix?  I rather would not somewhere that make me fixed.

  You will probably get a better response if you re - post it in the forum of the laptop and mention the version of Windows, too. (This is the forum office.)

• power off after freezing of the screen

  any help is appreciated greatly. while cleaning my closet dell b110, the screen froze, cursor movement lie, mousee light went out, ctrl alt esc, nothing helped, could turn off, so I killed the power. end waited 15 min, then powerded. things seemed ok loadup, but noticed the programs does not normally. I restored back to two days, but still not right. any suggestions?

  Content from another thread related to this topic:

  relitive to my question posted a few minutes ago, when I ran my cclearner, he won at 23% on cookies or the trash. really need help ;>)

  I can't understand how a clean boot will help you, but don't give the idea of 'expert' Microsoft Support engineer a shot if that's your desire.

  If that you have on your system without stop stop OK, sometimes this can cause corruption in the filesystem NT (NTFS).

  If it was me, I could run a check disk with error correction and see what it finds / corrections.  If there is nothing to do, then you have another problem, but I would start with this first.

  Click Start, run and enter in the box:

  Chkdsk /r

  Click OK and answer in the affirmative to the question about running chkdsk at the next system startup, and then restart the system and chkdsk runs.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  When chkdsk runs automatically restart, the results appear in the case where the watcher Application
  Newspaper.

  To view the logs in Event Viewer, click Start, settings, Control Panel, administrative tools, event viewer.

  A shortcut to the event viewer is to click on start, run and enter in the box:

  %SystemRoot%\system32\eventvwr.msc

  Click OK to launch the event viewer.

  Search the Application log for an event originally by Winlogon, something like:

  Event type: Information
  Event source: Winlogon
  Event category: no
  Event ID: 1001
  Description:
  Checking file system on C:
  The type of the file system is NTFS.

  A disk check has been programmed.
  Windows will now check the disk.

  CHKDSK checks Usn Journal...
  Audit of the USN Journal is complete.

  39070048 KB total disk space.
  25151976 KB in 78653 files.
  48256 KB in 10264 index.
  0 KB in bad sectors.
  237080 KB in use by the system.
  65536 KB occupied by the log file.
  13632736 KB available on disk.

  4 096 bytes in each allocation unit.
  9767512 total allocation on the drive units.
  3408184 allocation units available on disk.

  Windows has finished checking your disk.
  Please wait while your computer restarts.

  I prefer to run chkdsk /r from the XP Recovery Console so you can see what he does.

  You have a genuine XP bootable installation CD or you want to know how to make a bootable CD of XP (no XP media required) Recovery Console to run chkdsk /r from there?

  Here's how:

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget what you have (no XP media required).

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD (do not install UniBlue or the Ask Toolbar - never!):

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

• Red hue S2340L and intertwining of the lines on the left side of the screen

  Hello

  I have been using the monitor S2340L dell for the last 4 months. Now he seems to have a reddish tint on the left side of the screen. On a thorough inspection it seems also to be interlacing of horizontal lines. These lines don't extend to whole screen however, only about 5cm from the left at the border. the rest of the function of the monitor as usual.

  I did the test, in disabling the pc and pressing the keys 1 and 4 on monitor. It's still there. Please me tips on how to get this repaired/replaced product.

  * Back to the top of this Forum to monitor
  Open the monitor "FAQ".
  * Open "monitor and safety guarantees.

• Re: Satellite A135-S2276 - does not start, the screen is blank

  I have a Toshiba Satellite A135-S2276, I bought 2 years ago. It worked fine except the clock which has never kept the exact time since I bought it. I turned it off Sunday night as I do regularly. But he could not turn it on Monday afternoon. The power light is not on when you turn it on, but primer. The light remains on but does nothing. The screen is blank when feeding it works.

  Can someone help me with the answer? Thank you

  Dennis

  It's hard to say what is happening to your knees. You can access Bios? Try to connect the external monitor and see (maybe the screen of the laptop disappeared)...

• my keyboard the screen is as big as my office and I can't minimize it to the small size were it was at the beginning

  my keyboard screen about as big as my office is and he want to minimize to the original size how to proceed

  Hello
   
  1 did you change the resolution of your monitor?
   
  The size of the keyboard is also dependent on the screen for your monitor resolution. Increase the screen resolution and the size of the keyboard will adjust automatically.
  Reference:
  Change the resolution of your monitor
  http://www.Microsoft.com/windowsxp/using/Setup/personalize/resolution.mspx
   
  I hope this helps.
   

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• the screen image is slightly deformed on the widescreen

  I bought a new Samsung 23 "screen and select a resolution of 1440 x 990 as advised on broad implemented in the jubt menu.
  I thought that I had supported the silly PuTTY stretched images with this fix, but now I see, especially when I looked at a few pictures of myself that I look 20 lbs heavier because the screen image is just a bit too wide.
  I want full screen! In the window slider bar to adjust the resolution, there is no custom fine tuning number to pass to. I tried a bit slippery, and the choice of integer leapt to radically different numbers - not what I wanted.
  I need accurately and without distortion to my images since I use PhotoShop.
  How can I fine tune the "stretch"?
  Liz

  Hello lizlauter,

  1. open settings display by clicking the Start button, clicking Control Panel, appearance and personalization, customization, and then clicking display settings.
  2. under resolution, move the slider to the desired resolutionand then click apply

  Here is one link: http://windowshelp.microsoft.com/Windows/en-US/Help/0386b009-5f30-45c7-80c8-ff0395cc24091033.mspx which will give you some

  Tips to get your quality return to normal display. Once you get the set of parameters, also try to auto configuration button your monitor to fine tune the screen for

  your preferences. Hope this helps you. Let us know anyway. Make it a great day!

  "In the end the love you take is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

• On Windows Vista, my screen has changed to a "crushed" style of printing and images. Don't know what I did or how to change the screen again in an original format.

  Screen looks like a HD program display without the resolution in pixels

  Hello tollyho,

  1. open settings display by clicking the Start button, clicking Control Panel, appearance and personalization, customization, and then clicking display settings.
  2. under resolution, move the slider to the desired resolutionand then click apply

  Here is one link: http://windowshelp.microsoft.com/Windows/en-US/Help/0386b009-5f30-45c7-80c8-ff0395cc24091033.mspx which will give you some

  Tips to get your screen back to normal. Once you get the set of parameters, also try to auto configuration button your monitor to fine tune the screen for

  preferences (contempt if it's a laptop). Hope this helps you. Let us know anyway. Make it a great day!

  "And in the end the love you take, is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

• get a pop up on the screen saying lock shift is enabled or disabled

  I have a windows 7 PC Samsung RV510 and when I hit the caps lock key it does not say whether shift caps lock is enabled or disabled.

  Everything on the screen caps lock is via the software provided by the computer manufacturer.  In the case of may with a Dell laptop, the screen is a function of the software Quick Set of Dell.  I don't know if Samsung offers something similar.  Another option, you can watch, is that Windows 7 has an option to play a sound when the SHIFT key is hit.  Actually, I prefer since I did not look at the screen to be informed that I accidentally hit the caps lock key.  It is controlled via start > Control Panel > accessibility > change how your keyboard works.  (Or if you go to the search box of the programs and files immediately above the Start button and type "toggle", then "Change how your keyboard works")  Once there, but a check mark beside of the "turn ToggleKeys.

• To get a filter on the screen will appear

  Generally it looks OK at first then a blue light filter appears making it impossible to distinguish the colors

  This is probably a hardware problem.   You can check if the problem occurs in safe mode to confirm.  Given that this happens after some time for the dust clogging and overheating problems.

  Is this a desktop or a laptop?
  If your desktop - if possible, try another monitor to help determine if the monitor or the video hardware is at fault.  Check the video cable also connections.
  If a laptop trying to connect an external monitor to determine if the screen or the video hardware is at fault.