Monitor not turns off when I close the lid!

Similar Questions

• Laptop shuts off and turns on when I close the lid

  Hi, I just bought a HP Pavilion 15-n253sv and I noticed that when I close the lid its turns off instead of getting in standby mode. Also when I stopped it, and then I close the lid it lights up. Its like the on off button. Is it a hardware problem that I must return the laptop? I checked out the settings and it is said that when the lid is closed it just goes to the standby mode. I have win 8.1.

  Hi Biliou,

  Welcome to the Forums of HP Support!

  If I understand you correctly, your computer shuts down when you close the lid, and if it is turned off and you close the lid it lights.  I think you are right to think it's a hardware problem. You can contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click on the link to get help from your region number. Contact HP worldwide

  I hope that this helps, please let me know how it goes.

  Thank you and have a great day!

• Display does not turn off when attached to the ear during a call

  When you hold my iPhone 6 up to my ear during a call, the screen is not turn off and disable the buttons. The sensor is not broken, because the auto brightness works very well. It is just inside the calls when he won't work. Is there a setting to turn off the screen when you hold it to my ear?

  JBS - GUY says:

  When you hold my iPhone 6 up to my ear during a call, the screen is not turn off and disable the buttons. The sensor is not broken, because the auto brightness works very well. It is just inside the calls when he won't work. Is there a setting to turn off the screen when you hold it to my ear?

  The proximity sensor and ambient light sensor are two different things. The fact that your ambient light sensor works you says nothing about the functioning of your proximity sensor.

  You get a deal on the phone? A screen protector? If so, remove them and test again. If the screen does not always dark, you may have a hardware problem.

• Equium A100 - screen turns off when I open the lid completely

  I recently had a problem with my Equium A100, as when I open the lid fully, the screen turns off.

  However, when the half open, the screen is completely visible.

  I have attempted to open the screen and can not see loose cables to my knowledge.

  Any help on how to solve the problem would be appreciated.

  I agree with Akuma. It sounds like a hardware problem and probably the contact loses when you open the lid.
  The cable screen should be checked and probably replaced.

• My turns Windows Vista Home off when I close the lid and custom back on unless I restart my computer wireless

  I have a Toshiba laptop Windows Vista Home. Recently, every time I close my laptop lid, and try to turn it on a few minutes later, the wireless devices were disabled. When I try to reactivate it from ConfigFree on wireless network connection to activate, it said everything was active except for wireless devices. The only way I can turn it back on is by restarting my computer. It only started happening recently and for first of all, I would stay on. No idea what's wrong?

  Hello

  Maybe this can help.

  Assuming that the signal is strong, and that there is no noise in the electrical environment (http://www.ezlan.net/wbars.html ).

  Uncheck the box to the NIC of energy economy (I.e., do not leave the card save energy).

  There may be some variations on where is the energy saving setting.

  Here are a few examples, YMMV, look around your systems.

  Example, http://www.ezlan.net/example/powersave.jpg

  Example, http://www.ezlan.net/Win7/power_sav_wireless..jpg

  Example, http://www.ezlan.net/Win7/power_save_win7.jpg

  Example, http://www.ezlan.net/Win7/adv_power-sav.jpg

  ----------------------------

  Still a problem?

  Check support for the router and make sure that your using the latest firmware for the router.

  Check the support site for the manufacturer of the computer and make sure that you use the latest drivers.

  If the support site has a newer version of the drivers and installed current ask drivers the most up-to-date drivers use this method.

  Download the drivers and extract them to a folder of your choice.

  In Device Manager, right-click on the adapter.

  Click Update drivers and choose her browse my computer for drivers.

  Choose let me a list of choices, click on disk and point to the folder with the drivers.

• Satellite A100-049 - how can you stop it turn on when you open the lid?

  I don't see any option to stop this in the BIOS or otherwise but it annoyingly turns on when you open the lid. I stopped it turn off when you close the lid, but prefer that he remained turned off when you open the lid.

  Any ideas?

  Hello

  I assume you are using the Vista operating system.
  Have you checked the Power Options OS located in the control panel? Do it!

  But a question; Why you use n t stop him if you n t want to turn on the laptop by opening the cover.

• printer do not wake off mode 'sleep' and does not turn off when the Start button / stop pressed or pushed.

  HP printer all-in-one B210a win 7 64 bit.

  no error message just don't wake up from power saving mode and does not turn off when the power button is pressed. must be disconnected and then turned back on. works fine until the power saving mode he did go to sleep then not answer the test print command or Toolbox controls.  power saving mode is turned off, but still goes to sleep.

  First, you will need to make sure that the printer is under warranty.  You can do it here.  So, if you are in warranty, you must contact HP at 1-800-474-6836 and the United States in computer science, international users click here.

• Windows 8 do not sleep when I close the lid

  I just got the Elitebook 850 G1 and I put all the parameters of sleep when I close the lid and wake up when I open it. I checked the two settings in windows and in the BIOS and it's all good, but when I do actually, he does not wake up but restarts the computer instead. So when I was away typing on Word, fortunately I constantly save it but it's not back to where I left off. I thought it was one of the graphic drivers first, because he has dual graphics, intel and ati. He had a few problems with the ATI card, but I think that I fixed it. I am running windows 8.1 Pro.

  What can I do else?

  Edit:

  I tried changing the settings to hibernate instead, and what he gave me was a BSOD.  Video_dxgkrnl_fatal_error. I remember that what made the first time I tried to do it before when he was on the way 'sleep'. any suggestions?

  is not serious, I fixed it. It turns out that the new graphics driver intel was the culprit. I had to revert to a previous version. works perfectly now

• My computer it does not turn off when I go early and turn it off?

  My computer it does not turn off when I go early and turn it off? u can help me, please!

  Hello

  ·         What operating system do you use?

  ·         Did you do last changes made on your computer before the show?

  If you use Windows 7 or Windows vista, I suggest you to follow the steps in troubleshooting this article and check if that helps:

  You can't do a computer that runs Windows 7 stops or sleep

  http://support.Microsoft.com/kb/977307

  If you use Windows XP, see:

  You cannot log off, restart or shut down your Windows XP-based computer

  http://support.Microsoft.com/kb/831431

  See also:

  Turn off a computer: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/turn-off-a-computer-frequently-asked-questions

• Computer will not be put into hibernation when I close the lid

  I have a problem with my laptop. It is a series of Toshiba C55. When I close the lid it will not be in hibernation, even if I set power options to do so. This happens not all the time, but it happens enough that it's boring. If I close the lid and it will not be in hibernation, which means that it is in danger of overheating if I put in my backpack. If I use the start menu, it just goes to the lock screen, that's what I suspect it is when I close the lid. Help on that would be great.

  Hello Michael,

  Please keep us updated on the status of the issue.

  I appreciate your time and your efforts.

  I suggest you to update BIOS and drivers from the chipset and check the issue.

  Please update the chipset drivers from this link:
  http://cdgenp01.CSD.Toshiba.com/content/support/downloads/tc50157200c.exe

  Update the BIOS from this link:
  http://cdgenp01.CSD.Toshiba.com/content/support/downloads/scf6v140.exe

  Note: Changing the BIOS / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes of the

  the settings are at your own risk.

  I hope this helps.

  Thank you

• How can I keep the laptop and find only the external monitor when I close the lid?

  Original title: external monitor

  I want to use an external monitor with my laptop Vaio Windows 8, but when I close the lid, both screens will disappear.  How to keep your computer on and display only the extgernal monitor when I close the lid?

  I want to use an external monitor with my laptop Vaio Windows 8, but when I close the lid, both screens will disappear.  How to keep your computer on and display only the extgernal monitor when I close the lid?

  Hello

  Perform the following steps.

  1. press the Windows key + X to display the System menu.

  2. Select Control Panel.

  3. Select the Power Options.

  4. in the left menu, select Choose closing the cover .

  5. look in the section of power and sleep buttons and lid settings .

  6. use the drop-down menus of the section when I close the lid , and then select do nothing for both options.

  I hope this helps.

  Concerning

• Why my LAN adapter off when I close the laptop?

  Why my LAN adapter off when I close the laptop?  This also occurs when the laptop sitting too long.

  Once the laptop starts up, the LAN adapter must be reset due to a "no valid IP Configuration".

  Why?  Help please!  Thank you.

  In the find top-right panel ' view by '. It is probably set to "Category" view, use the selector drop-down list to choose "small icons". This makes it easier to find for each option.

• Satellite A200 AH3 stops instead of standby when I close the lid

  Hello

  I have a laptop Satellite A200 AH3. When I bought Windows Vista was preinstalled (I still drive recovery). When I closed the lid of the previous day (I mean the monitor turn off the HD, the cooling fan and all the rest). The light On / Off on the laptop turned to a flashing orange light.

  Then I opened the lid and Windows prompted me to the logon screen. This process occurred when the laptop starts on the battery, not when it is plugged. Everything was going fine.

  But I formatted the HD to install WIndows XP that I bought Windows vista seem to be too heavy for my laptop. So I installed Windows XP and the driver and the software available on the Toshiba site. Now when I close the lid, the Windows shut down very quickly (about5-6 seconds). However, it is a real firm. When I reopen it cover anything happen.

  Then I press the power button / stop and start Windows, normally (no screen saying that windows close annormally and no Safe Mode boot option). Even if I change the setting in the control panel/power Option or the Toshiba Power Saver, utility and I put them to sleep, he always make a stop down.

  How do I restore that?

  Hello!

  Have you downloaded the BIOS for Windows XP?
  For the Satellite A200, there are two versions available; one for XP and one for Vista.

  Also, make sure that you have the latest graphics card driver and keep your XP to date.

  Good bye

• When I close the lid on my laptop, random programs begin to run.

  1. so here's the deal:

  I have laptop Dell XPS L502X in Win7 Pro;

  b. out of nowhere, and all of a sudden the next irritating problem started havoc. When I close the lid on my laptop at night, random programs begin to run. The desktop icons move into other folders or the trash. It changes the size of the larger icons... it changes even the settings 'snap to grid '.

  2 until you tell me to turn it off or put it to sleep extended mode... I need to let you know that I need to leave the mobile "awake" so that it downloads my incremental changes to Carbonite cloud, as well as my local/resident of mirror [Carbonite] drive.

  3 oh yes: I also went up to disable the 'mouse' integrated glidepoint device, too: same result... madness.

  4 I jumped every hoop I can think... to run the diagnostics runs each available from Norton 360 scan... Online / remote - to both Norton AND Microsoft support.

  Help!

  Original title: HELP HELP HELP! My computer has gone NUTS! When I close the lid for a short period of time, it starts to launch/open/program files on my desk... Ouch!

  Hi Benjamin,

  I can understand your annoyance in that regard. I appreciate your effort posting this query to the Microsoft Forums.

  I would be grateful if you can provide us with information to help us better understand the issue.

  1. Did you change in the computer before this problem?
  2. What types of files are open when you close the lid of the laptop?

  Please provide the Event Viewer logs to resolve the issue and the screenshot of the desktop icons.

  Check out the link to check the Event Viewer logs.

  https://support.Microsoft.com/kb/308427?WA=wsignin1.0

  Note: However, the link is good for Windows XP, you can check the link to check the computer for Windows 7 Event Viewer logs.

  I suggest that we do a system restore to last good configuration.

  You can check the link below to perform a restore of the system.

  http://Windows.Microsoft.com/en-us/Windows/system-restore-FAQ#1TC=Windows-7

  Note: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  I also suggest you to see the link to create a restore point.

  http://Windows.Microsoft.com/en-us/Windows7/create-a-restore-point

  Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.

• When I close the lid on my MBP, it goes to "Standby" to "Hibernate" why?

  My MacBook Pro for six years had been working perfectly until about a month earlier, when he stopped to stay in Mode standby when I closed the lid.

  With the lid closed, initially, he goes to sleep, but after about 30 seconds, it goes into hibernation mode and to turn on again, I have to press the power button. I then get a grey screen and no use of the trackpad. Shortly after, the gray screen disappears and the machine works perfectly.

  The battery life is very good (68%), I have reset the SMC and I have not loaded the new software. The only thing I can think is that this started to occur at the time of the last update of Safari.

  Does anyone else have this problem?  Comments or suggestions are appreciated.  Thank you.

  Hello, Spring Lake Bob!

  Thank you for using communities Support from Apple. After reviewing your post, I understand that your MacBook Pro sleeps as expected when you close the lid. Instead, it goes into a hibernation mode that requires you to press the power button to interact with him again. I certainly understand wanting to make sure that the computer sleeps when it should wake up how it should. I'd be happy to help you!

  Get help with your situation, I would say using the article below the link to help isolate and solve the problem of sleep.

  If your Mac does not sleep or wake up when expected

  See you soon!