Monitor not working no not after update...

Similar Questions

• Windows Live Mail does not not after update kb2454826

  Windows Live Mail does not not after updating automatic kb2454826

  Windows Live Mail stops responding or does not start after the installation of KB2454826 (revision 10 Feb-11)
  http://support.Microsoft.com/kb/2505524 ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• For hp dv7 fingerprint reader works does not after update to 8.1 windows

  Hello

  I upgraded Windows 8.1 Windows 8.  Before updating the finger print reader worked. I used it to connect to websites in any browser Firefox. I also logged into windows with my fingerprint reader and the screen unlocked the same way.

  I have updated all the drivers according to the instructions on updatig before windows 8.1 and after update.  I checked that everything compatible with windows 8.1 again by the instructions before putting up-to-date.

  After that update the drive light will not read the finger scan and the light does not illuminate. I went to the control panel to check the driver and he was later. I ran the windows driver verifier and on the HP site checked for validity sensor driver is up-to-date.  When I open simple passage it says congratulations you can connect in the window by the touch of the finger. When I go on Internet sites I have red cells connected with simle pass, he now seeks to connect with the password "master."

  Any help would be appreciated!

  Thank you

  BattleAngelita,

  Welcome to the HP Forum.

  Does the SimplePass asks your for your master password Windows means that the program has survived the process of upgrading to Windows 8, 1 - somehow.

  You can start with the following:

  • Create a Restore Point > create a restore - Win7 Point ORcreate a restore point Win8 
  • Close all your programs and shut down your computer
    • Unplug everything (little unifying for the keyboard / mouse external can stay)
    • Perform the Hard Reset for your laptop
    • Start the computer and connect
  • Check is SimplePass himself has sorted them.

  ==========================================================================

  You can try to update your SimplePass program to the latest version in the series of version 6.x.

  Before you do this, read and follow the instructions to export your Webcards in your .tsd file.  Regardless of whether the Web site connections are working right now; you need this backup in case you lose your HP SimplePass program (thanks to the complete removal / reinstallation or if corruption).

  Then, consider updating the HP SimplePass program to the latest version 6 series.  If you are already using the latest version, consider other options in the guide, including the "Repair SimplePass" procedure.

  Open the file > click Download > click 'open in Adobe Reader.

  Simple Instructions for upgrade HP SimplePass

  Click on the thumbs-up Bravo !

  It's a nice way of saying 'Thank you' for help.

  While I strive to reflect best practices of HP, I do not work for HP.

• Windows 7 Media Player not working not not after update

  I recently installed updates on my PC. I am currently running microsoft 7. Now my Media Player will not work. Nor I can play YouTube videos on the web. Videos on the web come in white & if I try to open windows media player I get the following error:
  Setup_wm.exe - Application error
  The application was unable to start correctly (0xc0000005). Click OK to close the application.

  Please help me solve this problem. It worked fine before the update.
  Thank you.

  Hi Kallaher'sFamily,.

  ·         You use Internet Explorer? If so, what version of IE are you using?

  ·         The updates have been installed?

  Follow these methods.

  Method 1: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  Note: After the boot minimum troubleshooting steps, follow step 7 in the link to return the computer to a Normal startupmode.

  Method 2: Uninstall and reinstall Windows Media Player from Windows features turn on or off. Follow these steps:

  (a) click Start, type the turn Windows features on or off in the start search box and press ENTER.

  (b) uncheck the features of media.

  (c) restart the computer and follow the same steps to reinstall windows media player.

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-features-on-or-off

  For reference:

  The video problems with Internet Explorer

  http://support.Microsoft.com/kb/2532294 (if you use Internet Explorer)

• Optical Mouse 2.0 not working in win8 after update

  I have a Microsoft Wireless Optical Mouse 2.0, I was so happy in Windows 8, after I found the mouse in my attic and I decided to call it my Gaming Mouse, but the last time that I've updated Windows 8 when I try to connect it says it dosent it rechonize what I could do?
  I tried updating the driver but I don't think that I did it correctly

  Help?

  Hello Gilberto,

  Welcome to the Microsoft Community forums. According to the description of your problem, I understand that the wireless optical mouse does not work after Windows Update.

  (1) did you check the mouse on another computer?

  (2) the updates have been installed lately?

  (3) how the OP tried to update the driver?

  Follow the method for troubleshooting steps.

  Method 1:

  I suggest you uninstall and reinstall the mouse driver prior to this driver update and check.

  Follow the steps to update the driver.

  (a) press Windows + X.

  (b) click on Device Manager.

  c Expand wireless mouse).

  (d) right click on the mouse. Click on set to update driver.

  After updating the driver, restart the computer and check.

  If the issue still persists, uninstall and reinstall the driver.

  Follow the steps to uninstall the mouse driver.

  (a) press Windows + X.

  (b) click on Device Manager.

  c Expand wireless mouse).

  (d) right click on the mouse. Click on uninstall the driver.

  Method 2:

  I suggest you update the driver.

  Refer to update the driver.

  Material:

  http://www.Microsoft.com/hardware/en-us/downloads

  Method 3:

  I suggest you to run the hardware troubleshooter.

  Follow the steps to run the hardware troubleshooter.

  a. press the keys Windows + C on your keyboard to show the charms.

  b. type Troubleshooting , and then click solving problems under settings.

  c. now, type Hardware Troubleshooter in the option Search .

  d. click convenience hardware store to run the troubleshooter.

  If the problem still persists please answer we will be happy to help you.

  Thank you.

• Cross-dissolution/fade-in works DO NOT after update 2015.1.

  After downloading the latest update, 2015.1, I can place is no longer just a fade at the beginning of a clip in my calendar. Rendering BOTH CUDA and open CL settings, I can not just hit (cmd + d) at the beginning of a clip to normally add a fade in. It's something I do often and thus prevented from having this option are extremely frustrating. The feature works however when I select a renderer 'software only '.

  Also, I was hoping with this last update that Adobe would have set troubling blue lines that appear during hover and playback while scrubbing on the rendering engine "Open CL.  Are there known solutions to this?

  I have a related to an entry of the crossfade screen does not. Any input would be greatly appreciated!

  Cross of dissolution does not work in the first update on Vimeo 2015.1

  Hi Matt,

  We have reproduced this issue and the respective team was informed. Sorry for this BUG can be reproduced on 10.11.2 so but only with 9.1 update Premiere Pro.

  Now you can use the software only mode or OpenCl in the project settings > Renderer. Also, you can restore the version 9.0.2 update.

  Vinay

• Bluetooth audio in car works doesn't not after update (23.4.A.1.232)

  Audio Bluetooth was working fine before the update.  After the update: the phone connects to the car stereo (I can tell because the radio watch phone info (name, battery level, antenna bars, etc.), but when I play audio there is no sound from the car speakers (or phone).)  Anyone else seen this?  Anything else I should try to reset? I tried to close all applications, restart the phone, then by examining the parameters for what whether that could have an impact on the audio routing - but see nothing.  Thank you.

  Hi @tbird20d

  Please, your home screen try the following:

  1. tap the icon of the Application screen.
  2. search for and tap on settings-> Apps.
  3. slide the tab all.
  4. search and tap on the Walkman.
  5. Press stop Force-> clear data.
  6. restart the phone.

  I m at disposal for any question.

• e-mail does not not after update

  After the last update one of my email accounts does not work. I have a total of three. Both AOL and a Gmail. An AOL and Gmail are fine. He asked my password to another AOL. He does not however; I can't connect to it on the internet. I restarted. When I connect to internet it says password is required for the IOS to work. I put the password and click done and he's no the case. I am able to use this e-mail on my iPhone and MacBook. Any suggestions?

  Remove the password in Keychain Access (Applications/Utilities). While there, menu Keychain Access of relief.

  The problems of Keychain - see post of khati

  Apple Mail troubleshooting

  Connection/window/mail doctor show what? If the server is red, select it and observe the box show details.

  Send and receive e-mails of troubleshooting

  Troubleshoot sending e-mail messages

  Post not send or receive messages after updating to OS X

• USB mouse does not not after update. Windows detects that usb is connected

  after update to windows 8 my usb mouse stopped working drivers are up to date and clean. tried turning off then turning, resettlement, but nothing does. After a few minutes that its connected it also plays the "detected usb device" then removed "usb device" ringtone It can be connected to my problem.

  Hello

  Thanks for the info and sorry for the late reply.

  I suggest you to run the Microsoft fixit and see if it helps:

  Diagnose and automatically fix the Windows USB problems

  http://support.Microsoft.com/mats/Windows_USB_diagnostics

  Please reply with the results, in order to help you solve the problem.

  Thank you

• G560 icons on the desktop appearing does not after updating drivers

  Hi all, after updating the drivers on my G560 related to volume up/down icons, and other features appear more on the screen. For example if I turn off audio or wlan (fn + f5) I can't see these icons. Is it possible to restore them? Thanks Giovanni

  re power management - install.

• Add-ons - works does not after update

  Since the update to Firefox 42, I had to refresh it and among a long list of other problems my modules do not work. When I click on tools > Modules I get the error message "cannot find server".

  How to solve this?
  Thank you.

  • 1 Download Firefox for all languages and systems v42 {web link}
  • 2 Uninstall Firefox on your computer {web link}
    DO NOT REMOVE your profiles.
  • 3 after that, restart the computer. Then, run the full installer.

• MIC not working not not after update 9.2

  After the download and installation of 9.2 update, my iPhone 6 s more than 128 GB microphones do not work properly. I call tell my sounds of strange voices and it is difficult to hear me.

  "Hey Siri" no longer works. When I commit Siri via the home button, Siri do not hear what I say when I talk in a normal voice. If I scream, Siri misunderstands what I say.

  When I use the headset, everything seems to work well and improves the quality of phone calls.

  Any suggestions?

  I already have an appointment with the Genius Bar the next week.

  Force restart your iPhone to see if that makes a difference...

  Press and hold the Home and Sleep/Wake buttons for at least ten seconds, until you see the Apple journal.

• Webcam works does not after update

  After a recent update on my Windows 7, no webcams work longer. Locate the can´t system, as are they connected werenâ´t.

  I have can´t reinstall the device drivers, because I have a Microsoft LifeCam VX-500, and its pilots are supposed to be a native component of Windows 7. I also tried with other devices, and none of them does not work either.

  After a recent update on my Windows 7, no webcams work longer. Locate the can´t system, as are they connected werenâ´t.

  I have can´t reinstall the device drivers, because I have a Microsoft LifeCam VX-500, and its pilots are supposed to be a native component of Windows 7. I also tried with other devices, and none of them does not work either.

  You can always reinstall drivers even if they are native in Windows. Go to control panel and open the Device Manager. Look down the list of all references to your webcam (video, microphone, etc.). They may appear with a yellow! mark indicating there is a problem with the driver, or they might not. If none does everyone try to enable 'Show hidden devices' in the view menu. For each entry in webcam that you find, right-click on it, select properties then driver. Click on the button that says "roll back driver". The earlier work driver should then re - install.

  If the Roll Back driver option is disabled which means there is no new driver installed. You can always reinstall the driver however. Right-click on each entry in webcam and select uninstall driver. When it is unplug your webcam. Reset is optional, if not plug your webcam into even once (in a port on the computer NOT to a hub) and Windows should re - detect and install the drivers again.

  In case it was an update of the driver who caused your problem when you rolled back each of the webcam drivers and tested the camera working again, go to Windows Update and look for the updates. The problem with the driver should appear again. From the screen to view updates (the one with the details on upgrades), right-click on the update of the webcam driver and select "hide update". After that it shouldn't bother you again.

• External microphone does not work do not after update

  Computer does not recognize my external microphone after an update.  How can we solve this problem?

  The computer recognizes the headset but not my external microphone.

  Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should help

  Remove the driver current completely and install the latest driver available.  For instructions on how to do read everything to update the drivers of my partner JMH3143 http://answers.microsoft.com/en-us/windows/wiki/windows_other-hardware/updating-a-driver/a5e6345e-af9b-4099-bef0-8d22254aa1c1?tm=1436753520149 here

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

• App update work does not after updating IOS 10

  Hi guys,.

  After the update my 6plus iphone to IOS 10 yesterday, I have a problem with the update of the applications on the Itunes store. Updates are not downloaded. IPhones shows it starts the download but nothing happens.

  Tried via 4G and Wifi but no difference.

  Help much appreciated.

  Thank you

  TBirdGarage

  Restart your iPhone, and then try again.

  1. Press and hold the sleep/wake button until the Red slider appears.
  2. Drag the slider to turn off your device completely off.
  3. Once the device turns off, press and hold the sleep/wake button again until you see the Apple logo.