Monitor poster No. signal then goes to sleep

Similar Questions

• my computer has been out sporadically, the monitor only has no signal and goes to sleep

  I have a PC who recently acted squirrels.  It start partially, completely, or run for hours and then stop.  Once it turns off it won't do it again.  If I unplug it I try to run the next day and it worked but only for limited periods.

  Hello

  Could be heat related - try using a small fan to blow into the air intakes to see if that helps.
  It is just like it loses power or stop it in the normal way? Keep in mind
  This associated heat does not always mean too much heat as it is often a part or a component
  who is too sensitive to normal levels even heat.

  Remove ALL power and reinstall all the memory cards and cables (both ends where possible).
  in fact, remove and replace - don't do not just tight. Remove the dust bunnies and clean the
  air vents. Check that fans are working (before and after opening the case). When your laptop on all the
  You can do is to reinstall the memory and clean the vents (still may try to add a small fan as a
  test).

  This sounds like material so if the above does not help you then probably need help
  a real computer store (not the leeks and the glances at a Best Buy or other stores) or the
  Support of system Maker.

  ===========================================================

  Check with these utilities to see if information may be collected: run BlueScreenView
  to see if there were any BlueScreens and verify in MyEventViewer at shutdown
  (or a few seconds before) See the event log contains useful information.

  It is an excellent tool for displaying the blue screen error information

  -Free - BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  and displays information about all accidents of a table.
  http://www.NirSoft.NET/utils/blue_screen_view.html

  -------------

  MyEventViewer can be verified at the time of the blue screen (BSOD) or event within a second
  or time of the BSOD or event to provide more information about the possible cause - see TIP.

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
  Set it a bit before and after the time of the event or BSOD.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  ------------

  AppCrashView - free - a small utility for Windows Vista and Windows 7 which shows details
  application of all accidents occurred in your system. The information breaks down is extracted from the
  .WER files created by the Windows Error Reporting (WER) of the operating system component of each
  time that an accident has occurred. AppCrashView also allows you to easily record the list of accidents to
  text/html/csv/xml file.
  http://www.NirSoft.NET/utils/app_crash_view.html

  ------------------------------

  Also do this so you can see the probable bluescreens. (You may or may not be able to see
  them if they occur even after doing this according to the cause.)

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  (also Windows 7)
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  =========================================

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• hp2009 monitor turns on says no signal goes to sleep mode.useing a hp6000

  power system off and then on again, lights monitor says no signal and goes to sleep

  Hey there @mholmes940, I thank you for joining the HP Forums!

  I understand that the monitor says no signal and goes to sleep.

  Please try a few steps mentioned below.

  Click Start, Control Panel, system and Maintenance and then click Power Options.
  Select high-performance, and then click on change plan settings.
  Change the settings to never.
  Click on the button Save changes to accept the changes and restart the computer.

  Also make sure that the graphics card is up-to-date.
  1. open Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager.
  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. in Device Manager, look for graphics card you want to update, and then double-click the device name.
  3. click Driver tab and click on set to update driver and follow the instructions.

  Additionally, make sure that the cables that connect you to monitor are correctly connected, or use a different video cable.

  I'll watch for your reply.

  Have a great day!

• Monitor says no signal after moving the computer

  need help to make the monitor iluminate

  My windows xp is just moved to another room with a new distance map and functioning. After the move, the monitor says no signal! The computer and the monitor seems to work but the screen goes black after showing NO SIGNAL and goes to sleep.

  One step at a time.

  Also, I would also like to make these windows xp and windows live units communicate with each other in my home group.

  Bill enjoy life

  Hello

  I suggest you to check the physical connection that is connected to your computer?
  I suggest you to follow the steps and check.

  No input Signal message.

  Cause

  This problem may be caused by one of the options below.

  1. Monitor not connected correctly.
  2. Faulty hardware

  Solution

  Monitor not connected correctly

  Verify that the monitor is connected to the back of the screen, as well as the back of the computer.

  If the monitor seems to be connected correctly, check that a cable is not loose by disconnecting any cables that may be disconnected at the back of the screen (usually the data cable cannot be disconnected). Then unplug the data cable connected to the back of the computer, and then reconnect the cable. By connecting the cable to the back of the computer, ensure that the cable connection is strained. Most computers will also have the ends of screws that can be screwed to keep the connector in place.

  Faulty hardware

  If the connections look OK, unfortunately it is likely that the monitor or the computer graphics card is bad. To test this component is bad, either connect a different monitor to your computer or connect your monitor to another computer.

• HP 2509 b monitor guard displaying "Input Signal Out of Range" and then go to sleep.

  I went on vacation and shutdown my computer for 2 weeks.  My monitor worked great for a month before.  I came home last night and turned on my system this morning.  Now I get a white message in the middle of the screen with "input out of range Signal. Change the settings for 1920 x 1080 at 60 Hz"and then the screen goes to sleep.  I can turn the monitor off, wait a moment and then turn it back on again, but continues to repeat the same thing.  I checked and the screen is already set to 1920 x 1080 at 60 Hz.  I use VGA and have the default positioned like this.  I followed the guide to troubleshooting online for this error, but it did not help.  Can someone tell me please how to fix this?

  Finally, I got this figured out!  Here's what I did.

  Control Panel

  Display

  Parameters

  Advanced

  Intel(r) Graphics Media Accelerator Driver

  Graphics properties

  Display settings

  Expansion of the display

  Chosen at this stage full screen (no border) instead of "maintain proportions"

  As soon as I put this the error screen disappeared!  Can someone explain to me why this adjustment has been around?  I would like to know.

  Thank you all for your help.

• HP pavilion slimline s3110.uk, no vga input signal, monitor going to sleep, beeps

  Please help I don't know anything about the operation of computers, I went yesterday and the tower is a beeep then a beeeeeeeeeeeep on several occasions and anoyingly, there is also no screen on the monitor only a short display telling me there is no signal input vga monitor goes to sleep I tested the monitor with the turn of my brothers and it works very well, so now, I have no idea what if what to do next, as I can't reach the same splash screen I can't do some tests of material, there is only 24 hours and it kills me! I need internet back im lost without, plllllllllllllllleeeeease anyone have any ideas before go me crazy!

  Hi, what you want to do first is remove the (memory) ram sticks and put back them in. Re-allocation of places your RAM sticks can solve your problem. If you also have a video pci-express agp/pci/or card so you can re seat which as well.

  The RAM sticks are borads green circuit that chips on them in sizes of 3-inch 1 in. (approximately). They are kept in that they place in the motherboard by white tabs on both sides.

  Try these steps below after reading and see the diagram with the photos on page 7 to 9 from the link below.

  http://h10032.www1.HP.com/CTG/manual/c00877796.PDF

  (1) unplug the power cable from the back of the pc, unscrew the screws at the back of the large pc Tower and then remove the side panel (the side of the pc stands out).

  (2) then put the pc on the side, with the open side facing upwards so you can look down in and locate the locations of memory. Don't forget to look for the white tabs holding them places.

  (3) once find you them, they are usually 1, 2, or 4 sticks them to total, to make the next step to each stick, one at a time.

  First, push the white paws holding a stick of ram and the ram stick will pop out and you can pull it up towards you. Then everything just put back, push down (not too hard, careful not to damage it or the Board of Directors) and then the white tabs will click in each side. Make sure that you put the lever of ram you out in the same way, don't flit it that it will in a sense.

  (4) after that for all the RAM sticks, check inside the computer to make sure the cables are not loose and connected as they should be and then replace the side panel and the screw and turn on the pc and see what happens.

  Here is a guide on how to locate the RAM sticks. I hope this helps.

• my computer reads no detected hd0, then monitor goes to sleep on what I can do about it?

  When you turn on computer it comes up with the screen hp the past for the splash screen, then hd0 undetected readings and then the screen goes to sleep and a black screen lights up.

  What is the solution to this problem?

  Thank you...

  Hello

  Thanks for posting in the Microsoft Community.

  Please help us to answer some questions that would help us to diagnose the problem.

  1. What is the model of your computer?

  2. What is the operating system installed on your computer?

  3. What is the exact error message?

  4 have had any changes made to the computer before the show?

  This problem may occur if the hard drive is not properly connected or not get detected in the BIOS.

  Please follow the methods.

  Method 1:

  I suggest you to check the manual of your computer to boot into the BIOS and check if the drive is detected.

  NOTE: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Method 2:

  Follow the steps in the link.

  What to do if Windows does not start correctly

  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-screen-black-when-i-start-Windows-7 (Also applies to Windows Vista)

  Computer stops responding with a black screen when you start Windows XP

  http://support.Microsoft.com/kb/314503

  If you're still having problems, please do not hesitate to post we are here to help you.

• Monitor does not work, and the also.when of keyboard that I turn on my screen a message appears saying monitor going to sleep, then it goes into sleep mode.

  monitor going to sleep, cant access windows because I have several times to get this message.

  Connect the computer to another monitor. If the problem goes away, replace the original monitor. Make troubleshooting even for the keyboard. If the problems do not go away, you probably have malfunctions in hardware on the computer itself. You can fix yourself:

  http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot

  On tests of hardware failures often alleged swapping parts by parts checked. If you can not do the test yourself and/or are uncomfortable opening your computer, take the machine to a professional computer repair shop (not your local equivalent of BigComputerStore/GeekSquad). If possible, have all your data backed up before taking the machine into a shop.
  MS - MVP - Elephant Boy computers - don't panic!

• Pavilion P7-1254: monitor goes to sleep

  I leave my computer on 24/7.  After several minutes of non-use, the screen goes black and the power button on the monitor HP ha17 turns yellow.  Most of the time, I just have to move the mouse or press the enter keyboard key and the power button on the monitor turns blue and the screen lights up and asks for my sign-in.  On other occasions, after that the monitor went dark and the monitor power button is yellow, no matter how many times I hit Enter or move the mouse, the monitor not turns.  Sometimes, I get a message saying there is no signal and the monitor going to sleep.  I turned on the screen and off and turned the computer on and off several times, but it still does not light.  Then, when he decided to cooperate, the monitor will light up and work normally.  It has been produced for quite some time now (several months).  Any suggestions?  Also, is it possible to adjust the length of the no activity before the screen will Dim?  Thank you.

  Hello @mdh53,

  I read your post on how your monitor goes to sleep, and that you are not able to wake your computer from sleep mode back, and I'd be happy to help you in this case!

  To find the option to configure your options from the Hibernate mode and watch on your computer, I recommend that you restore the power management on your system to the default settings. This is possible by following the steps below:

  Step 1. Click the Start button
  Step 2. In the search box, type "Command Prompt"
  Step 3. Right click on command prompt

  Step 4. Click on run as administrator
  Step 5. At the command prompt, type powercfg /restoredefaultschemes and press enter

  reference: http://superuser.com/questions/669571/Windows-8-1-64-bit-power-schemes-gone

  In addition, I also suggest following the steps described in this document on hibernation (Windows 8) and troubleshooting of sleep issues. This will help you enable your system to wake mode standby successfully.

  In addition to the screen, I provided you with a few steps, you can try below:

  Step 1. Unplug the power cord at the back of the screen and the wall
  Step 2. Press and hold the power button for at least a minute
  Step 3. Plug the power cable in the monitor, and then to the wall outlet
  Step 4. Press the Menu button on the monitor
  Step 5. Navigate to the factory reset option and select
  Step 6. Try a different cable to connect your monitor to your computer

  If the steps above did not resolve your issue, you can try the monitor on a computer or other device to see if the problem persists. Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  Thanks for posting on the HP Forums. Have a great day!

• Microsoft Windows XP Media Center: monitor goes to sleep

  Having got my computer repair, where it was running with their instructor, I have connected my computer and when the Tower running and then turned on the monitor the monitor doesn't say _ no monitor input VGA signal go to sleep.  Then why she would work in the workshop of repair, but not at home? They put a new motherboard and it was running with their instructor, but not with my monitor? Please help me if you can! I use a HP 21.5 "widescreen LCD monitor product # FV585A

  Trish2016

  Hello;
  
  Let me welcome you on the HP forums!
  
  I read your post on monitor problems and wanted to help.

  Sorry, but without seeing your PC, it could be a number of different questions, which none can we diagnose or difficulty from here.

  For example, if your PC has a video card and integrated graphics card, the store could have decided to use the Jack that you do not use and that, to turn off the video YOU use.

  If the store is less traveled, and it was my PC, I'd take both PC and my monitor at the store, explain the problem and have them connect your screen while you're there.

  You deserve to have a working PC - you paid so that it can be fixed!
  
  Good luck
  
  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!
  
  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• Monitor goes to sleep during playback of a dvd in wmc

  I browse my residential wireless to my server in the Solution Explorer. I mount a disk image file video dvd (iso, I'm 1507 of them) in the remote location on a virtual drive.

  I installed an external software 'The Maxifier'. I go to the icon and choose the start page, WMC opens on the second display (projector). This process prevents it being trapped on the second screen of my mouse. Select (with mouse) movies/dvd and everythings great.

  Unfortunately displays to sleep while the movie is playing (prevents other dvd playback software it) Screensaver is set to 'none' If food options (when to turn off the monitor) is set to 10 minutes they will sleep in 10 min. If the value 2 hrs. they leave in 2 hours. I can move the mouse or press a keyboard, and they wake up back. Everything works normally except the software MCE preventing sleep monitor during playback. cannot find any setting to solve this problem.

  The problem is the remote computer is in my room, Planner normally wakes up the computer in the middle of the night, doing what he has to do, then fall back to sleep. (must be the internal code that the interview wakes the computer no display signal is sent unless there is user imput - oh well) Once the Scheduler wakes the computer it's not going to go back to sleep until the time of power options is obtained without user imput. (another pain in the neck) The sleep time can be lower timer monitor. If I set the monitor to 3 hours (longer than the movie), while I don't have the move disrupton, then when the movie ended I have to remember to put in a shorter time, or what I've done is completely close the box every night and leave the timer at 3 hours.

  Simplify the problems

  1 MCE does not monitor to fall asleep during DVD playback.

  2 when the Scheduler wakes the computer from sleep mode and finishes his tasks he does not put the rear computer to sleep.

  Remember that the monitor and the computer will go to sleep under the power options are set to, not a pilot or external software issue preventing sleep.

  Hello

  Try to create a new power plan:

  http://Windows.Microsoft.com/en-us/Windows7/change-create-or-delete-a-power-plan-scheme

  http://Windows.Microsoft.com/en-us/Windows7/power-plans-frequently-asked-questions

• HP S2031 monitor going to sleep

  When I'm playing games (World of Tanks), or try to run a simulator (space shuttle, train, etc.), the screen goes black, "monitor going to sleep" message and the monitor turns off. What is a monitor or a PC problem? The screen stays on all the time if I just browse the web. Thank you.

  I found my ptoblem. It was not at all, but the PC monitor. I removed the ther side of the PC and saw that there was a wire that was loose and fell on the videp card fan. The fan may not turn, so the card to warm up and stop sending the signal to the screen.

• Monitor goes into Sleep Mode immediately after the connection to the motherboard

  Hi all

  My problem is like this.

  I have a desktop crt monitor. When I give power to it without plugging it into the motherboard, it's showing a message 'no signal' all the time and never goes to sleep mode.

  But when I connect it to the motherboard, the monitor goes into sleep mode immediately. When I delete the connection of motherboard once again, it's back mode 'sleep' and saying 'no signal 'again.

  Any other monitor works well with this office properly.

  This same thing happens when I am trying to connect this monitor to my laptop as an external display device.

  What could be the problem?

  Kind regards

  James

  Hi Ty,.

  I suggest that you check the manual of the monitor to check the frequency of the monitor support.

  It seems that the monitor is defective because the other monitor works fine.

• Monitor goes into sleep mode during the installation of Windows 7

  Hello, I'm doing a new install of Windows 7 pro on a new SSD. He gets regarding to reset for the second time during the installation, and just before showing the page where you name the computer and configure user accounts, the monitor goes to sleep and won't return. only way to recover is to reset the machine, only to do exactly the same thing again. Anyone know what could be the cause? I used the same disk of windows for many expenses format / install Windows after hardware upgrades in the past and this has never happened before. Can provide the complete specifications of the system if necessary. Help, please!

  Hi Danpedro,

  I see that the screen goes into sleep mode, in the last step of installing Windows 7. I'll help you with this problem.

  1. What is the brand and model of the computer?

  2. you have an external display driver card attached to the motherboard?

  3. you format the hard disk during Windows 7 installation?

  Method 1.

  Disconnect any external devices and restart the computer to see if it helps complete the installation of Windows 7.

  Method 2.

  If you have a driver to attached external display card, then you can disable this external driver in the BIOS and check if that helps complete the installation of Windows 7.

  Warning of the BIOS:

  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Let us know if you need assistance with any windows problem. We will be happy to help you.

• When my monitor goes to sleep I can't wake him up by clicking on the mouse. I have to restart the computer to see the monitor

  When my monitor goes to sleep I can't wake him up by clicking on the mouse. I have to restart the computer to be able to see the screen.  I tried all turned on and on the screen but when I do it says monitor going to sleep

  I assume you are using a desktop computer you are referring to the monitor going to sleep rather than the course of PC to sleep.

  1 check the monitor power management & the display adapter in Control Panel, Manager of peripheral and during that control you the mouse power management and make sure that it is likely to be used for anything wake up.

  2 in case of failure, then check the monitor & display settings of the adapter to control panel, display.

  3 check manual site or the monitor stand, so the settings recommended.

  4 then check the settings of the Control Panel, power options, change plan settings change advanced power settings.  In particular, if it is a USB mouse, you may disable settings settings USB, USB selective suspend setting.