Monitor screen is stretched horizontally and become Concave past look at a capacity

Similar Questions

• How we split the screen for different horizontal and vertical divisions

  Hello
  
  How we split the screen for different horizontal and vertical divisions. I can't use panelSplitter because I need fixed screen and not the division which is movable/sliding. I tried inlineframe, but which fails because you cannot use forms, other trees components... :(
  
  so I would like to know how to do division without panelSplitter.
  
  Thanks in advance,
  Jyothi

  Hi Jyothi,

  If you set the panelSplitter attribute disabled to true, the delimiter becomes permanent/mobile no.

  Kind regards
  Amélie Chan

• My screen is stretched horizontally...

  Hello!

  My screen is stretched horizintaly... I tried to change the pixels, but it will then get more wide.

  Can I do to solve this problem?

  Please help me soon! I'm in the middle of my exams and I need my computer to look ok...

  Hello

  Horizontal control of your screen is turned off or you are using a screen on a standard monitor resolution.

  Using the controls of the monitor on the screen itself, try to reduce the horizontal display, so that it fits on the screen.

  If it's not her, then go to the settings/display/personalization in the control panel and adjust the slider to resolution one that best fits your screen.

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• How to change the display of the screen being stretched, blurred and the police is too big

  my screen went all tense and blurry, and the police is greater. I had connected it to a TV. I experminted with the resolution settings, but they have not made a difference, what do I do now?

  Hello

  2 things you can try:

  1.

  try a restore of the system before this happened

  http://www.windowsvistauserguide.com/system_restore.htm

  If necessary do in safe mode

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  2.

  try to get your site in manufacturere graphics or computer cards and find the driver download section

  Search your computer or graphics card model number based on what you have and download and install the latest graphics drivers for vista

  THEN try to make the screen of solution of problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-screen-resolution

  Change the screen resolution

  Screen resolution refers to the clarity of the text and images on your screen. At higher resolutions, items appear sharper. They appear also smaller, so more items adapted to the screen. At lower resolutions, fewer items adapted to the screen, but they are larger and easier to see. At very low resolutions, however, images may have serrated edges.

  For example, 640 × 480 is a lower screen resolution, and 1600 × 1200 is higher. CRT monitors generally display a resolution of 800 × 600 or 1024 × 768. LCD monitors can better support the higher resolutions. If you can increase your screen resolution depends on the size and capability of your monitor and the type of video card you have.

• When I try to go on "fullscreen" while watching the screen tube u develops and becomes empty. The sound still works. I have Firefox. Can someone help plse?

  I can't watch any of the programs in U tube on change too many full-screen. yesterday everything was ok. I tried a restore of the system without result.

  Hello

  · Is the behavior even with Internet explore?

  If Yes, then you can follow the procedure:

  a. Click Start, click Run, type desk.cpl and then click OK.

  b. click on the settings tab and then click Advanced.

  c. on the performance tab or on the Troubleshooting tab, move the hardware acceleration all the way to the right (Full position).

  d. click OK and then click Close.

  e. If you are prompted to restart your computer, click Yes.

  If the problem is only with Firefox, you can post your request in the support forum of Mozilla for assistance: http://support.mozilla.com/en-US/questions

• The screen appears stretched horizontally.

  How can I fix it?

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  http://Windows.Microsoft.com/en-AU/Windows-Vista/change-screen-resolution

  Change the screen resolution

  Screen resolution refers to the clarity of the text and images on your screen. At higher resolutions, items appear sharper. They appear also smaller, so more items adapted to the screen. At lower resolutions, fewer items adapted to the screen, but they are larger and easier to see. At very low resolutions, however, images may have serrated edges.

  See you soon.

  Mick Murphy - Microsoft partner

• objects and text on the screen appear to be "stretched" horizontally.

  all objects and images on the screen seem to be "stretched" horizontally with all applications and web sites.  A good example is a picture of someone... the normal image is large and thin person... on my screen, they appear to be shorter and wider... lol

  find manual for my screen... it is AOC model 2219V1.  As I have explained, I tried to change the resolution.  When I change the resolution on my side of the computer, then my husbands is affected.   There is something that I realized that I can't re-create or find...  You have any other suggestions... Thanks for your help.   What would happen if I reload windows software... do you think all the settings back to the original settings?  If I reload windows, will I lose the documents and files on my computer?

  I do not see where you said you tried to change the resolution.  You have changed the DPI, but it's different than to change the resolution (although can be connected to ALSO change the resolution.)

  The resolution is not independent - that is when you change the resolution of the screen of the user, it is on this size for all users of the computer.  Your original problem was:

  all objects and images on the screen seem to be "stretched" horizontally with all applications and web sites.  A good example is a picture of someone... the normal image is large and thin person... on my screen, they appear to be shorter and wider... lol

  This means that you are using a large non-ecran on a screen resolution and screen is allowing it to fill the entire screen.

  You say you have the AOC 2219V1 monitor)<-- linked="" to="" there)="" and="" according="" to="" the="" specifications="" on="" that="" web="" page,="" the="" resolution="" you="" want="" to="" set="" the="" monitor="" at="" is:="" 1680="" x="" 1050="" @="">

  So, in your case, if you have the correct driver for your video card installed * and * says video card supports widescreen resolutions (what is a new monitor?) then you should...

  1.	Open display in Control Panel.
  2.	On the tab settings in the screen resolution, drag the slider to the right until it shows the parameters of selection to 1680 x 1050, and then click apply.
  3.	When you are prompted to apply the settings, click OK. Your screen becomes black for a moment.
  4.	Once your screen resolution changes, you have 15 seconds to confirm the change. Click Yes to confirm the change. Click No or do nothing to return to your previous configuration.

  Now - if you do not have the choice of 1680 x 1050, it is a new monitor and you have the latest driver for your video - card, then probably your video card was not made to support screen widescreen resolutions.

• screen text - seems to be stretched horizontally

  My screen text seems to have stretched horizontally... dunno what I did

  Hello

  · What is the operating system installed on the computer?

  · Were there any changes made on the computer before the show?

  Try the methods below:

  Method 1:

  Check the settings of the screen using the buttons on the monitor.

  Method 2:

  Check the resolution of the screen, you can see the link below for the procedure: change your screen resolution: http://windows.microsoft.com/en-AU/windows7/Change-your-screen-resolution

• My Windows XP start up of page and all applications (such as my e-mail address) are stretched horizontally

  My Windows XP start up of page and all applications (such as my e-mail address) are stretched horizontally.  I tried to go into the properties of my Start Page tab and ' reset '.  After the computer restarts, no changes took place.  What should I do?

  Hi Donald,.

  You can try the following steps and check if it helps.

  a. right click on the taskbar and make sure it is not locked
  b it is locked, unlock it by selecting ' lock the taskbar"(it should be disabled).
  c.When it is unlocked, a click and everything always it just drag your mouse to the bottom of your screen

  You can read the following article and check:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/win_tray_taskbar_lock_howto.mspx?mfr=true

  You can also read the following article and check.

  How to move the taskbar from its default position Windows or put it back to its default position

• How can I get two jobs when using two monitors, instead of stretching a desktop on both screens?

  Hello!

  How can I get two jobs when using two monitors, instead of stretching a desktop on both screens? I n ' want to clone my office, and I don't want to stretch it. I want two desktop computers, where I can "send/give" to the other desktop programs.

  I need a third party program? It is very good. If you know one please tell me about it.

  Hi OskarKvist,

  This feature is not supported by Windows XP.

  However, you can use your favorite search engine to download any third-party software that could serve the purpose.

  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Hope the helps of information.

• After that start monitor/screen becomes black with visible vertical lines

  After that start monitor/screen becomes black with visible vertical lines. Move the mouse shows an activity going on behind the disorder. My son says video card?

  Hi Melissa,

  ·         Since when are you facing this problem?

  ·         Have you checked the issue by connecting a different monitor?

  Step 1: It seems to be a hardware issue to me. Check if the cables are well connected.

  Step 2: Connect another monitor to the computer and see if the problem persists.

• Monitor screen Direction - change from vertical to horizontal

  original title: monitor screen Direction

  How can I change the screen from vertical to horizontal?

  Hi Aspen77,

  Welcome to Microsoft Vista answers Forum.

  Let us know the operating system and the video card installed on your computer.

  However, you can try to resolve the problem by following the steps below.

  -Simultaneously press the keys on your keyboard to change the desired setting.
  CTRL + ALT + UP > Normal mode
  CTRL + ALT + RIGHT > turn 270
  CTRL + ALT + LEFT > rotate 90
  CTRL + ALT + DOWN > turn 180

  -Right click on my computer > manage > Device Manager > expand the display adapter option > right click on the map to display > click on uninstall > restart the computer if you are prompted to, or click on hardware changes. It would load the default settings of your display card.

  -Check the advance of your display card properties make sure buttons that allows you to rotate the screen are set by default.

  I hope this information helps.

  Thank you
  Anthony
  Microsoft technical support
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I just had a new hard drive installed (with XP), and no matter where I set the resolution, everything seems to be stretched horizontally

  I just had a new hard drive installed with XP, and no matter what I set the resolution to, everything now looks stretched horizontally.  I don't have this problem with the old hard drive containing XP

  If you did a clean installation of XP, then you must install the hardware drivers for your components. Go to the website of the manufacturer of your PC, then download and install the latest Windows XP drivers for your model.

  SC Tom

• Why desktop screen display upwards on the left side of the monitor screen and white is on the right; Properties show nomal.

  Why desktop screen display upwards on the left side of the monitor screen and white is on the right?  When I do my office they show nomal properties.  Everything seems to be normal.  Thank you

  Hi Sdaugherty3,

  Follow the methods below:

  Method 1: Try to change the resolution of the screen and check the results.

   

  To change your screen resolution

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/display_change_screen_resolution.mspx?mfr=true

  Method 2: If the method above is not enough, you can see the article in the Microsoft Knowledge Base and check.

   

  Resources for troubleshooting problems in Windows XP

  http://support.Microsoft.com/kb/307960

  I hope this helps.

• How can I fix the screen because everything is horizontal and not vertical poster?

  How can I fix the screen because everything is horizontal and not vertical poster?

  Hello

  Please tr

  1. Press and hold Ctrl + Al bot
  2. Press the enemy (left or right because I do not know what sense on your screen)

  Hope this helps