Monitor won't turn on after power off

Similar Questions

• U2415, artifacts monitor after power off for a period of time. Solved by allowing the DP1.2

  U2415 - artifacts monitor after power off for a period of time

  I'm running Win 8 Pro 64 bit, Asus GTX 760. Connected to the U2415 using the miniDP to DP cable.

  It is: after turning off my monitor for a period of time (PC fixed IT), 2 hours or more, after turning it back on, I see lines on the screen.

  I will need to restart the PC for it to be back to normal.

  It will not happen if I turned OFF the monitor for a short period. Only when I turned OFF for a few hours.

  Any ideas? Thank you.

  I downloaded a video on Dropbox. I had it turned on after turning off for about 3 hours.

  [See:www.dropbox.com/.../U2415.mp4]

  Hi Chris, just an update.

  A local forumer had discovered how to solve.

  It was the scene of DP1.2. By default, it is set to "Disable". After that I put to 'Activate' and test it for 2 days, everything seems fine now.

  Hopefully someone will find this useful.

  Thanks Chris.

• USB ports suddenly freeze and stops working for 10 sec after power off or powered speakers

  Original title: Usb Ports stop working for 10secs after power off or powered speakers!

  Hello

  I have no why, but my usb ports suddenly hangs for 10secs when my speakers turned on or off the power in case of operation of pc... And I have a usb mouse usb wireless keyboard and... with this problem that I can not work properly... and some times my mouse work in early upward and then I should use my keyboard to restart the pc... Then it works very well! Help me please. !

  Hi Thierry,.

  This issue does not appear with Windows that even after you perform a clean installation. So for me, it looks like a material damage. I would recommenmd get you in touch with the manufacturer of your computer and to do the repair.

  Do not hesitate to contact if you have problems with Windows in the future.

• Won't turn on after "relocation" on same HD Win7.

  Won't turn on after "relocation" on same HD Win7.

  Same HD (with existing work WIN7) has been used in new construction after that old MB crapped out. It wouldn't boot, so I re-installed Win7.
  It was the 2nd PC on a PC 3 family pack update version.
  The last time that I had a problem with the activation I actually had a phone number to talk to a real person, but now I keep running into dead ends... help! (25 days)

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

  Direct activation number: (888) 725-1047

  1-800-936-5700

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

• UEFI auto turn on after power failure

  I bought a desktop computer HP Pavillion PC500-225es (have a holiday home in Spain where the suffix are).

  It is running Windows 8.1 equipped a UEFI BIOS.

  I want the PC automatically restarts when power is restored after a power failure, but I don't see any option to do this in the UEFI BIOS. Is it normal for a UEFI BIOS? I have had many computers with a BIOS for old style and that I can remember all had the ability to set the auto restart after power fail.

  I don't know how a UEFI BIOS integrates with Windows 8.1 but I see no option for this in point 8.1 of Windows either.

  Someone at - it ideas?

  In addition, because the PC was bought in Spain, the BIOS is in Spanish. It seems not be anyway to change that in English, my native language. Not a big problem I can get in Spanish and may apply to the Google translate if I have to, but it would be easier if there was an option to switch to English.

  I ran the HP Support Assistant, and everything is up-to-date, there is no update to download BIOS.

  I guess I'm just stuck with the situation unless HP come with an update of the BIOS to add installation.

  Please see the BIOS for the motherboard Jasmine settings the settings you are looking for. Although this document is intended for the 'Jasmine' motherboard and your computer uses the "JasmineR', the settings should be similar if not the same thing.

  To access the BIOS Setup page... "Turn on the computer and immediately press the F10 key repeatedly, once per second, until the opening of the Computer Configuration utility."

  The following options are found in the Power Options:

  Messages POST (Power On Self Test)	Turn on or off
  After the loss of power	Previous state, or disable
  POSITION of delay (in seconds)	Zero, 5, 10, 15, 20 or 60 seconds

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• iPhone 6s won't turn on after update 10.0.2

  So my girlfriend has updated his iphone 6 s to the new 10.0.2 and since then it turns off on it. But now it is off and won't turn back on. I tried hold the home and lock buttons, and nothing happened. Everyone knows about this problem? and if so, how do solve you this problem?

  Try the troubleshooting steps in this document support. If your iPhone, iPad or iPod touch won't turn on - Apple Support

  Give the unit a chance to load first for a period of time.

• iPod 5th generation won't turn on after falling in the bathroom and then dry with rice! What should I do?

  Hello

  My iPod touch 5th generation won't turn after being immersed in water bath for about 15 seconds and then dried to rice. I tried pressing both the House and the buttons but nothing happens! My iPod is about a year and a half and it usually works very well.

  It really scares me because it's the only small portable device I have, which means that if I lose, I'm stuck carrying my iPad autour, which is quite heavy. Also, I wrote something about the iPod that I really like, but I didn't sync it to my computer, as I was traveling while I wrote it and then also when the machine broke.

  This is an urgent matter, because I travel by plane in twelve days and there's a pretty long flight. I want it fixed right here - what can I do?

  Thank you

  Stella

  Hello moxie.star,

  Thanks for this info and choosing the communities Support from Apple. I know how important to get your iPod working again is for you! Based on what you said, it seems you can be affected by a hardware problem and get your iPod repaired by a technician to repair Apple. Please click on this link to find the best option for your situation:

  the Service response to iPod

  See you soon!

• Linksys SGE2010P resets after power off the power

  Hello

  I have a linksys SGE2010P and when I configure and save works well, but after a power off the settings are default return. someone an idea?

  Rensk,

  I used to have the same problem in my SFE2000 until I learned that you do the following steps to permanently save your settings

  go to Admin > file management > copy files

  Click the copy settings button

  set the name of the Source as Config file running

  Set the name of Destination as Config Startup file

  Click on apply

• Laptop won't turn on after the new battery.

  A few days ago, when I got home, I found that my VAIO VPCF1290x of 3 years was dead. The battery indicator has been telling me to get a new battery, but I thought it would be enough for now.

  Problem: Laptop wouldn't turn on after pressing the power button.

  (1) with the adapter and the battery still in my laptop, by pressing the power button does not turn on my laptop. However when I press the power button, green light battery (the button itself) indicator on for about a second, then dimmed quickly.

  (2) after reading some forums, I decided to fill my laptop into the battery button for a good 30 seconds trying to turn slot WITH the adapter. It turned on my laptop, but it took a good 2-3 seconds for the laptop to make all sounds as if it was about to start.

  I have since then bought a new battery and a reason that my laptop lights at all. When I connected my new battery to condition it green button energy came on again for about one second then disappeared.

  I don't know what's the matter with my computer and would like to help. I KNOW that I should probably get repaired but would like an idea as to why my laptop behaves like a *.

  EDIT *.

  To give more information, when I have the OLD battery placed in the computer of the battery indicator is a constant flashing orange.

  With the NEW battery sony return the same thing occurs when the battery light constantly blinks orange.

  
  

• PC won't turn on after that heating is triggered off the coast

  I knew better than that, but was cold and could not get any other energy sources in the room.

  Connected to my HP Pavilion all-in-One (Windows 7), include I - couple additional HDs, 2 printers (because my wireless HP printer jam printer again and made a clicking noise when you send something to print, but it won't pull the paper but I will post only under printers), USB hub and speakers and the Sub.

  Switching on of all this is two small regular bands and a 450va Fellows Battery Back Up Power, that power more fellows to strip something happened and the Stoppers on the work on one side. : (

  Last night it was cold so I went and got a little radiator and not be able to access another electric taken in the room, I plugged it in one of the smaller bands that had the outputs more available. The Unit carried out an hour or two and everything seemed fine.

  When I got up to walk out of the room, I fell a little more of the heater and it farm and therefore part of the office, but I can see a printer is turned on. I just checked the heating on another outlet and it works fine.

  I checked all power strips and smaller Exchange, one of the oldest with a little again, bit a wider power seems to come from all power strips. I know I need to check each of them with a little to make sure they really are producting power, just not a light on for some reason any.

  But the Bureau not power anything. I just read something where it says to unplug the PC and leave that he unplugged for a minute, then after a minute hold button power/start on the PC for 30 seconds, then plug the backend to see if it works. HE HAS NOTHING. I read, where he said it was supposed to take care of any problems with the 'crowbar' in the power circuit, and I don't even know if it is compared to my computer.

  I'll pay more with swapping power supplied and plug things on them, but other suggestions would be much APPRECIATED!

  ONLY connect the computer & monitor in one outlet. Bypass all these power cascading several bands. Then perform the tests appropriate to the device. Here's a general tutorial.

• iPhone 6 has ran out of battery juice, but won't turn on after connecting the power cable.

  Hello.

  I have an iPhone SIMless 6 (iOS v9.3.2) who missed the battery nothing to juice and turn off the power. I plugged the white USB power cable to a Windows laptop, but nothing happened. No power on, sounds, etc. I even tried another power cable and the source (power supply AC adapter and cable for the iPad). I don't even know if it is supported or not.

  Thank you in advance.

  If it is disabled on its own because of lack of power, it will take some time before he can return to the top.

  Plug it in and leave there for at least 10 to 15 minutes.

• Tecra A4 won't start no-switches power off after 3 seconds

  Hey all,.

  I really hope you can help me on this. I recently bought a step expensive laptop Toshiba Tecra A4 to Ebay. He said there is a disk failure hard only... it's not.

  When I try to turn on the laptop, the lights come on and the DVD player starts to turn... everything is normal. But then after about 3 seconds it stops before that it can reach the bootscreen - as I would remove the power cable.
  The very strange thing is that sometimes we'll tell every 1 15 try the laptop starts as it should be and start my Linux live CD. Then I can work for hours, and bad don't get passes nothing... until I want to turn it back on. Then the game starts from the beginning.

  I tried already to:

  -Remove the hard drive from default
  -remove the power cable
  -only remove the battery
  -replace the RAM or be one of the two
  -to remove the two RAM
  -remove the power cable and the battery during the night to reset the CMOS

  ... nothing has changed.

  I would be very happy if someone could help me. So far, I have found that the writings of forum without response to this problem in the WWW - if at least I'm not the only crazy :-)

  Thank you very much

  Hans

  > When I try to turn on the laptop, the lights come on and the DVD player starts to turn all normal. But then after about 3 seconds it stops before the splash screen, it can reach

  My friend had the similar problem, but a replacement RAM helped.
  In your case, it might be everything. (motherboard, etc.)

  The BIOS can be updated from windows OS since only based victory of BIOS is available for download The ASP (partner) would update the BIOS but to be honest, I doubt it s a BIOS related issue to me it sounds like a hardware problem

• My iPod stop now, it won't turn even after be plugged into the power supply for more than an hour

  IiPod touch than 64 GB itself now cut an hour plug into the current af it starts

  Press the sleep/wake and home buttons and keep them for at least 10 seconds.

  If this is not enough, take a look at these articles Support from Apple:

  If your iPhone, iPad or iPod touch does not respond or does not turn on - Apple Support

  Use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

  As a final step, try recovery mode. Turn off your unit, then plug it to your computer with the hold home button. Hold down Home button until you see the logo on the screen of your iPhone iTunes. After that on your computer, you should see the iTunes window saying that your iPhone needs to be restored to factory settings. Click Restore.

  More info here:https://support.apple.com/en-us/HT201263

  If these steps do not work, contact Apple and ask for help.

  https://www.Apple.com/support/iPhone/contact/

• Satellite L450D monitor wouldn't turn on after that laptop turned on all night.

  Hi guys,.

  Just a quick query... I just left my laptop computer on all night, the monitor is set to turn off the display after 5 minutes of inactivity. When I tried to go back on this morning the display will not turn back... I had to stop the pc with the power button.

  Is this a common problem? Is there a way I can avoid this in the future?

  Thank you very much.

  Hello

  Maybe you could avoid such symptoms may in the future by upgrading the graphics card and BIOS update driver.
  I read in the forum that some people had this similar problem but they show pilot help

  See you soon

• 5s iPhone won't turn on after hours of load

  Hello apple community, I hope someone can clarify this for me!

  My iphone 5s or 16 GB (iOS 9.3.1) is 18 months and worked perfectly up until 2 months ago when he would go dead and would not turn on unless I heat the back with a hair dryer.

  The first time, she was cut off, I kept it plugged in for more than 12 hours on a charge unanswered, then I discovered in a forum should I heat with a hair dryer. I did it and it worked, after a minute of heat, apple logo finally appeared. I did it in 3 different occasions where the battery went completely empty and it worked!

  However, the battery died again yesterday and I have heat in the back 3 times. On the 3rd time, iphone finally turned on but the battery level maintained at 1% and it does not reach the same load, while implementing the alarm, the phone has been cut off again and nothing happened since then (he was 18 hours without my phone). You think it's time to replace the battery? IS THERE anything I can do to make it work again, I promise that I won't it drained again! I just want to make sure that it is the battery because I will replace it myself, do not have enough money to take it for repair.

  It does not appear as if the battery can be wrong - you can take it into Apple - diagnosis is free - the price is for the repair - if at least you will know if your suspicions are correct or if there is another question

  Please take a genius appointment at an Apple Store, or select another authorized service provider.

  Also, as you know - if you open the phone - you cancel your rights to the service to Apple