Monitoring of the physical OS - Ruleset

Similar Questions

• Monitor the physical host computers

  How to control the physical hosts with vFoglight 6.6?

  The cartridge of the infrastructure offers you the ability to monitor the physical host computers

  http://eDOCS.quest.com/vFoglight/66/doc/wwhelp/wwhimpl/common/HTML/frameset.htm?href=cartridge/InfrastructureCartridge/index.php

  The process of creating agents and add hosts can be seen here

  http://eDOCS.quest.com/vFoglight/66/doc/cartridge/InfrastructureCartridge/UsingTheCartridge.02.3.php#416085

  Golan Shem-Tov

• W510 can not put primary monitor on the right

  I have a W510 in MiniDock Plus series 3. The operating system is Windows XP.

  I can activate my external monitor using the NVIDIA Control Panel. The page "Set Up several screens ' allows me to extend the desktop as 'A large horizontal Desktop' or 'configured independently.

  Using "Set apart" it is possible to choose either "laptop display + external" or "external + computer laptop display.» The screen that appears first is that logically on the left.

  Underneath, there is a distinct choice for the main screen of Windows.

  Because my office is configured with the laptop on the external monitor to the right and the left, I want to have ' laptop display + external ', with 'external' as main display.

  Among the four possibilities, it is one that does not. When I choose the laptop on the left and the external as primary, the laptop is always a priority.

  If I choose as the main external, can I have the phone as secondary, but it is logically to the right, but physically to the left. So to move a window to the left screen I have to drag it out of the right. I can not physically reconfigure my workspace to bring the laptop to the right of the external display.

  What Miss me?

  This seems to be a bug in the NVidia (3.3.452.15) Control Panel. It cannot apply the correct setting.

  The solution is to change the position of the monitor using the windows display settings tab properties drag the monitor icons so that the '2' monitor is on the left. Then it will be applied correctly, and the NVidia control panel will be able to read the configuration.

• Session of the monitor on the chennel Port in Dell P6448

  Hello

  I use Dell P6448 is my access switch with router on a stick architecture. There is a port-chennel between the dell switch and interfaces of the router LAN. Now my requirement is I want to sniff all traffic passes on this switch chennel port end and he mirrored to a free port. It is once I have set the source interface 1 moonitor session? It offers the possibility of physical interface only and port-chennel1 cannot be specified there. Secondly if we try the physical ports in the interface of the source of the session monitor command it gives an error that this port cannot be used as a source interface. I use 3.3.1.10 Image.

  Thanks for the help in advance.

  Ashok Dhaktode

  There is a limitation of the port mirroring. A port channel cannot be the source of a mirror, which includes physical ports in the port channel. You will find that if you get rid of the channel of the port of the individual ports will be able to mirror.

• All of the physical memory used, but nothing in the Task Manager

  Hi I have windows 7 64 bit new installation as of yesterday (fully updated) and encounter a performance problem. When I look under task manager 95% of my physical memory (4 GB 3.5 GB) is used, but there is no task that uses memory. I chose to see the task for all users, and again nothing use the 3.5 GB of memory. It is a pretty clean install (auditor of virus and Skype, installed steam just) so no chance of a virus. I check my page file and it is set for the page file windows automatically scabies.

  I tried many things:-all service stop I can (no change)
  manually configure the paging file (no change)
  Reinstalled windows 7 (problem is finally once that all updates have been applied)

  Any help is greatly appreciated.

  Thank you

  I had the same problem and it is solved.

  a month ago my computer was sluggish and his memory was 77% either 93%, even though nothing was running. in the Task Manager for all the different processes added up to about 1.75 GB, so there was about 2 GB memory unexplained (4gig memory). I always ignored the 'show processes from all users"because im the only user on my computer, but decided to finally click i and a new process comes top of the list. Windows Media Player Network Sharing Service, this process itself was using 2 GB of memory. After completing the process, my memory returned to normal. However another thing you need to do is go to the resource monitor in the performance of the Manager section tasks and to suspend all processes of Window Media Player Network Sharing Service which are still open to slow things, and then set your very pretty.

  I realize that this is maybe not the exact answer to problem for everyone, but give it a shot.

• Reg: Export data of the physical database system standby.

  Hi all

  We have a standard edition one 11 GR 1 material oracle environment, I need to export the data from the physical monitoring system.

  If anyone can suggest me, how to do it safely (up state).

  Kind regards

  Konda.

  Oracle Data Guard is available only as a feature of Oracle Database Enterprise Edition. It is not available with Oracle database Standard edition.

  Then you must export data only from primary or you use EXP instead of EXPDP on the standby database. Because EXPDP create a temporary table export process duration.

  Concerning

  Mr. Mahir Quluzade

• Second monitor to the left

  I have a dual monitor set in place (24 "19201200 with a 19" 12801024 on the left), and I can get my Vista VM to recognize and work properly with both monitors, however, if I set the host to have the second monitor to the right of the main screen.

  But physically, the second monitor is on the left side. Is it possible to get VMware workstation to allow my guest have the screen to the left? Whenever I put it manually upwards in this way, it doesn't work, I just get a box of resolution 800 * 640 on the main monitor in the upper left corner.

  Thank you

  According to the messages in the forum by VMware employees, this is a limitation of current.  You use multiple monitors with Workstation in a guest, the primary monitor is above left.

• How card ASM disk path to the physical drive on AIX?

  Hello world
  I work on a plug-in for Oracle Enterprise Manager 10 g 2 on AIX 5.3 which monitors storage bays and supports databases in addition to the "emrep" database ASM One of the metrics of this plug-in is populated by the result of a korn shell script. Directly, the script runs on the AIX host (connected to the storage array cable CF via HBA ports) and retrieves the mapping for - disk - logical disk - LUN - ASM.
  
  Now, I was able to get the mapping to physical disk - logical disk - LUN, but could not map drive ASM. I googled a lot for no idea, but did not find the answer to this specific problem.
  
  Now, I have the list of physical disks used for the DSO by the command:
  
  LSPV
  
  hdisk0 0001c22ac8d664ca rootvg active
  hdisk1 0001c22aa51f496a Oracle active
  hdisk2 0001c22ac478263a zero active
  hdisk3 0001c22ac472549a Oracle active
  hdisk4 0001c22ac4725d6a Oracle active
  hdisk5 none None
  hdisk6 none None
  hdisk7 none None
  hdisk8 none None
  hdisk9 none None
  hdisk10 none None
  hdisk11 none None
  hdisk12 none None
  hdisk13 none None
  hdisk14 none None
  hdisk15 none None
  hdisk16 none None
  
  Hdisk5-16 discs are ASM disks and there are currently of no PVID.
  
  I also have the list of ASM disks by the command:
  
  ls-l/dev | grep oracle
  
  CRW - rw - 1 oracle dba 22, 6 12 may 00:02 asm_rd10_1a
  CRW - rw - 1 oracle dba 22, 10 Apr 21 07:27 asm_rd10_1b
  CRW - rw - 1 oracle dba 22, 7 May 09 13:53 asm_rd10_1c
  CRW - rw - 1 oracle dba 22, 8 May 09 13:53 asm_rd5_1a
  CRW - rw - 1 oracle dba 22, 4 12 may 00:02 asm_rd5_1b
  CRW - rw - 1 oracle dba 22, 9 APR 21 07:28 asm_rd5_1c
  CRW - rw - 1 oracle dba 22, 12 12 may 00:02 asm_xbb2_rd10_1a
  CRW - rw - 1 oracle dba 22: 11 Apr 24 07:34 asm_xbb2_rd10_1b
  CRW - rw - 1 oracle dba 22, 13 May 09 13:53 asm_xbb2_rd10_1c
  CRW - rw - 1 oracle dba 22, 16 12 may 00:02 asm_xbb2_rd5_1a
  CRW - rw - 1 oracle dba 22, 14 Apr 24 07:34 asm_xbb2_rd5_1b
  CRW - rw - 1 oracle dba 22, 15 May 09 13:54 asm_xbb2_rd5_1c
  
  Now, I'm looking for a way to map these two lists with each other and had no luck so far.
  Oracle provides this information somewhere in the OEM installation structure or y at - it a command in AIX that could provide a way to map the ASM disks on the physical disks?
  
  Any help on this is greatly appreciated. Thanks in advance...
  
  
  FYI: ASMLib driver is not present on the system.

  I am not familiar with aix, but I think you can get the major and minor numbers as follows:

  ls-l/dev/asm_rd_10_1a
  CRW - rw - 1 oracle dba 22, 6 12 may 00:02 asm_rd10_1a
  ls-l/dev/hdisk5
  CRW - rw - 1 root root 22, 6 12 may 00:02 hdisk5

  the numbers would be 22 and 6.

  That's just a guess, on HP - UX, it's like that, but it will be a little tricky

• app purchase where the physical store is not present

  I am from Bangladesh and that you wish to purchase an app on the app store, but there is no shop in my country. is there an alternative way for app purchases where the physical store is not present

  TIA

  Mubaswir

  No, the only place to get iOS apps is on the app store (via iTunes on a computer or an App Store app on an iOS device) and you must be in a country to use its iTunes/App store (which is part of the terms of the store) - until if/when Apple open an iTunes store in Bangladesh (we are fellow users we do not know what might happen until Apple announce something) Unfortunately you will not be able to download any content from the iTunes store.

• How can I change the physical address associated with my Airport Extreme

  I moved, but when I look for devices by using find my iPhone devices connected to my Airport Extreme base station seem to be at my old location. How to upgrade the physical address associated with the Airport base station?

  To the best of my knowledge, there is no way for the user to do. Finally, the database of Apple will update. There is some anecdotal evidence of that having an iPhone connect to airport speeds the process.

• Can I set up a secondary monitor to the HD on my iMac mid 2011

  Can I set up a secondary monitor to the HD on my iMac mid-2011 with no problems. I cannot afford to upgrade to the new iMac 27-inch and wanted to update my monitor.

  Is this possible on the Mid 2011 iMac?

  Yes.

  Your best option is to choose a good monitor that has Display Port or DVI input and shy away from those who only have HDMI and VGA input.

  For a display Port monitor you will need a Mini Display Port to Display Port cable if it is not provided with the monitor.

  For a DVI monitor you will need to a Mini DisplayPort to DVI adapter and a DVI cable.

• Toshiba R100: External monitor as the primary display device

  Hello

  I would like very much to have my 17 "external monitor (1280 x 1024) selected as main display device, unfortunately, the option is grayed out in the display settings.

  Moreover, I want to run 1280 x 1024 on the built-in-monitor and the external monitor and then turn off the built in monitor, but it does not seem possible either; the resolution changes again in 1024 x 768, when I try to turn the desktop on the external monitor.

  I've updated the display driver.

  I hope someone can help.

  Niels Grau

  Hello

  AFAIK the Portege R100 has only 1024 * 768 under more resolution. It is therefore impossible to put the two monitors to 1280 * 1024. Sorry!

  Tried FN + F5 keys to change the output screen?

  Campino Bye

• Problems with external monitor and the Satellite U200 - 10 d

  I have a Satellite U200 - 10 d running Vista Business Edition. When I attach an external display screen flickers (horizontal lines on the screen)... It's worse when you move the mouse on the screen. The monitor on the laptop is fine I just have problems with the external display.

  The screen that I is a model VG1930WM viewsonic (widescreen) here is the specs of res for this screen...

  PC VGA up to 1440 x 900 non-interlaced
  Analog analog/digital RGB (75 Ohm, 0.7 Vc - c) / DVI - D

  Anyone have any ideas? I checked the graphics driver for vista and this is the latest version...

  HM, it's a nice solution, I have a friend with a similar problem.

  We will try your suggestion, snipe and perhaps give feedback if it worked for us.

  Welcome them

• How to get the physical credit iTunes gift card?

  How to get the physical gift card iTunes on your iTunes store account balance?

  • You cannot buy an iTunes gift with in-store credit.

  See the link below to buy physical gift cards for iTunes.

  http://www.Apple.com/shop/gift-cards

• Satellite Pro A660 - extended monitor on the left?

  I have some trouble getting the extended screen (2) to be positioned on the left side of my laptop A660:

  I have my new Toshiba (thanks to his monitor, call Lap1) set to the right of my big external flat screen (Ext2).

  In the nVidia control panel, I have the options like in the screenshot, that allows the Ext2 sit to the right of the Lap1, which means that my mouse goes to the Ext2 on the other side (the right side) of the monitor Lap1...

  Is there a way to get the Ext2 and Lap1 monitors (see screenshot: http://i53.tinypic.com/i39myd.jpg) to the position of the switch for my Lap1 is extended to the LEFT with Ext2?

  Any help much appreciated!

  HL

  Hello

  > Is there a way to get the Ext2 and Lap1 monitors the position of the switch so my Lap1 by Ext2 is extended to the LEFT

  To be honest, I don't know if it's possible to m.
  I n t have a laptop but the A660 and the external monitor is also connected to this laptop. I use the extended so desktop but eat t n for this scope on the left side.
  But I have an Intel graphics card. Even if the GPU driver has been updated, the Office may be extended to the right only.

  But I managed to make my external monitor as the MAIN monitor and the laptop as secondary display monitor.