Mono recording has 2 waveforms, 1 very low Amplitude

Screen Shot 2016-06-27 at 11.56.53 AM.pngScreen Shot 2016-06-27 at 12.12.48 PM.pngHello

I am changing a mono recording. However, I have 2 waveforms. It is almost flat and short along the mark dB infinity and the other from the voice that I have saved. The registration of a person speaking was made in a room untreated. The (gun) microphone was farther from their mouths that ideal. I guess the low amplitude waveform is probably echo chamber.

I was initially concerned about the implications on the Assembly. Now I think that given the very low amplitude of the waveform "2nd" (which will appear as a flat line unless I Zoom in so close I can see the sampling points) I can ignore and just edit to higher amplitude waveform.

I would like your comments on these thoughts please.

Thanks a lot for any assistance.

Bryce

Slacks247 wrote:

I am changing a mono recording. However, I have 2 waveforms. It is almost flat and short along the mark dB infinity and the other from the voice that I have saved. The registration of a person speaking was made in a room untreated. The (gun) microphone was farther from their mouths that ideal. I guess the low amplitude waveform is probably echo chamber.

Yes, as mentioned you are in multichannel mode. But, one microphone will produce only a single output, so at best this other waveform will only be noise. So, if you simply convert the channel with the real signal in a mono track (which is all you need), then the ambiguity apparent will disappear.

So, you cut the track with noise (click the L or R button until the track you want to cut gray goes), go to "save under" and change the type of the sample in Mono in the Panel that opens, give the new file a name appropriate and save it. Gives you another advantage - don't you change the original track more, so you'll always come back if you change your mind about what it is. And we see this as a good practice anyway!

Tags: Audition

Similar Questions

  • sound is very low

    His record game

    sound is very low

    Hi mubry_sa,

    ·         What version of the operating system is installed on the computer?

    ·         Did you do changes on the computer before the show?

    ·         You get the error message?

    Follow these methods.

    Method 1: Run the audio troubleshooter.

    Open the troubleshooting of Audio playback

    http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-Troubleshooter

    Method 2: Search the hardware changes. Follow these steps:

    (a) click Start, type Manager of devices in the search box of start and press ENTER.

    (b) right click on sound, video and game controllers, and then click search the hardware changes.

    Method 3: Follow these steps:

    Step 1: Check the status of the speakers and headphones in the playback devices. If it is disabled, enable it. Follow these steps:

    (a) right click on the volume icon in the system tray at the right corner on the desktop.

    (b) select the playback device and activate the speakers and the headphones if it is disabled.

    Step 2: Set speakers as default device and check.

    (a) right click on the volume icon in the system tray at the right corner on the desktop.

    (b) select playback devices, right-click and set as default device speakers.

    Method 4: Follow the steps in the article.

    No sound in Windows

    http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

    For reference:

    Tips for solving common audio problems

    http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

    Sound cards: frequently asked questions

    http://Windows.Microsoft.com/en-us/Windows7/sound-cards-frequently-asked-questions

  • The volume of the recorded sound is very low when played. I tried to solve the problems through Control Panel of configuration-sound options and increased the volume to 100 form my mic too. All the other volume options, it's 100 too. It has no effect. Hel

    The volume of the recorded sound is very low when played. I tried to solve the problems through Control Panel of configuration-sound options and increased the volume to 100 form my mic too. All the other volume options, it's 100 too. It has no effect. Help needed ASAP

    Hello

    Control Panel - SOUNDS - Audio peripheral devices configuration-manager

    Make sure you write down the description and model double click top - tab drivers - write version. Now
    Click on update drivers who cannot do anything like MS is far behind the certification of drivers. Then RIGHT
    CLICK above and UNINSTALL - REBOOT - this will rebuild the driver stack.

    If your driver shows 06 you have the default windows and part of the question.

    Go to the system manufacturer's website and get the latest Audio/Sound drivers - download - SAVE - go to the place where you
    Put them - right click on Reboot - RUN AS ADMIN -.

    Check the Version on the tab of the driver in the device as a sound Manager often restoring drivers, then install
    the current version. Restart and check after each try, not uncommon to have to run the pilot of 1 to 4 times or more.
    Just make sure that the version you have installed appears in the tab of the driver.

    Then navigate to the site of the manufacturer of the device and search for the drivers more recent and repeat the installation procedure.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    ---------------------------------------------------------

    After the updated driver.

    Click with the right button on the speaker near clock - recorders - right click in the box - check show disconnected devices
    and show disabled devices - check your micro - highlight them, then lower right properties. Do
    of course the appropriate injector is enabled and check that other settings - on the levels tab make sure MUTE is not checked
    and APPLY / OK changes.

    Also in the search for some Audio Manager Panel (perhaps named after the manufacturer of the sound driver). Mine
    is the RealTek Audio Manager, yours can be quite different name if you have one.

    How to activate Audio devices hidden in Vista
    http://www.Vistax64.com/tutorials/143447-audio-device-enable-hidden-devices.html

    Connect one microphone, music player or other audio device to your computer
    http://windowshelp.Microsoft.com/Windows/en-us/help/b0e3d7fb-1b4a-4926-8254-65da289209261033.mspx

    Problems with sound and audio or no sound - a Mr Fixit
    http://support.Microsoft.com/GP/NO_SOUND

    I hope this helps.

    Rob - bicycle - Mark Twain said it is good.

  • Tecra A3 has very low volume

    Hi all, I bought a used Tecra A3. With Win XP Professional, service pack 3. I have not all records with him.
    It was working well before a week or two ago. It has very low volume, I have all levels of volume and the maximum wave. The manual volume knob on the front has no effect, it used to work
    I think the problem started when I downloaded youtube FLV files, then I downloaded a program ('super' was the name of the program) to convert the FLV files into AVI files.
    I uninstalled the program of conversion, I failed to convert anything. I've uninstalled and reinstalled the driver of sound card - card his Realtech AC97. I uninstalled and reinstalled WMP11. None of this has helped.

    On this view, I saw how to do a system restore. I thought to perform the system recovery can solve the problem.
    My question is, if I perform the system recovery, to the GET to the elimination of the parameters of the box, it will clear the WIN XP operating system?

    Thanks for any assistance received, Darren.

    Hello Darren

    Please do not be angry on me, but make you it so complicated. Let's be clear on this:

    Saved on DVD of recovery recovery image contains the operating system, all necessary drivers, Toshiba tools and utilities and some additional applications such as a DVD player. So if you want to install the OS by using Toshiba recovery media will be deleted all content saved on the HDD, formatted partitions and lately OS will be installed. When all is finished you will have clean operating system preinstalled. It will be the same State as the first day after the default purchase.

    Then I don't understand what you mean now with the restore process. During the installation of recovery is complete you must not install or configure anything. Just boot OS, install your favorite software, install the Microsoft updates and be happy.

    If you have any other questions please post again, but please if you ask something to be clear and precise.

  • HP Pavilion g6-1d98dx has very low volume.

    Hello

    I have a

    HP Pavilion 1d98dx g6 with W7 Ultimate that suddenly has very low volume. I tried rolling back the drivers, uninstall them and the device itself.

    I also tried this option of Equalization of sound level, but it only makes it worse. He used to sound very good, but now it's horrible. Now, I have to wear headphones to listen to the music! Any help would be greatly appreciated. Thank you!

    Hi @Kindakool

    I understand that you are having problems with the sound of your built-in speakers. I'm happy to help you with this.

    You can start with the following page, even if you get sound.
    No sound from speakers (Windows 7)

    Or you can check on your inside connections are involved for this you will need:

    HP Pavilion G6 Notebook PC - Maintenance and Service Guide

    Microsoft support Web site:
    Diagnose and solve the problems of Windows audio playback automatically

    If those who do not work it is possible that there is a physical problem with the speakers themselves. At this point, I would call in to our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number.
    http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  • The recorded sound volume is very low

    the recorded sound volume is very low... previous, it was good... Suddenly don't know why, he fell it please help

    the recorded sound volume is very low... previous, it was good... Suddenly don't know why, he fell it please help

    I tried to verify that levels under manage audio devcies... even all checked... but still not found a solution to this... Please help with several steps... I'll try each... Thank you

    Hi navnyu,

    (a) what software do you use to record audio? Using Sound Recorder in Windows Vista or any other third-party application?

    (b) what device you use to record audio? Micro analog video camera, CD player and DVD player

    You can check the volume settings on the device itself for the volume levels.

    Also check the settings of volume (if available) in the recording software

    Run the FIXIT available in the link below and check if that helps

    Tips for solving common audio problems
    http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

    Troubleshoot audio recording

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-audio-recording-problems

    Thank you, and in what concerns:

    Ajay K

    Microsoft Answers Support Engineer

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Hello! I do a menu print of tarp for a round table, I did this from ms word since I have no idea where can we make a semicircle menu upside. My problem is that it has a very low resolution, please help me how to print possibly with 3' table

    Hello! I do a menu print of tarp for a round table, I did this from ms word since I have no idea where can we make a semicircle menu upside. My problem is that it has a very low resolution, please help me how to print possibly with 3' round table. Thank you

    Oh dear.  It turned into a terrible mess of a thread with opinions and advice.    You do your layout with Word.  In my experience, Word is a nightmare when it comes to positioning many areas of text and images.

    You shouldn't have changed the Word document in a JPG file, because the text all which perfectly progressive, which would be printed to "all" size without loss of image quality, then became an image file.  But if you "had" to make it a JPG, just about the worst possible way to do this is with the Snipping Tool, because the resulting image would have only the resolution of your computer screen.  Dows following?

    How big are the pictures you used in Word?  They probably didn't need to be very large, because each image is only an impression at a relatively small size.

    First thing to try is to open the Word Document and save in PDF format using the Standard option (after you select Save as PDF

    It will keep the text in the form of scalable vector objects which allows printing at any size.  However, I don't have the knowledge of how Word uses images.  I just did a little test, and while I could zoom in to see in the text, I'm not sure that the same is true of the images.  Depends on word refers to the image of the player, or he brings as an object of frame size, and I suspect it's the latter.  You need to do some research on it, because it might make you save a lot of time.

    You have Publisher?  Editor certainly reference the drive images, and friezer downsize to fit the page.  I suspect that you can import a Word into Publisher document, which would put you best part of the way with it.  I would like to test it, but I use it as a loyal user of Adobe InDesign.   If you are forced to restart, then editor or InDesign would be lot better, but it's doable with Photohop.  Just make sure that you start with enough pixels, which means 36 inches at 300 dpi or 10 000 square pixels.  When did save as PDF using the preset high quality printing, and ask your color printer (probably just use sRGB)

    Good luck

  • HP ENVY 17 Notebook PC TS: very low volume after upgrading to 64-bit windows 10, beats box has been deleted.

    My sound is very low and poor quality after the upgrade to windows 10, I've updated all my drivers, I chose the highest quality in the properties of the hd intel audio drivers, I checked the 3 volumes.  I should of never being updated... BIG MISTAKE!

    Thank you for your advice, sorry I did not take the solution to my problem was very simple, I had to wait for HP put the new update!  Following the solution, I went to HP Support Assistant, the trick here was to goto Support Section and not up to date on my Device option. In the Support section, I clicked on my camera since I went to the Support Center HP technology - software and drivers, then I clicked on check now. and Wallah all the drivers I need to solve my problems...

  • HP Officejet Pro 8500 best has come out very low but the printer works fine.

    I was always able to make great copies.  The quality of the document that I copy is excellent and I've copied before.  Now everything I copy is very low and cannot be read.  The printer works without any problem.

    Hey 1265yankee,

    I see that you have a problem of quality of the copy with your Officejet Pro 8500 (A910) a model-all-in-one.  Have you tried to reset the printer hard and ensured that the device is connected to a wall outlet directly?

    • Unplug the printer while on
    • Unplug the other end of the power cord from the wall jack directly
    • Wait 30 to 60 seconds
    • Plug the unit back to

    Also, take a look at the steps in the document found here.  The document is not directly applicable in the present case, but the steps are the same for your question.

    Let me know how it goes.  If this does not solve your problem, then I have the steps to perform a factory reset on this product to see if an internal reset will be able to get the device to work as expected.

  • Latitude C640 with 1470 mini pci wifi has very low signal strength

    I just installed 1470 broadcom mini pci card with the 4.10.40.0 (from decompression R115321.exe) on a Dell Latitude C640 driver version.

    The card sees the network and connects, but I must be withinn 5 feet from the router, and even in this case the signal is 'Very low' (an or maybe 2 bars). I can communicate with various other wireless cards on other laptops with the full signal strength during the major part of the House.

    Why the intensity of the signal would be so bad?

    Is the 1470 is not very sensitive? the driver is bad for my setup? is there an INCOMPATIBILITY between the 1470 and the DLink DI-524 router? Is this an indication that the antenna on my wifi card is damaged? (I got it on ebay)

    Any help would be greatly appreciated.

    Thank you.

    Latitude C640

    Windows XP SP3

    Wireless 1470 mini pci card

    connected to the Dlink-524 (firmware 1.11) wireless router using WPA - PSK encryption


  • Satellite A100 - very low speaker volume

    Hello

    Recently, the volume of my speaker has been very low - barely audible.
    The speakers are Realtek High definition.

    The volume is set at 100%. I checked the properties of reading, recording and sounds and they all work very well.
    The problem occurs if I play CDs, videos online or applications such as RealPlayer - anything really.

    Any advice would be much appreciated.

    Thank you

    Gary

    Hello

    I guess you are which means that the sound card (it s Realtek High definition) and not speakers ;)
    However, have you checked the settings in the control panel-> Manager Realtek HD?

    Do it! There are a lot of different parameters that control the quality of the sound and there you can assign different audio effects

    I think you should check this certainly!

  • Page Firefox blocks, led busy, very low cpu on some sites. I have an example.

    Firefox 41.0, win 10 Pro x 64.
    Recently (possibly before v.41) pages Firefox hang with very low cpu on some sites.
    Firefox itself is not hung, but for this tab, the indicator of the clock continues ticking.
    I open the problem while another tab has the problem.
    Some data on the website are generally displayed (context?).
    There may be a redirect/refresh any (full proposal).
    Note: in this case, the web site is grayed out.
    Example: https://www.code42.com/store/
    Problem is when I navigated to the URL above. Also occurred when I pasted the URL.
    Works in Version Chrome 45.0.2454.101 m.
    Working on board 20.10240.16384.0

    Note: right now, I'm trying to upload an image, the download is not finished. Ticks of the clock.

    I will try to present this anyway.

    I was about to follow the instructions in the above message, but tried the web site to verify that the problem continues. There can be no. I don't know what I've done (maybe I cleared the cache I've been poking).
    Anyway. Please close this incident.
    And thanks for your help.

  • Very low volume on Portege R500

    The volume on my R500 (R500 - 11 c to be exact) is ridiculously low. Only with the volume at maximum (100) and using headphones I hear nothing, and even in this case, it is far too low to be useful. I can just do the test sounds to the left and then good listener when using his test detected in Control Panel-> Sound-> speakers (there no helmet to choose)-> Properties-> Advanced-> test. Unplug the headphones I hear nothing in the speakers, because of the (very low) sounds made by the fan and HARD drive. Play music (with headphones) I can just do the sounds are produced, but I can't even on what is happening.

    I tried the things mentioned in the "Satellite 5105-S901 sound is very low (even at max volume) to aid driver Toshiba ' thread without success (including the Loudness equalization).

    I am running Vista Business 32 bit and have tried the driver_audio_realtek26117B.exe, driver_audio_realtek_TC00157600B.exe and Vista_Win7_R243_x86.exe the driver files and also used the util_mute_off_25847B.exe utility.

    Enabling silent makes the already weak sounds go completely silent, so I don't think it's a matter of mute.

    Jack detection works, I can see that in the Realtek HD Audio Manager program. Using sound test of this program (Configuration of the speakers) I have to go to a completely silent, and even in this case I can't hear something on the right headphone. (I think, it's darn so low, that I could imagine I hear.)

    Decreasing the volume slider sound 100 harder almost inaudible noise similarly points out, and around 45 it is more audible even in a quiet room with headphones.

    So it seems that I somehow need to reset the audio chip in a 'normal' level Or it is broken and does not display anything more audible.

    Does anyone have ideas, what I can try next? I can boot XP or Linux, if anyone has any ideas on how to get her here, just to start. (They are silent as well, I did not like extensive tests under those as Vista).

    Hello

    According to your message, you have tried to increase the volume by using all possible options
    Have you tried to increase the volume in Control Panel-> Realtek HD audio manager?
    Check this box

    You also tried to update the Realtek audio driver.
    Did you use the Realtek page directly?
    Check it!

    If this will not help, you might try the laptop with the new system recovered

    But if this does not improve the volume, then this could be a hardware problem

  • Portege A200: Very low transfer wireless speed

    I have a router broadband wireless-B (brand linksys, model BEFW11S4 v4.0) and have problems connecting to it with the antenna WiFi integrated on my Portege A200. The connection is weak, with a very low speed (like a modem) transfer and also quite erratic, often dropping.

    It doesn't seem to be anything wrong with the antenna itself, as it has worked well elsewhere. The router also seems to be fine - in fact, I have a capable of achieving a good connection to it from my computer if I use a second antenna for a card PCMCIA Wireless-B.

    Can someone give me a clue as to what can happen? Y at - it a setting I should change, or is it possible that there is a mismatch between the laptop and the router?

    Thank you

    Hello

    Well, I guess for download and reinstall the latest WLan driver on the Toshiba site. This could help to solve this problem.

    Best regards

  • Satellite A500 - very low micro - Windows 7

    I just bought a Satellite A500-026 and although I increased the gain and the boost to the microphone up and turned on and off modes of noise control three microphone, the microphone performance is very low and essentially unusable unless we talk very loud.

    This happens with the provided standard registration program webcam and Skype. Note that the laptop came with Windows 7 installed.

    As I am 500 km the nearest reseller, can anyone who has an A500 comment on the 'power' of the microphone in their experience.

    My Bluetooth headset and MIC work fine, but it's a pain to have a webcam made marginal by running poorly built in microphone.

    Thank you
    John

    It is the same on older models of laptops. You simply have to come close to the microphone.
    For this reason, I always use headset and people who I talk to hear me perfectly.

    You know, this built-in microphones are not so perfect and you can't expect better performance and compare it with standard headphones.

Maybe you are looking for

  • issue of white macbook

    I have about 40 old white MacBook about 5-7 years (not sure).  During Thanksgiving weekend, 2 of them had something to do where an article has increased in size to the point where the pavement jumped out of his position.  I don't know what's under th

  • Why my PC closed when it is supposed to wake from sleep?

    I've recently updated to an SSD and use it for programs and Windows and my SATA hard drive is my documents.  Installed everything ok, but now when I press the sleep button on my keyboard, it will stand by ok, but by pressing the power button on my To

  • Pavilion g6 1326sa: driver internet

    I'm a complete novice. I installed W7 on my g6 but still can not internet.  I downloaded the bios and driver for Broadcom Wireless LAN Driver for Microsoft W7.  But no luck.  If I downloaded all the drivers, would it confuse the laptop?  Does anyone

  • SD memory card reader does not

    Hi ive upgraded windows 7 to 8.1 now my sd card reader stopped working in my hp touchsmart 310pc that someone else has this problem and how to solve this thanks a lot. alsithy48

  • Photosmart B210a, CN216A still not connected to my wireless network.

    Why won't my printer B210a Photosmart wireless connect to my wireless network?  He continues to disconnect. I continue to run the software installer and he works briefly, then it disconnects again.  Help, please.  I'm not what else to do. I've tried