Monthly hardware diagnostic test

Similar Questions

• E9270t, i7 CPU, HP hardware diagnostic test indicates that a single CPU core running

  Case running the diagnostic test of the HP hardware (PC Doctor) a CPU error message is 'MISCONFIGURED. There are four cores in the processor and only 1 is enabled. »

  Suggestion is to reconfigure in BIOS or contact HP support.  There is no option that I don't see in the BIOS and support HP is baffled by the question.  Any Suggestions?

  Use HP Support Assistant to check your hardware configuration. What version of PC Doctor are you running?

  Start the Task Manager and click the resource button and go in the CPU TAB.  Processor how much exercise?  To slow down loads or light only 1 processor may introduce active.  Allow a fire to run a task intensive cpu run awhile and then reverse back to the Task Manager.  Now, what do you see? If you then see a busy processor so here's another idea.

  In the window RUN, enter: MSCONFIG

  Go to the tab startup and then advanced options.  The number of processor box should be grayed out (not checked).

• HP Hardware Diagnostic test

  I ran the HP's Diagnostic Test twice and he came the same twice (Test to go snack) ME516-16W error code. Error code (checkerboard Test) ME516-15W. ME516-17W error code (a left walk Test). ME516-18W error code (a right walk Test). Error code (model auxiliary Test) ME516-3W. ME516-5W (Advanced Pattern Test) error code. The rest of the test came out good. Anyone know what could be the problem and what should I do about it? Thanks advance.

  Coordinates:[personal information deleted]

  Please, turn off your computer and remove the memory DIMM. Then, use a can of compressed air, blow gently dust and dirt on the memory locations. Now put the DIMMs and test your computer again by using the HP Test's diagnosis. If the errors continue, please remove all except one DIMM and test the computer again. Tests if DIMM, remove it and put it aside. Continue his tests the remaining DIMM in the same way, taking care to note that DIMM is good and which are bad. If all DIMMS test good or bad, retest them in another location.

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• G7-1222nr Pavilion: hardware diagnostic test failed

  ID of congestive GSMAXS - S 5, 9859 - MFPV5F - 60W503

  Rebecca Goveia

  Here's a technical video of hard drive replacement. Not too difficult.

  https://www.YouTube.com/watch?v=nSq-sWUFyOc

  Your laptop can use any 2.5 inches wide and 9.5 or 7 mm thickness mobile SATA hard drive where solid state drive. Although they are a little more expensive, I always recommend an SSD instead of a mechanical drive since the upgrade of performance is something you must see to believe. Most of the people who went to SSD swear that they will never return to a mechanical HARD drive. However, some people are on a budget, I know. Portable hard drives are more exotic products. You can pick one up at Best Buy or even Office Depot or order a delivered in 2 days on amazon.com

  Here's a good example of a 1 TB hard drive 7200 rpm:

  https://www.Amazon.com/HGST-Travelstar-2-5-inch-internal-0J22423/DP/B00B4QESVQ/ref=sr_1_1?s=electronics&ie=UTF8&QID=1466337733&SR=1-1&keywords=2.5+inch+7200+RPM+hard+drive

  Here's a concert 480 SSD:

  https://www.Amazon.com/SanDisk-Ultra-2-5-inch-height-SDSSDHII-480G-G25/DP/B00M8ABFX6/ref=sr_1_10?s=electronics&ie=UTF8&QID=1466337813&SR=1-10&keywords=500+gig+SSD

  If you need assistance. Was the computer laptop all upgraded to Windows 10?

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Hardware error code Diagnostic Test

  During a hardware diagnostic test the short self-test gave me an error code of HD521-2W.  What does that mean and how do I fix?

  Here are the specifications and configurable options for your desktop HP Pavilion Elite HPE - 310 t CTO. Since it is a configuration in the application system, you will need to determine what size and type of hard drive is in your computer based on the invoice of your order. Please consult this HP document entitled "adding or replacing a hard drive" for instructions on replacing your hard drive.

• Pavilion p6537: 6.0.5418.39 Hardware Diagnostic tools

  After the upgrade to Windows 10, my monthly hardware diagnostic tool did not work. Received a device discovery error suggesting I restart the program or restart my computer. I performed two operations and diagnostic tool still does not work.  Would that be the upgrade of Windows 10 or just a corrupted file?  Never had a problem with this tool before.

  Hello

  Are you referring to the HP Support Assistant?  If so, uninstall the old version via the Control Panel - program and features, and then install the New HP Support Assistant.

• The hardware diagnostic tool advises that the SMART short self-test has failed.

  The hardware diagnostic tool advises that the SMART short self-test has failed.

  Is this a problem? What can I do about it?

  Atelier42 wrote: the hardware diagnostic tool advises that SMART short self test failed.

  Is this a problem? What can I do about it?

  Hello Atelier42, this usually indicates that you have a hard disk failure.

  I would like to back up my data as soon as possible, just in case the hard drive breaks down actually.

  You must also make sure that you have the HP Recovery restore set for your system recovery disc in case you do not want to replace the hard drive.

  With this restore HP Recovery disk set, you could replace a defective hard drive and use this disk set to your HP system back as it was when shipped. Then, you could put your data saved on your system.

• What is 5.1.4861.15 hardware diagnostic tools

  What is 5.1.4861.15 hardware diagnostic tools

  Hi Floyd,

  If I am right, it is actually PC-doctor, Inc. Hardware Diagnostic tool which is distributed by some computer program of PC Doctor OEM manufacturers.  The number seems to be a somewhat older version (possibly published with XP systems).  They still do and I have versions for XP, Vista and even Windows 7. If you have upgraded your operating system, the program may or may not work more.  It doesn't seem to be something that you can buy directly (and I don't think that it can be upgraded) - but your computer manufacturer might be able to say more about it.

  Here is the current information on Program OEM's PC Doctor: http://www.pc-doctor.com/pcd_windows.php.  I know that HP and Compaq and Acer and Fujitsu used and can still - and I saw obsolete links and now gone listed this specific version of the program on their systems - but none of their websites discuss the version even if some do not discuss the existence of a program of diagnostics of equipment and how to use it.  Here is an example: If the computer is running XP so that it looks like this (unfortunately not a download link, just info): tests for hardware problems using PC-Doctor - HP Customer Care (United States - English).

  I don't think that it is malware - if I'm wrong.  If your manufacturer says that it was never installed on your computer, so I guess it's possible, but I found only about above it and no mention of all malware related.  In any case, if it was never installed on the system by the manufacturer, then I would probably not use it and may even consider uninstalling just to be on the safe side.  If it has been installed by the manufacturer, try running it to see if it provides you with hardware diagnostic information.  If it crashes or fails to run if you have an operating system upgraded from the original installed OS, then it is probably not compatible and I would just uninstall it as it will be of no use and cannot be upgraded (unless the manufacturer provides one, but it is unlikely) and is just too much room.

  Yet, it can't hurt to run some checks for malicious programs.  Update and run a scan complete with your current AV program.  Then, try the following programs if you do not, because they can help. I recommend you download, install, update and run full scans with Malwarebytes:http://www.malwarebytes.org/ and SuperAntiSpyware:http://superantispyware.com/ and then run a full scan of Microsoft Security:http://www.microsoft.com/security/default.aspx.  If they are all come clean and do not show this as a problem, then I would say it is more likely is not malware and don't worry in this regard.

  I hope this helps.

  Good luck!

• Modem failed the diagnostic test

  I ran a Windows diagnostic test and it came with this test failure modem Agere Systems PC1Soft MC921-2w what it takes please

  Hello

  ·         What is the brand and model of the modem?

  ·         What were the changes made on the computer prior to the question?

  I suggest you contact your ISP or Modem manufacture to improve assistance on the issue. In the meantime, you can follow these steps and check if that helps.

  (a) reset your modem. See the documentation for more information on how to reset the modem.

  (b) If you have an external modem, make sure that you use the right cable series. For more information on the requirements for a proper wiring, refer to the section 'Wiring required Configuration' in aid of Dial - Up Networking.

  (c) If you have an external modem, make sure that the serial cable is properly connected.

  (d) If you use an adapter to connect your external modem to your serial port, make sure that the pin adapter is wired properly for modem communication. For example, a 9-to-25 pin for a mouse adapter malfunctions with a series of RAS configuration.

  (e) test the serial port or multiport card and replace the adapter if necessary.

  (f) ensure that the modem communication protocol options are configured correctly. See the documentation for more information about the different transfer protocol options that are available for your modem.

  (g) contact the modem manufacturer to see if the initialization and configuration information are available for your modem. Also, check the Windows hardware compatibility list most recent (HCL) to make sure that your modem is supported.

  (h) use the Device Manager to remove the modem. You can do this in safe mode or in normal mode. Restart the computer in normal mode. Windows XP will detect the modem and reinstall the proper drivers.

• Diagnostic test error: drive hard hitachi failed the diagnostics tests

  My computer is a HP Pavilion 6500 series; Windows 7 64-bit. under 18 months.  Receipt of the following error messages to a HP diagnostic test: drive hard Hitachi failed the diagnostics tests: test to look at random; funnel seek test; surface scan test. Please notify.  I need to replace the hard drive?

  Hi Pete,.

  You are welcome.

  It is difficult to say exactly why the HARD drive started to fail and there's always a random item concerned - I've known a few hard drives fail after a few weeks, while others can be quite happily far longer than expected.

  Best regards

  DP - K

• Hardware diagnostic tool

  I have a HP Pavilion G7-1329wm running windows 7. I does not seem that hardware diagnostic tool program.  He seems to be spent on other portable HP like mine, and so I was wondering if there is a place I can download it? I used a link (sp4437.exe) I found on the forum, but after installing it, it says 'this version of diagnostic tools is not approved to run on this system. Y at - it an older version that I need?

  Thank you in advance!

  Your computer uses a Diagnostics UEFI support environment to test the material for questions. Please see HP computers - UEFI and the Start Menu for instructions on using the features of Diagnostics UEFI. Hit "F2" or "ESC" then "F2" at startup should show the UEFI Diagnostics page.

  Download and install the environment of Support HP Unified Extensible Firmware Interface (UEFI) for a version update of the UEFI Diagnostics.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• This procedure is a diagnostic test.

  The question how to delete this file EtreCheck found:

  ~/Library/LaunchAgents/com. [email protected]-SharedServices.Agent.plist

  /System/Library/frameworks/CoreServices.framework/frameworks/OSServices.framewo rk/Versions/A/support/CSConfigDotMacCert - /Users/GeoffreyMcCabe/Library/Logs/[email protected]- SharedServices.log u l @me.com SharedServices s t

  Search me has led to an older discussion-"this procedure is a diagnostic test"...

  I ran the test recommended in the Terminal, but this window says there are invalid characters...

  Are there any alternatives to the procedure or updates?

  Thank you...

  Open your library folder of the user by holding down the Option key and selecting the library from the menu go to the Finder.

  Find the LaunchAgents folder and open it.

  Search for the file with the same name as on the Etrecheck and delete it.

• Satellite M40: Modem fails the diagnostic test on WinXp Pro

  Satellite M40 comes with Windows XP Home Edition pre installed and when I ran the diagnostic tools to test the modem the modem passes the test. But when I installed Windows XP Professional SP2 media center, the modem fails the diagnostic test.

  What surprises me is that I have not received any error during installation and all devices, including the installed modem OK with no problems.

  Another observation when I tried to connect to the Internet using our dial back of company during installation of Windows XP Edition family's volition I remembered and the modem responds very well. But with Windows XP Professional SP2 media center installed the modem call how ever in "waiting for call-back ', when the server of our company try to call me, the modem does not respond and waits until I get the message Time out

  Please if anyone has an explanation for this decision No. let me know because it is driving my nuts.

  Thank you
  Oumy

  Hello

  Have you tried to install the latest driver of modem? Please check if you have the right driver for Win Xp. You can find the drivers on the Toshiba site.

  http://EU.computers.Toshiba-Europe.com

  They are a lot of drivers for countries individually.

  In addition, Windows XP SP2 includes the new Windows Firewall. It is possible that the firewall is preventing the modem connection. You can try to disable the Windows Firewall.

  Good bye

• 360 11 X - n012na: Diagnostic test

  The customer service was asked to run the basic diagnostic test.  This procedure has been stuclaimed on 17% estimated time remaining 12 minutes 13 seconds for more than two hours!   It is safe to say that my laptop once again froze.  I'm giving up test.  Quick test has been selected.

  Jules9906

  Was it a test drive? If so, it is blocked like this, which indicates that your hard drive has failed and needs to be replaced.

  If it's a different test, I don't know what to tell you.

  Whatever it is, you can turn it off without damaging the PC.

  Good luck
  ========================================================================
  I'm a volunteer and I do not work for, or represent, HP.
  ---------------------------------------------------------------
  If my post helped you, please click on the thumbs-up symbol to say thank you.
  If my posts resolved your issue please click "accept as a Solution.
  ========================================================================

• HP TouchSmart 300-1020: buttons HP Support Assistant diagnostic Test does not

  I have HP Support Assistant version 7.7.34.34, which - I think - is the right version for my TouchSmart from HP with Windows 7 64-bit 300-1020.

  When I try to run a diagnostic test (optical drive, USB key, sound card test, test test the printer, hard drive, keyboard, map chart, microphone, mouse), the button snaps (with mouse) for diagnosis, tests do not work.

  Basically... I click on the button for the desired... diagnostic test and nothing happens!

  Troubleshooting apparently buttons function very well... click on one and a convenience store starts.

  What can I do to "solve" the problem of Diagnostics button?  Thank you!

  You are welcome.

  Since your computer is 6 years old, I suggest that perform you a System Recovery.  I do this at least once a year because I like a computer that works like new without any problems.