Monthly updates of Windows 7 turned into a nightmare experience (very slow)

Similar Questions

• I update my windows 7 sp1 and etc., now boots very slow, also other application works too slow.sholud I unintall all updates?

  I update my windows 7 sp1 and etc., now boots very slow, also other application works too slow.sholud I unintall all updates?

  Hello

  1 are. what other applications you referring?

  I recommend you to uninstall Service Pack 1

  I suggest that you follow the steps mentioned below to refine the question causing third-party software (as applicable).

  Step 1:

  Test the issue in safe mode and check if the problem persists.

  Step 2:

  If your computer very well in safe mode functions, I would pt you your machine ├a State clean startup in order to eliminate conflicts of third party software.

  Note: Follow step 7 to restart your computer in normal mode

  See also: slow PC? Optimize your computer for maximum performance

• installed the new windows Friday and since my computer is very slow and not connecting to internet properly

  installed the new windows Friday and since my computer is very slow and not connecting to the internet correctly... anyone else having these issues?

  System Restore to go back before the show.

  I suggest you to install the updates one by one and reboot the computer after installing each update to verify that update is causing the problem.

  Also note the updates that you install on the computer.

  Once you come to know what update is causing the problem, let us know.

  Do not install any driver updates offered by Windows Update. Find them in the manufacturer's website instead.

  Try a convenience store

  Windows includes two programs of troubleshooting that you can use to automatically fix some common problems with performance on your computer or to the maintenance of your system.

  Open the Performance troubleshooting utility by clicking the Start button, then Control Panel.

  In the search box, type Troubleshooting, and then click Troubleshooting.

  Under system and security, click check for performance issues.

  Open the of System Maintenance Troubleshooter by clicking the Start button, then Control Panel.

  In the search box, type Troubleshooting, and then click Troubleshooting.

  Under system and security, click run maintenance tasks.

  08/14 / 1115:46: 45 pm UTC

• I have a HP laptop with Windows 7 (OS) with 64 bit, but very slow. Can you suggest a way to start my fast pc.

  I have a HP laptop with Windows 7 (OS) with 64 bit, but very slow. Can you suggest a way to start my fast pc? Most of the time it doesn't quite work.

  Hello

  There are a number of possible reasons, your computer may run slowly - virus infection or malware, missing to defragment the hard drive, too many programs loading at startup - and all with different causes / solutions. So here goes:

  Virus/Malware - Download, install and run these scanners (only Avast so you do not have your own antivirus installed):

  Malwarebytes': http://download.cnet.com/Malwarebytes-Anti-Malware/3000-8022_4-10804572.html .

  SuperAntiSpyware: http://download.cnet.com/SuperAntiSpyware-Free-Edition/3000-8022_4-10523889.html .

  Avast Antivirus: http://download.cnet.com/Avast-Free-Antivirus/3000-2239_4-10019223.html .

  Disk Defragging - install and run this app: http://download.cnet.com/Auslogics-Disk-Defrag/3000-2094_4-10567503.html .

  Startup programs - install this application, then select start only the programs you need to run at startup, as your antivirus, firewall, but not your Disk Defragmenter (examples):

  Splash Guard: http://download.cnet.com/Startup-Guard/3000-2239_4-10958203.html.

  Also, your system's drivers are up-to-date? Updated the driver can also slow down your system. Go to HP.com and insert the complete your laptop model number in the search box to find your latest drivers.

  Let me know if these speed up your pc.

  Kind regards

  BearPup

• window frame turns into line while moving

  1. When I try to move a window on my desktop it changes online, but before I could move the window without it turning into lines and here is his picture http://upload.tehran98.com/img1/fqs6cih4487gulljnm2.jpg

  Hello

  I need these configuration

  1. which OS and version you are using
  2 specify display adapter and seller of laptop
  3 have. you you checked with reinstalling the OS

• Using Windows Vista and IE9. Computer is very slow.

  My system is installed with windows vista and using the Explorer 9. My syster is very slow. How can you help me?

  Original title: my system is installed with windows vista and using the Explorer 9. My syster is very slow. How can you help me?

  Hello

  See if this helps you:

  Search for malware, if necessary using the safe mode with networking.

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Once in Safe Mode with network, download and run RKill.

  RKill does NOT remove the malware; It stops the Malware process that gives you a chance to remove it with your security programs.

  http://www.bleepingcomputer.com/download/rkill/

  Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  You can clean your hard drive using these two methods.

  "Delete files using Disk Cleanup"

  http://Windows.Microsoft.com/en-us/Windows-Vista/delete-files-using-disk-cleanup

  Using the free CCleaner program:

  http://www.Piriform.com/CCleaner

  In NO case use the registry cleaning Option in CCleaner

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Update drivers:

  Access the site on your computer or equipment manufacturing > Driver and Software Support Section > search your computer or hardware model number > then your operating system > locate the correct drivers > download and install.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  "Optimize Windows for better performance.

  http://Windows.Microsoft.com/en-us/Windows/optimize-Windows-better-performance#optimize-Windows-better-performance=Windows-Vista

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  It would be a good idea to run the System File Checker tool to see if you have corrupted files

  "How to use the System File Checker tool to fix the files on system missing or corrupted on Windows Vista or Windows 7"

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  If SFC detects serious flaws, you may need to perform a repair upgrade Installation or relocation complete if you don't have a Vista DVD from Microsoft.

  If you can borrow a DVD of Vista from Microsoft you save doing a reinstall full:

  "How to perform a repair for Vista Installation"

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  See you soon.

• Windows 7 RC 7100 - Chrome and IE8 very slow browsing

  I just downloaded Win 7 RC 7100 - navigation is very slow on IE8 and Chrome.   Any ideas?   I hv checked the NETWORK card settings, run TCP optimizer based on CSSTidy but not luck...

  Any advice will be appreciated.

  Thanks

  http://social.technet.Microsoft.com/forums/en/category/w7itpro/

  Above is the link to the Windows 7 Forums.

  This is the right place to ask questions of Windows 7.

  Here is the Vista Forums.

  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.InternetExplorer.General&cat=en_us_28cca3eb-7037-4D4F-bde1-d8efee1f1420&lang=en&CR=us

  And a link for the Internet Explorer newsgroup.

  See you soon. Mick Murphy - Microsoft partner

• Lightroom CC running slow after recent update. [was: most of the time it's very slow]

  After that the 2015 update is very slow to 90% of the time

  Hi raleighg,

  Suggest you follow the steps below:

  1. go in the Lightroom preferences > General > uncheck "Show Add Photos Screen.

  2 preferences > Performance > uncheck "use the graphics processor.

  3 restart Lightroom, and check again.

• My automatic updates of windows is turned off and I can't turn it back on

  Hello

  2 days ago, I had a virus and got rid of him, because I can't seem to be able to turn my Automatic under updates. any suggestions?

  Hi Stephanie,

  ·         What happens when you try to activate the automatic updates?

  ·         You receive an error?

  You can check if this article helps.

  You can not turn on automatic updates on a Windows XP Service Pack 2 computer

• My update of windows just 'turns' forever and gets no update for may 2016 - convenience store does the same thing

  Any suggestions?

  Yes.

  Windows 7 update problems? First read this.

  :)

• Update of Windows 8 + laptop into a reboot loop

  I initially had the problem that my apps detect that there is an internet connection, so I started to do the following steps:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-networking/Windows-8-apps-no-Internet-connection/09c89430-eabf-4d67-b56a-4e22662f26a7

  According to method 2, I completed step 1 but when I restarted, he started to update. When it restarted it said she has been updated all the way up to 100%, but then he goes to another screen and says to restart and it repeats again and again and again. How can I possibly fix it if I can't get to a screen that says?
  Thank you.

  I left my laptop on unplugged overnight and in the morning, the battery was dead so I started it up and it worked. I literally did nothing. Thanks for your reply though!

• Replacing the hard drive and Recovery console repair turns into a nightmare of activation

  I took the hard drive of a computer dell laptop is no longer used and put it in my current toshiba laptop (in which the hard drive was dead prior).

  I had my laptop to accept the hard drive by using the recovery console and do a chkdsk with the repair option. After repairs the laptop now wants to be activated.

  So now I use my laptop with a hard drive built to a dell computer. Of course, I uninstalled all the bloatware and replaced all the drivers with the right. the hard drive works fine with my laptop. This isn't the problem.

  My problem is that windows will not activate. It is a genuine copy of windows xp home edition, purchased from dell. I got through all of the activation methods and they tell me that the installation id is invalid. I'm basically a big circle with phone support to web support.

  If my product key is known to be valid for windows xp family when he was on the hard drive in the computer dell laptop, why is it not valid when traded to the computer toshiba laptop and why used someone help me with this problem. I can't be the only one that this has happened?

  as a reminder, swapped a hardrive is no longer in use of the computer, a work computer. has ran chkdsk to fix disk errors, after reboot windows is enabled is no longer and requires activation. Activation Assistant will not accept the installation as id being valid and would call support, when I go to real profit online to activate it also error. How can I activate this well-known work product id? I'm not hacking because he is no longer in use, basically, I am on a windows xp home edition right now and nobody will help me.

  Thanks in advance

  Dan

  The hard drive Dell has a "Dell" OEM of Windows XP version and a "Dell" product key (and might even be locked BIOS) that will not work on your Toshiba.

  As with all versions once installed on a computer/motherboard OEM it cannot be moved to another PC.

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• sometimes can not log into the server or very slow to make so.green bar downstairs is fully informed and he's there with the wheel spins as it tries to plug?

  Can't all the time. Many time running without problems. When problems seem not to be like that for a while as an e-mail message. Just did an email and wheel turn and try to send. "Cannot connect to Server" in my opinion, is what happens. Press Cancel, entered Envoy file to see if went thru (sometimes he does this when he says he did not send) not in the folder sent, has started the new email and redone and it sent fine?

  They told looks that the question of thunderbird and no provider?

  My sent file is small. Thought this might help then deleted more old that I did not move from customer records.

  If it does not work at the same time, but working again later, it is unlikely that the problem is with Thunderbird.

  You can try to disable email scanning in your antivirus software.

• ISE Posture Windows enter password to view the desktop very slow

  Hello, had a problem of slowness that I don't know how to solve problems.  ISE 2.0 patch3, AnyConnect 4.3.02

  My setup is Anyconnect which is already on the computer windows laptop 10, EAP with TLS chaining for authentication of the host and PEAP for user auth.  ISE Posture checks for windows AV defs and AV windows install.  AnyConnect has 'start before logon' installed and * just work *.  Boots of the user, auths from the machine before the connection of the user, user logs in and ISE Posture check runs and passes.  The user gets the green checkmark on the line.

  With a little problem.  At the time wherever the user types the password and hit enter, the grip of the Welcome screen for about 45 to 60 seconds, a few rare occasions longer, my high water line is 1 minute 12 seconds.  Meanwhile machine auth and auth user spend with the unknown state of compliance in the live of the radius of ISE log.  Then welcome screen disappears and the bureau paints (finally), at this time, the machine cannot access anything on the network, 5 seconds later the Anyconnect client starts.  1 second later the bumps network connection, and the analysis of the Posture of ISE in the Anyconnect client starts.  Analysis of the Posture of the ISE takes about 7-10 seconds to complete.  After that everything is good and the user can access the network.

  If control of Posture of ISE is deleted, the whole process takes 10-15 seconds password entry the user to be able to use the laptop and access the internet.

  Does anyone have an idea whence this 'start delay '?  Feels like a timeout of some sort.  It happened on this latest version of the Anyconnect and 3 previous ones as well.  I concentrate on my test machine windows 10 laptop, but the same thing happened on 4 other test systems which are a mixture of windows 7, 8.1 and 10.  The 10 win test system is a lenovo x 1 carbon with an SSD and is normally fairly quick.

  All the tips are greatly appreciated.

  e-

  Do you have the port in a vlan to auth machine and then change once the machine and the user connects? Also, you will probably need to open any acl you apply while the posture is 'unknown '. It is usually due to some AD access that is blocked.

• PC running windows xp sp 3, but is now very slow and frustrating

  Slow business and research, freezes regularly

  Hello Gogas,

  Often we see the slow behavior as the result of a program from loading at startup.

  To solve these, we use the clean boot troubleshooting.

  The following describes this process:

  http://support.Microsoft.com/kb/310353

  http://support.Microsoft.com/kb/316434

  Best regards

  Matthew_Ha