More adapted function FFT

Similar Questions

• JO HP 6500 has more 'fax function disabeled.

  I have a HP 6500 has JO more I bought several years ago. I used the function of fax for a while because I had a landline. Got rid of the landline so didn't use do not fax on the printer. I don't remember if I've done something somewhere, but now I get a message on the printer when I press the button on the fax that this feature was disabeled and I need to contact the administrator. What does that mean. When I go to EWS also cannot configure Fax Wizard Setup a network connection error message. Check the network and try again. When I go to home button on EWS it says error system, network connection error. Check the network and try again. What I did and is anyway to fix what I can get the features of fax again.

  You check private messages.

• An email is more fully functional with version 31.0. He worked on all the previous versions.

  My email is 'SmarterMail' and the email provided by DiscountASP.net, my website host. It is my main email account. The homepage (where I can see all my email) is fine, but when I click on a particular email to read and/or reply to it, the next (which is essential) screen appears somehow under contract, do not allow me to do all that it contains. When I try to manually expand the screen, it automatically bounces to tiny every time.

  Same story with v. 31.0 on my Windows XP Home and my Windows 7 computer. The same email problem.

  I can provide two screenshots (one showing correct display, the other, v. display 31.0) if someone can tell me how to include/upload!

  As a temporary workaround solution, try to maximize the window (in Windows, you can double-click on the title bar).

  The seller has a patch for this, but it may take some time to unwind.

  More information: https://support.mozilla.org/questions/1013240

• X 230-cannot turn off the Adaptive function contrast or backlight?

  X 230, have tunred off the coast of the brightness and adaptive contrast in Intel and power settings, but the screen becomes even darker on the dark pages and then lit upward on whites.

  All the hidden settings should I Explorer?

  
  

• ALT TAB and Windows plus button more TAB functions the two has stopped working

  I have windows vista ultimate and my daughter was playing on the computer. Now the Alt tab function and the windows tab function when you hold the windows key and press tab to scroll through your programs no longer works. I searched through the Control Panel, trying to find where and relight them this setting but can't seem to locate. Anyone know how to activate these functions?

  Hello

  Click Start and type services.msc, and then press . Click on continue in the UAC prompt. Scroll and click on the themes service, and then click Start/restart option in the left column. Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• Make it more modular functions

  Here's what I have...

  for (var i: int = 0; i < numberOfChildren; i ++)
  {
  nor = new newsItemButtonMC();
  
  NI.x = numLeftPad + ((niWidth*i) + niSpacing);
  NI.y = 3;
  ni.buttonMode = true;
  ni.mouseEnabled = true;
  ni.textNumber.text = (i + 1);
  
  ni.addEventListener (MouseEvent.CLICK, showItem1);
  ni.addEventListener (MouseEvent.MOUSE_OVER, showTitle1);
  ni.addEventListener (MouseEvent.MOUSE_OUT, hideTitle1);
  addChild (nor);
  }

  
  Without knowing all the ins and outs you can always get the general idea.  I create several buttons, change the title on them, and then add event listeners.

  I want to make this as extensible as possible so I need to be able to build 1 function that can handle "showItem.  At the present time, showItem1 that...

  function showItem1(e:MouseEvent):void {}
  itemNum = 1;
  showNext();
  }

  It is, essentially, the action for "button 1.  I need to be able to do the action for all the buttons so I want to be able to dynamically choose what value of the itemNum to according to what button clicked on it.

  How do I do that?

  TIA.

  You can try something like:

  function showItem1(e:MouseEvent):void {}
  itemNum = int (e.currentTarget.textNumber.text);
  showNext();
  }

• ENVY 15: Turn off Adaptive display for ca mode

  Hello

  I'm in the curiosity of how I can turn off Adaptive brightness for the external mode display.

  http://i.imgur.com/nnDnd9Y.jpg

  I already turned off in Power Options in Control Panel. Initially, it wasn't only to turn off Adaptive brightness so I also disabled display Power Saving Technology for battery operation of the Intel Graphics Control Panel.

  It works like a charm for Adaptive functioning on battery power but display is always active when the external power and I couldn't find an option to turn off in Intel Graphics Control Panel, there is no display of techniques for saving power for external power.

  http://i.imgur.com/WtLe6kB.jpg

  So, how can I stop the Adaptive brightness for current alternative before going blind in the sudden brightness changes when I am plugged into the wall?

  Any help is appreciated.

  Thank you!

  Hi @yldzanl ,

  Thank you for visiting the Forums HP's Support and welcome. I looked in your question about your HP ENVY 15 laptop and wanted to turn down the brightness in AC mode. On your first page it shows you in editing parameters. You will notice that the brightness level, one for battery mode and the other for the AC adapter / CC, they are not the same.

  Change this to be the same for the battery and save the settings.

  Thank you should take care of it.

  Thank you.

• Stop Adaptive contrast on laptop Z710

  I've been struggling with this for months, I can't take more.

  It's a Z710 with Intel and Nvidia GeForce, as well as Windows 8.1.

  My laptop's brightness according to what is shown on the screen.

  On these forums, it is perfectly clear and white. On any other site with a colored background (even worse if it is black or dark grey colors), it darkens. Then, when I switch back to a site with a clear background, he returned to my favorite brightness.

  I can literally barely see then, because I have problems eyepieces and need all the time with a maximum brightness. If I'm trying to play a game or read whatever it is, the contrast is terrible and brightness is low, so it is almost impossible.

  I went into settings Intel and disabled (under the battery), I tried to go in Nvidia, I disabled the sensor via services.msc, I turned off via the control panel. There is no option in the settings menu of charm. What google has offered - I tried.

  Does anyone have any suggestions as to what I can do?

  Resolved.

  For anyone else having this problem, go to the Manager of energy and change your settings to high performance (the rocket). More adaptive step contrast

• The power spectral density function counts inaccurate amplitude caused by the window function?

  I'm new to this forum, so please let me know if this would correspond better to a different discussion forum.

  Here's the question:

  I would like to know if the power spectral density function ("FFT PSD for 1 Channel.vi") automatically compensates for the loss of the amplitude of entry caused by the window function.  In other words, is a specific window correction factor applied within the PSD vi or do I apply manually?

  Details of the background:

  I tried to answer the question myself by generating a sine wave sampling, it as it is periodic in record time (i.e. 0 to each end of recording time).  The frequency of the sine wave was such that the frequency would exactly correspond to a spectral line in the PSD.  Then I generated the PSD of the sine wave twice: once using a Hanning window and once using a rectangular window (not on average in both cases).  The rectangular extent of the PSD with windows to the frequency of the sine wave is 1.5 times the size of the PSD with a Hanning window applied.

  The experience above indicated to me that a manual setting of the PSD output for the function of window was necessary, however, I repeated the above experiment using random vibration data and does not clear 1.5 x factor.  I have also been informed by his colleagues that the PSD should set for the window function.

  Thank you for your comments.

  Spectral leakage.  When you use a finished sample data from the spectrum resulting is the convolution of the spectrum of the signal as if it extended indefinitely in time with the spectrum of the window.  Even if you do not use a window function, you actually have a rectangular window the same width as the sample size.

  Draw out of the VI PSD with all style of trace to show points to the data points. Turn off Auto scale on the X axis, and expand the graph around your pic. Look at the results of different windows.  In any case, there are several values non-null.  With actual sampled data of limited duration, you will never get the idealized line spectrum.

  If summarize you the output spectral value remains close to 3.2 for all windows.

  Lynn

• How to record various objects used by an external C function

  I want to do my own LV component that calls a C function that uses an external API. For the first time, my function is called, it creates and defines variables and some API objects and store them. If the future my function calls do not need to define and create them again. The main problem is that this variables and objects must be different for any instance. I mean: if I have several components to call a library function, the call to my function, running at the same time, I need them to create variables and objects, instead of sharing their own API. So I need to be able to access or to allocate a memory space for each different instance of the NSI component that calls to my function.

  How can I do this with the function of library call? Is there another approach to this? How?

  Thank you very much.

  eduraser wrote:

  OK, I really appreciate this answer, thank you very much.

  Of course, I understand that I need to create a function which deletes, clean, free, etc., all objects and the variables created. But I don't know where exactly call to clean up at the right time. I want to have cleaned up the Labview runtime stops (do not break)... so do I call it as a reminder of the library call feature? Anywhere else? Another option?

  Thank you very much!

  Well in general, you flow "create(), read() read(2)/write(2) () / () use, close() in an application" for any resource and close() would be where you would have to call your function has.

  If you want this fact automatically, half only officially documented way is indeed the named of the dialog configuration node unaptly callback function call library. How is this registrant one or more additional function that takes a pointer as a parameter value. This pointer can be everything you want it to be, and you can configure your function to have an additional parameter which is not exposed on the diagram, but rather helps him pass this pointer.

  LabVIEW maintains such a pointer dataspace CLN instance and calls the callback function that appropriate specified events and pass this pointer to data. For example, you can check in the call to the create function if this parameter is NULL, and if yes to store a handle to your resource in there. When the reminder cancel or abort is called you could go and own up to your resource.

• New XPS 13 cannot turn off Adaptive brightness

  I can't turn off Adaptive brightness on the i5 HD 5500 1080 p on new XPS 13 version.

  Once I consult a dark page, the screen turns off, and when I discover a brilliant page, the screen will get brighter. It's extremely embarrassing, and all the options I've tried have not fixed this issue.

  

  Disabling the option of Adaptive brightness to activate in the advanced power settings does nothing. I have on all levels of electrical energy.

  

  There is no option to turn off what should be in the Intel Graphics Driver.

  

  Disabling the sensor monitoring Service doesn't fix or the other.

  I have the latest version of the Intel graphics drivers. Uninstall, it doesn't fix or the other.

  Install another operating system doesn't fix either, so I guess that it is some kind of hardware problem.

  Does anyone have a solution to this annoying problem?

  To be clear, there is no solution to this problem. No amount of software configuration will fix it. Dell engineers have confirmed that this behavior is controlled by the firmware of the screen.

  Last I heard, Dell is working to expose a switch in the BIOS that would disable the Adaptive function contrasts, although they would not give an ETA on when the BIOS update would be available. (source)

• How to call a function of my html code to js created by animate cc, I had used 'exportRoot.functionName' and said this function in my document of flash pro with html5 canvas, but now on cc animate this way doesn't work.

  My html code created by animate cc was changed to php for me, because I send and received variables via get and catch the cookies and much more. the function that I used to call function on my .fla of the document is passId() and it worked before when animate was Flash pro with html5 canvas.

  

  And function of .fla, I frame_0 only assign to the variable "id_usuario", this is the feature on fla:

  

  First of all, the title of your thread is horrible. Titles are supposed to be securities, not paragraphs.

  As for your problem, you are probably trying to call catchIdUser before it is defined. handleComplete() is raised when the content is ready to run. He did not actually yet. I guess you should have script code call the function of window parent, not the other way around.

• using the function - how to use the values of the input variables on the table select statement names

  Hello community, I have a problem when creating a function. The purpose of this function is to check the table of weather gave yesterday or not. We must check this on different tables on different sachems. We are creating a function with input variables.

  CREATE OR REPLACE FUNCTION IN_SCHEMA.IS_YDAYDATA_TO_TABLE

  (

  in_schema IN VARCHAR2,

  in_tablename IN VARCHAR2,

  in_datefield IN VARCHAR2,

  )

  RETURNS INTEGER

  AS

  -Declaring variables

  v_is_true INTEGER.

  BEGIN

  SELECT

  CASE

  WHEN MAX (in_datefield) = TRUNC(SYSDATE-1)

  THEN 1

  ON THE OTHER

  0

  END

  IN

  v_is_true

  Of

  in_schema.in_tablename

  ;

  RETURN v_is_true;

  END;

  /

  When creating, I got error: [error] ORA-00942 (44:19): PL/SQL: ORA-00942: table or view does not exist

  How to use the values of the input variables on the table select statement names?

  Hello

  Here's a way you can use dynamic SQL statements for this task:

  CREATE OR REPLACE FUNCTION IS_YDAYDATA_TO_TABLE

  (

  in_schema IN VARCHAR2,

  in_tablename IN VARCHAR2,

  in_datefield IN VARCHAR2,

  in_first_date DATE DEFAULT SYSDATE - 1,.

  in_last_date DATE by DEFAULT NULL

  )

  RETURNS INTEGER

  AS

  -IS_YDAYDATA_TO_TABLE returns 1 if in_schema.in_tablename.in_datefield

  -contains all the dates in the in_first_date of the range through included in_last_date

  - and it returns 0 if there is no such lines.

  -If in_last_date is omitted, the search only the data on in_first_date.

  -If in_first_date is omitted, it defaults to yesterday.

  -Time parts of the in_first_date and in_last_date are ignored.

  -Declaring variables

  sql_txt VARCHAR2 (1000);

  v_is_true INTEGER.

  BEGIN

  sql_txt: = 'SELECT COUNT (*).

  || 'FROM ' | in_schema | '.' || in_tablename

  || 'WHERE ' | in_datefield | ' > =: d1'

  || «AND» | in_datefield | '< >

  || 'AND ROWNUM = 1';

  dbms_output.put_line (sql_txt |) '= sql_txt in IS_YDAYDATA_TO_TABLE");  -For debugging

  Sql_txt EXECUTE IMMEDIATE

  IN v_is_true

  With the HELP of TRUNC (in_first_date) - d1

  TRUNC (NVL (in_last_date

  in_first_date

  )

  ) + 1                -- d2

  ;

  RETURN v_is_true;

  END is_ydaydata_to_table;

  /

  DISPLAY ERRORS

  If you must use dynamic SQL statements, put all the SQL statement in a single string variable, such as sql_txt in the example above.  In this way, you can easily see exactly what will be executed.  Comment out the call to dbms_output under test is completed.

  Try to write functions that will address not only the question that you have now, but similar questions that you may have in the future.  For example, now that interest you only to the verification of the data of yesterday, but later, you might want to check another day or range of days.  The above function combines the convenience of a function simple (looks like yesterday data if you don't tell him otherwise) with the power of a more complex function (you can use the same function to check any day or range of days).

• Help with the UpdateView() method inside my function

  Hi all!

  Right, I started my journey to the bottom of the more 'Advanced' way of using Powercli scripting languages and in the process have resulted in a few questions that I try to answer. I have created an advanced function of earlier and was very "impressed" (sorry only word I could think ) with it as it has been very useful in my work on the day the day. This lead me on the creation of the more advanced functions and placing them in a "module" folder\file. However, even if the majority of them is reporting back exactly what I wanted. THE MAIN PROBLEM IS THE PERFORMANCE. We have a very large domain (3000 VMs) and the VM back news taking so long.

  So after having posted on gettting here and thankfully not only my answered by LucD but LucD send me pointers as to where I can go to the question. I read the links he sent me and same have bought book of Steve Jins. My knowledge is improvin, but seem to be stuck here and need help.

  I have attached my function below and would like someone to talk me through the following:

  1. I understand the cmdlet Get-view works now and especially in conjunction with my function below. I tested it and it works great and IS faster than just using the approach of the cmdlet. I understand that the .NET view is simply a larger range of objects that can be much faster retrieve? He has worked and is faster when I tested it. I am so satisfied with the aspect of get-view of things.

  2. now leading me on the method of UpdateViewData() - how can I (or can I?) incorporate into my function. I added in, but I don't know if I used it properly, or even if it's supposed to be used like this if someone can help that will be greatly appreciated.

  Any help would be as always be appreciated

  Thanks in advance

  Munster

  Function Get-VirtualmachinesInfo {}

  < #.

  # >

  [CmdletBinding()]

  (PARAM

  [Parameter (mandatory = $true,)]

  ValueFromPipeline = $true,

  ValueFromPipelineByPropertyName = $true,

  HelpMessage = "Please enter the VM name")]

  [ValidateNotNullOrEmpty()]

  [String []] $VMName

  )

  BEGIN {$OutputObj = @ () # output initialization object array

  }

  {IN PROCESS

  Try {}

  {Foreach ($VM to $VMName)

  If ($VM. GetType(). Name - eq 'string') {}

  Try {}

  $VM = get - VM $VM - ErrorAction Stop

  }

  {} Catch [Exception]

  Write-Warning "$VM is NOT a virtual machine.

  continue

  }

  }

  } ElseIf ($VM - isnot [VMware.VimAutomation.ViCore.Impl.V1.Inventory.VirtualMachineImpl])

  Write-Warning "you not pass a string or a VM object.

  continue

  }

  "$VMView get-View - ViewType Virtualmachine-filter = @{'name' = $vm.name}.

  -Name of the property, config, summary

  $VMView | %{$_. UpdateViewData ("VM. "Name", "VM.config", "VM. Summary")}

  $Props = [ordered]@{'Name'=$VMView.name;

  'Version' = $VMView.config.version;

  'UuID' = $VMView.config.Uuid;

  'CPU_Num' = $VMView.config.hardware.NumCPU;

  'CorSkt_Num' = $VMView.config.hardware.NumCoresPerSocket;

  "Nics_Num" = $VMView.summary.config.NumEthernetCards;

  "VHDs_Num" = $VMView.summary.config.NumVirtualDisks;

  }

  $Obj PSObject = new-Object-property $Props

  $OutputObj += $Obj

  }

  }

  {} Catch [Exception]

  THROW "could not get the VM details, please confirm that the virtual machine exists."

  }

  }

  {END}

  Write-Output $OutputObj # exit EXIT pipeline objects

  }

  }

  Fix.

• Failed to retrieve the target data system for FDM 11.1.2.3 HFM adapter

  Hello gurus,

  : Server 1 HFM

  : Server 2 FDM

  Server 3: Database server

  1. I have managed to create an application of FDM using FDM web client.

  2. later I imported the FDM adapter - FM11X-G6-C in the Workbench of FDM and also saved the file fdmFM11XG6C.dll successfully.

  3. We then defined the Machine profile and also specified with the custom sizes available in our HFM application.

  4. we have then configured the adapter with success.

  5. we get the following question when browse us the metadata -> control tables

  Cannot retrieve the data on the target system

  6 log has the following entry

  Error:

  Code...-2147220966

  Description... System.Runtime.InteropServices.COMException (0x8004021A):

  {0F677127-F815-4495-8290-AF2899C9482F}1-2147220966010/16/2013 07:41:57< servername FDM >CHsxClient.cpp282011.1.2.3.000.4045Unknown error

  at HSXCLIENTLib.HsxClientClass.OpenApplication (String bstrClusterName, String bstrProduct, String bstrApp, ppIUnkServer, & object object & ppIUnkSession)

  at fdmFM11XG6C.clsHFMadapter.fConnect)

  Process... clsFMAdapter.fConnect

  Component... D:\FM11X-G6-C_1002\AdapterComponents\fdmFM11XG6C\fdmFM11XG6C.dll

  Version... 1116

  Identification:

  ... The admin user

  ... Computer name < servername FDM >

  Connection of FINANCIAL MANAGEMENT:

  Name of the application...

  Name of the cluster...

  Field...

  Connect status... No open connection

  * Start the journal entry for the Runtime Error FDM [2013-10-16 07:41:57] *.

  -------------------------------------------------------------

  ERROR:

  Code............................................. 10054

  Description... Adapter function [fConnect] failed.

  Process... clsBlockProcessor.DimensionList

  The component... upsWBlockProcessorDM

  Version.......................................... 1112

  Thread........................................... 80304

  IDENTIFICATION:

  User............................................. admin

  ... Computer name < servername FDM >

  Name of the application... < name of application of FDM >

  Client App....................................... WebClient

  CONNECTION:

  Provider......................................... SQLOLEDB

  Server data... < database server name >

  Name of database < database name >

  Trust connect... Fake

  Connect status... Open connection

  GLOBALS:

  Location......................................... Sample

  Location ID... 748

  Location Seg... 2

  Category......................................... WLCat

  ID of the category... 12

  Period........................................... Oct - 2013

  Period ID........................................ 10/31/2013

  POV Local........................................ Fake

  Language......................................... 1033

  User Level....................................... 1

  All Partitions... True

  Is Auditor....................................... Fake

  * Start the journal entry for the Runtime Error FDM [2013-10-16 07:41:58] *.

  -------------------------------------------------------------

  ERROR:

  Code...-2146818234

  Description... Adapter function [fConnect] failed.

  Procedure........................................ ObjScriptReturnMarshaler.GetDimensionList

  Any help will be much appreciated.

  Thank you all for your help...

  It was a problem with the Machine profile configuration, where I had updated the username and password and it had to remain a Virgin.

  Keep the username blank password in the configuration of the machine profile has solved the problem.