More effective than a virus - KB930494 MS update ends with true Msg that Windows cannot now work correctly

Similar Questions

• Could not start the automatic updates. Get an error that Windows cannot check the updates, D0000034 after the failure of the Java updates

  OP: Action Center... PC problem: 1 important message

  After the failure of the attempt to install the JAVA update, I received this message from Action Center... Windows cannot check the updates. So I was taken to the dialog box and retried to check the updates of windows fails again with the code D0000034. Also did a system restore to the place before the installation of JAVA update attempt, but was no help. Can you help me?

  Hello Irfan,

  Thanks again for your response. Since your last I discovered through my system status (Control Panel), I wrote that my product ID and the Windows 7 activation status not available. So I followed instuctions to help and microsoft support to activate.  Yet once, I got the error code D0000034 as before with the problem of update. However, I was given the opportunity to phone, but received no phone #. I bought the DVD of Windows 7 and installed on the PC that was custom built for me.  On the site Web microsoft help and support, I was asked for the product ID, which according to them is a # 20 numbers.  Not the only one, I have is the product key which is one 25-alpha-numeric.  I tried to enter only and does not pass.  This is why I say that I can pay for help since I did not ' have the product ID.  Maybe it isn't your area of expertise, Irfan, but I was hoping... I re - install windows on last April when I got in trouble and probably did not re - activate? What do you think?  If you can get back on track, I would be very grateful and thank you once again to be a big help!

  wandrinstar

  Please ignore above request. I have since re-activated Windows and the problem was solved with technical assistance telephone and thank you again for your help, Irfan. Also thanks to all the people answering the phone at microsoft. The experience I had was really a pleasure. I wasn't expecting such an attitude courteous and professional.

  Keep up the good work,

  wandrinstar

• Lightroom showing constantly "unresponsive" and very slow since the last update. With the help of Windows 10. Extremely slow import!

  Lightroom showing constantly "unresponsive" and very slow since the last update. With the help of Windows 10. Extremely slow import!

  Hi Dear

  Please see this thread windows Lightroom CC 10 'unresponsive' number.

  Let us know if this helps

  ~ Assani

• Is to select a view that is more effective than the selection of multiple tables

  Hi here is the problem
  
  Lets say I created a view of 2 tables (person and information). both have an ID column
  

  create view table_view (age,name,status,id) as
  select a.age, a.name, b.status, b.id
  from person a, info.b
  where a.id=b.id

  If I want to select a range of values of these 2 tables including the following queries would be more effective.
  

  select a.age, a.name, b.status, b.id
  from person a, info.b
  where a.id=b.id
  and a.id <1000

  select age, name, status, id
  from table_view
  where  id <1000

  No, this is not true.

  A view is just a request. As any issue, you must run from the SQLPlus command line or any client application. The only difference is that the text of the query is saved in the database so that you do not have to re - enter type this in your query.

  Once the request is submitted the optimizer doesn't bother if it comes from a view or a user by entering the text of the entire query again on the SQLPlus command line.

  See "Mechanics views" to http://download.oracle.com/docs/cd/B19306_01/server.102/b14220/schema.htm#sthref804

  Published by: Hemant K grapple on November 3, 2008 14:40

• update fails with the ccr 800b0100 windows 2008 cluster

  Hello world!!! I hope you stay warm...

  I have a windows 2008 sp1 64-bit server that is running Exchange 2007 sp1 on a passive node of a CCR cluster... There are 2 groups in our org, all other servers update very well... windows firewall is disabled...

  I had one "update failed 800 b 0100" run windows update to KB969947 (which is successfully installed on all machines)...

  followed by all scenarios http://support.microsoft.com/kb/947366 ... even uninstalled my Symantec Mail Security 6 on this node... always the update fails...

  Let me know if you need more information...

  Here is the output of the system update tool...

  =================================
  Preparation of control system was updated.
  Binary version 6.0.6002.22202
  Package Version 6.0
  2010-01-14 08:07

  Checking Windows Service Packages

  Checking of manifests package and catalogs

  Checking package Watchlist

  Watchlist checking

  Checking packages
  (f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_for_KB969947_server_0~31bf3856ad364e35~amd64~~6.0.1.0.mum
  (f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_for_KB969947_server~31bf3856ad364e35~amd64~~6.0.1.0.mum
  (f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_for_KB969947~31bf3856ad364e35~amd64~~6.0.1.0.mum

  Control components store

  Summary:
  Seconds executed: 391
  Found 3 errors
  CBS MUM lack count: 3

  Unavailable repair files:
  servicing\packages\Package_for_KB969947_server_0~31bf3856ad364e35~AMD64~~6.0.1.0.mum
  servicing\packages\Package_for_KB969947_server~31bf3856ad364e35~AMD64~~6.0.1.0.mum
  servicing\packages\Package_for_KB969947~31bf3856ad364e35~AMD64~~6.0.1.0.mum
  servicing\packages\Package_for_KB969947_server_0~31bf3856ad364e35~AMD64~~6.0.1.0.cat
  servicing\packages\Package_for_KB969947_server~31bf3856ad364e35~AMD64~~6.0.1.0.cat
  servicing\packages\Package_for_KB969947~31bf3856ad364e35~AMD64~~6.0.1.0.cat

  Customer experience report downloaded successfully.  Thank you for your participation.  For more information, see the Microsoft Customer Experience Improvement Program on the Microsoft web site.

  FOR INFO:

  
  Frequently asked questions about the vulnerability of the Win32k - CVE-2009-2513 insufficient data Validation

  What systems are primarily exposed to this vulnerability?

  Workstations and servers terminal Server is mainly threatened. Servers could be at risk if administrators allow users to connect to servers and to run programs. However, best practices discourage you to allow this.
  
  Source: http://www.microsoft.com/technet/security/bulletin/MS09-065.mspx ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• When I run update Advisor it tells me that Windows 8 is not available for download online in my area?

  When I run the Upgrade Advisor, it tells me that Windows 8 is not available for download online in my area - why is this?

  Original title: upgrade to Windows XP

  Windows 8 or 8.1, is not a free update, it is not yet extensible through

  Windows xp, they are'nt compatible. A clean install is required. In addition,

  BONES need a lot more material PC to run, try this link for

  material.

  http://Windows.Microsoft.com/en-us/Windows-8/what-is-PAE-NX-SSE2

• Windows Update fails with Error 0x80072F76 on Windows 2003 server number

  I try to run windows update on my windows 2003 server. The update fails with number 0x80072F76 Errow. The Windows Firewall/Internet service Connection Sharing (ICS) is stopped and the security settings on IE is set by default. IE version is 8. The Windows Update screen is also not displayed correctly.

  You talk about servers, you use WSUS?

  Forum specific support by WSUS:
  http://social.technet.Microsoft.com/forums/en-us/winserverwsus/threads

• Updating Microsoft SQL Server 2005 that kb2463332 cannot be installed with Code D59

  I fought it for about 2 years or more. I can't find anything specific to this message (D59) error. My computer has not been good for long time and I think this error and no being is not able to update has a lot to do with it. I am not illiterate, but do not understand computer Lingo. If you have the answer, tell me in simple terms. I looked 28 possible causes and none of them seem familiar and the codes aren't 'D59. Any help here?

  Hello

  The question you posted would be better suited in the MSDN Forums. I would recommend posting your query in the MSDN Forums:

  http://social.msdn.Microsoft.com/forums/en/category/SQLServer

• Qosmio X 870-Blue-Ray driver update ends with the error message

  I recently received a message from Tempro for updating my Blue-Ray disk driver. Downloaded, extracted and installed. Error message:

  ....................................... Fix Project Setup Wizard

  ... "The build version of the source is not build target.

  Installation was not completed. At each new start (re-boot"I am again asked to install the new version of the wheat - Ray Disc driver.

  D:\nerladdat\Toshiba\BlueRay\Nerladdaat fran hemsidan\bluraydp-20130117155646

  extracted file is: TC30526100B.exe

  I use a Qosmio X 870-11 G 5C370203Q serial No.

  Grateful for the help to solve them.

  Goran

  What version of Toshiba Blu - ray disc player is installed on your laptop?

  Take a look at this thread
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=71240

  * MasterG wrote: *.
  + The error message appears because the Toshiba Blu - ray disc player is already updated. +
  + Generally after the update, the version of Toshiba Blu - ray disc player should be * 1.0.3.196 * +.

  + Before the update, my BD from Toshiba player was 1.0.0.929. After the update, I've got v1.0.3.196 +.

• Why are told that windows cannot check the updates

  Cannot download the update

  victoryflower,
  Please post with the information requested here: what to post in the Windows Update forum
  Start with these troubleshooting steps and post returns with the requested info and arises from the troubleshooting.

  Clean boot your PC, and then run Windows Update.

  Reset the Windows Update components

  Perform operations of KB883825

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot connect to internet after Windows update. With the help of windows 7 on a brand new computer

  Just got a new laptop last week... The internet worked right out of the box... Now last night I let windows do a big update, and now my internet does not work...  It says something about "connects to the DNS servers.

  So I did a system restore to an earlier time, and the internet works fine...

  which ____ should I do?

  Hi 31aboy,
   
  Welcome to the Microsoft Answers community.
   
  Try to install the update to windows in clean boot mode.

  To enter the mode of clean boot on your computer, follow these steps.
  1. click on start, type msconfig in the search box and press ENTER.
   
  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
   
  2. in the general tab, click Selective startup.
  3. under Selective startup, clear the check box load startup items.
  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
  5. click on OK.
  6. When you are prompted, click on restart.
  7. now run windows update.

  http://support.microsoft.com/kb/331796 . In addition, see the section on how to restore your computer to a Normal startup mode.
   
  If you are facing the same problem even after installing the update in clean boot mode, then check the update in windows update history and send me the update name.
   
  Steps to view the windows update history:
   
  1. open Windows Update by clicking the Start button, all programs and then click Windows Update.
  2. in the left pane, click view update history.
   
  Hope this information is useful.
  Let me know if it worked.
   
  Thank you, and in what concerns:
  Umesh P - Microsoft Support
  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• I have literally over a hundred Microsoft Updates-ITMU with KB numbers that will come back for 2 or 3 years.do I still need this in my laptop? I'm not computer... Thank you very much

  I have over a hundred updates to update on my computer with numbers beginning with k...

  all this can I?.
  I'm not at all computer literate
  ... Thanks a lot for an answer?

  I have over a hundred updates to update on my computer with numbers beginning with k...

  all this can I?.

  I'm not at all computer literate

  ... Thanks a lot for an answer?

  If you mean entries in Control Panel > add or remove programs, then no, do not uninstall these updates.

  If you mean files with names like $NTUninstalKBxxxxxx$, see http://windowsxp.mvps.org/Hotfix_backup.htm

• My computer says that Windows cannot check the updates. There is also a known error 802440F error message. What is this, and how can I solve this problem?

  Windows Update says that an error occurred when checking for updates. This error is called error 8024402F. I don't know what it is or how to fix it. Help!

  0X8024402F - WU_E_PT_ECP_SUCCEEDED_WITH_ERRORS - treatment of external cabs completed with errors.

  It is a Windows Update error, which indicates some sort of connectivity problem.

  Have you read: (836941) - provides a resolution of problems with a server file, a firewall or proxy HOST settings that block the Windows Update Web site.

  http://support.Microsoft.com/kb/836941>

  or

  Choose a two o...

  http://answers.Microsoft.com/en-us/search/search?searchterm=John+798&CurrentScope.ForumName=Windows&CurrentScope.filter=Windows_7-windows_update&askingquestion=false>

  UTC/GMT is 04:05 Saturday, December 29, 2012

• securrity update ends with a code failiur 80070057

  whenever I update of widnow I get code 80070057 faillier

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Since the update to 38.4.0 that t-Bird stops working, it freezes. RESOLVED itself. unknown cause

  What is happening almost everytime I try to use T-Bird. I get a message 'No response' and have to close the program.
  Windows 7 using Avast.

  Wayne, I had the problem all day yesterday and closed the computer normally at the end of the day. Today, T-Bird was glitch free work.
  No changes have been made that normal startup upward. I'm sorry, I didn't mean your suggestion & I thank you for being part of the community.