more than 8600 doesn't turn on!

We have recently bought a HP officejet pro more than 8600 and managed to make it work. After that, we had a few problems with the connection of computers to the printer for printing - the printer is not found. Now after switching off, it does not turn. It shows the HP logo and does nothing no matter how long wait for us. It had been extinguished before without encountering this problem and not the touch screen or the power button had no effect. After you have disconnected and reconnected the printer, the problem continues to persist.
 
Just before this happened, it seemed to be completely disconnected from the network in our House, and the network on the Printer Wizard program not could find wireless access to all points. That's why I decided to restart the printer.
 
It has not been damaged in any way and is plugged into a surge protector so there is no possibility of damage caused by the tides.
Any help would be appreciated! We spent a lot of money on that and are really disappointed that we get this problem.

Thanks a lot for the update!

Tags: HP Printers

Similar Questions

  • 8600 CN579A more: more than 8600 does not work with Windows 10

    HP has plans to support the more than 8600 on Windows 10, or they will offer a discount on a replacement printer?

    Yes, it works very well.

  • On the start with progress bar page, after that it becomes a little more than half, the computer turns off.

    MY MacBook Pro is frozen and I had to turn off get out of the frozen page and when I pressed the button to turn it on it makes the departure noise and then the progress bar lights. When it becomes a little to Midway, the screen goes black and the computer turns off.

    The progress bar that starts from the left end appears when your startup disk is too damaged to mount. The illustrious progress is the functioning of the equivalent of disk utility (ERD). He is never more than half before taking a decision.

    If your drive CAN be mounted, start-up continues normally.

    If your drive cannot be mounted, your Mac stops, because there is nothing productive that it can do.

    If your Mac is trying to start and crashes, which can produce always different results, but that doesn't seem to be the case here.

    I recommend that you start in recovery and run utility disk (ERD) until it comes clean or is hopelessly.

  • OfficeJet Pro 8600, more than 8600: Airprint loses connection

    After turning on the printer, I can use airprint on Mac or iPad for 1 minute about. Then the connection is lost.

    Printer is NOT in the list of Apple airprint more.

    HP working on a solution, or I change something?

    Hey @phterhorst, welcome to the Forums of HP!

    I'd love to help you with your JO 8600. I understand your description that you are only able to print using the AirPrint feature for about a minute then the printer is no longer available. It seems to me like a problem with the network connection between the router and the printer. Please first take a look at the document following and well it works sometimes and you can't see a message as mentioned here, the steps can help: what to do if you see a "No AirPrint Printers Found" message on my Apple device? What happens if I experience problems when I try to use AirPrint?

    If the problem persists, in order to isolate the root cause of the problem is the router or not, I recommend allowing the direct wireless and put your devices on the network printer. This isn't my proposed solution, just a test to see if the devices maintain a connection when we eliminate the router. Here is some information on Direct wireless and how to connect with this method.

    Let me know how it goes. If the original document of AirPrint helps you solve the problem, please be sure to mark your post as solved by clicking on the accept button Solution below.

    See you soon!

  • Pro more than 8600 copies and put the output in reverse order

    8600 pro more

    When copying this outputs printer copies back to order before.  Is it the way it is supposed to work?

    Hello columbia530

    It is because the printer copies since the ADF Document (CAD) using first of all in the first page of the document. If the top of the page (usually the first page unless the document is already reversed) is copied everything first and thus ends up on the bottom once all pages are copied.

    However, the series Officejet Pro 8600 has the ability to scan all the pages and then print from the last page. The option is called 'Collate' and you should find it in the copy settings. Just turn it on and start the copy.

  • Documents scanned on more than 8600 are recorded in the form of very large pdf files

    HP Officejet pro 8600 more all-in-one.

    OS Vista Home Premium 32 bit

    . The PDF files created by scanner are 10 times larger than files created by my previous all-in-one to the same DPI setting.

    How can we reduce the size of the file.

    Open the 8600 Officejet Analyzer and select the Advanced Settings.

     


    • Select from the file tab, then look where it says file size / quality and move the slider to your needs.

    Then click on the OK button to go back to windows to scan and analyze your PDF files.

    * Click the stars KUDOS to say thanks

    * also click on the Solution button if your question is answered.

  • HP Officejet don't align more than 8600

    My Officejet Pro 8600 more don't lixation the print head.  I chose the option align several times, reset the printer by unplugging the power cord and even reset to the factory settings.  I'm at my wit's end.  This is getting ridiculous.  Any help would be greatly appreciated

    Hello Kiwikobi,

    Welcome to the HP Forums!

    I understand that your Officejet 8600 will not align the print head. I can understand how frustrating this situation is. I'm here to offer a few suggestions to try to solve this problem. Please follow these steps:

    (1) make sure that the printer is plugged into a live wall, not a surge protector

    (2) remove all your printer ink cartridges and close the door

    (3) remove the power cord at the back of the printer (make no press the power button)

    4 wait 60 seconds or more, then plug the power cord into the printer

    (5) wait for the printer to turn completely, and then install the ink cartridges

    (6) try to print an alignment page

    "If these steps do not resolve your problem, please follow this entire document from HP to a ' alignment failed ' Error Message appears on the all-in-one.

    Please post your results, I'll be looking forward to hear from you.

  • more than 8600 double sided printing

    How can I turn off the double-sided printing 8600 more.  There is NO setting for printing.  I've reloaded the software on my Mac and still no settings anywhere.

    Hello
    Please follow the steps below to disable grubbing double-sided:

    The application used to print, click the file menu and select print. The print window is displayed.
    NOTE: The print window might be minimized. Click the blue triangle next to the name of the printer or on the button view details to see all the available parameters.

    In the print window expanded you will find next to Copies the checkbox for duplex. Uncheck the box.
    NOTE: If the check box does not appear in the specific application print dialog box, skip this step.

    Click on the area of selection below, listed as the name of the program (e.g. TextEdit)
    Will appear as Copies & Pages within Microsoft Office applications.

    Select layout from the drop-down.

    Set the duplex as Off.

    You can save the settings for later use by clicking preset > save current settings as preset. By default, a used preset will remain until another preset will be used.

    Kind regards
    Shlomi

  • Scan to e-mail - by default - officejet pro more than 8600

    How can I remove the default email that is automatically inserted into the line send when I initiate a fax in Control Panel?  It is meaningless, it is filled automatically.  Otherwise, I have to go to AddressBook and uncheck and then check the right pair.  Thank you!

    Who did the trick.  Thanks for your help!

    Come to think of it, I like the idea to be copied on all outgoing emails.  BUT I don't want to get a copy of the attachment.  Would be nice to have a feature allowing the administrator to copy without getting the attachment.  But that becomes very picky.

    The Officejet pro 8600 more is the best printer I've owned so far, especially considering the price.

  • ink replacement Office pro more than 8600

    I have a 8600 OfficejetPro more.  I want to only print in B & W.  All cartridges were exhausted, but I replaced the black ink only.  It won't print either, even in any B & W.

    Must all color cartridges be replaced, even if I do not want to use them?

    for this model, Yes. The cartridges in this model, are just ink tanks, and missing ink will dry and probably damage the print head.

  • OfficeJet pro more than 8600: eprintcenter to hpconnected account transfer

    I can access is no longer the eprintcenter abandoned site, but I can not sighing in or register a new account with my previous email address (System error).

    The same problem occurs for two of my previous two adreesses to e-mail registered.

    Created a new account with another email third successfully, tried to change the email back to the former, but without success. for some reason any hpconnected I cannot use previous used e-mail addresses.

    How can I keep my old e-mail used in eprintcenter also in hpconnected?

    Hi @GeorgiosT,

    Thanks for joining the Forums of HP Support for a solution to your problem of account creation.

    I understand that you have HP Officejet Pro 8600 more e-all-in-one printer and you have problems by creating an HP account connected with e-mail addresses previously used and recorded. I would like to help with that.

    I've seen this before.

    Now that you have an HP account connected, you can replace the email you with the one that you have already used the eprint service, but you will need to contact HP Cloud Services for a ticket can be up to release the e-mail address of the HP connected and accounts of Snapfish.

    It usually takes a few days that the request should be addressed, but once it's done, you would be able to replace ithat email with what you have created on behalf of HP connected.

    HP Cloud Services also lets see if a previously used hpeprint.com e-mail address may be used.

    What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:

    Step 1. Open the link: www.hp.com/contacthp/

    Step 2. Enter the product number or select Auto detection

    Step 3. Scroll up to "still need help? Fill out the form to select your contact options.

    Step 4. Scroll down and click on: contact HP options - click Get phone number

    File number and phone number are displayed.

    If this helps you find a solution please click the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

    Thank you!

  • HP laserjet more than 8600: can I get OCR software for a more 8600 with a mac?

    can I get OCR software for a more 8600 with a mac?

    If so, how?

    Hello

    OCR software, I included in the HP scanning software.

    In the Applications folder, find the Hewlett-Packard folder and launch the HP scanning software.

    After the analysis, you can select RTF or TXT files that save by processing OCR scanning.

    If you do not have the HP scanning software installed, remember to install the following software by checking the option of scanning HP during the installation:

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=OJ-125213-3&cc=us&DLC=en&LC=en&OS=4159&product=4323648&sw_lang=

    Kind regards

    Shlomi

  • Management software for more than 8600

    Installed the full version of the drivers for 8600 more in windows 7 64 bit without error. However cannot find the software on my PC to manage the printer. You are looking for something similar to the center of the solution. No icon on the desktop will not created during installation. Is there anything extra I have to do?

    Basically, this prinmter have solution Center

    Please click on start-> all programs-> do scroll down and look for a yellow folder with the name HP-> HP open and then Loof for a folder with the name HP officejet 8600-> open this folder, and then click HP Officejet 8600 and you will see an option printer and your ink etc as you can see in the center of solution and this version of the 8600 is called Solution Center lite...

  • HP Officejet Pro more than 8600: HP Officejet Pro 8600 more black vertical line when copy or scan with automatic feeding

    HP Officejet Pro 8600 more black vertical line when copying or scanning using auto flow only.  It works very well on the flat.

    It is now resolved.  It seems that there is a strip of glass that is used for the automatic copy of power and research.  The glass has a note on it that I cleaned which solved my problem of vertical line.

  • HP Officejet Pro 8600 Plus: HP Officejet Pro more than 8600 mysteriously went offline today

    Hi all.  Hoping that someone out there has experienced and solved the problem, I will describe.  We have a desktop computer with Windows XP Dell, a Dell laptop with Windows 8 and several iPhone 4.  We also have a quantum Verizon FIOS router, which we installed a week ago.  (We were able to print to the printer HP of all of our devices, once the new router has been installed).  Until today, all of our devices connected to the router and our range of HP printers.  Today, we cannot print anything for the HP printer.  We uninstalled and reinstalled the printer software.  We have followed all the steps HP print and Scan doctor.  We have unplugged the printer and the router and plugged them both back.  We rebooted all electronic devices.  We ran the network Test on the printer wireless and did get the message 'no problem found.  Congratulations on the success of your wireless printer setup. "All the results of the test came as a 'PASS '.  Still no luck.  The printer is 'offline' and none of our electronic devices even recognize it.  Any help would be welcome!

    Welcome to the HP community @FedupinVA,

    I saw your post on your connection on your HP Officejet Pro 8600 more problems, and I would help him.

    Try the steps in the link below, it offers the solutions to this problem. Please try all the steps and let me know the results, as well as the problems or the error codes that you met.

    HP Officejet Pro 251dw, 276dw and 8600 Printer Series - printer keeps no connection Wi - Fi

    I hope this helps.

    If this help will testify of my answer by hitting the thumbs to the top slot

    Click on the button "Accept as Solution" if I helped you reach a solution.

Maybe you are looking for

  • No connections available hp pavilion laptop

    Hi all.I bought my HP Pavilion New Notebook today and not his game well except for the internet to which it connects. Despite my phone pick up at least 10, including 2 in my own home, there are no networks.Flight mode is definitely off, and from what

  • Satellite T110-107 - where to download original backup image?

    Hello Is there anywhere to download the backup software provided with the computer on partition "D"?I have accidentally scratched and necessary replacement, if they are available. Thank you

  • Tecra A9 + Windows Vista SP1 - BSOD on restart

    Hello When the PC is restarted, I get a BSOD with the following information. PAGE_fAULT_IN_NONPAGED_AREA. Technical info. Stop :-0 x 00000050 (0X817DA000, 0x00000000, 0X8278D766, 0 x 0000 00000)iaNvStor.sys - ADDRESS 8278 766 BASE to 82773000, time S

  • My compaq won't work with a cisco router

    Hi people, I have a presario CQ50-110US notebook. When I try to use an already established wireless home network, I can join the network, but it won't allow me to get on the internet. Screen sharing network shows that I'm on the network, but there is

  • Meet me with password - 8,6 CUCM

    Hello voice team, I´d as configure meet me with passwords, when people enter the number of the Conference have to enter a password. Thank you Thiago