most needed the mouse buttons in labview

Similar Questions

• Is it possible to connect my Application ' Stop' button with the "Run" button of LabVIEW?

  Problem - one of my clients recently tested my new LabVIEW application and asked how the arrested LabVIEW application can be restarted without clicking on the "Run" (right arrow) button.

  Is possible solution - possible to connect my Application ' Stop' button with the "Run" button of LabVIEW?

  Thank you!

  Barry

  The big problem is in your Acquistion to stop audio event. You run the LabVIEW stop sign which is the equivalent of hitting the Cancel button in the toolbar.  (See contextual help on that).  You can stop the acquisition, but you don't want to stop your LabVIEW program.  You need this case in the event your computer to transition state in a sleep mode when you do not make any purchase.  Then hit the purchase button to start again transitions the machine state in the acquisition.

  In your case of program output, you want really to leave LabVIEW it.  You want to run and stop commands like closing the com port and one of these activeX references.  Then allow it to stop the while loop.  Turn the LabVIEW out outside the loop so that once everything is cleaned, your application may close.  You probably want to wrap this command in a case structure so that if you are in the execution environment, it leaves your application.  But if you are in the development environment, you don't want to cause your LabVIEW environment stop.  Another thing is that right now, you actually have a race condition in the Exit event.  The com port will close first or LabVIEW will come out.  There is no defined order of execution.

  Alternatively, you can have an event to close panel? in this way, you haven't accidentally short circuit all your program by pressing the X key.  You want to capture this event, discard it.  And if you want to not actually closed, did trigger the Exit Program button so that you can gracefully shutdown.

• When I choose my quick selection tool, I click and drag the first time, and he adds (my selection). BUT if I let go of the mouse button and try to select more it goes to Negative (-) and removes all selections I made and won't allow me not one

  When I choose my quick selection tool, I click and drag the first time, and he adds (my selection). BUT if I let go the mouse button and try to select it goes to Negative (-) and removes all the selections I made and not will not let me add again. I never had this problem before, you usually need to hold down the Alt (or Option MAC) to subtract from selections. No one knows what happened or how to fix this problem, maybe a setting I accidentally hit? Thanks for your suggestions! :))

  Look at the options of quick selection - particularly the four icons on the left.

• Updating of increment (ATTR_INCR_VALUE) a control digital while holding the mouse button

  Hallo,

  It is a problem with a digital command.

  I have a control that accepts a broad range of values: 0.01 to 60000.

  What I want to do is changing its incremental value according to the current range.

  So, if the value of the control is 2000.6000 to change it to 1000 stage, if it is less than 2000 but more than 200 - at the stage of 100 etc.

  The following code works if I change the value of the control with SIMPLE mouse clicks. But if I just press the left mouse button and hold it down, it does not work!

  Debugging of the shows, he correctly process events and passes to the attribute to (both) control. But change of ATTR_INCR_VALUE seems to have no influence until I release the mouse button.

  ------------------------------------

  int CVICALLBACK SetTint (int command face, int, int event, void * callbackData, int eventData1, int eventData2)
  {
  float dIncValue = 10.0, dIncValue_temp;

  switch (event)
  {
  case EVENT_VAL_CHANGED:
  GetCtrlVal (hMainPanel, MAINP_INTTIME, &fTint);)
  If (fTint > 2000,0) dIncValue = 1000.0;
  If ((fTint<=2000.0)&&(fTint>100.0)) dIncValue = 100.0;
  If ((fTint<=200.0)&&(fTint>20.0)) dIncValue = 10.0;
  If ((fTint<=20.0)&&(fTint>= 2.0)) dIncValue = 1.0;
  If ((fTint<2.0)&&(fTint>0.2)) dIncValue = 0.1;
  If (fTint<=0.2) dincvalue="">

  SetCtrlAttribute (hMainPanel, MAINP_INTTIME, ATTR_INCR_VALUE, dIncValue);
  break...

  -------------------------------------

  Addition of events such as

  case EVENT_COMMIT:
  case EVENT_LEFT_CLICK:
  case EVENT_VAL_CHANGED:
  GetCtrlVal (hMainPanel, MAINP_INTTIME, &fTint);...)

  does not help.

  Swallowing of events after the setting of the attribute as

  SetCtrlAttribute (hMainPanel, MAINP_INTTIME, ATTR_INCR_VALUE, dIncValue);
  Return 1;

  does not help.

  Things like-

  ProcessDrawEvents();
  ProcessSystemEvents();

  does not help also.

  Any other suggestions? :/

  Hello

  Joint an example very smal how you can achieve this

  Best regards, Fabian

• Detecting the mouse button

  Hello

  I'm trying to detect whether the mouse button is pressed. Now I managed to detect status of mouse using the Structure of the event, but my code inside the loop is then suspended. I would like to run the code inside while loop and to have a Boolean flag saying if the mouse button is pressed or not. The code inside so that the loop should run all the time.

  I joined vi described above.

  Hello

  You can use the function time out.

  ex attached below

• Impossible to use the Central ball on the mouse button to change the distance in plan spot view in FS9

  Fs9 views

  I'm unable to use the Central ball on the mouse button to change the distance in plan spot view in FS9. I've never had this problem before! can anyone help?

  Hello

  1. what operating system do you use?

  2 did you change on your computer?

  I suggest you to follow the links and check out them.

  How to solve the pointer display problems mouse in Microsoft games

  http://support.Microsoft.com/kb/309703

  I also suggest you check if the middle mouse button works with other applications

• No KeyPress triggered if the mouse button is held on the control

  Hi all

  I am trying to catch the outfit/auto repeating keyboard inputs at the same time I'm clicking on a slide ring switch, to change the direction of the slide of entry as a Shift key.  (actually, I would like to use the SHIFT key, but apparently not raise events keypress at any time, so I resorted to letter keys).  I check for the KeyPress in the recall of Panel, it fires well if no mouse btns are in a hurry, or if they are pressed on indicator or decorations on the Panel.  But as soon as I click on any control with an active entry, all keypress events stop until the mouse button is up, then keypress starts shooting again, completely defeat the purpose of simultaneous inputs.  I put the test code in the callback of slide control, and it does not receive the keypress events or if the mouse button is pressed, if it does if it has focus, but the mouse button is up.

  Any ideas?  I'm still using ver 6.0 if it makes a difference, try to get it to improve myself to 8.0 but try to do something on the old version, while I wait.

  Ken

  I didn't understand exactly what Ken was referring to. Let's try another approach: a reminder of command triggers a LEFT_CLICK or COMMIT event even it the SHIFT key is pressed, to Ken can intercept the desired event and then test the State of the keyboard, in this way:

  If (event == EVENT_LEFT_CLICK) {}
  GetGlobalMouseState (NULL, NULL, NULL, NULL, NULL, &keys);)
  If (keys & VAL_SHIFT_MODIFIER) {}
  MessagePopup ('Event', "shift key is pressed.");

  }
  }

• How to safely clean the mouse buttons? (Acer Aspire V3)

  My mother spilled coffee on his laptop Aspire V3, and now the mouse buttons do not work.  The touchscreen always moves the cursor, but the buttons do not respond.  How can I fix/clean these buttons safely?

  Only by removing the entire unit, until you are able to see if there are still coffee in the notebook. You can be sure that everything is dry now. It was enough to break something, especially a bad sign.

• Can not change the mouse buttons

  I tried new mouse on my computer, and now my computer will not recognize the original mouse as a Microsoft mouse. The keyboard and the mouse still work, but I can't change the buttons of the mouse for left-handed people my family before I had no problem doing this. The original mouse is a Sony Vaio device that works wirelessly with a keyboard via a USB input device. Any ideas?

  See if that will help:
  The problems with the mouse button or scroll the parameters
  http://support.Microsoft.com/kb/303091

• Reverse the mouse buttons on a laptop running Vista Ultimate

  I use Vista Ultimate on a laptop. I want to reverse the mouse buttons.  When I check the control panel to reverse the buttons on the touch pad works like a 'right click '.  How can I reverse the buttons without messing up the keys.

  I use Vista Ultimate on a laptop. I want to reverse the mouse buttons.  When I check the control panel to reverse the buttons on the touch pad works like a 'right click '.  How can I reverse the buttons without messing up the keys.

  I want to assure you that I understand what you want...
  You want with your mouse, click LEFT to open and do a RIGHT click to select?
  If so, right-click on a free space of the desktop > customize > mouse pointers > now here is the tricky part. I use a Dell computer. If you do not have a Dell, I'm not sure that you can follow from here. > you have a tab button? If so, click on it > under button Configuration, select "Switch primary and secondary buttons" > apply/OK
  See screenshot...
  

  t-4-2

• When you use the pen tool when I click and create an anchor point and release the mouse button the pen tool emerges from the anchor and allow me to go and select a new anchor point. The right pen tool keeps adding lines that I move the mouse.

  When you use the pen tool when I click and create an anchor point and release the mouse button the pen tool emerges from the anchor and allow me to go and select a new anchor point. The right pen tool keeps adding lines that I move the mouse.  How can I get the pen tool to release the anchor

  Try this.go in the menus. Select cc illustrator > preferences > display selection & anchor > then make sure the box "activate the rubber band for" the pen tool is not selected. Then press OK. It should work.

• Mac Illustrator CC 2015 bug: option-a path to reproduce moving often does not release the path when the mouse button is released

  Mac Illustrator CC 2015 bug: option-a path to reproduce moving often does not release the path when the mouse button is released

  Delete my preferences file and restart the machine seem to have solved that problem.

• How to untie the mouse button (mouse4 or 5)? I don't want it works as a ' back ' button.

  I have my mouse thumb buttons. Most people call them mouse4 and mouse5. Currently, one of them works as a 'back' button in the browser. I use this button for something else in another program, and I want to disable this feature in firefox.

  Please advise me on how to disable this feature in firefox. Would be nice if you can customize these mouse shortcuts.

  Unfortunately, driver mouse tip generates keyboard shortcuts for Firefox for these extra buttons; Actually, Firefox does not handle more than 3 buttons.

  In case the mouse driver sends the BACKSPACE key, you can set Firefox to ignore this.

  (1) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.

  (2) in the search above the list box, type or paste back and make a pause so that the list is filtered

  (2) in the search box that appears above the list, type or paste the back and make a break while the list is filtered

  (3) double-click the browser.backspace_action preference and enter the desired value:

  • 0 = > return (default)
  • 1 = > previous page
  • 2 = > ignore (in fact, nothing other than 0 or 1 does nothing)

  OK to save the change. You are finished.

  Is it that help at all?

  Otherwise, is what?

• Whenever I have press and hold to my left click on the mouse button, it automatically highlights everything from this point to the top of the page

  Whenever I press and my left click without releasing, it atomically highlights everything from this point to the top of the page. Also, note if I'm now left click on the scroll bar, it goes back to the original location, even when I try to drag it upwards or downwards.

  Open internet Explorer and the problem does not occur there.

  Try Firefox Safe mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that disables certain parameters, disables most Add-ons (extensions and themes).

  If Firefox is open, you can restart Firefox Safe mode in the Help menu:

  • In Firefox 29,0 and above, click on the menu button

    

    click Help

    

    then select restart with disabled modules.

  • In previous versions of Firefox, click on the Firefox button in the upper left of the Firefox window and click help (or click on help in the Menu bar, if you do not have a Firefox button) and click on restart with disabled modules.

  If Firefox is not running, you can start Firefox in Mode safe mode as follows:

  • On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac: Hold the option key during the startup of Firefox.
  • On Linux: Exit Firefox, go to your Terminal and run firefox-safe-mode
    (you may need to specify the installation path of Firefox for example/usr/lib/firefox)

  When the Firefox Safe Mode window appears, select "start mode safe."

  

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. Please follow the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

• "the scroll of the mouse button does not work.

  I'm sorry. I don't know what to tell you more. I'm out of ideas.

  This is a pretty old post so I don't know if you'll see even this or not, but I thought I would just in case others have had this problem. I don't have a rock solid solution, but of course, I had to deal with this issue over the years several times. Usually with the mouse PS/2. I also had very difficult to find useful to question answers. It seems that there are many people who simply do not use the middle button as a shortcut for double click. I hate not having this double click the middle button.

  Finally, what works for me (years before), it's that I found a Logitech software that everything worked well with my PS/2 mouse 3 button. I think it was like Version 9.03, and no less.

  Now, I'm having the same problem again with the USB mouse... drivers or lack of pilots. When you have the problem, if you look in your Dashboard under the software of your mouse, you will likely see that there is no option of three buttons available. There the scroll wheel and click lines how much you want to scroll to each tread of the wheel (or if you want to lock the scrollbar) but no third option button and that's the problem. You need to find a driver that has this option and you can get it to work with the mouse that you ever then your problem is solved. This is a Windows problem... nothing in the bios either.

  I'm sure that there is someone out there who has a better tham solution = n me but at least if someone knows this problem... you are not alone, and now you know... it's the fault of Windows!