most of the security

Similar Questions

• I use to have a pc game on my computer, I deleted and installed most of the security, but it show in pc-Safari Security Center not essential to security. Win. XP

  Win.XP Pro. PPP

  Try this and see if it will remove the rest of the PC-Cillian

  http://eSupport.trendmicro.com/solution/en-us/1056455.aspx

  In fact, this old version might be what you need http://esupport.trendmicro.com/solution/en-us/1033129.aspx

  For more information on installing and using see Microsoft Security Essentials

  http://experts.Windows.com/w/experts_wiki/89.aspx

• Satellite M30 slow start, running slow & on most of the time HARD disk activity led

  The question above with my laptop. It is used to run faster than my desktop, but has altered performance. Running XP SP2 and Norton Internet Security and Norton System Works. No error shows when executing the Tests of Norton. Have reformatted the hard drive and reinstalled software but little difference.

  Laptop takes @5 minutes to start. Open Outlook takes 10 seconds. Drive light is on most of the time so I was wondering if the hard drive related.

  Any ideas?
  Thank you very much.

  Try the freeware like HD Tune or HDD Health programs.
  These applications provide some information on the State of the HARD drive.

• Safari, chrome time cannot access most of the sites on my MacBook Air

  All of a sudden since the morning of today I can access most of the sites except Google, Facebook, and LinkedIn. Safari and chrome have the same problem. I tried to empty cache, remove extensions, change dns 8.8.8.8 in Network preferences, but nothing seems to work. can someone please advice what to do.

  I have OS X Yosemite with Safari 9.0.2

  Thank you!

  You may have installed one or more variants of the malware "VSearch' ad-injection. Please backup all data, and then follow the instructions from Apple Support to remove it.

  If you have problems with these instructions, or if they do not work, see below.

  Malware is constantly evolving to work around defenses against it. This procedure works now, I know. It will not work in the future. Anyone finding this comment a couple of days or more after it was published should look for a more recent discussion, or start a new one.

  VSearch malware tries to hide by varying names of the files it installs. To remove it, you must first identify the naming model.

  1 triple - click on the line below on this page to select, then copy the text to the Clipboard by pressing Control-C key combination:

  /Library/LaunchDaemons

  In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

  A folder named "LaunchDaemons" can open. Search inside the two files with the names of these forms:

  com.something.daemon.plist

  com.something.Helper.plist

  com.something .net - preferences.plist

  com.something.Preferences.plist

  Here, something is a variable character string, that may be different in each VSearch infection. So far it has always been an alphanumeric string without punctuation signs, such as the 'cloud', 'point,' 'Highway', 'underwater', or 'trusteddownloads.' Sometimes, it's an empty string like 'e8dec5ae7fc75c28' instead of a Word. Sometimes, the string is "Apple", and then you must be particularly careful not to delete the wrong files, because many built-in OS X files have similar names.

  You may have more than one copy of the malware, with different values of something.

  There may be one or more files with the name of this form:

  com.somethingUpd.plist

  where something may be a different meaning empty string in other files. Yet once, there may be more than one file of this type, with different values of something.

  Here's a specific example of an infection VSearch:

  com.disbalance.daemon.plist

  com.disbalance.Helper.plist

  com.thunderbearerUpd.plist

  You will have files with similar names, but probably not identical to these.

  2. If you find such files, let the open LaunchDaemons folder and open the file following the same way:

  /Library/LaunchAgents

  In this case, there may be a file named

  com.something.agent.plist

  where the channel something is the same as before.

  If you feel confident that you have identified the above files, back up all data, and then drag the files - nothing - to the trash only. You may be prompted for administrator login password. Close the Finder Windows, and then restart the computer.

  Do not delete the folder 'LaunchAgents' or 'LaunchDaemons' or anything else inside either.

  3 reset the home page in each of your browsers, if it has been modified. In Safari, first load the desired home page, then select

  ▹ Safari preferences... ▹ General

  and click on

  Set on the current Page

  The malware is now permanently inactivated, as long as you reinstall it never. You can stop here if you want, or you can delete the other two components for completeness.

  4. This step is optional. Open this folder:

  /Library

  It may have subfolders that are named as follows

  something

  somethingUpd

  where something is one of the channels that you have seen before. Drag all these subfolders to the trash, and then close the window.

  Do not delete the folder "Library" or anything else inside.

  5. This step does not apply to the OS X 10.11 ("El Capitan") or later and it is optional if you are using an older version of Mac OS X.

  In this folder:

  /System/Library/Frameworks

  There may be an element named exactly

  v.Framework

  either a named item

  Something.Framework

  Again, something is the same string as before.

  This item is actually a file, although it has a different icon than usual. Drag it to the trash, and then close the window.

  Do not delete the folder "Frames" or anything else inside.

  6. If you do not find the files or you are not sure about the identification, after what you have found.

  If in doubt, or if you have no backups, change nothing at all.

  7. the penalty may have started when you have downloaded and run an application called "MPlayerX." It is the name of a legitimate free movie actor, but the name is also used fraudulently to distribute VSearch. If there is an element with that name in the Applications folder, delete it. I do not recommend to install the genuine "MPlayerX", because it is hosted on the rogue 'SourceForge' site and is bundled with other malware.

  This Trojan horse is often found on the illegal Web sites that traffic in content such as movies pirated. If you, or anyone else who uses the computer, visit these Web sites and follow the instructions to install the software, you can expect more of the same and worse, to follow. Never install software that you downloaded from a bittorrent, or which has been downloaded by someone else from an unknown source.

  In the aspect of security & confidentiality of system preferences, select the general tab. The marked anywhere radio button should not be selected. If this is the case, click the lock icon to unlock the settings, and then select an other keys. After that, do not ignore a warning that you are about to run or install an application from an unknown Director.

  Then, still in system preferences, open the pane of the App Store or software update and check the box marked

  Install the system data files and security updates (OS X 10.10 or later version)

  or

  Automatically download the updates (OS X 10.9 or earlier version)

  If it is not already done.

• Insert the floppy disk to update the security of Microsoft Works update.

  • O.K.  I get this message on the automatic updates failed.  I've never had Microsoft 9.  Why they continue to send me updates for something automatically that I don't have?  How to stop, as it is disturbing, especially since it deals with security.
  • I asked each help site I found.  I gave a run around.  Found a great online chat with Stella? but she lost and cannot find it again.

  Hi OKIEzb,

  1. What is the KB number update?
  2. You receive an error message and the failure of the update?
  3. You are able to install some other updates on the computer?

  I suggest you cross check if you have Microsoft works installed on the computer, open programs and features in Control Panel.

  Most of the manufacturer computer ship Microsoft works with computers.

  If find you works by Microsoft installed on your computer and you are able to install all other updates of Windows on the computer then I would suggest you contact technical support for Microsoft works.

  Microsoft œuvres

  http://www.Microsoft.com/products/works/support.mspx

   

  If you do not work for Microsoft installed on the computer, then I suggest that reset you the Windows Update components and check later if works update is offered again.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Indicates the security settings will not download. Have you tried to reduce

  My pc runs slowly.  I tried to download patches from the internet and even Microsoft.  Error message says that my security settings will not download.  Tried lowering settings but it does not work

  Dave

  Hi Dave,.

  ·         You use Internet Explorer? If so, what version are you using?

  ·         Are what patch you referring?

  ·         Did you do changes on the computer before the show?

  ·         Have you been able to download anything earlier?

  Follow these methods.

  Method 1: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Perform an optimization of the article Internet Explorer if you use Internet Explorer.

  How to optimize Internet Explorer

  http://support.Microsoft.com/kb/936213/ro

  Note: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

• External hard drive problems - we have most of the files to get a message "access denied."

  USB connected external hard drive was used with XP.  For a small period of time, we had to connect to a machine from W7.  Now that we are back to the XP machine, we have most of the files to get a message "access denied."  How we fix the problem.  The files are images, videos or music.

  Try this,

  Start in safe mode.
  Open your computer and right click on your external hard drive.
  Go to properties.
  Click Security.
  Click on Edit under a quote "to change permissions, click on change."
  Click on Add.
  Type in "everyone" in the white box.
  Then check in the box "total control".
  Press OK.

  This makes the hard drive usable by everyone (all users and different computers)

  I hope this helps.

• I can not install the "Security Update for Microsoft Silverlight (KB2636927) ' get the error code"656»»"

  I can not install the "Security Update for Microsoft Silverlight (KB2636927) ' get the error code"656»»"

  I would like to reinstall the version the most recent, but before to do that click on the "fixit for me" button on the bottom of the page to

  http://support.Microsoft.com/kb/2608523

  Latest version

  http://www.Microsoft.com/getSilverlight/get-started/install/default.aspx

• Difficulties to download itunes, make mistake, the security administrator does not allow this download

  I tried to download itunes and I get a message that the security administrator will not allow this download... How to fix this?

  Hello

  1. this problem only occurs with the installation of iTunes?

  2 did you change on your computer before this problem?

  3. What is the exact error message?

  You can follow the suggestions and then check.

  Method 1

  Disable user account control and check.

  Enable or disable the User Account Control

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-user-account-control-on-or-off

  Note: User Account Control (UAC) can help prevent your computer from unauthorized changes. UAC notifies you when changes will be made to your computer that require administrator-level permissions.

  Method 2

  Disabling temporary antivirus and check.

  Disable the antivirus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  See also:

  iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits unexpectedly, freezes, or launch issues

  http://support.Apple.com/kb/TS1717

  Problem installing iTunes or QuickTime for Windows

  http://support.Apple.com/kb/HT1926

• I found more than 5,000 new files on my PC, my spyware captured most, I turn on my PC, Windows Defender is disabled, I put most of the files in the trash, not sure of some. XML doc,

  -Microsoft Windows Vista 32 home Basic, INSPIRON 530 s, Intel (R) Pentium (r) Dual CPU E2220 @ 2.40 GHz, 6.0.1.4 revision 3853, available memory 1.2 MB, level 6. Service pack 2, English (Canada).

  Standard CD-Rom drives,
  

  The firewall Windows, Windows Defender, PC Tools Spyware (free) Spyware AVG (free).
  

  I think that I was hit by a Trojan horse!  the PC Tools Spyware caught a known Bad Site-Spyware named: apmebf.com and apmebf.com S LEGAL and I found an article about it by saying how to block cookies it is, I have not yet done... I also noticed everytime I turn on my computer, Windows Defender has been disabled, I managed to get rid of most of the files, but some, I'm not sure, they are by the XML Doc, here are a few: cpu_data XML, Doc, col_data, XML, doc, XML cm_data, con_data XML, doc, XML, doc, Doc XML dig_data cui_data.

  When I tried to open it to see what it was, he went to Internet Explorer and says the file is wrong and it could not be opened... they seem to everyone do that... they came at the same time, how do I know which are good and which are bad? I have all the strange files sitting in the trash until I know if they are good or bad... I know I have a virus now, but I'm not a computer Wizard, broke ect... Please help! Troubleshooting for Dummies?

  PS... I did have a good return upwards makes for a while, I was in the middle to clear up my files to free up space, and of course what's happening... Stupid me!

  Thanks for any help!
  

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  This is compliments of PA bear MS MVP:

  Microsoft PCSafety provides users at home (only) with free assistance in dealing with infections by malicious software such as viruses, adware and spyware (including unwanted software).
  https://support.Microsoft.com/OAS/default.aspx?&PRID=7552&St=1

  Also available via the homepage of Support of consumer safety: https://consumersecuritysupport.Microsoft.com/

  Otherwise...

  1. see if you can download/run the MSRT tool manually:http://www.microsoft.com/security/malwareremove/default.mspx

  NB: Run the FULL scan, not analysis FAST!  You may need to download the MSRT on an uninfected machine and then transfer the MRT. EXE to the infected machine and rename it to SCAN. EXE before running it.

  2A. WinXP-online Windows Live Safety Center scanner 'Protection' (only!) in Mode safe mode with networking, if necessary:http://onecare.live.com/site/en-us/center/howsafe.htm

  2B. Vista or Win7-online this scanner instead: http://onecare.live.com/site/en-us/center/whatsnew.htm

  3. now post the logs required in a forum appropriate forsupport by an expert in the field. DON'T SKIP THIS STEP!

  I can recommend the assistance of experts available in these forums: http://spywarehammer.com/simplemachinesforum/index.php?Board=10.0 http://www.spywarewarrior.com/viewforum.php?f=5 http://www.dslreports.com/Forum/Cleanup http://www.Bluetack.co.uk/forums/index.php and http://Aumha.net/viewforum.php?f=30

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• icon comments with other issues of icon and download arrow on this subject, on the Security tab.

  I'm on a laptop computer with dsl internet IE with another computer using the gateway. My os is Vista Home premium and service pack 2. I checked my settings on a regular basis and updated and scanned my system regularly. I periodically check the security settings for all the problems, and they are usually very good. However, I had taken a couple of times in administrator mode, I don't have the rights of security to certain files or programs. When I checked the security labels, I got a message that I could see the settings, but could not make changes. This should not be, as far as I know, because the administrator must have all the rights. I've never seen any icon like this on the Security tab, (or anywhere else) in the past. I went into the security on a folder tab and proceeded to bring up the list of groups and their safety features and found the icon comments soiled by a arrow pointing down. Guests (multiple) icon didn't. I can't bring up anything on this subject. I'm the only person on this computer, and I use the only admin account to do administrative tasks.  I have a personal account, which is a standard user account and both accounts are protected by Word. The guest account has never been activated. The curious to keep in mind another note is that other groups are listed under the name of my pc, but system and comments are not included, for a long time with others who are in the usual list of people or groups. I'm sure that the system must be included, because that always has all the rights. I don't have not find a way to change the icon, or find info for the customer. I searched your site and forums, as well as several other pc and tech support forums and can't find anything close to this issue, save the information on the Chameleon that MSN uses in their toolbar that makes icons from almost anything. Who is listed in my registry under MSN. It seems trivial, but I think it is maybe not so innocent, if it's way in. There are icons from two people on my printer files even if I checked them as not shared. I had checked to share, as well as the share folder normal, to see if anyone is on the network of the group to my computer profile. There was no evidence, however, I thought it would show the other computer on the local network, since the group is the same name. These icons came from. Everyone was listed as entitled to print and edit or delete parameters or printers and print on stations there. I couldn't do that. At most I would not have understood change or delete anything. In the group list, everyone was marked not with my pc name. Local service, I thought I was usually part of the active list is not marked either. System is not marked either. Here is a list of what it says:

  Administrator, administrators, ASPNET user to the debugger, distributed COM users, readers of the event log, the (acc't of the admin), comments, invited, IIS_IUSRS, IIS_WPG, Performance Log users, users of performance, (me), monitor users.

  I'm a little puzzled. Y at - it a simple explanation that I may have missed?

  In Vista, administrators have all the access rights as they did in XP.  NUMBER of cases do not have access.  There are records of point junction where everybody is seen to deny access.  This is intentional to decrease the chance that someone will change, move or delete something, they should not (even administrators).  Some of them can be modified in order to access and others require special modifications of access - which shouldn't be done without a VERY good reason (as told to do so by Microsoft Support).  What you missed is that the permissions have changed in Vista from XP.

  Here is some information on permisions and property in Vista that can help:

  To view your permissions, right-click on the file/folder, click Properties, and check the Security tab.  Check the permissions you have by clicking on your user name (or group of users).  Here are the types of permissions, you may have: http://windows.microsoft.com/en-US/windows-vista/What-are-permissions.  You must be an administrator or owner to change the permissions (and sometimes, being an administrator or even an owner is not sufficient - there are ways to block access (even if a smart administrator knows these ways and can move them - but usually should not because they did not have access, usually for a very good reason).)  Here's how to change the permissions of folder under Vista: http://www.online-tech-tips.com/windows-vista/set-file-folder-permissions-vista/.  To add take and the issuance of right of permissions and ownership in the right click menu (which will make it faster to get once it is configured), see the following article: http://www.mydigitallife.info/2009/05/21/take-and-grant-full-control-permissions-and-ownership-in-windows-7-or-vista-right-click-menu/.

  To resolve this problem with folders, appropriating the files or the drive (as an administrator) and give you all the rights.  Right-click on the folder/drive, click Properties, click the Security tab and click on advanced and then click the owner tab.  Click on edit, and then click the name of the person you want to give to the property (you may need to add if it is not there--or maybe yourself). If you want that it applies to subfolders and files in this folder/drive, then check the box to replace the owner of subcontainers and objects, and click OK.  Back and now there is a new owner for files and folders/player who can change the required permissions.  Here is more information on the ownership of a file or a folder: http://www.vistax64.com/tutorials/67717-take-ownership-file.html.  To add take ownership in the menu of the right click (which will make it faster to get once it is configured), see the following article: http://www.howtogeek.com/howto/windows-vista/add-take-ownership-to-explorer-right-click-menu-in-vista/.

  A lot of general system groups are included by inheritance rather than be listed in each file and folder - that's why they are not always there - but they are.  If you select Advanced, you'll see permissions inherited from other folders.

  I have no idea on the arrow on the guest account - I don't know what that means.  It may have something to do with safety or you installed AV programs (I know that Norton did something similar with the files to show if they have been backed up).  Personally I don't use the guest accounts and recommend against them because they are too easy to use to hack the sytem (and other reasons).  I would keep the disabled guest account and delete the duplicates but one off a (in the start menu / control panel / user accounts / manage other users).

  I don't know why you can't see other computers on your local network - that sounds like a network or installation problem connection coming to redo the connection from scratch will fix (and then you can remove the one that isn't working right).  I don't know why your printer changed - rights but you can easily set them back to how they must be with the Security tab in the properties of the printer (and other settings in the start menu / control panel / printers).

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Error: Initiator has tried to get around the security phase, but we cannot

  Hello

  I started working on the new company and tonight we lost storage for about an hour and mistakes came:

  SAN1 storage array error event
  subsystem: MgmtExec
  event: 7.4.3
  time: Sun Apr 21 00:58:18 2013
  "connection iSCSI to target '10.10.10.21:3260, iqn.2001-05.com.equallogic:4-52aed6-cb0bdf198-eee0000000c50212-vss-control' initiator ' 10.10.10.22:53396, iqn.1991 - 05.com.microsoft:sp2 - vm - sql2.company.local' failed for the following reason:
  Initiator has tried to circumvent the security phase, but we cannot.

  On windows this evening first errors began:

  EventID: 4025
  Source: EqualLogic
  connection error iSCSI 0xefff0009 connecting to the vss-control for the 10.10.10.41 group volume

  Event ID: 10
  Source: iScsiPrt
  Logon request failed. The login response packet is given in the dump data.

  These errors I see repetition of the past in the Windows event log.

  It is hyper-v virtual SQL cluster with iSCI Dell storage connection.

  How to solve this problem?

  Thank you

  Hello

  Vss control volume, which is used my MS Volume Shadow service to access the clichés of material, there's a GUY configured username. However, the initiator does not send a name of user and password c...

  If you use the EQL TYPING kit, then you should allow these servers access to this volume.  Or change the ACL on this volume to allow that the servers that need to access.

  Alternatively, you can remove it from the Favorites tab, so that he tries to log in the next time the server starts.

  Finally, you can enable the discovery of prevnet filter this of is re - produce.

  Here is a KB from the Equallogic Web site.

  Solution title error: "initiator wanted to ignore the security phase but we can not." or "initiator has tried to circumvent the security phase but we cannot."

  Symptom of solution of details: event on the web interface of PS log table shows a connection error for a volume that says: "initiator wanted to ignore the security phase but we cannot." This error can be repeated continuously every few seconds.

  Question: by default, volumes that have enabled CHAP authentication will be shown during the process of iSCSI discovery even if the initiator does not have the authentication information c. Discovery is controlled by its address IP ACL, so if a machine matches the IP address of the ACL scope, we will see the volume. Note that multiple initiators such as those that are unix based as the initiator of the Cisco software that uses VMWare will continue to attempt to connect to the target (often, every two seconds), even if each connection attempt fails. This can fill the paper and the performance of the server can have an impact.

  Solution: Limit the discovery of volumes CHAP authenticated by IP address and ensure that only servers with appropriate credentials CHAP can observe the volume at all.

  The most common volume to see this error on is the special volume named "vss control." This volume is for communication with Microsoft's VSS service, using EqualLogic host integration tools. If it is configured for unlimited access, or is configured for the CHAP only, then each initiator on the SAN will be able to find out and may attempt to use it. Set ACL "vss-admin" to enter an IP address for each machine that needs to access, to ensure that no one else does.

  For firmware version 2.2.3 and, before going to the volume named 'vss-control', select the Access tab and change the entries here in a proper way.

  For the later version 2.3.2 (including all versions 3.X) firmware, go to the Configuration Group box and select the VSS/VDS. It's the ACL for the vss-control volume, which you should change as appropriate.

  It may be necessary to restart servers that try to access this volume after changing the ACLs, however. Some initiators do not release a target once they have discovered, even though the table indicates that the target does not exist. An example of this are ESX servers, using the software initiator.

  A second scenario may be a volume that is configured to be seen from in a VMWare server VM Windows using CHAP credentials and also install on the table to use a single connection Cap. Even if the credentials CHAP is setup correctly on each side if the ESX Server uses the software initiator that ESX will attempt to connect to the volume permanently every minutes or seconds depending on factors both. With configuration to several volumes in this way, it can be a drain on performance on ESX.

  To troubleshoot this scenario make sure to activate the iSCSI discovery of the IUG table of PS filter. This is done from the Group/iSCSI Configuration tab. check the box off and save the configuration using the Green disk icon in the upper right of the graphical interface. This makes the servers with the initiators that are correctly setup to see a volume with CHAP will see and try to connect to these volumes. Note: once an ESX Server has seen a volume to continue to try to connect with the software initiator until the ESX Server is restarted after this option is turned on.

  Note that, since the version of the firmware 3.0.5 and later, you can require authentication for CHAP-enabled volumes during discovery, by issuing the command in the CLI:

  GroupName > enable discovery-use-chap grpparams

  Kind regards

• The Windows Security Center error message: could not start the Security Center service

  I did disk cleaning, defraged, ran Malawarebytes and defender of the window, unexpected uninstalled programs, all my updates are current, delete all but the most recent restore points and ran the System File Checker tool Vista who finds some errors file that it could not fix.

  When I try to turn on the windows Security Center by clicking on turin on, I get "the Security Center cannot be started."

  Suggestions?

  Frosts of North

  Hello

  Some antivirus/security products may cause this error. McAfee, Norton, Windows Live OneCare.
  ThreatFire are some. What antivirus/antispyware/security products do you have on machine now? And
  who have you ever on it, even if you have uninstalled them? (These leave the remains that can cause some)
  strange questions.)

  Check the default services and dependencies to ensure that they are running.
  http://www.blackviper.com/WinVista/services/Security_Center.htm

  Security Center not related anti-virus or firewall State correctlyhttp://www.winhelponline.com/blog/security-center-not-reporting-anti-virus-or-firewall-status-correctly/

  How to fix Vista Reporting incorrect information Security Center
  http://www.Vistax64.com/tutorials/195736-Security-Center-not-reporting-correct-information.html

  How to disable or enable the Security Center in Vista
  http://www.Vistax64.com/tutorials/67737-Security-Center.html

  This thread might help as it might be a permissions problem.
  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/3d2049ae-4581-439b-8E15-3f603f5c60f0/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• where can I find the security code to access my wireless network

  security key

  where can I find the security code to access my wireless network.

  Hello

  Check with the manufacturer of the router's support and most have forums and excellent documentation online.
  You should be able to access the router to set a new SSID and password if necessary.

  You must know the SSID (name of the router) and the password.

  If you do not know these you can find in the running on the WiFi system now with this
  free tool. This is not a crack, it should be run on a local computer that has access (or access)
  to your router. Sure, the information will not be there if Windows was reinstalled or information
  has been deleted otherwise.

  -FREE - WirelessKeyView recovers all the wireless network security keys/passwords (WEP/WPA) stored
  in your computer by the service 'Wireless Zero Configuration' of Windows XP and by the 'autoconfiguration WLAN service.
  service of Windows Vista. It allows you to easily save all keys to text/html/XML, or copy a single key to the
  Clipboard. (Works on XP, Vista or Windows 7).
  http://www.NirSoft.NET/utils/wireless_key.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Implementation error "Applicatipn has stopped working" at the opening of most of the applications.

  * Original title: Windows error

  Applicatipn has stopped working

  A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available.

  Basically, this error comes with most of the applications on my Windows 7 Professional 64 X bit. This error comes up with Gadgets, games and other applications. I don't really know what to do. I tried to clean the disc, search for viruses but everything seems fine. Could someone help me with this situation?

  Hello

  Error: Windows Explorer has stopped working
  http://support.Microsoft.com/kb/2694911

  Crashes Windows or freezes<- try="" these="" first="" and="" the="" methods="" do="" apply="" to="" your="">
  http://support.Microsoft.com/kb/2681286#method22

  Performance and Maintenance<- check="" these="" especially="" the="">
  http://Windows.Microsoft.com/en-us/Windows/performance-maintenance-help#performance-maintenance-help=Windows-7&V2H=win7tab1&V3H=winvistatab1

  Other methods of troubleshooting to use according to your needs:

  Use the startup clean and other methods to try to determine the cause of and/or
  eliminate problems.

  ---------------------------------------------------------------

  References to Vista also apply to Windows 7.

  What antivirus/antispyware/security products do you have on the machine? Include
  everything you've ALWAYS had on this machine, including those you have uninstalled (they
  remains of leave behind which can cause strange problems).

  ----------------------------------------------------

  Follow these steps:

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows
  Vista or Windows 7
  http://support.Microsoft.com/kb/929135

  Use advanced tools to solve performance problems in Windows 7
  http://www.howtogeek.com/HOWTO/6152/use-advanced-tools-to-troubleshoot-performance-problems-in-Windows-7/

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/default.aspx/GP/slow_windows_performance?p=1

  Optimize Windows 7 for better performance
  http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance

  Open the troubleshooter of Performance
  http://Windows.Microsoft.com/en-us/Windows7/open-the-performance-Troubleshooter

  To see everything that is in charge of startup - wait a few minutes without doing anything-
  then right click on taskbar - task manager - take a look at Applications.
  Process - Services - this is a quick reference (if you have a little box on)
  Lower left - show for all users, then check that).

  How to change, add or remove startup programs in Windows 7
  http://www.SevenForums.com/tutorials/1401-startup-programs-change.html

  Is a quick check to see who are loading method 2 - using MSCONFIG
  then after a list of these here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out what files, registry keys, and other objects
  processes have open, which DLLs they have loaded and more. This unique
  powerful utility will show you even owned by each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically
  When your system boots and you connect. Autoruns also shows you the complete list
  locations of registry and files where applications can configure start automatic settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor file system, registry, process, thread and DLL
  activity in real time.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  WhatsInStartUP - free - this utility displays the list of all applications that are
  loaded automatically when Windows starts. For each application, what follows
  the information is displayed: Type of startup (registry/Startup folder), Command - Line
  Channel file, the product name, Version, company name, location in the registry or
  file system and more. It allows you to easily disable or remove unwanted programs
  that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe
  not. The window Watcher says it all, every window created by each execution of the statement
  program, if the window is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp
  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Think about it an absolute must - manually update your drivers.

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded: run DriverView - set
  SEE drivers to hide Microsoft - update those without drain in their names. (Also
  updated the BIOS and drivers from the chipset on the site of the constructor/the system motherboard).

  -Free - DriverView utility displays the list of all device drivers currently loaded
  on your system. For each driver in the list, additional useful information is
  Poster: load address of the driver, description, version, product name,.
  company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit Maker as replacements and system manufacturer of device which are
  the most recent. Control Panel - write - graphics card - device manager
  the brand and complete model of your video card - double click - tab of the driver-
  Note the version information. Now click on UPdate Driver (this can do nothing
  MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard
  If there are 3rd party with their own software and drivers and the other main device drivers
  you have.

  Now, go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restore)
  and site (Realtek, Intel, Nvidia, ATI, for example) and get the manufacturer and device
  their latest versions. (Look for the system to update the BIOS, Chipset and software updates
  Site of the manufacturer here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN -.
  REBOOT after each installation.

  Always check in the Device Manager - drivers tab to be sure the version you are
  installation actually appears. This is because that some rollback of drivers before the
  later is installed (particularly that audio drivers) so install a driver - reboot.
  Make sure that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW to the device makers DO NOT RUN THEIR
  SCANNER - check manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using
  the above methods is preferable to ensure the latest drivers from the manufacturer of system
  and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  If you update the drivers manually, then it's a good idea to disable driver facilities
  in the updates of Windows, which leaves on Windows updates, but it will not be installed
  pilots who are generally older and cause problems. If updates provides a new
  driver then hide it (right click on it) and then go get new ones manually if
  you want.

  How to stop Windows 7 automatically install drivers
  http://support.Microsoft.com/kb/2500967

  ===========================================

  Refer to these discussions because many more excellent advice however remember to check
  your antivirus, the main drivers and BIOS update programs and also to solve problems
  with the first method cleanboot.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">