Moto Connect displays is not the names of all contacts

Similar Questions

• Snapshot report displays only not the name of VM

  Hello

  I publish after a command to list the current value, but I don't get a virtual machine instead of that name, I'm VMware.Vim.VmEventArgument, could you please help me

  $vm = get-content c:\vms.txt

  PowerCLI C:\ > $vm | ForEach-Object {get-vievent $_.vm} |  where {$.fullFormattedMessage - like _ ' task: Remove Instant "} | Select Createduserid, fullFormattedMessage

  14/06/2015 22:14:06	Task: Remove snapshot	VMware.Vim.VmEventArgu...
  13/06/2015 22:15:45	Task: Remove snapshot	VMware.Vim.VmEventArgu...
  06/12/2015-22:18:43	Task: Remove snapshot	VMware.Vim.VmEventArgu...
  06/11/2015-22:18:53	Task: Remove snapshot	VMware.Vim.VmEventArgu...
  06/11/2015 01:05:24	Task: Remove snapshot	VMware.Vim.VmEventArgu...
  22:12:33 06/09/2015	Task: Remove snapshot	VMware.Vim.VmEventArgu...
  06/09/2015 21:58:30	Task: Remove snapshot	VMware.Vim.VmEventArgu...

  To get the name of the virtual machine, you can use the following calculated property (on the TaskEvent).

  @{N = "VM"; E={$_. Vm.Name}}

  See also 3 Re: snapshot, that created it  

• How can I get the user name of the current user? Not the name of the user, but the user name is connected to.

  Anyone know how I can get the username of the current user? Not the name of the user, but the user name is connected to.

  Thank you!

  Only two variables that Captivate allows to work with are cpQuizInfoStudentName and cpQuizInfoStudentID, but the latter is only really designed to be used for the internal information server, not a typical SCORM LMS solution.

  Sounds to me like you may need to get hands on with the services of a JavaScript programmer.

• I can create it but not the NAME of a new folder... any suggestions? Vista SP2 Marty

  I can create it but not the NAME of a new folder... any suggestions?  Or as the administrator or user, even when the user is an administrator.  GACK!  This is new behavior, week or two...  Vista SP2 Marty

  Hi Marty_McGrath,
   
  I suggest that you want to run the file system (CFS) Checker scan that might help you to solve the issue.
  To determine if the problem you are experiencing is caused by one or more system files that are used by Windows Vista, run the System File Checker tool. The System File Checker tool analyzes the system files and replaces incorrect versions of system files by using the correct versions.

  To determine if the problem you are experiencing is caused by one or more system files that are used by Windows Vista, run the System File Checker tool. The System File Checker tool analyzes the system files and replaces incorrect versions of system files by using the correct versions.

  To run the System File Checker tool, follow these steps:

  1. Click Start and type cmd in the box start the search.
  2. right click on cmd in the list programs and then click Run as administrator.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue
  3. at the command prompt, the following line, and then press ENTER:
  sfc/scannow

  When the analysis is complete, test to see if the problem you are experiencing is resolved. If the problem you are experiencing is not resolved, use the procedure that is described in the section "the System Restore tool.

  Follow the instructions in the link below for more information on scan SFC.
  http://support.Microsoft.com/kb/936212/

  Check whether the problem is resolved.

  If this does not work, you can try to create the new user account by following the instructions in the link below and check if it works.

  Difficulty of a corrupted user profile
  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  Please post back and let us know if it helped to solve your problem.

  Kind regards
  KarthiK TP

• When you rename a file highlights only the name and not the name extension.

  Hi all

  When I rename a file, it highlights only the name part of the file name and not the name extension.  I need the name of entire file highlighted when I rename a file.  Where is the setting to change this?

  Thank you

  Pete

  Hi Pete,.

  Engineers also writes a blog on why they made this change, but to prevent millions of calls to support technical questions "I renamed my file and now it no longer opens.
  It might be possible to change this behavior with editing the registry, but I couldn't immediately find a reference to such a value.
  However, I have a workaround.  I usually press F2 to rename a file (I'm a lover of keyboard, hate having to use the mouse).  So I click on F2, then if I need to select both file extension, I can make one of these:
  • Press Ctrl-A
    or
  • Press SHIFT - end

  I generally use the method of shift - end because it's closer where my fingers are already on the keyboard (I'm a lover of keyboard, but I'm too lazy).  Hope this helps at least a little.

• Creative Cloud Lightroom import records show that year and not the name of the file that I created

  When I import files from an SD card to Lightroom, I import to an external drive as my file.  Indicates the name of the folder to the year (2015) and not the name of the file that I created (Fort Worth, 12152015).  This has happened with every import that I've done so far.  How can I fix it?

  The copy option is used to copy the files from your camera card. The Add option is used when the files are already on your hard drive. They must be copied, just added to the Lightroom Catalog. You can simply add the files that are located on a map of the camera. They must be copied to the hard drive first.

• Lists the names of all the virtual machines

  I want to display a list for the name of all the virtual machines.

  Get - VM export to much information, how to filter the info I need?

  With the Select-Object cmdlet, like this

  Get - VM | Select name

  The Get - VM product objects that you pass through the pipeline ('|) ') to the Select-Object cmdlet.

  The Select-Object cmdlet allows you to select one or more of the properties of the objects it receives.

• What is the query to find the name of all applications for all EBS R12.1.3 modules?

  What is the query to find the name of all applications for all EBS R12.1.3 modules?

  With regard to:

  Mr. Shahzad Saleem

  Try:

  SELECT * FROM fnd_concurrent_programs_vl;

• the names of my contacts will not appear in Imessage on my mac? It is only numbers. Some contact names appear but not much

  in my imessage that I can type peoples contact names and they will come to the top, but then it changes automatically to their number. contacts will be displayed, but not much.

  Hello

  Check the iPhone and Mac use the same service then synchronize Contacts.

  On Mac, including limiting to one account/service.

  There may be problems if the Mac uses iCloud, Google and Yahoo and others all at the same time.

  Most likely this isn't because of two devices sync contact lists.

  

  21:05 Monday; March 28, 2016

   iMac 2.5 Ghz i5 2011 (El Capitan)
   G4/1GhzDual MDD (Leopard 10.5.8)
   MacBookPro (Snow Leopard 10.6.8) 2 GB
   Mac OS X (10.6.8).
   a few iPhones and an iPad

• Can I use remote desktop if I enter address IP but not the name of the computer.

  Why can I do the desktop connection remote with the IP address but the name of the computer? RI

  Hello

  As topic.

  Please share how to fix my IP address is always changed. Thank you!

  Richard!

  Why can I do the desktop connection remote with the IP address but the name of the computer? RI

  Hello

  As topic.

  Please share how to fix my IP address is always changed. Thank you!

  Richard!

  If the computers aren't on the same network and and/or that the network is not along the NetBIOS name - then you will need to use the IP address or some form of dynamic DNS.  The alternative would be to change your HOSTS file so that you can give the name you want and not have to remember the IP address that is now associated with that name in the HOSTS file.

• Unable to connect to sys giving the name of the database

  Hi all
  I can't connect to the sys user when you give the name of the database, but with no database name I can connect.
  
  [oracle@ccoshs02xvdbs04 path] $ sqlplus sys/passwdA123system@mps01dev as sysdba
  
  SQL * more: Production release 11.2.0.1.0 on Tue Mar 1 10:38:36 2011
  
  Copyright (c) 1982, 2009, Oracle. All rights reserved.
  
  ERROR:
  ORA-01017: name of user and password invalid. connection refused
  
  
  Enter the user name:
  ERROR:
  ORA-01017: name of user and password invalid. connection refused
  
  
  Enter the user name:
  ERROR:
  ORA-01017: name of user and password invalid. connection refused
  
  
  SP2-0157: unable to connect to ORACLE after 3 attempts, leaving SQL * more
  [oracle@ccoshs02xvdbs04 path] $ sqlplus sys/passwdA123system as sysdba
  
  SQL * more: Production release 11.2.0.1.0 on Tue Mar 1 10:40:06 2011
  
  Copyright (c) 1982, 2009, Oracle. All rights reserved.
  
  
  Connected to:
  Oracle Database 11 g Enterprise Edition Release 11.2.0.1.0 - 64 bit Production
  With partitioning, OLAP, Data Mining and Real Application Testing options
  
  SQL > show parameter instance
  
  VALUE OF TYPE NAME
  ------------------------------------ ----------- ------------------------------
  whole active_instance_count
  cluster_database_instances integer 1
  instance_groups string
  instance_name string mps01dev
  instance_number integer 0
  instance_type string RDBMS
  open_links_per_instance integer 4
  parallel_instance_group string
  parallel_server_instances integer 1

  Purchase below and post result here

  sqlplus sys/passwdA123system as sysdba
  alter user sys identified by passwdA123system
  conn sys/ passwdA123@mps01dev as sysdba
  

  In this case if you can not connect then your entry mps01dev actually made another service.

• How to find the names of all the computers/phones connected to my account?

  I don't know if I'm the only person who uses my Firefox Sync account (if only my computers/phones are data sending and reciving). How can I check all the names of computers is connected to my account?

  Hi boogiee__,
  There are features under development to make this clearer. However, it is a place that you can watch on the desk. For active sync devices, you can visit the page on: sync-tabs into a new url bar.

  I hope this helps. Another modification of the password disconnects all devices, but also prevents you from being able to synchronize the copy of cloud.

• Firefox icon displays correctly, however the name below is just a bunch of repeated ms, ns and hs in a line continues. How can I solve this problem

  The name under firefox on my desktop icon displays an expandable string of ms and hs and ns in a lines. all other icons are the normal display with proper names below. What could be the culprit... Please help

  You can attach a screenshot?

  • http://en.Wikipedia.org/wiki/screenshot
  • https://support.Mozilla.org/KB/how-do-i-create-screenshot-my-problem

  Use a type of compressed as PNG or JPG image to save the screenshot.

  If this happens more often you can consider making a shortcut on the desktop to read-only.

• Downloaded a zipped file/folder would not, the name is too long.

  I have downloaded a compressed file/folder to a trusted site that I always. I unzipped the file (Music mp3) successfully and added to my itunes. When I tried to drag the file of music on my ipod, itunes shows his location could not be found. I went and checked on the folder I unzipped and all these other files with weird characters appears. It took 145 GB of space in my external hardrive (thank goodess). Now, I can't rename or delete the file or the folder itself. I tried a few removal tools but it did not work or when I try to download, my anti-virus software reports me. I need a way to get rid of the file. The budget is tight, so it would help if it's freeware. OR better yet a way to removed without having to download any software. I tried to delete it in safe mod and BACK. Without success. Tried Unlocker and D something software too.

  Have you tried Unlocker which would have been my first recommendation.  I don't know other programs (especially turned to the long name) free file deletion. If Unlocker doesn't work, or none will remove utilitly in Vista (because Unlocker is better than Vista).

  The commercial product ($19 I think) says that he specifically deletes files whose names are too long. http://www.abtollc.com/Folder-Delete.aspx.  I suspect that this will do the trick, but of course I can't be sure so try there is a risk that it will not solve the problem in spite of spending money on it.

  Your problem with the file may be a permissions problem.  Make sure that you have the permissions of all rights and take possession (and maybe both parent folders).  Don't forget to check the Advnaced properties for special permissions that restrict rights or inherit permissions from parent folders - you may need to remove if you already have all the rights on the main screen.  Here are the procedures:

  To view your permissions, right-click on the file/folder, click Properties, and check the Security tab.  Check the permissions you have by clicking on your user name (or group of users).  Here are the types of permissions, you may have: http://windows.microsoft.com/en-US/windows-vista/What-are-permissions.  You must be an administrator or owner to change the permissions (and sometimes, being an administrator or even an owner is not sufficient - there are ways to block access (even if a smart administrator knows these ways and can move them - but usually should not because they did not have access, usually for a very good reason).)  Here's how to change the permissions of folder under Vista: http://www.online-tech-tips.com/windows-vista/set-file-folder-permissions-vista/.  To add take and the issuance of right of permissions and ownership in the right click menu (which will make it faster to get once it is configured), see the following article: http://www.mydigitallife.info/2009/05/21/take-and-grant-full-control-permissions-and-ownership-in-windows-7-or-vista-right-click-menu/.

  To resolve this problem with folders, appropriating the files or the drive (as an administrator) and give you all the rights.  Right-click on the folder/drive, click Properties, click the Security tab and click on advanced and then click the owner tab.  Click on edit, and then click the name of the person you want to give to the property (you may need to add if it is not there--or maybe yourself). If you want that it applies to subfolders and files in this folder/drive, then check the box to replace the owner of subcontainers and objects, and click OK.  Back and now there is a new owner for files and folders/player who can change the required permissions.  You can change now switched to read-only (even if the main folder indicates that they are always read-only - you can access yourself as the owner).  You can keep them in read-only to other users, customers and administrators even (although they can support themselves and access, if they wish, and it is really not that you can do to stop it except protect the file with a password by using a 3rd party product.)  Here is more information on the ownership of a file or a folder: http://www.vistax64.com/tutorials/67717-take-ownership-file.html.  To add take ownership in the menu of the right click (which will make it faster to get once it is configured), see the following article: http://www.howtogeek.com/howto/windows-vista/add-take-ownership-to-explorer-right-click-menu-in-vista/.

  I have no other suggestions at this point.  What is the EXACT and the full path of this folder?  Depending on where it is, we are able to create a new user profile (treat your as if it is corrupted) and traansfer all data EXCEPT the folder in the new profile.  Then delete the old provile if he leaves despite this file - it might or it might not (I'm not sure).

  To try this http://windows.microsoft.com/en-AU/windows-vista/Fix-a-corrupted-user-profileuse.  If that is the only available Administrator Profile (you need to be an administrator to fix this), enable the Hidden Administrator Account (HAA) using http://www.microsoft.com/communities/newsgroups/en-us/default.aspx?&lang=en&cr=US&guid=&sloc=en-us&dg=microsoft.public.windows.vista.administration_accounts_passwords&p=1&tid=d20f9db4-7b2c-48be-a087-7835dc2a9055&mid=d20f9db4-7b2c-48be-a087-7835dc2a9055.  If you don't remember the password, try nothing because that's probably what you (or seller) did during the installation.  Once that is done, don't forget to disable the HAA to save it in case it is necessary once again and for safety reasons (since people often try to hack into systems using this account).  Do NOT use the HAA as your administrator account because if you lose the only administrator on the system account or it is damaged again, then you're watered.

  You can also try to enter in a command prompt: click on start / all programs / accessories / command prompt and right click on command prompt, and then click Run as administrator.  There Cd type a space and then type the path of the fulll name the folder in question (if it even appears).  Once inside the folder type del *. * and see what happens.  It can give you the same error message, or it can remove. Once the content is deleted type cd, and then type del (yes I know it's long) and enter. This can remove the folder.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• UDP connection via wifi in the name of 8320 tunnel met IOException:Invalid

  I am new to Java, trying to open a UDP connection on wifi in my BB8320 (V4.2.2.180).

  I have connected to my 8320 to a WiFi network and that you can access Web page in the browser (configuration: Wi - Fi browser).

  I tried with: Connector.open (DatagramConnection) (datagram://192.168.1.101:5009) and Connector.open (DatagramConnection) (udp://192.168.1.101:5009), but all got IOException:Invalid name of the tunnel.)

  Here's my Mobile Network Options in the camera: Data Services - on; Connection preference - Wi - Fi only.

  The same code works fine in the emulator, tested in a wired network.

  I googled this IOException, it seems that the TCP APN cannot be null, I tried with blackberry.net cmnet, wap.voicestream.com and even the name of the Wi - Fi connection, everyone met time-out problem.

  I have some questions below:

  1. is there any configuration that I missed?

  2. the UDP connection via wifi check the AFN? The APN configured in the emulator is null.

  3. do UDP and TCP connection API need permission in the device?

  Appreciate for any suggestions!

  Sam

  I did in the past, and IIRC the trick was to add: «;» interface = wifi; deviceside = true"to your connection string. for example:

  Connector.Open ("udp://192.168.1.101:5009; interface = wifi; deviceside = true ")"