Motorcycle G loads and then restarts
So the problem I have is when I do the following
- Turn off the Moto G
- Connect it to the wall charger USB in this case, it's an Apple 5W 1 Amp USB charger
- Motorcycle G restarts key the screen instead of display a loading screen, but continues to load after restart
Same thing happens when I turn it off while charging and it happens with another USB wall charger I use
From what I understand, it depends on the charger - some are not very well protected and it leads to the phone on.
It is not harming the phone in a sense, well that, so no need to send it for repair or whatever it is.
See you soon,.
Nicole
Tags: Motorola Phones
Similar Questions
-
My Satellite L350 keeps disconnecting and then restart.
Satellite L350 keeps disconnecting and then restart.
The fan is free from dust. I have reinstalled Windows
There is a new battery for 1 yearIf the laptop is turned off, the battery can be charged. The laptop runs normally on the battery.
As soon as the power adapter is connected, the computer turns off.
When I use the computer without a battery but with the AC adapter, the computer shuts down. Test with a different AC adapter, the computer turns off.If the cable between the motherboard and the CC is originally the problem whether it is unlikely?
Someone has an idea to help me with this problem?
> From the moment when the AC adapter is connected, the computer turns off.
There must be some kind of electronic problem of power on the motherboard.
I put t think that the AC adapter is affected since you have already tested another (good job?) Power adapter.
I think in case of malfunction of the motherboard, the laptop fix can be a costly affair
The motherboard is one of the expensive parts for laptop and I think that that's not worth buying a new part for this old model of laptop. -
Cannot open iMovie 10.1 since update to El Capitan. It starts to load, and then closes unexpectedly everytime. Older version of iMovie (8.0.6) still works. Any suggestions?
Try starting with the ALT key down. It waits for you to choose a library to open it. If it does not open your library then there is something wrong with the library.
Try running after have connected you to your computer under another account if it works, there is something wrong with the configuration of your account
Try to remove and then reinstall iMovie
Geoff.
-
Why do I often keep my modem closing and then restarting in order to stay in touch?
It is a modem from Verizon and about 3 years. I'll be in the middle to send him something, or by browsing a site, and all of a sudden the lights start blinking furiously. I have to then turn off, wait and start again then compose a message.
Thanks for all the help, and I don't know there will be MORE questions, because I'm not as savvy PC, but try to learn ;-).
Bobbie
You must determine if the modem is in fault, or something else.
Next time the problem occurs, instead of power cycling your modem, stop and turn off your PC. Then restart your PC. See if the problem has disappeared or that it still remains.
If the problem persists after restarting your PC, then the problem is probably in the modem. Call Verizon and INSIST that they replace it.
If the problem goes away after you restart your PC, then the problem is likely to be caused by a problem (hardware/software) in your PC. Check / replace the cable between the modem and the PC (or between the modem and your router).
Try closing your browser, and then restarting your browser... the problem goes away.
If you have (or can borrow) a second PC, unplug your PC and connect the second PC to the modem and see if the problem persists.
If the modem is connected to a router (and your PC is attached to the router), then cycle power to the router to see if the problem goes away. If it's a very old router, consider replacing it.
If your PC is wireless, try to fix your PC with an ethernet cable (and disable your wireless network card and allowing your ethernet adapter) to see if the problem goes away.
Good luck!
EDIT: You can also use your antivirus software to perform a full scan of your hard drive (just to rule out the possibility of the problem caused by a virus trying to 'phone home').
-
I've updated my explore since the MSN site and then restarted it said I was running a version of Windows. I then re installed Vista with my drive of origin as suggested and created that created an old file from windows to save older files and now it will not recognize the key of the product code.
original title: reinstalling vistaFrom you description of the problem you encounter, the scenario where this can happen.
Windows vista was preinstalled by an OEM or by using a Volume license installation. The problem does not occur on retail versions of Windows Vista. For example, the problem will not occur if you bought Windows Vista and installed the operating system on a computer yourself. If this is the case with your system
Solve this problem by referring to the article below.
http://support.Microsoft.com/kb/935791
To activate windows vista manually, you can follow the steps described in the links below.
http://support.Microsoft.com/kb/940315
I hope this helps.
-
MSXML 4.0 SP @ a security update (KB927978)
A security update for Microsoft XML Core Services 4.0 Service Pack 2 (KB954430)Update for XML Core Services 4.0 Service Pack 2 (KB973688) MicrisiftHe will not update these files each time that I update and then restart my PC, she just asked me to update again please helpHello
· What status appear in the historical versions?
a. Click Start, in the search box, type in update
b. click on windows Update
c. click view update history
Follow the steps from the link that has steps on how to troubleshoot Windows Update or Microsoft Update when you are repeatedly offered an update: http://support.microsoft.com/kb/910339
-
blue screen - PC keeps freezing upwards and then restarting
Signature of the problem
Files helping to describe the problem (some files may be is no longer available)
Mini091810 - 02.dmp
SysData. XML
Version.txt
Additional information about the problem
BCCode: 1a
BCP1: 0000000000005000
I keep having this problem that my pc keeps freezing and then restart and makes me nuts blue screen appears dumping things then memory dump appears I can't crun my repair for any hope of reason that can help guys
BCP2: FFFFF70001080010
BCP3: 0000000001080498
BCP4: 0000000000014C 48
OS version: 6_0_6002
Service Pack: 2_0
Product: 768_1
Problem event name: BlueScreen
The system version: 6.0.6002.2.2.0.768.3
Locale ID: 2057
Hello
To see how to use BlueScreenView and MyEventViewer to troubleshoot the Bluescreens see the
Methods indicate in this thread - top 3 answers.-------------------------------------------------------------
Remove ALL power and reinstall all the memory cards and cables (both ends where possible).
in fact, remove and replace - don't do not just tight. Make sure that the vents are clear and that the
the fans are working. Even if the temperature is OK assume no heat does not affect the video,.
sound or other system functions that it these get hot. Try adding a small fan blowing in
the vents as a test. (These are especially for a PC not a laptop.)Have you recently added any hardware? Have you updated any drivers just before this started?
(Check control panel - updates of Windows to see if all drivers have been updated it on the)
This started the time) likely guilty hand are video driver, other great drivers, memory, and
antivirus/antispyware/security products could be at fault as well as reader questions.Use the troubleshooter below and refer to the following message to drivers and memory when
you get these sections and then back to the resolution of the problems according to the needs.BCCode: 1a 0x0000001a<-- read="">-->
http://www.faultwire.com/solutions-fatal_error/memory-management-0x0000001A-* 1041.html? order = votes-------------------------------------------------------------------------
Look in the Event Viewer to see if something is reported on those.
http://www.computerperformance.co.UK/Vista/vista_event_viewer.htmMyEventViewer - free - a simple alternative in the standard event viewer
Windows. TIP - Options - Advanced filter allows you to see a time rather
of the entire file.
http://www.NirSoft.NET/utils/my_event_viewer.htmlHere are a few ways to possibly fix the blue screen issue. If you could give the blue screen
info that would help. Such as ITC and 4 others entered at the bottom left. And all others
error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.As examples:
BCCode: 116
BCP1: 87BC9510
BCP2: 8C013D80
BCP3: 00000000
BCP4: 00000002or in this format:
Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000It is an excellent tool for displaying the blue screen error information
BlueScreenView scans all your minidump files created during ' blue screen of the.
death ' crashes and displays information about all accidents of a table.
Free
http://www.NirSoft.NET/utils/blue_screen_view.htmlBlueScreens many are caused by drivers of old or damaged, in particular the video drivers
However, there are other causes.You can do mode if necessary safe or the Vista DVD command prompt or
Options recovery if your system is installed by the manufacturer.This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxYou can try a system restore to a point before the problem started when one exists.
How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html-------------------------------------------------------------------------
Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
RUN AS ADMINEnter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
program generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228The log can give you the answer if there is a corrupted driver. (Does not work
tell all possible driver issues).Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-------------------------------------------------------------------------
Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
keyboard and mouse, as well as of other major device drivers.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlHow to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx-------------------------------------------------------------------------
How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
quit unexpectedly
http://support.Microsoft.com/kb/958233Troubleshooting, STOP error blue screen Vista
http://www.chicagotech.NET/Vista/vistabluescreen.htmUnderstanding and decoding BSOD (blue screen of death) Messages
http://www.Taranfx.com/blog/?p=692Windows - troubleshooting blue screen errors
http://KB.wisc.edu/page.php?id=7033-------------------------------------------------------------------------
In some cases, it may be necessary.
The Options or Vista recovery disk Startup Repair
How to do a startup repair
http://www.Vistax64.com/tutorials/91467-startup-repair.htmlThis tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxI hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
I was doing a reformat of the factory for windows vista on the laptop of my son (packard bell EasyNote LJ 65) when the battery is dead and the computer turned off. When I started it back up it gives the message: the computer restarted unexpectedly or encountered an unexpected error. Windows Setup cannot continue. To install Windows, click OK to restart the computer, and then restart the installation.
Everything I try, I get no further than this message, I don't know where to go to continue the installation. The computer does not see that the installation was not completed. I tried to enter the menu with F9 where I had to do the reformatting of the factory of windows but it will not give me the option to continue installation, it shows just the vista Windows, but when I click brings back me to the error message
Help, please!http://support.PackardBell.com/UK/
For questions about the recovery process, contact the manufacturer of the computer.
This isn't their recovery process, Microsoft.
See you soon. Mick Murphy - Microsoft partner
-
How can I configure my windows 7 after restoring my laptop to the factory conditians?
My laptop had a blue screen and I couldn't get rid of it, I went into safe mode and restore my computer to factory conditions. When the computer says "the installation program starts services" you stop and I couldn't turn it back on for 15 minutes. When I turned on and tried to contained my setup, a message keeps poping up "the computer restarted unexpectedly or encountered an unexpected error." Windows Setup cannot continue. To install windows, click ok to restart the computer, and then restart the installation. "But no mader, how many times I reboot my laptop, the same message appears. What should I do? I've restored my computer several times and never had this problem.You should try another recovery.
New computers coming often pre-installed with Windows 7 have what is called a recovery partition. This is used to reinstall an operating system in the case of a system failure. To access it, you need to start when you start your computer by pressing a function key. This can be either F1, F2, F9, F10, F11, F12 key DEL or tab. See the manual that came with your PC for instructions on how to reinstall Windows.
If your recovery partition is not available or damaged, you must contact the manufacturer of your computer, and request that a defined recovery disk you can use to reinstall Windows 7. They could practice a small shipping and handling.
-
Windows 8 refreshment stops at 77% and then restarts and displays an error
I can't update my Windows 8 Pro because when I do, it stops at 77% and then restarts and displays an error (there was a problem during the update of your PC)
Hey Sajjad,
I understand that you cannot update your computer Windows 8.
1. did you of recent changes to the computer?
2. Why are you trying to refresh Windows 8?
I suggest you follow the steps mentioned below and check if it helps.Method 1:
I suggest to disable all external devices except the mouse and keyboard and try to refresh.Method 2:
Use the check disk command for all errors on the hard drive.
Warning: We recommend not to interrupt the CHKDSK process. Microsoft does not guarantee the integrity of the disk if the CHKDSK program is interrupted. Security, you can back up your data before using check disk drive.
Use the drive control as follows:
a. press the Windows key + X, and then choose command prompt (Admin) on the shortcut menu.
(b) in the search box type 'cmd' and ENTER. Right click and select "Run as Administrator".
c. type at the prompt in the command CHKDSK/p and press ENTER to scan the drive.
d. type CHKDSK C: /F /R and press ENTER to repair corrupt sectors, if there are.NOTE: The root drive must be C: and drive can schedule a task to start the system, if this is the case, press on is to schedule a task, and then restart the computer to run chkdsk.
When chkdsk is finished, boot up to the desktop, and then check.Important: When running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area so all available data on this risk to be lost
You can follow the links below for more information.
How to restore, refresh or reset your PC:
http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PCHow to create the installation media for a PC refresh or reset:
http://Windows.Microsoft.com/en-us/Windows-8/create-reset-refresh-mediaRefresh and reset your PC:
http://blogs.msdn.com/b/B8/archive/2012/01/04/refresh-and-reset-your-PC.aspxWarning for update: the applications that came with your PC or you installed on Windows Store will be reinstalled, but all the apps you have installed other Web sites and DVD is deleted. You will find a list of applications on your desktop after you refresh your PC.
Warning for the Reset: all your personal files will be deleted and your settings will be reset. All the apps that the is come with your PC will be reinstalled, but all other applications will be deleted.
Hope the above information helps.
Let us know if you have other questions about Windows in the future. We will be happy to help you.
-
need help this is the message that I have this morning cannot launch Adobe InDesign that you do not have sufficient permissions to access the preferences folders. Make sure that you have the appropriate permissions and then restart Adobe InDesign.
Hi amyturnkey,
What operating system do you use? (Windows / Mac?) What version number?)
This thread pourrait be useful: error starting InDesign CC: '... ". lack of sufficient permissions to access the folders preferences'
Kind regards
Maurice -
A new installation of indesign CC 2014 - I got this error message:
Cannot launch Adobe InDesign that you do not have sufficient permissions to access the preferences folders. Make sure that you have the appropriate permissions and then restart Adobe InDesign.
I tried to uninstall the application and reinstall it, still get the error
I tried to install a previous version - indesign 9; also get the error
I tried logging out CC and return, still does not work
I tried restart my desktop computer, still does not work.
went to the disk utility to verify and repair permissions. repaired all of an existing, still does not work
Apparently, a permissions problem, I don't know what to do to fix this
-
MP3 plays for a few seconds and then restarts
I created an MP3 player that works perfectly fine on my local machine but online plays the song for a few seconds and then restarts the song. He then played completely. The next songs also have the same behavior.
Someone at - he meets away the problem before? Do you know a solution?
Thank you in advanced for your help.
I found a way to preload the mp3 before you play. Thank you for the help kglad.
-
Vista Start, freeze at loading green bar screen then blue and then restart
Sorry if this is a repost, I look for a solution to this for 2 days on various forums and have not experienced this problem yet.I got my PC for about a year, it is a free version, it worked without any problems until a couple of weeks, where it started to slow down like crazy. Unfortunately, I was in College at the time and my brother does me on issues. It would essentially work normally (but a bit slow) and then freeze every few seconds. Once he was able to start - I think that the error message was that the boot files were corrupt or something, but it was an a stop.After about 3 weeks of slow driving, it has started to do the following:
I turn it on and it tries to start. The progress bar green for microsoft vista comes up for a few seconds, then a blue screen of death hot flushes (too fast to read anything on this subject) upward and the PC restarts.
If I try to start in safe mode it freezes while it lists the drivers
its loading. The latest display driver is constantly crcdisk.sys. (I tried all security modes and last good config without result).I put in the recovery disc, choose the language and click Windows repair.
The next dialog box is called System Recovery Options. The problem that I get here, it's that there are no operating system in the list. It says that I should look for the hard disk drivers, but I don't know how to find them. My drive is a 1 to seagate barracuda.Wierdly when I choose the option to install as if I was going to do a complete reinstall did it come with a disk of 1 TB on options and drive didn't spent the short seatools test. When I tried the seatools long test program frozen before the same test started.
The hard drive has a lot of photos and I don't want to lose so I'm hesitant to do a complete reinstall.
I also was not able to run a memory test because I can't find the memory test facility in my BIOS. I found once, but can't seem to figure out where it is more. The motherboard is the gigabyte GA-MA790XT-UD4P.
Thanks in advance for any help.
kwond
I think you have a hardware problem with your hard drive. You need to consider (the system) to a competent computer repair shop for service, repair or replacement (or you can send it to the manufacturer for service - check on prices, warranties and other times before deciding). A problem of crcdisk.sys is typical disc hard problem (but it may be other things) - but your problem description convince me that it's the hard drive.
If you can make a drive on another computer, make a recovery disk using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with the burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD (perhaps made on another computer). One of the options on this disc is a Test of memory, so you can at least try it - but the problem is probably not the RAM, but rather the hard drive.
You can use Knoppixhttp://www.knopper.net/knoppix/index-en.html with a good ISO as Copier: http://isorecorder.alexfeinman.com/isorecorder.htm as well as a blank CD (done from another computer). This should give you enough access to the system (if you do not have any other means) to back up your important data, unless the hard drive is so far that even if it won't let you. You can try to slave the drive to another computer and see if you can access the data in this way - if so, at least you will be able to backup your data. If this isn't the case, I'm afraid only a data recovery technician can help and they are very expensive and do not guarantee the results - but the decision is yours.
At this point, if you want you can try a reinstall full (if it works) have nothing to lose. If it works fine. Is that the problem persists, then it's almost certainly the hard drive.
I hope this helps.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
OPERATING SYSTEM. Windows 7 (X 64), FF38.0.1. Windows Media Player. I downloaded media Player for You Tube videos; Download video help. Simple video player you Tube HTML; You Tube Flash video Player. Yet I'm not able to play a video from any website that broadcasts continuously. Constantly, it is loading, showing a few seconds of the video and then load it again. I realize that somewhere in my set up of this aid, I'm missing something important. The fact that you are in 70 years and not too familiar with all of these technical tricks makes sometimes very frustrating.
Please help either by proposing a plan of action or a link where I can learn to do it properly.
Thank you
RobertThis site is what is happening other than Youtube?
If it's just that the site and that you have successfully installed all of them please restart Firefox and go to the page.
If you have not yet tried the flash, here are the instructions how to do this:The other player supported is the HTML5 player, who should take the lead by default.
Given that it is giving questions I could just try to update your drivers:
Maybe you are looking for
-
Date incorrect appointments Siri 29 February
Recently, Siri has been setting bad appointments. I ask Siri "Please create a new appointment for Friday at 14:00 -" where Friday's March 25. Siri means correctly creates the appointment, and then displays the date and reads on 29 February. Occurs on
-
Satellite M30: Lack of reader DVD-CD ROM D:
MY COMPUTER SATELLITE M30 IS MISSING, perhaps DAMAGED, the EQUIPMENT RELATIVE to the UNIT DISC DVD-CD. I TRIED TO CANCELED AND REINSTALLED, BUT THE MESSAGE FOLLOWING ERROR APPEARS: "DVD-CD ROM UNIT NOT CONNECTED." SO FOR NOW I HAVE C: DRIVE UNIQUE FI
-
I have downloaded Nokia music, downloaded a few tracks but when I try to play I get a message like this "year error occurred in Windows Digital Rights Management (DRM) components on your computer." Contact Microsoft technical support for help
-
My router keeps losing its ip if I leave the computer for a while and Outlook falls asleep
When I use my computer and let it until he goes to sleep I loose my ip and must allow the Os to fix the problem, I installed the wireless with the installation CD, and he put the password and and and works, but why should we stop on me, please help.
-
A way to load external files in applications WebWorks
Hi all I am facing the following problem. My application is able to play the animation sequences of 16 colors on a screen of matrix of LED 34 x 18. I am working on a set of tools that make it relatively easy for people to create their own animations