Motorola Atrix random DOWNS CLOSED!

Similar Questions

• I need to sync to a new computer with a motorola atrix

  I bought a new computer, and now all of my favorite Office are available only on my phone Motorola Atrix. I have the sync key that has been used when I created the mobile, but none of the synchronization of the directions address back on the desktop.

  Thank you
  Lori Peyerk

  You will need to synchronize the user name, password and key to download the news of synchronization on your new computer.

  Firefox button > options > sync

  • In the add a device screen, click on I don't have the camera with me.
  • Then, enter your account name (email address) and password, Sync key click

• Motorola Atrix 4 G camera won't initialize

  The stock for my Motorola atrix 4g camera does not work. When I pull the top of the camera or camcorder. The screen is black. As if there is something blocking the lens. Camera overlays are present. The shutter button and zoom in and out keys. After a while, I get an error message "Failed to initialize the camera" then I have to force close. There is nothing of blocking the lens. I thought it was a software problem. I've tried everything. Date of factory reset twice. I tried different camera software, removed the battery, power cycles. Nothing works. Everything else works fine. I scoured the internet for a solution. There is no solution, only the complaints from other users of android with the same question. I think it's a hardware problem. I have one question. Do you know if the replacement of the camera on the device will solve the issue? Thank you.

  If it helps the phone got really hot at a time where the screen started turning black on the upper right when the camera is located on the other side. That may have something to do with it.

  But I want to know if the camera replacement will solve the problem for me. Thank you.

  I SOLVED THE PROBLEM

  It's a mechanical problem. I replaced the flex Ribbon that holds the camera, the volume buttons and front detectors. When I removed the Ribbon flex, I noticed a burn mark on the underside of the flex Ribbon. Thus, the reason that the unit stopped working because the phone has overheated twice and stop. That had something to do with damage to the Ribbon of flex.

  So, after replacement of the flex Ribbon. The camera is fully functional. If you encounter this problem, the only way to fix it is to have the flex replaced Ribbon.

  If you want more information, please let me know. I want to help.

• How to update Motorola atrix 4.0.500.ME860. Retail.en.05 to the gingerbread

  How to update Motorola atrix 4.0.500.ME860. Retail.en.05 to the gingerbread

  Froyo 2.2.2

  Bought in Hong Kong, to aid in India

  surajrk, if your Atrix is the Hong Kong version, you should receive an OTA update. Otherwise, try to access

  http://www.motorola.com/update, select Hong Kong, choose ME860 and download the update of the Motorola software.

• Re unlocked Motorola Atrix (MB860) use in to THE

  ATT unlocked my Motorola Atrix 2 (MB860). I am in Australia and bought a Vodafone SIM card. The voice works fine, but there is no data connection (which is included in the plan I bought). Called technical Vodafone and they sent me a "Profile Configuration" file via SMS to install to run the Internet connectivity. I am hesitant to install it. But they promised that this will not negatively affect my phone (but yet they cannot explain what it does).

  Can someone explain what this Config profile could do to my phone, and why it is necessary? And why I can't do it myself via the phone settings? My background is engineering network, I'm also curious. Pointers to explanations already on the Web would be fine.

  It is my first foray into data usage in other countries. Thank you

  Dave

  There are pay services (and some carriers) for this same function. Basically, it is supposed to set your APN settings so that you have the data connection. Just add an additional parameter that you can disable or remove if you wish!

  You may need to go to a level more high support to get the actual content - my guess is that phone representatives will only send the config files.

  It's very nice of them that several carriers just throw up their hands and make you find the settings on the line.

• Setup Motorola Atrix with Google TV via a HDMI device problem, help?

  I'm curious to know if anyone has had problems with implementation of devices via HDMI or using the Motorola Atrix (I'll be crossed this announcement on the forums Android and Motorola too to see what response I'll be there too).

  "After connecting my Atrix, turned to the Google TV (29') using the HDMI cable I got with the phone, I go to 'Settings' > 'Video input' > HDMI settings" > "Device list" > and click on "Enable", I get an error message that says:

  No HDMI devices have been found. Please check the connections.

  Thanks to a default function I chose, the "remote control" screen on my Atrix.

  I tried all four cards HDMI on the TV and received the same error message.

  Anyone would be able to help me solve this?

  I have the Sony NSX24GT1 24 and my phone is a Motorola Atrix Mobile phone black MB860 running on the Android 2.3.4 version.

  p.s. I really like my phone and I really like my TV and the possibility of using the two together! I really hope I can get help with this. Thank you!!

  Fixed! I had to press the input button on the very complicated, heavy Google TV remote control button (bad design).

• Whenever I connect my Motorola Atrix to the PC, Windows XP closes and the PC freezes

  Original title: Smartphone closes windows

  Whenever I connect my Motorola Atrix to the PC, Windows XP closes and the PC freezes. Does anyone else have this experience.  The connection works fine on my laptop.

  Hi patsatrix,

  1. When did you start to question?

  2. you remember to make changes to the computer before this problem?

  3. This occurs when you connect other USB devices also?

  You can try to configure the computer so that it starts cleanboot and check if it helps.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353/en-us

  Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.

  Hope this information is useful.

• Motorola Atrix HD MTP driver fails to install

  Update my phone Motorola Atrix HD, tried to install the latest drivers from Motorola via their package install MotorolaDeviceManager_2.3.9.exe.

  Software appears to install correctly, but when I connect the phone, it shows the installation of drivers in the sandbox, but will appear then the MTP driver fails.  I have tried to uninstall the driver from Device Manager, where it shows device MTP with yellow triangle, restart, then install the drivers and then connect the phone again, same results, have tried several times.

  The driver in the device, shows the error 52 code Manager, which means it does not recognize the digital signature of the driver, but I know that it is a valid driver of Motorola, so what gives?

  Operating system is Windows 7 Pro 64 bit.  I read many forums and nothing seems to have this problem of fixing.  Any ideas would be appreciated.

  Thank you

  Hi Chris,

  A yellow exclamation mark next to a device in Device Manager means that Windows has identified a problem any with this device.

  The yellow question mark is displayed as the full size of the device icon and appears when a device is detected but not installed.

  Try the following methods and check.

  Method 1:

  I suggest you to run the Microsoft Fixit and check if it helps.

  Hardware devices do not work or are not detected in Windows: http://support.microsoft.com/mats/hardware_device_problems/en-us

  Method 2:

  If the problem persists, I you suggest to uninstall the drivers and software and then try to reinstall the same and check if it helps.

  Uninstall or change a program: http://windows.microsoft.com/en-US/windows7/Uninstall-or-change-a-program

  Hope that the information provided is useful.

• Cut random downs and crashes. Computer laptop closing at startup. No virus, what is - this?

  A few months my computer has been acting crazy. Lately, it is essential, it is closed right after it starts. Another thing, it tends to do is to enter a State of low power (not in standby or Hibernate), with all the lights and power always, by discoloration to a black screen. I tried every key sequence to bring my screen, but it never does, so I find myself manually shut down my computer in now the power button. Last night I shut down my computer and as I turned it on this morning I had the 'blue screen of death '. I have no virus and I'm starting to think that this has something to do with the inner workings of my computer (things that I have no idea about). I don't know if I need new drivers, need to clean my registry, I've already defragged my computer, or if I have a chance to save my laptop.

  I also don't have any specs on my computer and don't know how to find them or the other. These problems that I said start to become a great inconvenience, but I have a bunch of stuff saved on my computer, so it is difficult for me to move on to the other laptop I have for my daily use. ANY help would be greatly appreciated, I'm desperate!

  Hello

  Could be heat related - try using a small fan to blow into the air intakes to see if that helps.
  It is just like it loses power or stop it in the normal way?

  To be able to remove ALL and reinstall all the cables (both ends), card and memory - really remove
  and replace - do not just tight. Remove the dust bunnies and clean the vents. Check that the
  fans of work (before and after opening the case). If a laptop on what you can do is reinstall
  memory and clean the ventilation openings (still may try to add a small fan as a test).

  ===========================================================

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  You can use Mode without fail - repeatedly tap F8 that you start?

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  Hope these helps.

• Cut random downs

  My HP laptop with Windows Vista stops randomly.  Usually, he stops and restarts if you put it to sleep, but sometimes it remains just closed as I'm in the middle of working on my laptop.  How can I fix?  It was only a recent problem.

  Hello

  Check with HP, their drivers support and documentation online and ask in the forums of HP where there will be others with your model for known issues.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  =========================

  Could be heat related - try using a small fan to blow into the air intakes to see if that helps.
  It is just like it loses power or stop it in the normal way?

  To be able to remove ALL and reinstall all the cables (both ends), card and memory - really remove
  and replace - do not just tight. Remove the dust bunnies and clean the vents. Check that the
  fans of work (before and after opening the case). If a laptop on what you can do is reinstall
  memory and clean the ventilation openings (still may try to add a small fan as a test).

  This sounds like material so if the above does not help you then probably need the help of a
  real computer store (not of leeks and glances at a Best Buy or other department stores) or the system
  Support from the manufacturer.

  ===========================================================

  Check out these utilities to see if information may be collected:

  It is an excellent tool for displaying the blue screen error information

  -Free - BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  and displays information about all accidents of a table.
  http://www.NirSoft.NET/utils/blue_screen_view.html

  -------------

  MyEventViewer can be verified at the time of the blue screen (BSOD) within a second or so of the
  time of the BSOD to provide more information about the possible cause - see TIP.

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
  Set it for a bit before and after the time of the BSOD.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  ------------

  AppCrashView - free - a small utility for Windows Vista and Windows 7 that displays the details of all the
  application goes down has occurred in your system. The information breaks down is extracted from the .wer
  the files created by the Windows Error Reporting (WER) of the operating system component of each
  time that an accident has occurred. AppCrashView also allows you to easily record the list of accidents to
  text/html/csv/xml file.
  http://www.NirSoft.NET/utils/app_crash_view.html

  ------------------------------

  Also do this so you can see the probable bluescreens. (You may or may not be able to see
  them if they occur even after doing this according to the cause.)

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  (also Windows 7)
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  =========================================

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  I hope this helps.

• How to buy a genuine replacement battery Motorola Atrix

  I would like to have another, anyone know how to get one?

  Website of ATT, Motorola, don't list one.

  Of course, I could get Chinese knock-off batteries by the cargo, but those who are not reliable and could explode and aren't just worth the hassle.

  Any suggestion employees of Motorola?

  It's a Motorola BH6X. It is listed as an 'Extended' Droid X battery, but that's the one even in the Atrix.

  Here it is in the Motorola store: link

  You can also find it on some popular sites of 'shopping' as well, just use the model number. (I don't want to enumerate all specific sites because of Community regulations)

  Oh, you might be able to find in a Verizon store, just ask for the Droid X Extended Battery and make sure it's a BH6X and NOT a BH5X.

• N100 random diferrent closing problem... RESOLVED (clik for solution)

  Hi, this is my first post...

  I bought a friend a Lenovo 3000 n100 0768-6vg(made in 06/08)

  It worked fine except for the drums, which I think he's dead...

  When I connect power cord the charge led flashes red once then green and stays like that for about 4-5 seconds... sometimes after a few minutes it starts to blink red as he is in charge, but he died iven after 20 minutes...

  in any case I don't mind the battery problem... the main thing as it sounds...

  I started the leptop and worked verry well, answered all the functions but I disliked the windows install so I installed a new copy then the problems started...

  He had originally Windows xp home edition and I wanted to install windows xp sp2, a new install...

  After installing windows, when I was a few steps to end install, the leptop suddenly shutted down

  now when I try to start windows, after 5-10 minutes it randomly stops

  Iven if I left it in bios mode it stops... I managed to get into windows and install SpeedFan to check temperatures and it is said that the cpu has aprox. 48-50 degrees celsius in normal mode...

  After a reboot I tried to stress him out and get a maximum of 60 to 65 degrees...

  I am desperate... I have tried averything... power without battery... no hard drive (with an xp live usb)...

  could someone help please?

  PS: I have experience in the repair of office but this thing is relatively new to me...

  an update of the bios could not solve my problem? : s

  I found the problem by a mistake ... .the how it happened

  I opened the leptop and close to the circuit of battery I saw something strange... I think that a liquid has managed to enter... I have only out cleanead and nothing... I removed the battery but still nothing...

  the solution I found sounds is like this:

  If you remove the battery charger wile it is still plugged, the 'bad' run will remain in the leptop through capacitors... Yes,

  Unplug the charger...

  Battery remov...

  leave it like that for 1 to 2 minutes wile pressing the power button (to drain run it), and then reconnect the charger without the battery...

  and voila, the liptop works fine without restarts and other animals

  I hope this will help others who encounter this problem... at least they can try this before taking the leptop at a service center

  Cheers!

• All the games to reduce at least randomly down to desktop/taskbar

  Hello world

  For some time, and I am sure that just after the release of catalyst, no matter what game I use started to push down / / minimize to the desktop, but the game is still running. Basically, the game itself crashed not just minimized in the task bar, I just click the icon in the bottom taskbar and open the game and I go. This is happening in every game at least once. Anyone got any idea where to start?

  Games, FSX, MW3, Mafia2, Dirt3 all games to minimize random

  They reduce to a minimum on the pages title, or during the action that the computer doesn't have to be under any load, the time cpu are never more than 50 'c, the graphics card is hardly under any load and temp is about 60' c

  I deleted all the graphics card drivers and re-installed them in Device Manager, it shows 2 items, amd radeon HD6800 series & Intel(r) HD Graphics Family.

  How to check a newspaper immediately after the event?   What part of the "Event Viewer" should save this type of problem, so I can find the problem?

  -------------------------
  Windows 7 Ultimate 64 bit... full of updates
  Intel Core i7 2600 k 3.4GHz Socket 1155 8 MB
  Card mother Gigabyte GA-Z68XP-UD3P
  Corsair Ram 16 GB (4x4Go) 4096 MB 1600 MHz 9-9-9-24
  Sapphire 11180-00-40R HD 6850 1 GB GDDR5 PCIE... .latest drivers
  Primary, second HDD 300 GB, third disk 160GB, 250GB
  DirectX 11, primary monitor iiyama Prolite E2473HDS
  Dell E193FP 19 "VGA monitor
  SideWinder X 4, wireless G from LINKSYS WAG354G ADSL

  The problem is now solved, it has been 'update of Adobe flash player". Any game stops as soon as I noticed the time and it was 14 minutes after the hour exactly. I then went to the event viewer, as suggested in the "summary of the Task Scheduler', there was this line ' Adobe flash player update 16/04/2012 23:14 at 02.14 every day after Triggered repeat hourly for 1 day" which is a load of * is every day. So I turned off the program using 'msconfig' and restarted, but still he stopped. So I uninstalled Adobe flash player update Adobe media player and the problem disappeared. Tried to contact Adobe to complain, but no luck even not an email addy sent to the.

• Motorola Atrix 4.1.57 updated for Non - AT & T users?

  I am currently with Bell Canada, and when updates are available? Can I download the update manually?

  (

  ( http://www.motorola.com/staticfiles/Support/US-EN/Mobile%20Phones/ATRIX_4G/US-EN/Documents/StaticFil...)

  Thanks again!

  . Eric

  @Eric

  This update (4.1.57) is for AT & T only. This update is not currently available also for Bell Mobility. We will provide details if an update is available for Bell Canada. The update method may vary, but we like to do Over the Air updates as much as possible.

  If you have a phone unlocked from AT & T you get the update if you are using official factory installed software. If you have changed the software of your phone in any way he can make it difficult to update. Your profile shows "Rogers" If you indicated Bell in your original post.

  Mark

  Support Forums Manager

• LabVIEW is randomly down 4 or 5 bytes from front of sequential readings

  I posted this topic in the forum, VISA, but there seems to be no traffic, and this seems to be a problem of software anyway. I have a serial device that is supposed to echo all commands and then send it to arrive at an answer firther. My problem is that LabView is declining the first 4 or 5 bytes for the echo, and there is no clear reason for whether it is 4 or 5 bytes. Using a terminal I get the response you want:

  $ echo - en "\xFA\x30\x4\x43" >/dev/ttyr02

  $ od - x<>
  0000000 30fa 4304 30fa 4304 30fa 050 has 2e06 010 a
  0000020 9478

  It did the right thing at the level of the operating system, but Labview still refuses to read the first 4 / 5 bytes. Someone saw something similar in the past? I'm pulling out my hair. The thing is, I can use LabView to write random bytes to a serial port, reading from each other by a null-modem cable, and everything I write comes back fine. Therefore, there is no consistency. Is 0xFA one kind of specificity of who I should be aware?

  Have you tried thw VISA writes and reads the synchronous value?  as a use of emulators or Terminal?  Click with the right button on the functions, and then select Setup (the clock in the icon should disappear.

  And the FA would be 4 of those to get attention followed by 1010 for recovery of clock on the end