Motorola earbuds (Nexus 6 use)

Similar Questions

• Cisco Nexus to use authentication Radius AAA using Microsoft 2008 NPS

  I have a Nexus 7010 running

  I was wondering if you can help me with something. I'm having a problem with the approval of the order through our aaa config. We have not an authentication problem of command approval that does not work. From what I've seen and read Nexus NX - OS 6.x has not all orders for the aaa authorization, unless you configure GANYMEDE +. My basic config is below if you can help would be much appreciated.

  > ip source interface mgmt radius 0

  > key RADIUS-server XXXXX

  > host X.X.X.X key radius server authentication XXXXX accountant

  > RADIUS-server host X.X.X.X XXXXX key authentication accountant aaa

  > authentication login default group aaa authentication Radius_Group

  > RADIUS server logon group console local aaa Radius_Group

  > server X.X.X.X

  > server X.X.X.X

  > mgmt0 interface-source

  Also nobody how to configure Microsoft 2008 NPS as Raduis server to work with Nexus? I read a few post that suggests to change the

  Shell: roles = "vdc-admin" in the value field of the attribute in the RADIUS server

  Anyone know if it works?

  Thank you

  I haven't used NPS before but sounds like you are on the right track. As Ed mentioned in his post, GBA, you can set the type of protocols that you will accept during an authentication session. Authentication Nexus sessions is considered as PAP/ASCII, so you should be good to go. I don't have a Nexus switch to test with, but if you can use wireshark to capture the session and see the exact protocol / method used. However, I am sure that PAP is the way to go:

  http://www.Cisco.com/c/en/us/TD/docs/switches/Datacenter/SW/4_1/NX-OS/se...

  I also found the link that you might find useful:

  http://www.802101.com/2013/08/Cisco-Nexus-and-AAA-authentication.html

  Thank you for evaluating useful messages!

• The LED screen is used in different iPhones to AMOLED?

  I have a neurological disease, and when I tried the iPhone 6 it caused severe pain in my eyes. Talk to Apple, I think that there are many factors, which increased the contrast ratio and the double domain pixels for wider view angles. Each single possible remedy and the brightness setting advanced (things like abd reducing the point white/reduce transparency/darken colors and also using the trick in the zoom settings which can be lower than the standard options brightness) has been tried with the help of the Apple support, but nothing helped, so I went back to my iPhone 5 s.

  I am interested in the iPhone, and screen specifications are the same as the children of 5 years, with the exception of the screen LED instead of the LCD screen. He explained to me by a sales guy Apple that this would make the brighter than 5 s screen, but I hope that this can be supported with advanced above settings and functionality of night shift, which I already use. I tried once a Samsung phone with an AMOLED screen, and who has been terrible for my eyes and had to be returned.

  So, when Apple said that the SE (and their other current phones) are HEADED, they mean AMOLED, or is there a difference? Any information would be appreciated. Thank you.

  No, Apple did not use any screen AMOLED displays still on any of their devices.  Poster of line Samsung Galaxy may be best know series with AMOLED screen, but Motorola and Nokia have used on some of their devices too.

  Any screen LCD needs backlight behind it to display anything, and on small portable devices that meant for the White Backlight LED (older computer LED screens and televisions used actually cold cathode ray tubes - fluorescent tubes).  Apple retina displays are still fairly traditional IPSLCD led displays for the backlight.  "Retina" is just brand name Apple for their superiors than standard resolution LCD screens.

  The terms LED display and the LCD display are unfortunately become almost synonyms in the speech from the market.  But the actual display is an LCD screen and the light source that shines through it to display the image's LEDs.  An LCD on an iphone without backlight appears simply black.

• Homescreen & com.motorola.blur.home eats battery

  Have had this problem since the JB update, the phone was off the charger for 2 hours and is already at 40% battery (was 100% when it is removed from the charger). When I see what has worked on the battery, com.motorola.blur.home has used 7% 25% battery, Android OS 16% and Android system. I can only assume the homescreen, it's who bleeds dry since it is the only shared process I can say. Backup Assistant + and Sync Service have both been disabled since the update, so I don't "think it would be that." Any help is appreciated as a 60% battery to drain after less than 2 hours is unacceptable.

  
  

• Motorola Assist lack of driving Mode

  Hey guys, I got the bike g 2014 US version. I love it, I have a small problem though, the assist from Motorola has only 2 options, sleep mode and the mode of the meeting. I saw on YouTube there are more than that, like driving mode and other things. But I don't have those. No idea why? Thanks in advance

  Hey, I got a message this morning update Motorola text, he linked using Motorola, I don't know why, it is still new to the phone, but in any case, this solves the problem and who drive, fashion and home showing in there. Thanks for the help, I hope this will help others also. Dave

• Market app Android (Motorola Cliq XT)

  Hey guys, I just did a factory reset on my phone. I use motorola cliq xt and using t-mobile. The problem is once I did the reset and turned on the phone I'm not able to use the app on the market. Whenever I click on it, it closes. Anyone know what's the problem? I can't understand the problem...

  Can someone help me? Please, I beg you.

  He could have an error during installation. Go to settings > applications >

  manage applications > market. Once you're there, press the button clear cache

  and restart the phone. You will need to set it up again, but it should work

  normally after.

  November 21, 2010 21:56, "Lau".

• VMware and Nexus internal support for layer 2 priority vSwitch (802.1 p)?

  Hello

  Can someone provide a definitive answer on whether different types of vSwitch manage layer 2 priority internally (i.e. 802.1 p).  In other words, these switches internally generate queues waiting seprate, based on the received priority tag 802,1 p, then manage each of these queues at the specified priority (highest priority first transmitted). Or what's a queue internal so efectively not a priority within the vSwitch, just from any external switch (physical) marking in the path.

  Interested in the answer for each of: standard vSwitch, Distributed vSwitch, Nexus vSwitch.  In vSphere 5 and above.

  I asked similar questions before, and no real clear answer.  Apologies if I've simply not spotted, but I searched the docs of VMware and Nexus and of course google pretty bad too.

  Thanks for the answers or pointers,

  PeterB

  The Nexus 1000v using CB - WFQ

  With Cisco Nexus 1000V Series Switches Release 4.2 (1) SV1 (4) or more recent, virtualization environments can now also enjoy based on a class of weighted Fair Queuing for congestion management.

  Here is a white paper.

  http://www.Cisco.com/en/us/prod/collateral/switches/ps9441/ps9902/white_paper_c11-704041.html

• Installation of Nexus 1000V

  Hello

  I tried to install the Nexus 1000V using the CLI on a 4.U1 Server ESXi remote.

  I use after a command

  C:\Program Files (x 86) \VMware\VMware vSphere CLI\bin > vihostupdate.pl b-i "c:\Program Files (x 86) \VMware\VMware CLI\ vSphere.

  "Cisco-vem-v100 - 4.0.4.1.1.27 - 0.4.2.zip '-SCSC-sesx002 Server

  Enter the user name: root

  Enter the password:

  Please wait install the fix is underway...

  There was an error resolving dependencies.

  Asked to VIB cross_cisco-vem-v100 - esx_4.0.4.1.1.27 - 0.4.2 comes into conflict with the host

  No VIB provides ' vmknexus1kvapi-0-4' (required by cross_cisco-vem-v100 - esx_4.0.4.1.1.27 - 0.4.2)»

  But as you can see, there is an error message.

  If there is a mismatch between the version of Nexus and the ESXi4.

  I use more ESXi version 4.0U1: 208167 in evaluation mode.

  Does anyone have an idea why this happens?

  Thank you

  Concerning

  Jürgen

  Jurgen,

  You use the bad VEM module for the patch of the ESX kernel that you are running. Take a look at the link for compatibility with the VEM module

  http://www.Cisco.com/en/us/docs/switches/Datacenter/nexus1000/SW/4_0_4_s_v_1_2/compatibility/information/n1000v_compatibility.html

  For the core ESX 208167, you should install VIB 4.0.4.1.2.0.80 - 1.9.179

  It also seems that you try to install a module VEM 1.1. I strongly suggest to download the package N1KV from cisco.com and get version 1.2 from N1KV.

  Louis

• PS Touch 1.4.1 on Google Nexus 7 - license check fails

  I just installed PS Touch 1.4.1 on my Nexus 7. I bought and downloaded from the Google game store. When I start the application, it does allow me past the first screen. The message is "license check failed', and he tells me to connect to Google Play. I am already connected to Google Play.

  I use two accounts on my Nexus and using one of them with the game of Google makes no difference. PS Touch always reports a license check failed.

  Help!

  Karen

  For the launch of the fist of the PS Touch you need

  a network connection. You can try to reinstall

  play store. Hope that helps.

  -Guido

• His problem with non-Toshiba laptop

  Hi, I just bought the 7.10.18 are now available for computers laptop toshiba-no, but feel what seems to be a bluetooth connection problem: when I play music or a bt transmitter connected to a stereo player or a motorola headset sound is interrupted during 1 second every 4 seconds - the problem is not related to the bt device as it appears on 2 different (transmitter + headset) devices , or his source that the problem occurs with streaming music (via wifi) and a CD of music played on my laptop (CPU 2.2 GHz + 32 bit Win7Pro)...
  Any help is greatly appreciated!
  (btw, does anyone know of a formal support / helpdesk for a bt-stack PURCHASED license?)

  What headset motorola model do you use?
  It is fully charged?
  What is your distance between portable headphones during the operation?
  Do you use an any other bluetooth devices at the same time?

• Satisfied by Epox BT BT-DG06B and Satellite M70-144

  Hello!

  I bought the Epox bluetooth dongle. It also manages the bluetooth version 2.0 and 30 metres range.
  I use it via battery Microsoft BT who was already installed by default on my laptop Satellite m70-144.

  I think that my BT is not compatible with the Toshiba BT stack, or? Why should I use some other stack as stack windows? Are there differences between the batteries?

  Can I use my Nokia 6260 as a modem via BT. that was what I wanted.

  First of all, I tried to install software from toshiba is delivered with epox adapter but failed every time to install on my computer toshiba laptop. He was unable to install all the drivers and Setup was a loop... I also tried the most recent software (downloaded from www epox site) but the same effect.

  Really amazing was that this installation has worked well with my laptop to another, but not with Toshiba.

  By the way could someone tell me what is PAN and why should I use?

  Hello Vincent

  In my opinion, you can use what you want, and no one forced to use software from Toshiba. If you want you can use the battery Windows BT.

  I have Motorola mobile phone and use the Toshiba BT software. It works perfectly. The configuration is pretty easy.

  With PAN (or maybe PIN) number you average on key to past of identification for matching between laptop and mobile phone?

• Tecra 9000 - blue screen when connected to the Internet via mobile phone

  Hello

  I have a problem with the blue screen that appears when you use IE and internal Internet by Motorola V547 via Bluetooth connection. BlueScreen begins to appear more and more often.

  There is no special software installed for motorola, and I also use fresh Windows 2000 after using the restore CD.

  What could be a problem?

  Blue screen shows two kinds of errors:
  1 * STOP: 0X0000001E<0x0000047,0x8042EDB1,0x81789468 ,0x818a6320="">
  KMODE_EXCEPTION_NOT_HANDLED
  2. * STOP: 0X0000001E<0x0000047,0x8042EDB1,0x00000400 ,0x00000031="">
  > KMODE_EXCEPTION_NOT_HANDLED

  I'll be very grateful for any advice.

  Hello

  This path is not easy to say what the problem may be, but please check this Microsoft document on this subject. http://support.Microsoft.com/?scid=kb%3ben-us%3B818194&x=13&y=11

• Texts in doubles with my Motospeak

  Hello! I have a Motorola HX550 that I use with my Samsung to Skyrocket on AT & T. My problem is with the app Motospeak.

  I send double texts every time that I reboot the flare. There is no trace on my phone that I sent them, but one or more of my recent texts go out again as soon as I re - start. I found the culprit is the application of Motorola 'My Motospeak. Uninstall the application, the problem disappeared. Looks like it's the answer, but I REALLY like the application; It's a big part of why I got the HX550 and why I recommend Motorola headsets for friends and family.

  This problem did not exist on my HTC Inspire with the same application and headphones. The Android Version on this phone is 2.3.3

  No idea how to resolve this, or another application that works the same?

  My phone: Samsung rocket illuminating. (SGH-I727)

  Android version: 2.3.5

  Thank you!!!

  Thanks Twanika!

  I found the problem because the flare was requiring a reboot to get the receipt of data. There is a problem with both phones LTE on AT & T. I have a temporary solution in place, but every now and then I still need to restart the phone. In hindsight, I can't say if it inspires had the problem or not. It is so stable that I never restarted... I find the functionality of the application to be close to perfection, nothing else comes close. I use the old version of Motospeak, located on this site without any problems, but it doesn't have the functionality to text, just to listen and respond.

  A mod for versions that would be nice would be if the software delivered texts after a phone call. Right now, if you receive a text during a phone conversation, Motospeak just doesn't know. What would be better would be if after the end of your call, Motospeak are looking for new texts and ask if you want to listen to them.

  Thanks again!

• HP Envy bow 27: NXP ProximityBased SmartCard Reader XP NearField provider HP Envy proximity devices tilt

  Unfortunately, I couldn't find a category for two NXP devices: NXP ProximityBased smart card reader and the provider of proximity NearField NXP in the HP Envy bow.

  We hope a moderator can add the RFID of AIO category perhaps.

  HP provides a tag (Touchzone writer) writer, but no player as far as I KNOW. Why not?

  Help HP TouchZone writer mentions a free Credential Manager, but it offers no link to download.

  I tried different cards to chip and labels RFID (that I can read with my phone Nexus 5), using various applications 3rd party RFID Windows, nothing has worked.

  What is RFID going to be better supported by HP? Transport companies are moving to load maps of transport in common RFID via home computers. My HP ENVY TILT will be ever able to do?

  TouchWriter HP help mentions a free Credential Manager, but it offers no link to download.

  Is there a driver update available through the WIndows Device Manager for NXP ProximityBased SmartCard Reader, which allows to detect rfid/read.

  This update is NOT available through HP Support Assistant.

  I am still unable to write an opening of session, because the tags that I do not have enough memory. HP is unable to specify the amount of memory on an RFID connection label.

• Total for the port-channel when speed config speed 1000-nexus5548?

  Hello world.

  now I connect cisco 6509 and nexus 5548up using two link of 1000M and I want the two link port-Channel binding.

  5548up port 10GE port cisco 6509 is 1GE, I config speed 1000 in nexus5548 ethernet port, and I find

  the speed 1000 order auto config interface port-channel, so I would like to know the total speed in this channel port

  is 1000M and 2000M when port-channel speed config 1000? I appreciate your help!

  the topology like this:

  1000M

  --------------------------------------------

  6509 port-channel speed 1000M nexus5548UP

  ----------------------------------------------

  1000M

  Hi again

  The speed of the links and portchannel is 1000M but the bandwidth of the portchannel is 2000M