Mounting of the Scans

Similar Questions

• Target Disk Mode - MacBook is not mounted in the desktop iMac

  I have a MacBook to 2015 and a cable USB-A-USB-C marked 'SS '.  In November 2015, I might start my MacBook in TDM and plug it into my iMac 2013 and see him mount on the desktop.  I could then synchronize some of the files (using synchronize folders) and have up-to-date on my MacBook.  Both computers running El Capitan.

  But about 3 months ago this system has stopped working.  Editing of my MacBook on the desktop iMac became sporadic and now never happens.  I have tried different cables, connected to different USB ports (the back of the iMac, iMac keyboard and a Flash to USB dock (Belkin)), but no joy.

  Has updated the firmware of computers?  El Capitan has stopped this feature very useful to work?

  Any ideas, anyone?

  Chris

  As a work-around, there are other ways of synchronization of files between devices.

  iCloud Drive, Box, OneDrive, DropBox, Google Drive. These will make everything you do.

• Want 4520: Change the scanning resolution

  How can I change the resolution of scan JPG on my 4520 want? It is default to 600 dpi, and there is no option to change it.

  Thank you.

  Hello
  
  Thank you for using the HP Forums.  Have you installed the software features FULL?

  If you don't have, can you download and install the software COMPLETE features of HP printing for your operating system:

  The following resources will help you:
  
  HP printer install wizard for Windows
  http://ftp.HP.com/pub/softlib/software13/COL50403/MP-150580-2/hppiw.exe

  Once you have downloaded and installed the software, FULL of features, you will be able to print and scan.

  Start the scanning software and follow the steps belowto (for example) to change the resolution.

  Hope that helps!

  

  
  
  Hope that helps.

• How to change the location where the scan of the computer updates the file?

  I would like to know how to change the location where the scan updates the file.

  HI ROT2,.

  It depends what printer and the software you use?

  Normally, you will find a 'save to file Option save' like the screenshot below.

  

• Save the Scan OCR HP

  As of today, when I do an analysis of the OCR, I can't program to save him.  The error message is that the scanned document cannot be saved to the specified location.  All the other scan functions work perfectly and the OCR scan worked fine until today.  Help?

  Reload the software, and then try again.

• OfficeJet 6700: I've just updated my 6700 software and have lost the scan icon and the software - what I can do to fix this?

  I've just updated my software and have lost software and icon of scans!
  What to do to restore it?

  I use Windows 8.1 and trying to connect by wifi for the 6700. The scan icon reappeared today and scanning works now.
  This recovery seems to have fixed things.

• "The scan of the computer is enabled is no longer" false error

  Hello

  I bought and installed a HP DeskJet 3521. It is configured for wifi connectivity to two computers on our home network. A laptop computer is 8 64-bit Windows. The other is Windows 7 Pro 64 bit.

  The printer seems to work perfectly. However, the driver regularly (as in all the several minutes or so) pops up a message saying "the Scan of the computer is enabled is no longer" or something like that. It is apparent from the system tray. It fades after a few seconds. Otherwise the printer seems to work very well. This happens on two laptops.

  Laptops are in the same room as the printer and the router. The signal strength is high.

  Why did this message occurring and is there a solution for this?

  Thank you

  It is very probably the same problem I had with the HP printers for years.  It happens when the printer goes into a power saving sleep state and falls of connectivity.  To resolve the issue, you have to walk on the printer and the power of the cycle.  It has NOTHING to do with your router or static/dynamic IP allocation.  It's the fault of crappy entiely firmware and HP software.  HP 'experts' are playing the same game of blame-the-other-manufacturer or blame the old user that HP has always played.

  My current HP printer is the third HP sub-standard product I've owned... on three (Yes, I know, shame on me twice).  I've owned a high-end, expensive laptop which overheated during playback of a video to youtube and two printers which disengages automatically when they entered in the mode 'sleep'.  It will be the last HP product I already own...

• How can I get my HP Officejet Pro 8600 more to send the scanned item directly to e-mail?

  I just moved to the top of a new HP Officejet Pro 8600 more a HP 6500 printer.  On the old 6500, it gave me the choice to send the scan to my email, however, that option is not available for me on the new scan of 8600 software.  How can I add email to my choice of where to send the scan?

  Thank you...

  Hi NICOLI12,

  Welcome to the HP Forums, I hope you enjoy your experience!

  I understand that you want to know how to scan to e-mail.

  I'll be happy to help you.

  You should be able to analyze through the scanning software HP to e-mail can also scan to e-mail from the control panel of the printer. I have provided a document to find out how Scan.

  Hope that solves your problem.

  If you are on Mac, please let me know.

  Thanks for posting on the HP Forums.
  Have a wonderful day!

• Failed to read the scanned text

  scan, but in a text that I can't read. How to change that? It says Rich Text.

  Thanks again for your help.

  However, I still have a problem.  When I see the digitization of documents, it looks like what I put on the scanner, but when I try to recovered, it I can't understand most of the things I see on the scanned document saved.

  I hope I explained the difficulties properly.

  Kind regards

  Dorian

• HP 8740: Vertical lines, while the scanning & photocopies

  I bought a new HP8740 about three weeks ago and everything worked well until today.

  Now I have black vertical lines down the scan or photocopy.

  First of all, I turned off the printer for 30 seconds and put the plug directly into the wall.  It did not work.

  I turned off - unplugged for 5 minutes - but still has the black lines.

  Can someone please suggest something else I can try.

  Hello @gouldian, thank you very much for your answer.

  The only difference between the analysis of the dumpster and using the ADF is where scanning occurs. Uses of the ADF Strip glass (1 "wide) toward the left side of the pane of glass for analysis. Cleaning if ideally white scanner ADF lid and glass ADF scanner should have solved the problem.

  I suggest you to do a blank copy on ADF, keep the page in front of you and carefully clean the place, you get the line in the band scanner & the white plastic strip.

  If the issue is always I suggest you to clean the ADF mechanism itself. You can watch a video of HP http://hp.care/2bYt7Qu that will help you to do this. The video is made using the Officejet 8600 printer, but it's the same for your printer as well.

  Please let me know what happens. Thank you!

  See you soon

• Office jet Pro 8600: how to change the folder for the scans on my Apple?

  Hi, I want to know how to change the destination for my scans folder when I scan from the printer.  Currently, the scans go to "documents", and I want him to be in a business case.  Clues?  I tried to watch some instructions on the previous posts, but it seems that they are for windows.

  Thanks for the help!

  Hi @jgossc,

  I'd be happy to help you change your scan destination. I understand that when you scan your Officejet Pro 8600 to your Mac, the file analysis is currently underway to your documents and want to let them instead to a business case.

  To change the destination please follow the steps below and let me know the results of your efforts:

  • Open HP utility
  • Select Scan to the computer
  • Click Scan tasks to change
  • Choose a shortcut to scan
  • Select Edition
  • In the options listed here, you should see scan destination

  If this resolves the issue, please click Accept as Solution button below; If not, let me know and I will do everything I can to help. Thank you.

• Allowing the scanning of an iMac

  I have a HP Photosmart 6510 printer which I use printing and scanning wireless to my iMAc. It worked fine before with the iMAC and I have no trouble printing or scanning of my windows machine now.
  
  I've recently updated to Yosemite on my iMac. When I try to scan, I get a message that the scanning is not enabled. When I go on the website of the printer to try to turn the analysis, I get a message inviting me to "connect to"Admin"area on hpfc4632.local.:80.
  
  It asked for name and password. I don't know what is required - something for the printer or the iMAC? I tried my iMac names and passwords nothing helps. I don't know what else is necessary.
  
  Can someone or give a hand?
  
  Barry

  Hi Barry (@Barfar),.

  Welcome to the HP Forums!

  I think I can help you find another way to activate the scan of the computer on your Mac under OS X 10.10

  Under the FAQ section of this document to scanning with HP software full feature in OS X v10.10 Yosemite , under the heading why my printer does not scan to the computer from the Control Panel, it will explain another way to activate the scan of the computer. You are now able to scan without problem? If this is not the case, the error changed at all?

  I hope hear from you soon!

  

  In support of Movember

• During the scan, the half of the page is black

  All of a sudden happened during the scan I get half of the color of black (dark grey) page. Page is cut vertically.

  Please can someone help. Shud I go to service. I tray to change to the USB cable is no difference.

  Any help?

  MIKI

  I find relays... to help others with the same problems... semi full reset solve my problem.

  How?

  ... combo would be: - 'print picture' + "red eye removal" buttons who - printer not ask you to enter the combo - release the buttons you press - press "red eye", "print photo", "red eye" in the order - scroll down or to the right until you find resets menu - press on ok - do scroll down or right until you find semi full reset - press ok
  -your printer should turn off, wait for 3 minutes before turning on the printer.   .....

  That's my scans are now OK!

  Concerning

• HP Photosmart Premium C410b: could not save the scanned images

  I use the HP Scan application and the error message: -.

  Could not save the scanned images

  appears when you try to save in a folder as a PDF or any other format.

  Ironically, if I'm going by sending to the printer and then save to PDF it works!

  I checked and I'm using 4.2.2 with El Capitan HP driver software

  Any thoughts?

  Hello

  The application from HP for your printer is not compatible with El Capitan, so the output files incorrectly recorded.

  In the Hewlett-Packard folder move HP Scan to the trash and empty it.

  Before you install and use the HP Easy Scan application below which should save the files correctly:

  https://iTunes.Apple.com/us/app/HP-easy-scan/id967004861?MT=12

  Kind regards

  Shlomi

• the scan to pc error - photosmart 5520

  I can not scan from the printer to the PC, the printer detects the computer but then it says that there is a connection error. However, I can print, scan to e-mail,... without problem.

  I installed and unisttalled the software twice but no avail. I tried the scantopcactivationapp.exe program, but it does nothing.

  How can I solve this?

  Thank you.

  See if these solutionsresolve the scan connection problem you are experiencing. Let me know if it helps!

  Thank you