Mouse and keyboard Center does not detect MS Trackball Optical

Similar Questions

• Microsoft Mouse and keyboard Center recognizes not Microsoft Wireless Notebook Optical Mouse 3000 says no device detected

  Original title: Microsoft Mouse and keyboard Center does not recognize my Microsoft Wireless Notebook Optical Mouse 3000'

  My Microsoft Wireless Notebook Optical Mouse 3000 works fine but when I click on it in the devices section and printers on Panel, Microsoft Mouse and keyboard Center does not recognize. It displays the text "No Device detected". Here is a screenshot of what I see:

  

  Hi faignard,

  Thanks for the reply. It is regrettable that uninstall the existing mouse device manager drivers did not help to solve the problem.

  I suggest that you go to the program and features under programs installed and check if there are any associated with IntelliPoint software or any software application related to the mouse installed. In the affirmative, please go ahead and uninstall them and then try to install the driver software IntelliPoint 8.2 in compatibility mode as stated in my previous post dated 22 December 2014. See the following link on how to uninstall program:

  http://Windows.Microsoft.com/en-us/Windows-8/uninstall-change-program

  Please answer us on the State of the question to help you further.

• Bluetooth Arc touch mouse without being detected by the "mouse and keyboard Center."

  The mouse is paired with your PC via bluetooth and works very well.  (Please re-read that last sentence before you send information on how to pair.)

  However, when I open the Microsoft Mouse and keyboard Center, it says "no device detected".  For example, I can't change the settings of the mouse. There are the most annoying rattling noise that I would turn off.

  Have uninstalled Microsoft Mouse and keyboard Center, reinstalled latest version. IM using windows 7.

  Hello Frazer,

  We want to get this support, please follow the steps on how to solve Microsoft Mouse and keyboard issues:

  1. run the hardware store in Windows 7.

  2 steps on how to install the driver in compatibility mode:

  a. do the driver installation file right click and select properties and then tap or click on the Compatibility tab.
  b. check run this program in compatibility mode.

  c. press or click the menu drop down and select a previous operating system, and then tap or click OK.
  d. try to install the driver and verify.

  Let us know how it goes.

  Kind regards

• Microsoft Mouse and keyboard Center 2.3.188.0 is not Exchange buttons of the mouse correctly with Windows Remote Desktop

  I use Microsoft Mouse and keyboard Center for years with no problems. For example, version 2.2.173.0 worked well. I use Windows 7 Professional 64 bit.

  I swapped the buttons on my Comfort Optical Mouse 3000 (so that the right button's "click" and the left button displays a context menu, for example). When I connect to a remote computer, traded buttons continue to operate as programmed.

  Just set Windows Update to update my mouse and keyboard Center to the 2.3.188.0 version. Now when I use the Windows Remote Desktop to connect to another computer that is running Windows 7 Professional 64 bit, my button is not honored. In other words, on the local computer, the right button of the mouse is 'click '. On the remote computer, the left mouse button is 'click '. The keys are reversed on the local computer, as I have it configured, but not on the remote computer.

  I called Microsoft and was transferred to various departments. I would like to report this bug, although I have to pay out of pocket, but there seems to be no way to report this bug.

  Is there a way to report this bug to Microsoft? Is there a solution? How can I revert to a previous version of Microsoft Mouse and keyboard Center?

  I suggest to perform a restore of the system to a restore point before the update.

  You can also uninstall the keyboard and the mouse Center programs and features.

  Then, go to this site and download the previous version.

  (I couldn't find any previous version on Microsoft sites, but I checked the file hash values, I downloaded Microsoft previously).

  MD5: 4a2fb26c01d96b25487735da2925f89a

  SHA1: a68199c29a840dc8719c7f644ae14a4b138f65e7

  http://www.userdrivers.com/keyboard-mouse/Microsoft-mouse-and-keyboard-Center-2-2-173-0-for-Windows-7-8-x86-x64/download/

• Mouse behaves badly after the update MS Mouse and keyboard Center

  I use a model wireless MS Mouse 4000 and MS Mouse and keyboard Center 2.1.177.0 worm installed.  Since this update the scrolling behavior does not work correctly.  In a particular program (a simulation game), scrolling works much too fast.  If I go into the centre of keyboard and mouse and adjust the scrolling speed, it works well.  But when I restart the previous settings seem to be lost, so I have to put once again.  I use Win 7-64 bit.  The mouse worked fine before the 2.1.177.0 version.  Any suggestions?  TIA

  PS I vaguely recall a default update but can find no trace of that.  Running MS Mouse and keyboard Center seems normal.  There is no obvious command 'save settings', so I guess it does it automatically.

  Paul

  Hi Paul,.

  Thanks for posting your question on the Forums of community of Microsoft.

  Check out the link and follow the steps in the article:

  Troubleshoot the incidents of the response to the mouse or wireless keyboard

  http://support.Microsoft.com/kb/838398#appliesTo

  See also:

  Mouse, touchpad and keyboard with Windows problems

  http://Windows.Microsoft.com/is-is/Windows/help/Mouse-touchpad-and-keyboard-problems-in-Windows?T1=tab05

  Check out the link and check the number of the update has failed.

  See the Windows updates are installed

  http://Windows.Microsoft.com/is-is/Windows7/see-which-Windows-updates-are-installed

  If you are able to get the number of the update failed, try to install the updates manually.
  Reference:
  http://www.Microsoft.com/en-us/download/default.aspx

  Hope this solves the problem.

• Mouse and keyboard Center shows only the keyboard settings

  I have Win7 64 bit and a Microsoft Intellimouse Optical USB. In the last update of IE, the Microsoft Mouse and keyboard Center shows that the keyboard for the configuration of the pushbuttons - MOUSE WITHOUT! When opening the mouse configuration directly in the Panel... only keyboard commands show! The mouse is a 4 button and is reduced to 2 buttons now. I have re-installed the mouse without result. Help!

  Hi Larimar,

  I see that you have some problems with the Microsoft keyboard and mouse after an update. I'll help you with this problem.

  1. What is the brand and model of the computer?

  2. What is the model number of the Microsoft key and mouse Panel?

  3. what security software is installed on the computer?

  4. that update was installed recently?

  Method 1.

  Run the troubleshooter of material and check.

  Follow the link given to open the Hardware Troubleshooter: http://windows.microsoft.com/en-us/windows7/Open-the-Hardware-and-Devices-troubleshooter

  Method 2.

  If you know what update has been installed recently, then you can uninstall or delete this particular update and check.

  Remove an update: http://windows.microsoft.com/en-US/windows7/Remove-an-update

  Method 3.

  System Restore: http://windows.microsoft.com/en-us/windows7/products/features/system-restore

  Important: System Restore will return all system files not as documents, email, music, etc., to a previous state. These files of types are completely affected by the restoration of the system. If it was your intention with this tool to recover a deleted file to non-system, try using a file instead of system restore recovery program.

  Method 4.

  You can update drivers and then try to install the update.

  Update a hardware driver that is not working properly: http://windows.microsoft.com/en-US/windows7/Update-a-driver-for-hardware-that-isn ' t-work properly

  Additional information.

  Support for Microsoft mouse, keyboards, LifeChat, LifeCam & more: http://support.microsoft.com/ph/7746#tab1

  Let us know if you need assistance with any windows problem. We will be happy to help you.

• Can't install/uninstall Microsoft mouse and keyboard Center!

  Hi, I got problem with the Microsoft Mouse and keyboard Centre because he doesn't identify my touch mouse correctly (classified as a HID-compliant device and not by its name as my Sidewinder X 4 keyboard). I uninstalled from Add/Remove Programs, and I also uninstalled the drivers for my mouse AND my keyboard (because it showed a double receiver device in device manager). I restarted my computer, but when I tried to install the drivers again in the process of installing mouse and keyboard I got an error message telling me that it was already installed. I uninstalled it again (the "ghost" of it is still listed in Add/Remove Programs) and restarted. When I tried to reinstall, I got the message again who told me that it was already installed. This is when strange things began to happen. The program was once again listed in Add/Remove Programs (this time with its icon and not only a "ghost"). I tried uninstalling and received a message telling me that the uninstall process could not be met because some the original installation files have been corrupted or missing. But now, the program has been listed in the Windows Start menu and when I double click it it started an installation process ceased to immediately resume a message that mkc.msi was missing from a temporary file to My Documents, and he could not proceed, so now I can't install or uninstall the cursed thing. I tried to restore my computer but it doesn't solve all problems. I suspect that some registry entries are not deleted properly when the first uninstall process. I don't want to mess with the registry by myself, at least not until I know what registry entries are created by and in connection with the program. Any help would be appreciated.

  Thanks in advance

  Hello spmisik,

  Thank you for the question!

  I'm sorry to know that have problems you with Microsoft Center of mouse and keyboard. As I understand well you can't install/uninstall Microsoft Mouse and keyboard Center.

  I need to ask you some questions to help you best.

  1. the problem persists with a particular application?

  2. were there any changes (hardware or software) to the computer before the show?

  Run the fixit and check.

  Solve problems with programs that cannot be installed or uninstalled

  Answer to us if you are having problems with Microsoft Mouse and keyboard Center or any other issue of Windows, and I'd be happy to help you again and try to correct the problem as soon as possible.

  Good day!

  Hope this information helps.

• HP Solution Center does not detect that I've added a second printer

  I am running Vista and have the center of solutions HP (latest version) installed and have HP 2575xi connected network.

  HP Solution Center recognizes my HP 2575 x, and everything works.

  But now I have an extra F4280 HP I want to add in via the USB port on the computer.

  First I tried to install it just just pilots F4280, hoping that the HP Solution Center would detect the new printer, but it didn't.

  Then, I tried the "Full Install" from the installation disk supplied with the F4280. But he determined that I already have all the software installed, so it didn't install anything.

  Center of HP solutions certainly looks like he can handle multiple printers (it has the tabs at the top). But I can't seem to recognize the new printer.

  I could try to uninstall and reinstall. But I'm worried that HP Solution Center does not detect the 2575xi since it is a network printer.

  How can I know the HP Solution Center to detect and add my new printer?

  Thank you.

  When you install the F4280 software, and it is said that the latest version of the software is already installed, then it should give you an option to 'add a device', no?

• Problem with wireless - Vista Network and Sharing Center does not recognize my connection!

  I use the Home Visa software and my network and sharing Center does not recognize my connection but I can access the internet without any problem. Previously, I was using a wireless router Linksys with an old box of AT & T internet with no problems. The problems started after I updated my AT & T internet box that made obsolete the linksys router and now the network share does not connect. I just have the problem of getting the network and sharing device recognizing that I am actually connected to a wireless network. I can't use my printer or share files with other people. I can't get my wireless printer to work if I restart my computer and I have the documents I want printed already sent to the printer. My network and sharing Center also works very well for a few seconds when I start my computer then it turns off again.

  Hello

  Method 1:

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:

  You can also view the related items for more information.
  The problems of Internet connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Network connection problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  Solve problems, find wireless networks

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks

  Method 3:

  Setting up a wireless network

  http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-wireless-network

  Wireless network card: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/wireless-networking-frequently-asked-questions

  See also:

  Connect to a network with Windows Vista wireless

  http://TechNet.Microsoft.com/en-us/library/bb878035.aspx

• The link to support Microsoft Mouse and keyboard Center appears broken

  I downloaded the last Microsoft Mouse and keyboard Center (version 2.7.133.0 on Windows 7 64 bit). [This now supports Excel with the ergonomic mouse Sculpt, thanks!] I noticed that there is a support link that is supposed to take you to the "Microsoft Hardware Support Page.

  When I selected, it opens http://go.microsoft.com/fwlink/?LinkID=259866 which seems to be a broken link. Is anyone else seeing this?

  BTW, it should really be a more easy/obvious way to report this bug, but I couldn't find a (another using telephone support, I guess, but that seems silly). Perhaps it is the location of the broken link? :-)

  Hello

  Thanks for the update on the issue.

  This seems to be a problem of compatibility on the Internet Explorer 11, sometimes this can be corrected by adding the site to your list of compatibility view.

  Difficulty of the problems to view site with compatibility view

  http://Windows.Microsoft.com/en-us/Internet-Explorer/use-compatibility-view#IE=ie-11

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

  _______________

  Thank you best regards &,.

  Isha Soni

• How to remove Microsoft Mouse and keyboard Center?

  Hello, I look at a log of the events, and I noticed that there was some sort of error with the keyboard. Recommended action was to remove the driver and reinstall. So that's what I did. I have a Microsoft Comfort Curve keyboard 2000. Once I deleted the driver, then I tried to reinstall the driver which is bundled in a package called Microsoft Mouse and keyboard Center. After downloading and extracting, invites a mistake: "this version of the software is already installed on this system. To re - install this software, you must remove it all first, and then rerun Setup from the installation media. For more information about removing a program, see Windows Help. "So, naturally, the first thing I did was look for an uninstall. Hmm, nothing to add or remove programs, there is nothing in the folder of the Start Menu. So the only other thing I could think to do was to delete the files in the C:\ directory, I did. But still, after trying to reinstall this driver, I get this same error. Will you please tell me how to remove this software from my computer, so I can reinstall it, so that I can use the good driver for my keyboard instead of ' HID Keyboard Device. Thank you.

  Hi, I thought about it. Or, at least, I understood how to uninstall. It turns out that Microsoft Mouse and keyboard Center is in Add or remove programs, you just need to search to find it. And I uninstalled. So, I'll just reinstall and go from there.

• How can I swap buttons of the mouse on a--no Microsoft Mouse with Microsoft Mouse and keyboard Center? (I have a Microsoft keyboard).

  I did a new install of Windows 8 on my Dell desktop computer that has a keyboard, Microsoft Natural 4000 and Dell's USB mouse.  Windows 8 Microsoft keyboard recognized and automatically downloaded and installed Microsoft Mouse and keyboard Center version 2.0.162.0.  However, I'm a lefty mouser and installation of the MS mouse & keyboard Center back on my right handed mouse buttons.  (I went to control panel |) Mouse and swapped buttons immediately after installation.)  When I went into the control panel. Applet of the mouse and the keyboard and mouse Center had resumed the first tab of the control panel mouse properties, stating "click here to change the settings for the Microsoft mouse.  This is the tab where the "Swap mouse buttons" is usually.  When the mouse and keyboard Center is launched, it offers only options for the keyboard.  Do I have to abandon my Microsoft keyboard or purchase functions go a Microsoft mouse to get exchanged my mouse buttons?

  How to swap the mouse buttons on my non-Microsoft with Microsoft Mouse and keyboard Manager installed mouse?

  Thank you

  C.C.

  To get all the benefits of Mrs Maes & Bishop, you can buy a MS mouse is compatilble with the Manager, MS software is for devices of Ms and it is unlikely that MS will change their software to accommodate mice made by other sources.

  If you want to keep the Dell mouse, you will need to disable MS M & K Bishop.

• After a clean install of Windows Vista, Intel Wifi card is installed and activated, but does not detect the network.

  Wireless card not working after a clean install of Windows Vista

  I did a clean install of Windows Vista Home Premium on my HP Pavilion of 32 bits. I've completely updated Windows via Service Pack 2. Given that the clean install, my wireless card, Intel (r) Wireless WiFi Link 4965AGN, was not able to detect all the networks. The Wifi card is listed under NICs as being installed and activated. the hardware on my laptop Wifi switch is set on "on" and the light is blue, indicating that the card is working.

  I can connect to the internet if I connect physically my computer to the modem with an ethernet cable wireless, so the modem isn't the problem. Other computers can connect to the wireless modem, so my Wifi modem functionality is not the problem. The problem with my computer.

  I tried to uninstall the Intel driver and reboot my computer with the generic driver. Install the driver generic, but my wireless card has not always worked. I then ran an update of windows, nothing helps.

  I tried to install the "Intel® PRO /? Wireless and WiFi Link"drivers for Windows Vista (32-bit 13.1.1.1 the latest version and the previous version 12.4.4.5 32-bit) for the Intel® Wireless WiFi Link 4965AGN directly from the Intel Web site at http://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Wireless+Networking&ProductLine=Intel%C2%AE+WiFi+Products&ProductProduct=Intel%C2%AE+Wireless+WiFi+Link+4965AGN. The map didn't always work with a driver.

  In addition to the pilots, I also downloaded a tool of diagnosis of Intel (Intel® PROSet /?) Utility of WiFi wireless connection for Windows Vista 32 -? Bit). Said diagnostic tool the WiFi card is not installed or enabled, however, Device Manager maintains that he is also installed and active.

  Is there a problem that causes Device Manager to say that all is well with the card, but does not map to realize that they diminish the radio signals? Everything's fine, diagnostic, it just does not detect networks around him. Help, please.

  Hello

  The on/off switch actually works?

  Since it is an internal adapter to ensure it is enabled in the settings of configuration/F2 (BIOS/CMOS) often like you
  Start - so look at the screen.

  Have you tried the computer on other WiFi networks? You had a WiFi type problem before the
  Re-install of Vista?

  ---------------------------------------------------------------------------------------------------------------------

  Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
  Update your WiFi drivers on computers. How you are positioned in the router? Are there
  obstacles in the path?

  Actually try updating your driver and disabling the network logon.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Export or save the settings Microsoft Mouse and keyboard Center

  Hello

  I use the MMKC on Win7 and I intend to upgrade to Win10.

  Rather than migrate to 10 keeping the existing mess, I would like to get a new installation by reinstalling and then 7 to 10.

  I don't see an option to export the settings in MMKC? I found the folder Documents\Microsoft Hardware\Macros

  containing macros MHM but not the reallocation of the shortcut key.

  Do I have to export the registry settings or y at - it an easier way? Thank you.

  Devin

  Hey Devin,

  According to the description of the problem, you are ready to export the Microsoft Mouse settings and keyboard Center. I suggest you to return the article mentioned below and see if it helps you to solve the problem.

  How to share and import macros?

  Hope that the information provided is useful. Let us know if you have any concerns related to Windows. We will be more than happy to help you.

  Kind regards

• How can I connect to the internet? Problems involving the network and sharing Center does not.

  Hello.
  I live in a House and bought a range extender so that I can get a connection in my basement as well.  I have installation range Extenders without problem.  When you install the range extender, I changed my name to my network router.  I changed the name of the network by typing 192.168.1.1 in my browser.
  The MacBook connects without a problem.  In the basement, the connection of Windows 7 works very well.  I have just connected Vaio Windows 7 my mother to the network, but it prompted that I enter the user credentials.  I read a post above and got that problem solved by opening the network and sharing Center and adding a new connection.  Now that the connection is configured correctly.
  The problem is with the laptop HP Windows Vista family basis.  Since I install the range extender, I can't connect to the network.  He had no problems before you connect the router or other networks to visit other places.  The new network name appears, but when I click it, it says I have to enter the user credentials.  I tried to manually, but the name is taken so I can't make a new and invites me to connect to the network that is established or to connect to a different network.
  • I tried to open the network and sharing Center, but it does not open.  When I click it, it opens a screen for a brief second.  The option "Display the status of network and tasks" opens either.

  • I logged as an Administration by entering the command line < net="" user="" administrator="" ctive:yes=""> > and restarted the laptop.  Even logged in as administrator, this folder does not open.

  • I also did a scan < sfc="" cannow=""> >.  The digitized rolled up with an error, but the error has been corrected.

  • I also updated the connection of the range extender.

  Why the network and sharing Center will not be open to the top?
  How can I configure my router my HP Windows Vista Linksys connection?
  Thank you.  Please let me know if you need more information.

  Thanks for your reply.

  In a last attempt, my sister has used the ethernet cable to connect directly to our router.  Next time, she turned on her laptop, she managed to connect to our wireless network and she was not invited to enter credentials.
  In this case, the manual connection helped solved the problem.