Mouse and keyboard Center shows only the keyboard settings

Similar Questions

• Trackball Explorer not included in the center of the mouse and keyboard 2.2.173

  All versions of the center of the mouse and the keyboard (by 2.1.177) have included support for trackball Explorer.  MS site shows that it is a device that is supported for mouse and keyboard Center, but the current version 2.2.173 is a template for the trackball Explorer and device file is no longer appears in the central screen of the mouse and the keyboard.  What gives, and when it's going to be fixed?

  Just noticed this myself after Windows Update has given me a new version of the center of keyboard and Mouse - Trackball Explorer is most recognized that unlike that suggests the Web site.

  Have had to reinstall IntelliPoint 8.2 until this has been resolved...

• How can I swap buttons of the mouse on a--no Microsoft Mouse with Microsoft Mouse and keyboard Center? (I have a Microsoft keyboard).

  I did a new install of Windows 8 on my Dell desktop computer that has a keyboard, Microsoft Natural 4000 and Dell's USB mouse.  Windows 8 Microsoft keyboard recognized and automatically downloaded and installed Microsoft Mouse and keyboard Center version 2.0.162.0.  However, I'm a lefty mouser and installation of the MS mouse & keyboard Center back on my right handed mouse buttons.  (I went to control panel |) Mouse and swapped buttons immediately after installation.)  When I went into the control panel. Applet of the mouse and the keyboard and mouse Center had resumed the first tab of the control panel mouse properties, stating "click here to change the settings for the Microsoft mouse.  This is the tab where the "Swap mouse buttons" is usually.  When the mouse and keyboard Center is launched, it offers only options for the keyboard.  Do I have to abandon my Microsoft keyboard or purchase functions go a Microsoft mouse to get exchanged my mouse buttons?

  How to swap the mouse buttons on my non-Microsoft with Microsoft Mouse and keyboard Manager installed mouse?

  Thank you

  C.C.

  To get all the benefits of Mrs Maes & Bishop, you can buy a MS mouse is compatilble with the Manager, MS software is for devices of Ms and it is unlikely that MS will change their software to accommodate mice made by other sources.

  If you want to keep the Dell mouse, you will need to disable MS M & K Bishop.

• After the update to el Capitan my iMac will not be asleep. I put it to sleep and turn off the mouse and keyboard that goes with it, and 5-10 minutes later, he wakes up on his own. Now, I have to stop it after use and each time only. Major pain

  After the update to el Capitan my iMac will not be asleep. I put it to sleep and turn off the mouse and keyboard that goes with it, and 5-10 minutes later, he wakes up on his own. Now, I have to stop it after use and each time only. The Major pain. Any help would be greatly appreciated.

  Please test after taking each of the steps that you have already tried:

  Step 1

  Take all of the measures suggested in this support article, including those under the title "If the previous steps do not work." It is the starting point for a new effort to solve the problem.

  Note that, as stated in the article, the computer will not sleep, if some sharing services are enabled. In the menu bar, select

   ▹ System Preferences... ▹ Sharing

  Disable all sharing services.

  Step 2

  If sharing music iTunes home sharing is enabled, disable it or quit iTunes. Do the same with third-party applications that have a similar feature.

  Step 3

  Select

   ▹ System Preferences... ▹ Accessibility ▹ Speakable Items: Off

  Step 4

  Select

   ▹ System Preferences... ▹ ▹ Advanced Bluetooth...

  and uncheck the two boxes marked

  Open Bluetooth Setup Assistant at startup if...

  Step 5

  Reset the printing system.

  Step 6

  Back up all data.

  Triple-click on the line below on this page to select, then copy the text to the Clipboard by pressing Control-C key combination:

  /var/vm

  In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

  A folder named 'vm' should open. Inside, there may be a file named 'drag '. Move this file and only this one in the trash, but do not yet empty. You will be asked for your password. Close the folder window.

  Restart the computer and empty the trash.

• Bluetooth Arc touch mouse without being detected by the "mouse and keyboard Center."

  The mouse is paired with your PC via bluetooth and works very well.  (Please re-read that last sentence before you send information on how to pair.)

  However, when I open the Microsoft Mouse and keyboard Center, it says "no device detected".  For example, I can't change the settings of the mouse. There are the most annoying rattling noise that I would turn off.

  Have uninstalled Microsoft Mouse and keyboard Center, reinstalled latest version. IM using windows 7.

  Hello Frazer,

  We want to get this support, please follow the steps on how to solve Microsoft Mouse and keyboard issues:

  1. run the hardware store in Windows 7.

  2 steps on how to install the driver in compatibility mode:

  a. do the driver installation file right click and select properties and then tap or click on the Compatibility tab.
  b. check run this program in compatibility mode.

  c. press or click the menu drop down and select a previous operating system, and then tap or click OK.
  d. try to install the driver and verify.

  Let us know how it goes.

  Kind regards

• The link to support Microsoft Mouse and keyboard Center appears broken

  I downloaded the last Microsoft Mouse and keyboard Center (version 2.7.133.0 on Windows 7 64 bit). [This now supports Excel with the ergonomic mouse Sculpt, thanks!] I noticed that there is a support link that is supposed to take you to the "Microsoft Hardware Support Page.

  When I selected, it opens http://go.microsoft.com/fwlink/?LinkID=259866 which seems to be a broken link. Is anyone else seeing this?

  BTW, it should really be a more easy/obvious way to report this bug, but I couldn't find a (another using telephone support, I guess, but that seems silly). Perhaps it is the location of the broken link? :-)

  Hello

  Thanks for the update on the issue.

  This seems to be a problem of compatibility on the Internet Explorer 11, sometimes this can be corrected by adding the site to your list of compatibility view.

  Difficulty of the problems to view site with compatibility view

  http://Windows.Microsoft.com/en-us/Internet-Explorer/use-compatibility-view#IE=ie-11

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

  _______________

  Thank you best regards &,.

  Isha Soni

• Mouse and keyboard not working only not with the ERD in Windows 7 and Windows 7 install disc

  I have a Dell XPS 8700.  I just did an upgrade to an SSD.  The DSS started once with no problems, then it wouldn't start.  I get an error message 1 MBR.

  If I do a F12, I am able to boot from the SSD drive and everything works fine, but if any process requires a reboot it will not work.  IE, windows update that requires a restart does not update because it cannot restart.

  To fix the MBR, use either the repair or install disk to get to the command line.  I have two drives and when I boot with them I get the initial screen of language/keyboard and mouse and keyboard do not work.  I have the keyboard and mouse installed in USB 2.0 ports, their was also in 3.0 ports with the same results.  They work fine until the disc over to install the files, and then they die.  I tried 2 different sets of keyboards and mice with the same results.

  I also tried to use the Dell recovery disk and it did find and supposed to solve a problem when I ran in the beginning.  But I still get the MBR error.  The disc is represented and it did not find any problems and I wanted to reinstall windows back to the factory.

  Suggestions as to how to get my mouse and keyboard work again with the repair and install discs would be greatly appreciated.

  Hi Navneet,

  Thank you for responding.

  Did you change the computer other than the upgrade to an SSD?

  Yes, I have, but that was before the SSD.  I upgraded the video card and added a 1 TB of HARD drive data.

  What is the complete error message you get on the MBR?

  The message reads as follows;

  "MBR 1 error.  Press any key to boot from floppy. »

  There is no floppy drive installed and I even tried to start with only the connected SSD.

  Are you an error code?

  No error code.

  As for changing the BIOS, I am not satisfied with messing with the BIOS, if this isn't an option.

  After thinking about this problem, I think that Dell has disabled somehow able to use disc repair/install "Windows".  I say this because they have disabled the ability to create a disk to repair Windows out of the Dell system and cannot create a Dell recovery disk.  Also because Dell has changed the MBR it wouldn't do any good to reset the MBR to the default value of Windows and the Dell recovery disk does not give you the ability to recover the MBR manually only.

  I decided that the best option was to do a clean reinstall of the OS, and that's what I did.  Everything works great for now.   It is a PITA, but nothing that I have not done before.

  Thanks again for your help...

  Mahalo,

  DEX...

• Microsoft Mouse and keyboard Center 2.3.188.0 is not Exchange buttons of the mouse correctly with Windows Remote Desktop

  I use Microsoft Mouse and keyboard Center for years with no problems. For example, version 2.2.173.0 worked well. I use Windows 7 Professional 64 bit.

  I swapped the buttons on my Comfort Optical Mouse 3000 (so that the right button's "click" and the left button displays a context menu, for example). When I connect to a remote computer, traded buttons continue to operate as programmed.

  Just set Windows Update to update my mouse and keyboard Center to the 2.3.188.0 version. Now when I use the Windows Remote Desktop to connect to another computer that is running Windows 7 Professional 64 bit, my button is not honored. In other words, on the local computer, the right button of the mouse is 'click '. On the remote computer, the left mouse button is 'click '. The keys are reversed on the local computer, as I have it configured, but not on the remote computer.

  I called Microsoft and was transferred to various departments. I would like to report this bug, although I have to pay out of pocket, but there seems to be no way to report this bug.

  Is there a way to report this bug to Microsoft? Is there a solution? How can I revert to a previous version of Microsoft Mouse and keyboard Center?

  I suggest to perform a restore of the system to a restore point before the update.

  You can also uninstall the keyboard and the mouse Center programs and features.

  Then, go to this site and download the previous version.

  (I couldn't find any previous version on Microsoft sites, but I checked the file hash values, I downloaded Microsoft previously).

  MD5: 4a2fb26c01d96b25487735da2925f89a

  SHA1: a68199c29a840dc8719c7f644ae14a4b138f65e7

  http://www.userdrivers.com/keyboard-mouse/Microsoft-mouse-and-keyboard-Center-2-2-173-0-for-Windows-7-8-x86-x64/download/

• Mouse behaves badly after the update MS Mouse and keyboard Center

  I use a model wireless MS Mouse 4000 and MS Mouse and keyboard Center 2.1.177.0 worm installed.  Since this update the scrolling behavior does not work correctly.  In a particular program (a simulation game), scrolling works much too fast.  If I go into the centre of keyboard and mouse and adjust the scrolling speed, it works well.  But when I restart the previous settings seem to be lost, so I have to put once again.  I use Win 7-64 bit.  The mouse worked fine before the 2.1.177.0 version.  Any suggestions?  TIA

  PS I vaguely recall a default update but can find no trace of that.  Running MS Mouse and keyboard Center seems normal.  There is no obvious command 'save settings', so I guess it does it automatically.

  Paul

  Hi Paul,.

  Thanks for posting your question on the Forums of community of Microsoft.

  Check out the link and follow the steps in the article:

  Troubleshoot the incidents of the response to the mouse or wireless keyboard

  http://support.Microsoft.com/kb/838398#appliesTo

  See also:

  Mouse, touchpad and keyboard with Windows problems

  http://Windows.Microsoft.com/is-is/Windows/help/Mouse-touchpad-and-keyboard-problems-in-Windows?T1=tab05

  Check out the link and check the number of the update has failed.

  See the Windows updates are installed

  http://Windows.Microsoft.com/is-is/Windows7/see-which-Windows-updates-are-installed

  If you are able to get the number of the update failed, try to install the updates manually.
  Reference:
  http://www.Microsoft.com/en-us/download/default.aspx

  Hope this solves the problem.

• How do we uninstall Center microsoft mouse and keyboard when I can't find the entry so that it doesn't matter where

  I tried to install Microsoft and center mouse keyboard or intellipoint may I use one of my Microsoft Mice. They are both wireless and when I tried to install the center of the mouse and keyboard, I got a prompt that he neede to be uninstalled before it could be reinstalled. That's fine, but the entry is not found in the directory or the start menu. Same thing with the Intellipoint. A States there already an installed updated version or a previous version installed and must be uninstalled before you can reinstall. It's also the not found in programs and features or the directory or the start menu or the Program Files folder... You feel me again? How can I uninstall if I can't? I used the Microsoft fix - it for install and uninstall, but it asks for a code of product number 38 of the center of the mouse and the keyboard in order to uninstall. I am at a loss as the way which these uninstall at least that I get directions to the registry uninstall or the product code so it is possible the MS Fix - it.

  Hi, Julio99,

  Don't you see not peripheral compatible HID in one of these places?  Look in the Device Manager, programs and features/uninstall programs

  Have you used this MSFixit?

  Run the fixit and check.

  Solve problems with programs that cannot be installed or uninstalled

• Sculpt the Touch Mouse: mouse and keyboard not fully functional Center

  I bought and installed a Microsoft Sculpt Touch mouse. The Strip in the center of the mouse has three buttons by default assigned to the previous Page, click Middle and Page Down. I installed the mouse and the keyboard Center (v 2.3.188.0) to reassign these buttons but it allows to assign the button in the middle of the band. How can I redirect the other two buttons?

  Documentation for the mouse and the keyboard and mouse Center also says that I can assign macros to keys, but the mouse and keyboard Centre does not appear to include these options. How can I assign macros to my mouse keys?

  Thank you
  Tony.

  Hi Tony,.

  Thank you for the update on the question and sorry for a delayed response.

  If after reading the article you don't how how to reallocate the PageUp and PageDown button on the median strip, then in this case I suggest you get in touch with support of Microsoft Hardware team.

  Keep us updated on the issue.

  Kind regards.

• Mouse and keyboard not working only not to the login screen

  Hi, I was recently infected with Antispyware Soft virus. In my attempt to remove it, my screen went black, so I had to restart my computer. Entering my login screen, I was unable to connect because my keyboard and mouse no longer works. I tried to start the safe mode too and they still do not work on the login screen. However, they work at the start of the BIOS. I looked around, but I couldn't find any option for Legacy USB drivers. I went to a few USB option and select [Enabled] and it still doesn't work to the login screen. I have no PS2 port, so I can't try it. I was also able to use my mouse and keyboard when you attempt a repair of the system to do a system restore, but that solves nothing. I am at a loss what to do. I hope someone is late, as I'll be gone tomorrow/more day late today. I am writing a computer laptop and unable to remember any care my office except the fact, it's Windows Vista.

  Hi HellMuT1,

   
  We recommend to use a different mouse and keyboard, then check the result. If the problem persists, try the following steps.
  1. Insert Windows Vista DVD.
  2. restart your computer.
  3. let the computer restart (boot) from the DVD.
  4. If you are prompted, press a key to continue.
  5. When you reach the screen install Windows, select your preferences in the language to install, time and currency format and keyboard or input method boxes, and then click Next.
  6. do not click on install now. Instead, click on repair your computer. The System Recovery Options dialog box appears.
  7. make sure that the appropriate operating system is selected, and then click Next.
  8. After you click Next, the System Recovery Options menu appears.
  9. click on command prompt.
  10. type devmgmt.msc and press enter
  11. on the window Device Manager, in the object list, expand mice and other pointing devices.
  12. make a right click the sub element and click on uninstall.
  13 expand keyboards.
  14. make a right click the sub element and click on uninstall.
  15. Type exit and press ENTER to restart the computer.
  16. remove Vista DVD and restart the computer to see if the keyboard and mouse works fine.
   
  Do the repairs to the system of Windows recovery environment
  I hope this helps.

   

  Kind regards
  Syed - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Can't install/uninstall Microsoft mouse and keyboard Center!

  Hi, I got problem with the Microsoft Mouse and keyboard Centre because he doesn't identify my touch mouse correctly (classified as a HID-compliant device and not by its name as my Sidewinder X 4 keyboard). I uninstalled from Add/Remove Programs, and I also uninstalled the drivers for my mouse AND my keyboard (because it showed a double receiver device in device manager). I restarted my computer, but when I tried to install the drivers again in the process of installing mouse and keyboard I got an error message telling me that it was already installed. I uninstalled it again (the "ghost" of it is still listed in Add/Remove Programs) and restarted. When I tried to reinstall, I got the message again who told me that it was already installed. This is when strange things began to happen. The program was once again listed in Add/Remove Programs (this time with its icon and not only a "ghost"). I tried uninstalling and received a message telling me that the uninstall process could not be met because some the original installation files have been corrupted or missing. But now, the program has been listed in the Windows Start menu and when I double click it it started an installation process ceased to immediately resume a message that mkc.msi was missing from a temporary file to My Documents, and he could not proceed, so now I can't install or uninstall the cursed thing. I tried to restore my computer but it doesn't solve all problems. I suspect that some registry entries are not deleted properly when the first uninstall process. I don't want to mess with the registry by myself, at least not until I know what registry entries are created by and in connection with the program. Any help would be appreciated.

  Thanks in advance

  Hello spmisik,

  Thank you for the question!

  I'm sorry to know that have problems you with Microsoft Center of mouse and keyboard. As I understand well you can't install/uninstall Microsoft Mouse and keyboard Center.

  I need to ask you some questions to help you best.

  1. the problem persists with a particular application?

  2. were there any changes (hardware or software) to the computer before the show?

  Run the fixit and check.

  Solve problems with programs that cannot be installed or uninstalled

  Answer to us if you are having problems with Microsoft Mouse and keyboard Center or any other issue of Windows, and I'd be happy to help you again and try to correct the problem as soon as possible.

  Good day!

  Hope this information helps.

• How to remove Microsoft Mouse and keyboard Center?

  Hello, I look at a log of the events, and I noticed that there was some sort of error with the keyboard. Recommended action was to remove the driver and reinstall. So that's what I did. I have a Microsoft Comfort Curve keyboard 2000. Once I deleted the driver, then I tried to reinstall the driver which is bundled in a package called Microsoft Mouse and keyboard Center. After downloading and extracting, invites a mistake: "this version of the software is already installed on this system. To re - install this software, you must remove it all first, and then rerun Setup from the installation media. For more information about removing a program, see Windows Help. "So, naturally, the first thing I did was look for an uninstall. Hmm, nothing to add or remove programs, there is nothing in the folder of the Start Menu. So the only other thing I could think to do was to delete the files in the C:\ directory, I did. But still, after trying to reinstall this driver, I get this same error. Will you please tell me how to remove this software from my computer, so I can reinstall it, so that I can use the good driver for my keyboard instead of ' HID Keyboard Device. Thank you.

  Hi, I thought about it. Or, at least, I understood how to uninstall. It turns out that Microsoft Mouse and keyboard Center is in Add or remove programs, you just need to search to find it. And I uninstalled. So, I'll just reinstall and go from there.

• is there a single mouse driver to carve microsoft ergonomic mouse? The "Mouse and keyboard Centre 2.3" driver/software is not compatible with my other keyboard...

  Hello!

  So I went on the microsoft Web site to download the software/driver for my "Microsoft sculpt ergonomic mouse", but is the only driver/software they listed the "mouse and keyboard Centre 2.3", which seems to be for their mouse and keyboard...» I tried to install, but after installation than my other brand non-microsoft (mark i-rocks) 2.4 ghz wireless keyboard Connect is more to his receiver and I am unable to use the keyboard. I tried resynciing and everything but nothing works only as long as this "keyboard and mouse center 2.3" driver/software is installed, so now I have to uninstall that and just use the regular driver for the "microsoft sculpt ergonomic mouse" I have, so I can use my keyboard...

  I want to know, is there another older version of mouse only driver/software that I can use with my "ms sculpt ergonomic mosue?  Maybe the latest intellipoint mouse driver would work? What is the latest version and how to find?    or only the "keyboard and mouse Center 2.3" works with this mouse?  so in this case, I have no other choice than to use the generic mouse driver?

  Thanks in advance for the help!

  lendbz

  I finally thought to it. Apparently, when you install the software/driver "Mouse and keyboard Centre 2.3" for the "mouse sculpt ergonomic microsoft", it will install both the driver for mouse and keyboard correspondence pilot as well, even if I only have the keyboard.  I tried this software even with my old microsoft natural wireless laser mouse 7000 and time that he installed only the mouse driver. I'm guessing that the nano-receiver for the mouse ergonomic sculpt can receive both the ergonomic keyboard and ergonomic mouse? .

  If the software installed one "microsoft USB dual receiver Wireless Mouse" under "Mice and other pointing device" in the Device Manager and a "receiver double USB microsoft wireless keyboard' under 'keyboard '.  What I did is simply to go into the Device Manager and uninstalled the driver "microsoft USB receiver double wireless keyboard" and check the box to "delete the driver for this device" so that the keyboard driver will not return and be a pilot and leave just installed microsoft mouse, so now I don't have that the "microsoft USB dual receiver Wireless Mouse" and the generic driver keyboard "HID Keyboard Device" in Device Manager to the the microsoft place unwanted, one, now I can go ahead and install any brand wireless/wired keyboard and the microsoft keyboard driver no longer interfere with it.