mouse and keyboard do not work when you install windows 8 on MacBook

Try installing Windows 8.1 in Bootcamp on MacBook retina 12 "Early 2015.  Created .iso .iso copied & Windows Support software for flashing the drive using Bootcamp Assistant.  Created partition and Windows 8 install starts. The first Setup screen opens etc. language selection display, however, the keyboard, trackpad, or mouse will work so not able to click 'next' to install full.  Anyone?

1. are you ACO invites you to create Setup from USB? How many options you have on your main screen of the BCA?

2. Please see https://help.apple.com/bootcamp/assistant/6.0/ for the process.

Tags: Windows Software

Similar Questions

  • Mouse and keyboard do not work after you have connected the iPod

    I don't have in my possession this maching XP yet as it is my niece.

    When it has connected his iPod, the configuration and the keyboard work more fully. Start in safe mode did not help, she said.

    Any suggestions for when I'll be at the computer?

    Thank you

    Hi dux.

    You can check what are the other USB devices on the computer.

    Often when there is a failure in one device in the USB chain, it can prevent the operation in other USB devices.

    You can try the iPod in another USB port on the computer.

    You can also remove a powered hub if one is connected between the device and the computer.

    Chris
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Keyboard does not work when I start windows

    my keyboard does not work when I boot my laptop.   When I do any changes inside through properties keybord (even the spped blinking cursor) he started working. but when I press capslock, it stops working again and I have to still to change the settings in the keyboard properties to make work.i have tried to install the new software, I got my laptop to format but it still does not.

    need help with this and please tell me the solution if r there all

    If by "I got my laptop to format", you mean you have reinstalled Windows and the problem persists, it is probably a hardware problem. If you have a keyboard that can be plugged into your laptop, there the same problem?

  • Trackpad and keyboard does not work after upgrade to Windows 10

    Trackpad and keyboard do not work after the upgrade to Windows 10 in Boot Camp on a MacBook Pro in early 2011. So, I'm unable to enter password. How to connect? Can I go back to Windows 8?

    1. you can turn off your Mac and your power it back up and hold the Alt/Option key.

    2. you can also run the following procedures to restore the OS default.

    3. If you use a Mac 2010 to run W10, officially Apple does not support the combination. Older than 2012 Mac is not supported for the W10.

    4. Please see also Boot Camp: the operating system default value .

  • When I work on my sys after every 15 min to 20 min my mouse and keyboard does not work

    Hi all
    Please can someone give me a good answer

    When I'm working on my sys after every 15 min to 20 min, my mouse and keyboard work not and totslly my sys cling...

    Hi Suresh,

    Thanks for posting your query in Microsoft Community.

    According to the description of the problem, it seems your keyboard and mouse stops working, and also Windows 7 crashes.

    I will certainly help you in this matter.

    1. What is the brand and model of your computer, the keyboard and the mouse?

    2 have had any changes made to the computer before the show?

    Please follow the methods.

    Method 1:

    Run the troubleshooter from the link.

    http://Windows.Microsoft.com/en-in/Windows7/open-the-hardware-and-devices-Troubleshooter

    Method 2:

    Update the drivers for the keyboard and mouse.

    Updated a hardware driver that is not working properly

    http://Windows.Microsoft.com/en-in/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

    Method 3:

    Follow the steps in the link.

    Crashes Windows or freezes

    http://support.Microsoft.com/kb/2681286

    Using the windows-related issues feel free to post on the Microsoft Community Forum.

  • sound buttons on my mouse and keyboard do not work

    My volume keys on my keyboard (winder aside microsoft x 6) and my mouse (logitech G9) does not work, I reinstalled it drivers but they do not seem to work (they use to work fine)! I tried Googling the problem but stil no response! mute my button on my keyboard works but will not work the volume up and down! someone knows how to solve this problem!

    Hi barry1980,

    Thank you for visiting Windows Vista Microsoft answers forum.

    You can perform a system restore on the computer to a date where the keyboard volume control button and the mouse was working fine. In addition, you can try to check with another keyboard and a mouse.

    To restore the operating system to an earlier point in time, follow these steps:

    1. Click Start, type system restore in the search box, and then click System Restore in the list programs.
    If you are prompted for an administrator password or a confirmation, type your password or click on continue.

    2. in the System Restore dialog box, click on choose a different restore point and then click Next.

    3. in the list of restore points, click a restore point created before you started having the problem, and then click Next.

    4. click on finish.

    You can visit the link to the KB Article for reference:
    http://support.Microsoft.com/kb/936212

    You can also uninstall and reinstall the keyboard device driver.


    Uninstalling and Re installing keyboard driver from Device Manager:

    1. open Device Manager:
    Click the Start button, in the start search box, type devmgmt.msc and press ENTER.

    2. in the Device Manager, on the left hand keyboard, click the PLUS (+) symbol.

    3. under the keyboard, right-click on the Microsoft Keyboard to display the menu drop down.

    4. in the drop down menu, click on uninstall.

    5. in the dialog box confirm the device removal, click the OK button.

    6. restart the computer and then install the Microsoft Keyboard driver.

    Please let us know if it helps.

    Thank you and best regards,
    David

  • Wireless USB mouse and keyboard no longer works when disconnected and then reconnected. Cannot connect to system to be solved.

    I am facing a problem on my XP machine.  Here is what happened...

    I unplugged all devices and USB keyboard and mouse USB in order to move to another office.  Then I put everything back in place, then started my machine.  Mouse and keyboard not responding do not, so I can't connect it to resolve the issue.  Tried in safe mode without success.  My mouse and keyboard are made from Microsoft and are wireless.  Unsuccessful despite everything I try.  Any ideas?

    Hi Nascarfan48,

    Thanks for the update. We recommend that you check if this article helps you fix the current number:http://support.microsoft.com/kb/258826

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • User and password do not work when you try to download the new Flash!

    I can't download the new Adobe Flash Player because my username and password do not work.  I changed and tried again without success.  Please tell me what I'm doing wrong!  Adobe Flash is not taken in charge by the Adobe customer service and their 800 number does not work correctly.  I can't view my Jacquie Lawson e-cards and play games.  Thank you!

    First of all, download, it's what you do to transfer a file FROM your computer TO a web site... I think what you mean is that you have a problem with INSTALLING a program

    When you install or update, it's PROBABLY your operating system for you to prove that you have by asking your COMPUTER, not your Adobe https://forums.adobe.com/thread/2139902 password password

  • his quick launch button does not work when I installed windows 8 in my computer hp laptop pavilion dv3z

    1. number and product name
    laptop HP pavilion dv3z

    2 operating system installed (if applicable)
    Windows 8

    3. All changes to your system until the problem occurred
    installed windows 8

    When I installed windows 8 in my pc laptop hp pavilion dv3z, the quick launch of the volume button is always red and the sound is mute... the driver for quick launch buttons and pilot for the sound is also up-to-date... can you help me please?

    When installing the audio driver, it installed following the instructions or mode of compatibility as shown here?

    Based on the software and drivers page for this device, the device was not tested and certified for Windows 8.  This means that some features may not be the same as the device was not designed for Windows 8.  See this site for more information and to find out if it has been tested for Windows 8.

    If the audio driver has not been installed in compatibility mode, I recommend using the 64-bit Windows 7 found here driver and using the related steps above to install in compatibility mode.

    Let me know what happens.

  • Satellite A100 - line number on the keyboard does not work when you enter the password

    I have an A100 / Pro A100 series satellite laptop, what ever that means.
    Anyway, when you turn the laptop on and asked for a password, I am unable to put in number.
    It appears to the integer line, including BACKSPACE don't work.

    I can use the mouse to select and remove, but that leaves a mark of character in the password box.
    Other buttons work except the row number.

    If I need to connect an external keyboard to verify where I connect (if I can)?
    Any help would be great.

    Can I change the keyboard?

    Hello

    trying to connect a keyboard external usb to check it out. Yes, you can change the keyboard of laptop and it is not a complicated procedure.
    Details how to change keyboard, you can find here

    irisvista.com

    Welcome them

  • Qosmio G30-163 mouse and keyboard does not work properly

    Hi all

    I installed an update of the firmware of the toshiba site. I think that the upgrade was for the dvd but am not sure. I just saw an available upgrade and installed. Stupid of me. The dvd drive has been previously not recording. If after installing the update of the firmware I has not restarted the machine. In the meantime, I forgot the upgrade and then I did to fix the error of dvd

    "Start the Registry Editor (start, run and type regedit and click on).

    Search for "UpperFilters" and "LowerFilters" (and "UpperFilters.bak" "LowerFilters.bak", if they exist) value under the following key in the registry and delete it:

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    Exit the registry editor.

    Reset. »

    Now, after restart the keyboard and the mouse does not work. I can't go in safe mode because I can't press ok for the user login screen. I have attached an external keyboard, but it still does not work.

    I use windows xp, I have a lot of data. I can't do anything. If anyone has any idea please help me. The laptop is out of warranty. I'm stuck. Help, please.

    John

    S rally strange because I put t see a link between the firmware CD/DVD, UpperFilters and LowerFilters and the keyboard and mouse.

    This is first time that a removal of the upper and lower filters would undermine the functionality of keyboard and mouse. Which is really strange.

    Anyway, you are able to access the BIOS? If this isn't the case, then this is not good.

    First of all, you should try to save the data stored on the HARD disk in this case, I recommend to remove the laptop HARD drive and connect it using a USB HDD on another controller.
    This would allow you to save the data to another HARD disk.

    Put the removed HARD disk in Notepad, and then try to reinstall the OS from the Toshiba restore CD.
    I hope that this will be possible because I don't see another way to get the operating system again.

    Good luck by a friend

  • Mouse and keyboard does not work after sleeping on a laptop

    After awakening from a sleep of my laptop, my keyboard and mouse went crazy, pushing buttons at random on the screen, beep and completely freeze then both. I restarted my computer and got to the login screen which I was able to type in, then he connected and the keyboard and mouse do not work. I plugged in a USB mouse and the mouse that works very well. After some playing around, I got the keyboard works by accessing the control panel and change the speed at which the keys type and for some reason, this fixes the keyboard. However, I am still unable to get the mouse works.

    So three questions, 1 - what happened in the first place? 2 - why my keyboard was working to connect, but not once it really connected? 3. How can I get my mouse back?
    Thank you!

    Hi NicoleWood,

    You can read the folloaing articles and see if it helps.

    The problems of wake the computer from sleep mode

    How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista

    Hope this information is useful.

  • Mouse and keyboard do not work at the login screen?

    Model: Dell Dimension E521 Windows 7 Ultimate
    My PC has no PS/2 slot.

    The keyboard and mouse work through the BIOS and everything until windows starts.
    Once my PC arrives at 'Starting Windows' screen, my keyboard and mouse stop working. (Their power lights and indicator goes out to Midway through the 'Starting Windows' screen)

    They do not work in safe mode, and I've already restored my PC before the problem of return to.  I tried most of the system repair options in the CD (they work here).  Nothing wrong with the hardware or start.

    May I ask if there is a way for me to restore the registry files and drivers without a clean cloth and do a reinstall customized windows 7?

    EDIT UPDATE: YES! Well, I finally got my PC in safe mode with work keyboard and mouse. I had to restore it when the keyboard and mouse worked always, then to restart and login. Once I connect I force shut down the computer before the keyboard and mouse stop working (peripheral installation failure). Then I run my PC in safe mode and it works.

    Currently back up my files, what should I do now to solve the problem? 1 AM edit: the issue has been resolved after much turmoil. It turns out that the keyboard and mouse working again now that I restarted my PC normally out of safe mode.

  • How to fix this upgrade Windows 8.1, my mouse and keyboard would not work after the upgrade

    Good day, I recently updated my OS to Windows 8.1 from the store windows, at the end of the upgrade, I discovered that the keyboard and mouse to my laptop did not work again. I use a HP Pavilion 17, came pre-installed with Win8 and I don't really know how to solve this problem. I restored back the system to a previous date when it was working, at least to allow me use my PC but I get notification of upgrade HP. How can home, I solve this problem?

    Go to the HP support website and search for drivers Windows 8.1 for your specific model number. Also check the recent updates of Windows 8 pilot even if your PC came with Windows preinstalled 8.
    http://welcome.HP.com/country/us/en/support.html

    J W Stuart: http://www.pagestart.com

  • T440s - keys alt and space do not work when you press the up and left arrow

    Hi all -

    I just got my T440s a few weeks ago and I love it. I just discovered a weird problem: both alt keys and the space bar don't work when holding the up arrow and left the keys simultaneously. I discovered this while playing a racing game. As holder until left and arrows, by pressing the alt key or the space bar to have no effect, and the laptop makes a sound 'blip '.

    All other keys seem to work all by holding + arrows left and rising + right arrow key does not change a thing.

    I looked at the ease of access settings (I have Win7 Pro 64) and turns off all filters, sticky keys keys, etc. I use the latest version of the BIOS, if that's any help.

    It's a little boring, so I'd appreciate any help. Thank you!

    https://en.Wikipedia.org/wiki/Rollover_%28key%29#Key_jamming_and_ghosting

    Will probably not not to be repairable. Recommend rebind the keys for a game of combinations work.

Maybe you are looking for

  • Lost my sound just after hibernation of the Satellite

    Hello forum,. I lost my sound just after my computer in hibernation.I did a google on the issue and people have said that it his mixer and/or driver disappeared. In my case, but I can still access the console and windows says that my audio driver is

  • Satellite A50-110: MOVING USERS

    I bought this Satellite A50-110 9 May 2005 in Dammam, Saudi Arabia. Last week, I created the additional user. When I move from the original to another user, the computer CRASHES with unconfortable noice and I have to restart again to use the computer

  • DeskJet 3070

    Hi all, my Deskjet 3070 has stopped printing via ePrint, "internal error." I changed from a dynamic address to a static address and now ePrint is completely disabled. have uninstalled and reinstalled the drivers but it still picked the static address

  • 64 GB Cruzer Glide needs formatted - reformatted only to 1 GB

    We used our two 64 gb Cruzer flash slides to back up our DVR before he died, and they DVR then reformatted to any file system is necessary. After we had put the files on our new DVR, I went to reformat two readers flash for Windows to use. We run Win

  • No sound in Windows error no Audio output device is installed.

    Original title: no audio after update of the web browser (Vista) I recently updated my browser Windows 9 for Vista.  Since that time, all the sounds disappeared from my laptop.  The speaker icon in the lower right corner of my bed, "no Audio output d