Mouse and keyboard does not work after sleeping on a laptop

Similar Questions

• Trackpad and keyboard does not work after upgrade to Windows 10

  Trackpad and keyboard do not work after the upgrade to Windows 10 in Boot Camp on a MacBook Pro in early 2011. So, I'm unable to enter password. How to connect? Can I go back to Windows 8?

  1. you can turn off your Mac and your power it back up and hold the Alt/Option key.

  2. you can also run the following procedures to restore the OS default.

  3. If you use a Mac 2010 to run W10, officially Apple does not support the combination. Older than 2012 Mac is not supported for the W10.

  4. Please see also Boot Camp: the operating system default value .

• keyboard does not work after sleep

  I have a light keyboard Logitech model Y-UY95. When the awakening of the mode standby the keyboard does not work.  Anything can be typed. I have to restart Windows 8 and then it works again.

  Had a similar problem on a HP Elitepad 900 go to sleep and not waking up... update the firmware/bios fixed it.  This known problem when I called HP, was not documented any wher however

• When I work on my sys after every 15 min to 20 min my mouse and keyboard does not work

  Hi all
  Please can someone give me a good answer

  When I'm working on my sys after every 15 min to 20 min, my mouse and keyboard work not and totslly my sys cling...

  Hi Suresh,

  Thanks for posting your query in Microsoft Community.

  According to the description of the problem, it seems your keyboard and mouse stops working, and also Windows 7 crashes.

  I will certainly help you in this matter.

  1. What is the brand and model of your computer, the keyboard and the mouse?

  2 have had any changes made to the computer before the show?

  Please follow the methods.

  Method 1:

  Run the troubleshooter from the link.

  http://Windows.Microsoft.com/en-in/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  Update the drivers for the keyboard and mouse.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-in/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 3:

  Follow the steps in the link.

  Crashes Windows or freezes

  http://support.Microsoft.com/kb/2681286

  Using the windows-related issues feel free to post on the Microsoft Community Forum.

• Qosmio G30-163 mouse and keyboard does not work properly

  Hi all

  I installed an update of the firmware of the toshiba site. I think that the upgrade was for the dvd but am not sure. I just saw an available upgrade and installed. Stupid of me. The dvd drive has been previously not recording. If after installing the update of the firmware I has not restarted the machine. In the meantime, I forgot the upgrade and then I did to fix the error of dvd

  "Start the Registry Editor (start, run and type regedit and click on).

  Search for "UpperFilters" and "LowerFilters" (and "UpperFilters.bak" "LowerFilters.bak", if they exist) value under the following key in the registry and delete it:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  Exit the registry editor.

  Reset. »

  Now, after restart the keyboard and the mouse does not work. I can't go in safe mode because I can't press ok for the user login screen. I have attached an external keyboard, but it still does not work.

  I use windows xp, I have a lot of data. I can't do anything. If anyone has any idea please help me. The laptop is out of warranty. I'm stuck. Help, please.

  John

  S rally strange because I put t see a link between the firmware CD/DVD, UpperFilters and LowerFilters and the keyboard and mouse.

  This is first time that a removal of the upper and lower filters would undermine the functionality of keyboard and mouse. Which is really strange.

  Anyway, you are able to access the BIOS? If this isn't the case, then this is not good.

  First of all, you should try to save the data stored on the HARD disk in this case, I recommend to remove the laptop HARD drive and connect it using a USB HDD on another controller.
  This would allow you to save the data to another HARD disk.

  Put the removed HARD disk in Notepad, and then try to reinstall the OS from the Toshiba restore CD.
  I hope that this will be possible because I don't see another way to get the operating system again.

  Good luck by a friend

• Satellite U940 - backlit keyboard does not work after sleep

  If my computer goes to sleep the light most of the time does not work. CTRL-Z is nothing.

  I have reset the values by default and still no luck. I need to reboot to get it to work again.

  I see it as one problem for others:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=70512

  Looks like you have created several post on the same topic:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=71599
  Recommend to follow a thread to avoid misunderstandings.

• How to fix this upgrade Windows 8.1, my mouse and keyboard would not work after the upgrade

  Good day, I recently updated my OS to Windows 8.1 from the store windows, at the end of the upgrade, I discovered that the keyboard and mouse to my laptop did not work again. I use a HP Pavilion 17, came pre-installed with Win8 and I don't really know how to solve this problem. I restored back the system to a previous date when it was working, at least to allow me use my PC but I get notification of upgrade HP. How can home, I solve this problem?

  Go to the HP support website and search for drivers Windows 8.1 for your specific model number. Also check the recent updates of Windows 8 pilot even if your PC came with Windows preinstalled 8.
  http://welcome.HP.com/country/us/en/support.html

  J W Stuart: http://www.pagestart.com

• Tecra S1 keyboard does not work after sleep

  I started using an edition of comfort Office Microsft wireless as an external keyboard and mouse.

  When my Tecra s1 will switch to standby mode standard internal keyboard stops working. So, I can not enter the startup password.

  The external keyboard is listed as connected even when it is not.

  Any ideas?

  Hello

  Has this issue occurred until you used the external keyboard?
  My suggestion is the edition of Office Microsoft Wireless comfort has a bad influence on the internal keyboard.

• Mouse and keyboard do not work after you have connected the iPod

  I don't have in my possession this maching XP yet as it is my niece.

  When it has connected his iPod, the configuration and the keyboard work more fully. Start in safe mode did not help, she said.

  Any suggestions for when I'll be at the computer?

  Thank you

  Hi dux.

  You can check what are the other USB devices on the computer.

  Often when there is a failure in one device in the USB chain, it can prevent the operation in other USB devices.

  You can try the iPod in another USB port on the computer.

  You can also remove a powered hub if one is connected between the device and the computer.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Bitmoji keyboard does not work after last update iOS 10

  My Bitmoji keyboard does not work after that I updated to iOS 10 update. I have no idea why, my friends Bitmoji keyboard works fine after that she has updated her phone and mine does not work so I was wondering why. It worked perfectly fine before I upgraded my phone. I was wondering what to do.

  the same problem. He repeats to me go to keyboard settings and make sure that it says allows full access to Bitmoji and it does. Should not have upgraded to iOS.

• Keyboard does not work after authentication on the RDS Session host

  When you connect to the RDS through the access portal or app keyboard does not work after authentication on the RDS session host. Offline authentication works very well, past will guide you to the RDS host, then when you try to reset your password, the keyboard does not work.

  Has anyone else had that... ?

  Options (some better than others!) are:

  1. move all MS applications seamless

  2. have an application named "Reset your password" (or similar) which uses MS Seamless.then you can leave other applications, as they are

  3 disable authentication carried forward and implemented our service reset password instead so people reset their password before can connect you.

  4. use the full desktop instead of transparent

• Mouse and keyboard does not not to login screen (Windows 7)

  As far as I know, an update of windows was held last night. When I try to log on to my office (gateway), my keyboard and mouse (Logitech M310 K520) do not work. I tried to connect in safe mode, but still no luck. I can press F8 before it connects to enter advanced startup options. I went in the selection 'repair your computer', and my mouse and keyboard work fine. I tried a system restore, run the Diagnostics, memory windows and tried several reboots, but without any difficulty. I have tried other mice, tried different USB slots, but all have the same problems. They work very well until what the login screen and then do not respond.

  Please let me know what are my options to resolve this problem. Would like to try more things on my own first of all, but I'm a bit of a novice in computer science.

  Hello

  I suggest to consult these links and perform the steps:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/mouse-and-keyboard-do-not-work-at-login-screen/7097129d-2a2d-4e13-b7ef-d51300b4acf8

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/mouse-and-keyboard-not-working-at-login-screen/4d759699-f514-4c1d-9ADF-a5724a3ad1e6

  I hope this helps.

• End of 2012 iMac keyboard does not respond after sleep

  I have an iMac late 2012 and my keyboard does not respond after that lay down the computer.  When I type the password box is very slowly filled with random letters that are not my password and hit enter just adds another letter.  In my view, that it is a common problem that I am many have known for a few months.  Is there a solution to this I have reset PRAM and SMC, and no work.  It's very irritating and I hoped with every update from El Capitan, this would have been fixed, but not joy.

  I don't know about "modern" Mac and OS X versions, but on my old Powerbook / Tiger awakened from his sleep, it was necessary to 'click' somewhere (I clicked on always in the password field) before the same keyboard would meet all

• Satellite A665-S6086 - keyboard does not work after the outpouring of fluid

  I have a Toshiba Satellite A665-S6086 laptop. A couple of months, I spilled the zeroth power and he went on the keyboard. I'm sure that some went through it as well. The computer turns now and I can use an external mouse and external keyboard. Nothing on my keyboard does not work as well as the mouse. I can't go on the internet due to not being able to use the F8 key so.

  The only key/button that works is the power button. The dvd/cd drive works.
  Help, please.

  The external key board I use has no FN key. a f1 to f12, but when I hit the button on the external key board f8 nothing. Please help me get internet light somehow.

  Thank you

  And what kind of help do you expect now? What can we do?
  Why you n t fix it and be happy with the new keyboard?
  How long you want to use your laptop in such a State?

  Contact Toshiba service, let them swap keyboard and clean your laptop. OK it's a bit chilly but you'll well workbook again.

• Equium M50-235: the keyboard does not work after upgrde memory

  I just did an upgrade memory on my laptop using the second slot located under the keyboard.
  However, as I was putting the keyboard at the rear, the ribbon cable has pulled away from the motherboard and even if I pushed
  Reconnect and fixed with the clip, the keyboard no longer works.

  Is there a service manual I can get hold of someone know what could be the cause of the problem?

  Thank you!

  Hello

  First of all, once you unscrew the keyboard, open the clip that secures it in place and reinstall the keyboard by ensuring that it is completely down. After that, now the flat cable in place, close the clip. Then, make sure that it is not lost and that it is seated correctly. Then turn on the laptop and see if it works. If this is not the case, try an external keyboard. If an external keyboard does not work, the keyboard on your MB controller is dead and you need a new MB. If an external keyboard works then your keyboard is dead, or the connector on the MB is dead. Best way to test is to try the first solution. If it doesn't work, take it to an ASP so they can try another keyboard for your laptop. Good luck.