mouse and screen windows freeze-up during the operating mode normal ok in safe mode

Remember - this is a public forum so never post private information such as numbers of mail or telephone!

Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • re installed the OS, but the problem persists

Hello

What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
on this machine, including those you have uninstalled (they leave leftovers behind which can cause
strange problems).

----------------------------------------------------

Follow these steps:

Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

Enter this at the command prompt - sfc/scannow

How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228

Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

==========================================

After the foregoing:

How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135
How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685

Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
reference (if you have a small box at the bottom left - show for all users, then check that).

How to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

A quick check to see that load method 2 is - using MSCONFIG then put a list of
those here.
--------------------------------------------------------------------

Tools that should help you:

Process Explorer - free - find out which files, key of registry and other objects processes have opened.
What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

Autoruns - free - see what programs are configured to start automatically when you start your system
and you log in. Autoruns also shows you the full list of registry and file locations where applications can
Configure auto-start settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

There are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

-Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
a program that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.html

There are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.html

Window Watcher - free - do you know what is running on your computer? Maybe not. The window
Watcher says it all, reporting of any window created by running programs, if the window
is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.asp

Many excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/

===========================================

Vista and Windows 7 updated drivers love then here's how update the most important.

This is my generic how updates of appropriate driver:

This utility, it is easy see which versions are loaded:

-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.html

For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.

Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.

Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.

Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.

Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.

Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

How to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
get new manually if you wish.

How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

===========================================

Refer to these discussions because many more excellent advice however don't forget to check your antivirus
programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
first.

Problems with the overall speed of the system and performance
http://support.Microsoft.com/GP/slow_windows_performance/en-us

Performance and Maintenance Tips
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

Explorer Windows stopped working
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

Hope these helps.

Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

Tags: Windows

Similar Questions

  • Loading screen is not animated, during the operation, but after

    Hi all!

    Here's my problem: I am display a gif animated using the class presented here.

    It is used in a specific class loader that perform an action, while the gif is displayed (the gif is a spinner). Only once the operation is completed, the LoadingScreen came out of the screen.

    Here's my class loader:

    public class LoadingScreen extends MainScreen {
    
        /**
         * The action to be processed during the loading.
         */
        Runnable action = null;
    
        private AnimatedGIFField _image;
    
        /**
         * Default constructor.
         *
         * @param action the action to manage.
         */
        public LoadingScreen(Runnable action)
        {
            super(FIELD_VCENTER);
            this.setTitle(CommonTools.initTitleBar());
            this.action = action;
    
            displayAnimation();
    
            if(this.action != null)
            {
                UiApplication.getUiApplication().invokeLater(this.action);
            }
        }
    
        /**
         * Display the animation during the loading process.
         */
        private void displayAnimation()
        {
            EncodedImage encImg =
                GIFEncodedImage.getEncodedImageResource("loading.gif");
            GIFEncodedImage img = (GIFEncodedImage) encImg;
    
            _image = new AnimatedGIFField(img);
    
            getMainManager().setBackground(BackgroundFactory.createSolidBackground(Color.BLACK));
    
            LabelField label = new LabelField("Connect..."){
                public void paint(Graphics g)
                {
                    g.setColor(Color.WHITE);
                    super.paint(g);
                    }
            };
    
            HorizontalFieldManager containerSpin = new HorizontalFieldManager(FIELD_HCENTER);
            HorizontalFieldManager containerLabel = new HorizontalFieldManager(FIELD_HCENTER);
            containerSpin.add(_image);
            containerLabel.add(label);
    
            containerSpin.setPadding(Display.getHeight()>>2, 0, 0, 0);
    
            this.add(containerSpin);
            this.add(containerLabel);
    
            KasualApplication.isLoading = true;
        }
    }
    

    The problem is that the gif is not animated, while the action runs. But if I have a popup appears at the end of the action to let the loading screen, I see that the gif is animated. As well as the animation starts when the action is complete.

    I think something is wrong in the clock of my son, but I don't see that.

    Could you please help me?

    Thanks in advance.

    It's ok, the solution is described here.

  • Unable to get Windows XP back to the top, either normally or in Safe Mode, after the download and installation of the SP3

    Installed Service Pack 3 from Windows Update, now I can't get Windows XP to go back upwards, in the normal way or in any configuration of Safe Mode.  I am in the Recovery Console using my drive now.

    ohnooo313,
    Follow the steps on this post on the forum.  If these elements do not help, then follow the instructions that apply to this article.

    Post back with the results. Mike - Engineer Support Microsoft Answers
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • The web page freezes several times during the operation, recovers after about 3-20 minutes, freezes again. Also, lately, the screen lights up and sparkles in a pink/purple color

    I use Internet Explorer as my search engine and internet as my default msn.ca. The web page freezes several times during the operation, recovers after about 3-20 minutes, freezes again. Also, lately, the screen lights up and flashes in a pink/purple one color recovers to normal in 30 seconds approximately. I had an attempt of technician paid for help but couldn't. Can anyone help? Thank you

    Go to start / Control Panel / Internet Options / Advanced section then check the top box rendered = software use instead of gpu rendering / apply then OK.

    Restart all open windows ie11.

    For memory, Bing is a search engine ie11 is a browser and msn... is a home page.

    Any other number symbol use Gear and manage add-ons and toolbars and extensions and disable Adobe Shockwave element

  • Windows 8 crashed during the last update, now wants to save and may not do.

    Windows 8 crashed during the last update. Stuck at 30% for more than 4 hours before I finally pressed the power button to restart the system. Windows 8 Pro with Media Center now says system build 9200 at the bottom right of the screen.

    Whenever I try to activate Windows 8, it cannot connect. When you use the command prompt Windows + R and slui 3 with my purchased serial number I get Code 0 x 80070424. Description: The specified service does not exist as an installed service.

    Hello

    This error can appear if your firewall settings prevent Windows to complete the online activation process. To resolve this problem, you can activate Windows by phone instead.

    1. Enter in the right edge of the screen and then click on Search.
      (If you use a mouse, point to the upper right of the screen, move the pointer of the mouse down and then click find.)
    2. Type SLUI 04 in the search box, type or click on applicationsand then tap or click SLUI 04.
    3. Follow the instructions on the screen.

    Hope this helps

  • I continued to have this message flashing on the screen "ERROR of LOADING of THE OPERATING SYSTEM" after the restart when loading the software Window XP.

    Original title: someone help please?

    Working on my old computer, a pentium 4, card mother GA81PE1000, I continued to have this message flashing on the screen "ERROR of LOADING of THE OPERATING SYSTEM" after the restart when loading the software Window XP. After so many years, working on the construction of computer & repair, it's new to me.

    So I checked the Microsoft Website for answers from people with the same problem in the past and apply their suggestions, nothing works... hard drive replaced, the changed value in the bios, did everything possible, still nothing works, phenomenal for me, please help me find an answer, thank you?

    Hello

    1. have you made changes on the computer before this problem?
    2 - what you want to say that you receive this error message during the installation of Windows XP?

    Check to see if the following is useful.

    Method 1: Disconnect all devices non-essential connected to the computer and restart. Check to see if it boots normally.

    Method 2: You may need to check the settings of the BIOS (Basic Input\Output System). Check if the hard drive is detected. If this is not the case, check the physical connections. Refer to the manual to check the same.

    Warning of the BIOS:

    BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

    The following article might be useful: "Error loading operating system" Error Message When you restart your computer during installation

  • I had (screen attached) error message during the installation of "Silverlight_Developer.exe".

    I had (screen attached) error message during the installation of "Silverlight_Developer.exe". Please do the needful.
    Operating system: Windows XP

    Hello

    I suggest you to send your query forums Microsoft Silverlight to enhance assistance about the Silverlight developer issue.

    http://forums.Silverlight.NET/

     

    http://www.Silverlight.NET/community

  • With ten windows error code during the installation of CS4 design standard

    With ten windows error code during the installation of CS4 design standard

    What a code of error NUMBER or text message?

    CS4 is REALLY OLD and can not (probably won't) works with Windows 10

    An idea that MAY work to install or run some programs in Windows 10 old... works for some, not for others

    -http://www.tenforums.com/tutorials/15523-compatibility-mode-settings-apps-change-windows-1 0 - a.html

    - or run as Administrator http://forums.adobe.com/thread/969395 to assign FULL permissions can help... said yet, but sometimes it is necessary for all Adobe programs (this is same as using an administrator account)

  • Whenever I try to update my iPhone 6 for the ios10 it is said it is impossible and that an error occurred during the installation? I ' have enough free space, so I'm not real why he keeps now.

    Whenever I try to update my iPhone 6 for the ios10 it is said it is impossible and that an error occurred during the installation? I ' have enough free space, so I'm not real why he keeps now.

    Try to update via iTunes.

    See you soon,.

    GB

  • What support VMware Windows 7 as a guest host and Windows Server 2003 as the operating system operating system?

    People,

    Hello.

    Because my laptop is preinstalled Windows 7 and cannot dual boot multiple operating systems. I need to install VMware in Windows 7 host and then install Windows Server 2003 as a guest operating system.

    I installed VMware Server 2.0.2 in Windows 7 and Windows Server 2003 operating system as a guest host. Everything works fine for a while. But VMware Server Home Page https://mylaptop:8333 / IU cannot display more.

    I found that Windows 7 is not a host for VMware Server 2 and strange operating system might happen at any time. I found that 'VMware Player 3' is fully supported in Windows 7 as host operating system but is not taken in charge of Windows Server 2003 as a guest operating system.

    People knows what product VMware Windows 7 support as host operating system and Windows Server 2003 as the operating system prompted?

    Thanks in advance

    Hello

    IMHO, I think that Workstation is the vmware product just for you, the requirements

    It supports Windows 7 as a facilitator and Windows 2003 as a host with no problems. You can be confident about it at 100%.

    Best wishes / Saludos.

    Pablo

    Please consider providing any useful answer. Thank you!! - Por favor considered premiar las useful responses. MUCHAS gracias!

    Virtually noob blog

  • Satellite L850D - 12 p: need to copy of Windows 8 to reinstall the operating system

    Hello

    I have a Satellite L850D - 12 p and need a copy of windows 8 to reinstall the operating system

    I deleted all the data on the HD including the recovery partition, I don't envy spening £30 order disks and want to download the

    The supreme macine provided with Windows 8...

    Thank you

    Jaz

    It of not possible to download a recovery image Windows 8!

    If you have not created the disc clean recovery or recovery USB flash stick memory such as mentioned in the user manual, you must order such environment.

  • Windows 7 freezes completely during the launch of the games.

    Everytime I open a game via the main executable file my screen will turn black as the game loads then the computer crashes completely upward and I have to hard reboot it. I have 2 monitor while the game is loading I have my mouse on the second screen so I can see how long it takes to freeze. Ctrl alt del does not work either. Also sometimes when I hit print screen my computer will freeze even when I opened the games. I can get some of the games to work, but I have to have a no cd fixed exe to make it work. I have installed the latest video card drivers so im sure that this is not that.

    Jacob,
    Research on some of the information for your motherboard, it did not appear that there is a driver update for Windows 7 chipset.  You must contact them and see if they have a new driver or if they have heard of the original driver issues in Windows 7.

    Mike - Engineer Support Microsoft Answers
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Mouse and keyboard do not work at the login screen?

    Model: Dell Dimension E521 Windows 7 Ultimate
    My PC has no PS/2 slot.

    The keyboard and mouse work through the BIOS and everything until windows starts.
    Once my PC arrives at 'Starting Windows' screen, my keyboard and mouse stop working. (Their power lights and indicator goes out to Midway through the 'Starting Windows' screen)

    They do not work in safe mode, and I've already restored my PC before the problem of return to.  I tried most of the system repair options in the CD (they work here).  Nothing wrong with the hardware or start.

    May I ask if there is a way for me to restore the registry files and drivers without a clean cloth and do a reinstall customized windows 7?

    EDIT UPDATE: YES! Well, I finally got my PC in safe mode with work keyboard and mouse. I had to restore it when the keyboard and mouse worked always, then to restart and login. Once I connect I force shut down the computer before the keyboard and mouse stop working (peripheral installation failure). Then I run my PC in safe mode and it works.

    Currently back up my files, what should I do now to solve the problem? 1 AM edit: the issue has been resolved after much turmoil. It turns out that the keyboard and mouse working again now that I restarted my PC normally out of safe mode.

  • Mouse and keyboard which is held in the point Windows 8.1 connecting...

    I m using desktop with asus p7h55 m the onboard with map of quadro fx 3700 navida... Windows 7 works great on this system, but now I change my windows to windows 8 (full version and activated), I noticed that when I closed my windows 8 and turn off she also electricity and then when ever I turn on my system my mouse and keyboard stuck on mouse and windows login screen is completely disappears and a keyboard also stuck so if I have directory press the button restart then after once again start works normally but if I stop again by pressing the power button, the problem remains the same... well kindly help me I m new to this forum and I have very annoying him m kindly guide me

    Hello

    That's right, I checked on the Asus site and there is no drivers for motherboard Asus P7H55-M LX. Let us try to install the drivers for Windows 7 in compatibility mode and check if it helps. TO install a driver in compatibility mode follow the steps below.

    Make the programs more compatible with this version of Windows

    http://Windows.Microsoft.com/en-in/Windows-8/older-programs-compatible-version-Windows

    Get back to us with the State.

  • reformat and reinstall Windows XP but get the blue screen on the windows configuration page

    I'm trying to reformat and reinstall Windows XP on my Dell XPS400, but I get a blue screen on the Windows installation page that says... A problem has been detected and Windows has shut down to prevent damage to your computer.  How can I make this?  I want to give this computer to my grandchildren.

    Hello

    1. why you try to reinstall Windows XP?

    I suggest you to try the steps below and check if they help to resolve the issue.

    Configure your computer to start from the CD-ROM drive. For more information on how to do this, refer to your computer documentation or contact the manufacturer of your computer. Insert your Windows XP installation CD, and then restart your computer.

    a. when the message Press any key to boot from the CD appears on your screen, press a key to start your computer from the Windows XP CD.

    b. press ENTER when you see the message to install Windows XP nowand then press ENTER is displayed on the Welcome to Setup screen.

    c. do not choose the option to press R to use the Recovery Console.

    d. in the Windows XP licensing agreement, press F8 to accept the license agreement.

    e. make sure that your current installation of Windows XP is selected in the box, and then press R to repair Windows XP.

    f. follow the instructions on the screen to complete the installation.

    See the following link for more details on the repair facility:

    How to perform a repair of Windows XP installation, if a later version of Internet Explorer is installed

    Hope this information is useful.

Maybe you are looking for

  • How to remove ZoneAlarm? Removed addons and Control Panel.

    ZoneAlarm somehow was added to Firefox. I removed ZoneAlarm Control Panel and of Mozilla Firefox addons, but it's still there. It may have been added when I downloaded a program calling living Cookbook.

  • Full Time capsule not deleting files

    I have my MacPro & iMac saved to Time Machine. It works very well to find a lost file. BUT, when HD 2 TB recently completed, he ceased to backup and I had to wipe the HD & start over. I thought that Time Machine would sequentially remove oldest files

  • I need to erase all the data from my old 5 iPhone

    I bought a new 6 iPhone more. I transferred all of my 5s (32 GB, iOS 9.2.1 I don't know the speed of the processor).   Now, I want to erase all personal data on it, or maybe take it back to the factory.  I give the phone to my niece.  Currently, the

  • Photosmart HP 7510 - L:ooking to my reports of Diagnostic quality Print - why so much of more PHA "drops"? ""

    My Photosmart 7510 C311a says it has printed about 7500 pages since I bought it in to November 2011. Tonight, after replacing the ink cartridge Cyan, I ran the alignment of cartridges and then to print the print quality Diagnostic report.  As I was c

  • Icloudservices.exe - point of entry not found

    I am running Windows 7, but at startup get two errors.  I delete ITunes and reinstalled as administrator, but the problem persists. The procedure entry point_objc_init_image could not be located in the dynamic link library objc.dll Second mistake is