Mouse behaves badly after the update MS Mouse and keyboard Center

I use a model wireless MS Mouse 4000 and MS Mouse and keyboard Center worm installed.  Since this update the scrolling behavior does not work correctly.  In a particular program (a simulation game), scrolling works much too fast.  If I go into the centre of keyboard and mouse and adjust the scrolling speed, it works well.  But when I restart the previous settings seem to be lost, so I have to put once again.  I use Win 7-64 bit.  The mouse worked fine before the version.  Any suggestions?  TIA

PS I vaguely recall a default update but can find no trace of that.  Running MS Mouse and keyboard Center seems normal.  There is no obvious command 'save settings', so I guess it does it automatically.


Hi Paul,.

Thanks for posting your question on the Forums of community of Microsoft.

Check out the link and follow the steps in the article:

Troubleshoot the incidents of the response to the mouse or wireless keyboard

See also:

Mouse, touchpad and keyboard with Windows problems

Check out the link and check the number of the update has failed.

See the Windows updates are installed

If you are able to get the number of the update failed, try to install the updates manually.

Hope this solves the problem.

Tags: Windows

Similar Questions

  • Mouse and keyboard Center shows only the keyboard settings

    I have Win7 64 bit and a Microsoft Intellimouse Optical USB. In the last update of IE, the Microsoft Mouse and keyboard Center shows that the keyboard for the configuration of the pushbuttons - MOUSE WITHOUT! When opening the mouse configuration directly in the Panel... only keyboard commands show! The mouse is a 4 button and is reduced to 2 buttons now. I have re-installed the mouse without result. Help!

    Hi Larimar,

    I see that you have some problems with the Microsoft keyboard and mouse after an update. I'll help you with this problem.

    1. What is the brand and model of the computer?

    2. What is the model number of the Microsoft key and mouse Panel?

    3. what security software is installed on the computer?

    4. that update was installed recently?

    Method 1.

    Run the troubleshooter of material and check.

    Follow the link given to open the Hardware Troubleshooter:

    Method 2.

    If you know what update has been installed recently, then you can uninstall or delete this particular update and check.

    Remove an update:

    Method 3.

    System Restore:

    Important: System Restore will return all system files not as documents, email, music, etc., to a previous state. These files of types are completely affected by the restoration of the system. If it was your intention with this tool to recover a deleted file to non-system, try using a file instead of system restore recovery program.

    Method 4.

    You can update drivers and then try to install the update.

    Update a hardware driver that is not working properly: ' t-work properly

    Additional information.

    Support for Microsoft mouse, keyboards, LifeChat, LifeCam & more:

    Let us know if you need assistance with any windows problem. We will be happy to help you.

  • The link to support Microsoft Mouse and keyboard Center appears broken

    I downloaded the last Microsoft Mouse and keyboard Center (version on Windows 7 64 bit). [This now supports Excel with the ergonomic mouse Sculpt, thanks!] I noticed that there is a support link that is supposed to take you to the "Microsoft Hardware Support Page.

    When I selected, it opens which seems to be a broken link. Is anyone else seeing this?

    BTW, it should really be a more easy/obvious way to report this bug, but I couldn't find a (another using telephone support, I guess, but that seems silly). Perhaps it is the location of the broken link? :-)


    Thanks for the update on the issue.

    This seems to be a problem of compatibility on the Internet Explorer 11, sometimes this can be corrected by adding the site to your list of compatibility view.

    Difficulty of the problems to view site with compatibility view

    Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.


    Thank you best regards &,.

    Isha Soni

  • Microsoft Mouse and keyboard Center is not Exchange buttons of the mouse correctly with Windows Remote Desktop

    I use Microsoft Mouse and keyboard Center for years with no problems. For example, version worked well. I use Windows 7 Professional 64 bit.

    I swapped the buttons on my Comfort Optical Mouse 3000 (so that the right button's "click" and the left button displays a context menu, for example). When I connect to a remote computer, traded buttons continue to operate as programmed.

    Just set Windows Update to update my mouse and keyboard Center to the version. Now when I use the Windows Remote Desktop to connect to another computer that is running Windows 7 Professional 64 bit, my button is not honored. In other words, on the local computer, the right button of the mouse is 'click '. On the remote computer, the left mouse button is 'click '. The keys are reversed on the local computer, as I have it configured, but not on the remote computer.

    I called Microsoft and was transferred to various departments. I would like to report this bug, although I have to pay out of pocket, but there seems to be no way to report this bug.

    Is there a way to report this bug to Microsoft? Is there a solution? How can I revert to a previous version of Microsoft Mouse and keyboard Center?

    I suggest to perform a restore of the system to a restore point before the update.

    You can also uninstall the keyboard and the mouse Center programs and features.

    Then, go to this site and download the previous version.

    (I couldn't find any previous version on Microsoft sites, but I checked the file hash values, I downloaded Microsoft previously).

    MD5: 4a2fb26c01d96b25487735da2925f89a

    SHA1: a68199c29a840dc8719c7f644ae14a4b138f65e7

  • How can I swap buttons of the mouse on a--no Microsoft Mouse with Microsoft Mouse and keyboard Center? (I have a Microsoft keyboard).

    I did a new install of Windows 8 on my Dell desktop computer that has a keyboard, Microsoft Natural 4000 and Dell's USB mouse.  Windows 8 Microsoft keyboard recognized and automatically downloaded and installed Microsoft Mouse and keyboard Center version  However, I'm a lefty mouser and installation of the MS mouse & keyboard Center back on my right handed mouse buttons.  (I went to control panel |) Mouse and swapped buttons immediately after installation.)  When I went into the control panel. Applet of the mouse and the keyboard and mouse Center had resumed the first tab of the control panel mouse properties, stating "click here to change the settings for the Microsoft mouse.  This is the tab where the "Swap mouse buttons" is usually.  When the mouse and keyboard Center is launched, it offers only options for the keyboard.  Do I have to abandon my Microsoft keyboard or purchase functions go a Microsoft mouse to get exchanged my mouse buttons?

    How to swap the mouse buttons on my non-Microsoft with Microsoft Mouse and keyboard Manager installed mouse?

    Thank you


    To get all the benefits of Mrs Maes & Bishop, you can buy a MS mouse is compatilble with the Manager, MS software is for devices of Ms and it is unlikely that MS will change their software to accommodate mice made by other sources.

    If you want to keep the Dell mouse, you will need to disable MS M & K Bishop.

  • I was forced to upgrade to Windows Live Messenger, but even after the update of XP and the office, I always an OnCatalogResult: error 0x0072ee6

    I was forced to upgrade to Windows Live Messenger, but even after the update of XP and the office, I always an OnCatalogResult: error 0x0072ee6

    Hi jcyho,

    Thanks for posting. I have a little trouble understanding your question. If possible you can post back with more detailed information, we can help you with this problem.

    Shawn - Support Engineer - MCP, MCDST
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • Bluetooth Arc touch mouse without being detected by the "mouse and keyboard Center."

    The mouse is paired with your PC via bluetooth and works very well.  (Please re-read that last sentence before you send information on how to pair.)

    However, when I open the Microsoft Mouse and keyboard Center, it says "no device detected".  For example, I can't change the settings of the mouse. There are the most annoying rattling noise that I would turn off.

    Have uninstalled Microsoft Mouse and keyboard Center, reinstalled latest version. IM using windows 7.

    Hello Frazer,

    We want to get this support, please follow the steps on how to solve Microsoft Mouse and keyboard issues:

    1. run the hardware store in Windows 7.

    2 steps on how to install the driver in compatibility mode:

    a. do the driver installation file right click and select properties and then tap or click on the Compatibility tab.
    b. check run this program in compatibility mode.

    c. press or click the menu drop down and select a previous operating system, and then tap or click OK.
    d. try to install the driver and verify.

    Let us know how it goes.

    Kind regards

  • Hi - I have an old Adobe Audition 1.5 and I used to be able to hear that I was recording. After the update of computer and reload Adobe Audition 1.5, can no longer hear the recording, but only on playback. Please notify.

    Hi - I have an old Adobe Audition 1.5 and I used to be able to hear that I was recording. After the update of computer and reload Adobe Audition 1.5, can no longer hear the recording, but only on playback. Please notify.

    Monitoring is done through your audio device, no hearing. When you updated your PC, playback of the audio device settings would have been reset. One of them includes the follow-up of the input jack, and that's what you need to restore. Since we do not know which audio device you use, it's all that we can tell you, except that if it is a device internal, you will need to open the volume control options and he change it. It depends on the good OS versions...

  • How to remove Microsoft Mouse and keyboard Center?

    Hello, I look at a log of the events, and I noticed that there was some sort of error with the keyboard. Recommended action was to remove the driver and reinstall. So that's what I did. I have a Microsoft Comfort Curve keyboard 2000. Once I deleted the driver, then I tried to reinstall the driver which is bundled in a package called Microsoft Mouse and keyboard Center. After downloading and extracting, invites a mistake: "this version of the software is already installed on this system. To re - install this software, you must remove it all first, and then rerun Setup from the installation media. For more information about removing a program, see Windows Help. "So, naturally, the first thing I did was look for an uninstall. Hmm, nothing to add or remove programs, there is nothing in the folder of the Start Menu. So the only other thing I could think to do was to delete the files in the C:\ directory, I did. But still, after trying to reinstall this driver, I get this same error. Will you please tell me how to remove this software from my computer, so I can reinstall it, so that I can use the good driver for my keyboard instead of ' HID Keyboard Device. Thank you.

    Hi, I thought about it. Or, at least, I understood how to uninstall. It turns out that Microsoft Mouse and keyboard Center is in Add or remove programs, you just need to search to find it. And I uninstalled. So, I'll just reinstall and go from there.

  • Mouse and keyboard Center does not detect MS Trackball Optical

    When I plugged a Microsoft Trackball Optical on my laptop running Windows 7 Ultimate, it automatically downloaded and installed Microsoft Mouse and Keyboard Center - who said no. Device detected detected.

    Awesome! A Microsoft program that cannot detect automatically detected Microsoft device that is on the list of devices supported. So amazing that I could just cry, laugh or both.

    Strange thing however, on my desktop PC, also under Win 7 Ultimate, there nothing done except that work when I plugged an identical MS Trackball Optical.

    Hi GreggEshelman,

    I suggest to install the keyboard and mouse last Center from the following link and check if it helps.

    Mouse and keyboard Center 2.2 (formerly IntelliPoint IntelliType Pro)

    You can also refer to similar:

    Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

  • Can't install/uninstall Microsoft mouse and keyboard Center!

    Hi, I got problem with the Microsoft Mouse and keyboard Centre because he doesn't identify my touch mouse correctly (classified as a HID-compliant device and not by its name as my Sidewinder X 4 keyboard). I uninstalled from Add/Remove Programs, and I also uninstalled the drivers for my mouse AND my keyboard (because it showed a double receiver device in device manager). I restarted my computer, but when I tried to install the drivers again in the process of installing mouse and keyboard I got an error message telling me that it was already installed. I uninstalled it again (the "ghost" of it is still listed in Add/Remove Programs) and restarted. When I tried to reinstall, I got the message again who told me that it was already installed. This is when strange things began to happen. The program was once again listed in Add/Remove Programs (this time with its icon and not only a "ghost"). I tried uninstalling and received a message telling me that the uninstall process could not be met because some the original installation files have been corrupted or missing. But now, the program has been listed in the Windows Start menu and when I double click it it started an installation process ceased to immediately resume a message that mkc.msi was missing from a temporary file to My Documents, and he could not proceed, so now I can't install or uninstall the cursed thing. I tried to restore my computer but it doesn't solve all problems. I suspect that some registry entries are not deleted properly when the first uninstall process. I don't want to mess with the registry by myself, at least not until I know what registry entries are created by and in connection with the program. Any help would be appreciated.

    Thanks in advance

    Hello spmisik,

    Thank you for the question!

    I'm sorry to know that have problems you with Microsoft Center of mouse and keyboard. As I understand well you can't install/uninstall Microsoft Mouse and keyboard Center.

    I need to ask you some questions to help you best.

    1. the problem persists with a particular application?

    2. were there any changes (hardware or software) to the computer before the show?

    Run the fixit and check.

    Solve problems with programs that cannot be installed or uninstalled

    Answer to us if you are having problems with Microsoft Mouse and keyboard Center or any other issue of Windows, and I'd be happy to help you again and try to correct the problem as soon as possible.

    Good day!

    Hope this information helps.

  • Microsoft Mouse and keyboard Center recognizes not Microsoft Wireless Notebook Optical Mouse 3000 says no device detected

    Original title: Microsoft Mouse and keyboard Center does not recognize my Microsoft Wireless Notebook Optical Mouse 3000'

    My Microsoft Wireless Notebook Optical Mouse 3000 works fine but when I click on it in the devices section and printers on Panel, Microsoft Mouse and keyboard Center does not recognize. It displays the text "No Device detected". Here is a screenshot of what I see:

    Hi faignard,

    Thanks for the reply. It is regrettable that uninstall the existing mouse device manager drivers did not help to solve the problem.

    I suggest that you go to the program and features under programs installed and check if there are any associated with IntelliPoint software or any software application related to the mouse installed. In the affirmative, please go ahead and uninstall them and then try to install the driver software IntelliPoint 8.2 in compatibility mode as stated in my previous post dated 22 December 2014. See the following link on how to uninstall program:

    Please answer us on the State of the question to help you further.

  • Export or save the settings Microsoft Mouse and keyboard Center


    I use the MMKC on Win7 and I intend to upgrade to Win10.

    Rather than migrate to 10 keeping the existing mess, I would like to get a new installation by reinstalling and then 7 to 10.

    I don't see an option to export the settings in MMKC? I found the folder Documents\Microsoft Hardware\Macros

    containing macros MHM but not the reallocation of the shortcut key.

    Do I have to export the registry settings or y at - it an easier way? Thank you.


    Hey Devin,

    According to the description of the problem, you are ready to export the Microsoft Mouse settings and keyboard Center. I suggest you to return the article mentioned below and see if it helps you to solve the problem.

    How to share and import macros?

    Hope that the information provided is useful. Let us know if you have any concerns related to Windows. We will be more than happy to help you.

    Kind regards

  • BlackBerry smartphone app world update does not work after the update of hourglass and error

    I've recently updated blackberry app world on my 8350i curve to the latest version

    and after that all I get is an hourglass and after 10 minutes, I get java.lang eception exception on error memory

    I tried to remove it from the applications menu, battery pulls and all that and I reinstall I get the same thing. is it possible to completely do a fresh install or recover the old version or restore the old version from an another bberry... help this has been driving me crazy for a while now... thanx

    Sorry for the late reply, I've been away for a few days.

    I think that your device operating system may be corrupted. You can try the following:

    1. Backup cell phone:
    2. Backup 3rd party applications:
    3. Perform a new installation of your operating system:

    You can restore the 3rd party applications using Add/Remove program and accessing the file alx for step 2:

    Try to install app world now.

  • Microsoft Optical Trackball not recognized by mouse and keyboard Center 2.2

    I use the mouse Microsoft Optical Trackball USB 1.0 with Windows 7 x 64 on the desktop HP Z210.
    After you have installed update "Microsoft - pointing drawing - Microsoft Hardware USB Mouse", my Intellimouse software has been replaced by v.2.2.173 Center of keyboard and mouse, which explains that he finds not all devices supported.
    Following the procedure described here, I tried to plug my mouse to all available USB ports, but the result was the same.
    Fortunately, all the extra buttons work as before, but there is no way to configure.

    After reviewing this issue, I uninstalled v.2.2 Centre of keyboard and mouse and installed previous from herev.2.1.177. Now everything works fine.

    I unzipped the installation of v.2.2 files both v2.1 and compared the content - apparently in the new version, model files and the description of file INF for my mouse is missing.

Maybe you are looking for

  • Re: Satellite A350 - 20K - error with Disc Creator

    Hi guys: I download an installer for Disc Creator, I installed it successfully but whenever I try to open it there is an error message that's always coming out ErrorAn unexpected error has occurredError code: 32007C-49-00000001

  • HP Photosmart 7525: allow me to scan for e-mail

    Tried scanning to e-mail.  Receive the message that 'impossible to connect to Web Services.  Confirm the Internet access.  Checked the Web Services on Control Panel.  Services Web seems to be on. What should I do to scan messages?  I can scan to the

  • Sending of sequential channels with NI VISA

    Hey everyone, good night. I am a beginner in labview and I am having trouble to send sequential strings to NI VISA. Using NI VISA, I control a peristaltic pump, using USB RS232 converter, and I need to send a string to set the speed, a single string

  • Xbox will not connect to xbox live and said "Uh Oh, seems to have found a bug in the system.

    So I went to a game on my xbox and it froze, I so stop my xbox 360 and turned it. When it was turned on it says not connected to xbox live, so I did the steps and plugged but it got to the last step where it connects to xbox live, and it said unable

  • Windows Mail - creating message rules

    Hello: I created a folder named Gmail in my Windows Mail. I want to have my Gmail sent to my Windows mail. I was able to do this and now I can get my Gmail in Windows Mail in the folder I created. (In Windows Mail, create a new folder and then set Me